Provided by: libio-async-perl_0.71-1_all 
NAME
"IO::Async::Process" - start and manage a child process
SYNOPSIS
use IO::Async::Process;
use IO::Async::Loop;
my $loop = IO::Async::Loop->new;
my $process = IO::Async::Process->new(
command => [ "tr", "a-z", "n-za-m" ],
stdin => {
from => "hello world\n",
},
stdout => {
on_read => sub {
my ( $stream, $buffref ) = @_;
while( $$buffref =~ s/^(.*)\n// ) {
print "Rot13 of 'hello world' is '$1'\n";
}
return 0;
},
},
on_finish => sub {
$loop->stop;
},
);
$loop->add( $process );
$loop->run;
DESCRIPTION
This subclass of IO::Async::Notifier starts a child process, and invokes a callback when it exits. The
child process can either execute a given block of code (via fork(2)), or a command.
EVENTS
The following events are invoked, either using subclass methods or CODE references in parameters:
on_finish $exitcode
Invoked after the process has exited by normal means (i.e. an exit(2) syscall from a process, or
"return"ing from the code block), and has closed all its file descriptors.
on_exception $exception, $errno, $exitcode
Invoked when the process exits by an exception from "code", or by failing to exec(2) the given command.
$errno will be a dualvar, containing both number and string values. After a successful "exec()" call,
this condition can no longer happen.
Note that this has a different name and a different argument order from "Loop->open_child"'s "on_error".
If this is not provided and the process exits with an exception, then "on_finish" is invoked instead,
being passed just the exit code.
Since this is just the results of the underlying "$loop->spawn_child" "on_exit" handler in a different
order it is possible that the $exception field will be an empty string. It will however always be
defined. This can be used to distinguish the two cases:
on_exception => sub {
my ( $self, $exception, $errno, $exitcode ) = @_;
if( length $exception ) {
print STDERR "The process died with the exception $exception " .
"(errno was $errno)\n";
}
elsif( ( my $status = W_EXITSTATUS($exitcode) ) == 255 ) {
print STDERR "The process failed to exec() - $errno\n";
}
else {
print STDERR "The process exited with exit status $status\n";
}
}
CONSTRUCTOR
new
$process = IO::Async::Process->new( %args )
Constructs a new "IO::Async::Process" object and returns it.
Once constructed, the "Process" will need to be added to the "Loop" before the child process is started.
PARAMETERS
The following named parameters may be passed to "new" or "configure":
on_finish => CODE
on_exception => CODE
CODE reference for the event handlers.
Once the "on_finish" continuation has been invoked, the "IO::Async::Process" object is removed from the
containing IO::Async::Loop object.
The following parameters may be passed to "new", or to "configure" before the process has been started
(i.e. before it has been added to the "Loop"). Once the process is running these cannot be changed.
command => ARRAY or STRING
Either a reference to an array containing the command and its arguments, or a plain string containing the
command. This value is passed into perl's exec(2) function.
code => CODE
A block of code to execute in the child process. It will be called in scalar context inside an "eval"
block.
setup => ARRAY
Optional reference to an array to pass to the underlying "Loop" "spawn_child" method.
fdn => HASH
A hash describing how to set up file descriptor n. The hash may contain the following keys:
via => STRING
Configures how this file descriptor will be configured for the child process. Must be given one of
the following mode names:
pipe_read
The child will be given the writing end of a pipe(2); the parent may read from the other.
pipe_write
The child will be given the reading end of a pipe(2); the parent may write to the other. Since an
EOF condition of this kind of handle cannot reliably be detected, "on_finish" will not wait for
this type of pipe to be closed.
pipe_rdwr
Only valid on the "stdio" filehandle. The child will be given the reading end of one pipe(2) on
STDIN and the writing end of another on STDOUT. A single Stream object will be created in the
parent configured for both filehandles.
socketpair
The child will be given one end of a socketpair(2); the parent will be given the other. The
family of this socket may be given by the extra key called "family"; defaulting to "unix". The
socktype of this socket may be given by the extra key called "socktype"; defaulting to "stream".
If the type is not "SOCK_STREAM" then a IO::Async::Socket object will be constructed for the
parent side of the handle, rather than IO::Async::Stream.
Once the filehandle is set up, the "fd" method (or its shortcuts of "stdin", "stdout" or "stderr")
may be used to access the IO::Async::Handle-subclassed object wrapped around it.
