Provided by: libdevice-usb-perl_0.37-2_amd64 
NAME
Device::USB - Use libusb to access USB devices. (DEPRECATED)
VERSION
Version 0.37
SYNOPSIS
Device::USB provides a Perl wrapper around the libusb library. This supports Perl code
controlling and accessing USB devices.
use Device::USB;
my $usb = Device::USB->new();
my $dev = $usb->find_device( $VENDOR, $PRODUCT );
printf "Device: %04X:%04X\n", $dev->idVendor(), $dev->idProduct();
$dev->open();
print "Manufactured by ", $dev->manufacturer(), "\n",
" Product: ", $dev->product(), "\n";
$dev->set_configuration( $CFG );
$dev->control_msg( @params );
...
See the libusb manual for more information about most of the methods. The functionality is
generally the same as the libusb function whose name is the method name prepended with
"usb_".
DESCRIPTION
This module is deprecated as of version 0.37. I have not had the time or need to update
the module, and no one has been willing to take it over.
This module provides a Perl interface to the C library libusb. This library supports a
relatively full set of functionality to access a USB device. In addition to the libusb,
functioality, Device::USB provides a few convenience features that are intended to produce
a more Perl-ish interface.
These features include:
• Using the library initializes it, no need to call the underlying usb_init function.
• Object interface reduces namespace pollution and provides a better interface to the
library.
• The find_device method finds the device associated with a vendor id and product id and
creates an appropriate Device::USB::Device object to manipulate the USB device.
• Object interfaces to the bus and device data structures allowing read access to
information about each.
Device::USB
This class provides an interface to the non-bus and non-device specific functions of the
libusb library. In particular, it provides interfaces to find busses and devices. It also
provides convenience methods that simplify some of the tasks above.
CONSTANTS
This class provides a set of constants for the defined device classes. The constants
defined at this time are:
• CLASS_PER_INSTANCE
• CLASS_AUDIO
• CLASS_COMM
• CLASS_HID
• CLASS_PRINTER
• CLASS_MASS_STORAGE
• CLASS_HUB
• CLASS_DATA
• CLASS_VENDOR_SPEC
FUNCTIONS
new Create a new Device::USB object for accessing the library.
debug_mode
This class method enables low-level debugging messages from the library interface
code.
level
0 disables debugging, 1 enables some debug messages, and 2 enables verbose debug
messages
Any other values are forced to the nearest endpoint.
find_busses
Returns the number of changes since previous call to the function: the number of
busses added or removed.
find_devices
Returns the number of changes since previous call to the function: the number of
devices added or removed. Should be called after find_busses.
find_device
Find a particular USB device based on the vendor and product ids. If more than one
device has the same product id from the same vendor, the first one found is returned.
vendor
the vendor id
product
product id for that vendor
returns a device reference or undef if none was found.
find_device_if
Find a particular USB device based on the supplied predicate coderef. If more than one
device would satisfy the predicate, the first one found is returned.
pred
the predicate used to select a device
returns a device reference or undef if none was found.
list_devices
Find all devices matching a vendor id and optional product id. If called with no
parameters, returns a list of all devices. If no product id is given, returns all
devices found with the supplied vendor id. If a product id is given, returns all
devices matching both the vendor id and product id.
vendor
the optional vendor id
product
optional product id for that vendor
returns a list of devices matching the supplied criteria or a reference to that array
in scalar context
list_devices_if
This method provides a more flexible interface for finding devices. It takes a single
coderef parameter that is used to test each discovered device. If the coderef returns
a true value, the device is returned in the list of matching devices, otherwise it is
not.
pred
coderef to test devices.
For example,
my @devices = $usb->list_devices_if(
sub { Device::USB::CLASS_HUB == $_->bDeviceClass() }
);
Returns all USB hubs found. The device to test is available to the coderef in the $_
variable for simplicity.
list_busses
Return the complete list of information after finding busses and devices.
By using this function, you do not need to do the find_* calls yourself.
returns a reference to an array of busses.
get_busses
Return the complete list of information after finding busses and devices.
Before calling this function, remember to call find_busses and find_devices.
returns a reference to an array of busses.
LIBRARY INTERFACE
The raw api of the libusb library is also :
DeviceUSBDebugLevel()
libusb_init()
libusb_find_busses()
libusb_find_devices()
libusb_get_busses()
libusb_open(void *dev)
libusb_close(void *dev)
libusb_set_configuration(void *dev, int configuration)
libusb_set_altinterface(void *dev, int alternate)
libusb_clear_halt(void *dev, unsigned int ep)
libusb_reset(void *dev)
libusb_get_driver_np(void *dev, int interface, char *name, unsigned int namelen)
libusb_detach_kernel_driver_np(void *dev, int interface)
libusb_claim_interface(void *dev, int interface)
libusb_release_interface(void *dev, int interface)
libusb_control_msg(void *dev, int requesttype, int request, int value, int index, char
*bytes, int size, int timeout)
libusb_get_string(void *dev, int index, int langid, char *buf, size_t buflen)
libusb_get_string_simple(void *dev, int index, char *buf, size_t buflen)
libusb_get_descriptor(void *dev, unsigned char type, unsigned char index, char *buf, int
size)
libusb_get_descriptor_by_endpoint(void *dev, int ep, unsigned char type, unsigned char
index, char *buf, int size)
libusb_bulk_write(void *dev, int ep, char *bytes, int size, int timeout)
libusb_bulk_read(void *dev, int ep, char *bytes, int size, int timeout)
libusb_interrupt_write(void *dev, int ep, char *bytes, int size, int timeout)
libusb_interrupt_read(void *dev, int ep, char *bytes, int size, int timeout)
lib_get_usb_busses()
Return the complete list of information after finding busses and devices.
Before calling this function, remember to call find_busses and find_devices.
returns a reference to an array of busses.
lib_list_busses()
Return the complete list of information after finding busses and devices.
By using this function, you do not need to do the find_* calls yourself.
returns a reference to an array of busses.
lib_find_usb_device( int vendor, int product )
Find a particular device
vendor - the vendor id
product - product id for that vendor
returns a pointer to the device if it is found, NULL otherwise.
lib_debug_mode( int unsafe_level )
Set debugging level: 0: off, 1: some messages, 2: verbose Values outside range are
forced into range.
DIAGNOSTICS
This is an explanation of the diagnostic and error messages this module can generate.
DEPENDENCIES
This module depends on the Carp, Inline and Inline::C modules, as well as the strict and
warnings pragmas. Obviously, libusb must be available since that is the entire reason for
the module's existence.
AUTHOR
G. Wade Johnson (gwadej at cpan dot org) Paul Archer (paul at paularcher dot org)
Houston Perl Mongers Group
Original author: David Davis
BUGS
Please report any bugs or feature requests to "bug-device-usb@rt.cpan.org", or through the
web interface at <http://rt.cpan.org/NoAuth/ReportBug.html?Device::USB>. I will be
notified, and then you'll automatically be notified of progress on your bug as I make
changes.
FOR MORE INFORMATION
The project is hosted at github <https://github.com/gwadej/perl-device-usb/>. More
information on the project, including installation help is available on the Wiki.
LIMITATIONS
So far, this module has only been tested on Linux. It should work on any OS that supports
the libusb library. Several people have reported problems compiling the module on Windows.
In theory, it should be possible to make the library work with LibUsb-Win32
<http://libusb-win32.sourceforge.net/>. Without access to a Windows development system, I
can't make those changes.
The Interfaces and Endpoints are not yet proper objects. The code to extract this
information is not yet written.
ACKNOWLEDGEMENTS
Thanks go to various members of the Houston Perl Mongers group for input on the module.
But thanks mostly go to Paul Archer who proposed the project and helped with the
development.
Thanks to Josep Monés Teixidor for fixing the "bInterfaceClass" bug.
Thanks to Mike McCauley for support of "usb_get_driver_np" and
"usb_detach_kernel_driver_np".
Thanks to Vadim Mikhailov for fixing a compile problem with VC6 on Windows and then
chipping in again for VS 2005 on Windows, and yet again to fix warnings on C99-compliant
compilers.
Thanks to John R. Hogheruis for information about modifying the Inline parameters for
compiling with Strawberry Perl on Windows.
Thanks to Tony Shadwick for helping me resolve a problem with bulk_read and
interrupt_read.
COPYRIGHT & LICENSE
Copyright 2006-2013 Houston Perl Mongers
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.