The value of this argument is implied by any of the following alternatives.
on_read => CODE
The child will be given the writing end of a pipe. The reading end will be wrapped by an
IO::Async::Stream using this "on_read" callback function.
into => SCALAR
The child will be given the writing end of a pipe. The referenced scalar will be filled by data read
from the child process. This data may not be available until the pipe has been closed by the child.
from => STRING
The child will be given the reading end of a pipe. The string given by the "from" parameter will be
written to the child. When all of the data has been written the pipe will be closed.
prefork => CODE
Only valid for handles with a "via" of "socketpair". The code block runs after the socketpair(2) is
created, but before the child is forked. This is handy for when you adjust both ends of the created
socket (for example, to use setsockopt(3)) from the controlling parent, before the child code runs.
The arguments passed in are the IO::Socket objects for the parent and child ends of the socket.
$prefork->( $localfd, $childfd )
stdin => ...
stdout => ...
stderr => ...
Shortcuts for "fd0", "fd1" and "fd2" respectively.
stdio => ...
Special filehandle to affect STDIN and STDOUT at the same time. This filehandle supports being configured
for both reading and writing at the same time.
METHODS
pid
$pid = $process->pid
Returns the process ID of the process, if it has been started, or "undef" if not. Its value is preserved
after the process exits, so it may be inspected during the "on_finish" or "on_exception" events.
kill
$process->kill( $signal )
Sends a signal to the process
is_running
$running = $process->is_running
Returns true if the Process has been started, and has not yet finished.
is_exited
$exited = $process->is_exited
Returns true if the Process has finished running, and finished due to normal exit(2).
exitstatus
$status = $process->exitstatus
If the process exited due to normal exit(2), returns the value that was passed to exit(2). Otherwise,
returns "undef".
exception
$exception = $process->exception
If the process exited due to an exception, returns the exception that was thrown. Otherwise, returns
"undef".
errno
$errno = $process->errno
If the process exited due to an exception, returns the numerical value of $! at the time the exception
was thrown. Otherwise, returns "undef".
errstr
$errstr = $process->errstr
If the process exited due to an exception, returns the string value of $! at the time the exception was
thrown. Otherwise, returns "undef".
fd
$stream = $process->fd( $fd )
Returns the IO::Async::Stream or IO::Async::Socket associated with the given FD number. This must have
been set up by a "configure" argument prior to adding the "Process" object to the "Loop".
The returned object have its read or write handle set to the other end of a pipe or socket connected to
that FD number in the child process. Typically, this will be used to call the "write" method on, to write
more data into the child, or to set an "on_read" handler to read data out of the child.
The "on_closed" event for these streams must not be changed, or it will break the close detection used by
the "Process" object and the "on_finish" event will not be invoked.
stdin
stdout
stderr
stdio
$stream = $process->stdin
$stream = $process->stdout
$stream = $process->stderr
$stream = $process->stdio
Shortcuts for calling "fd" with 0, 1, 2 or "io" respectively, to obtain the IO::Async::Stream
representing the standard input, output, error, or combined input/output streams of the child process.
EXAMPLES
Capturing the STDOUT stream of a process
By configuring the "stdout" filehandle of the process using the "into" key, data written by the process
can be captured.
my $stdout;
my $process = IO::Async::Process->new(
command => [ "writing-program", "arguments" ],
stdout => { into => \$stdout },
on_finish => sub {
print "The process has finished, and wrote:\n";
print $stdout;
}
);
$loop->add( $process );
Note that until "on_finish" is invoked, no guarantees are made about how much of the data actually
written by the process is yet in the $stdout scalar.
See also the "run_child" method of IO::Async::Loop.
To handle data more interactively as it arrives, the "on_read" key can instead be used, to provide a
callback function to invoke whenever more data is available from the process.
my $process = IO::Async::Process->new(
command => [ "writing-program", "arguments" ],
stdout => {
on_read => sub {
my ( $stream, $buffref ) = @_;
while( $$buffref =~ s/^(.*)\n// ) {
print "The process wrote a line: $1\n";
}
return 0;
},
},
on_finish => sub {
print "The process has finished\n";
}
);
$loop->add( $process );
If the code to handle data read from the process isn't available yet when the object is constructed, it
can be supplied later by using the "configure" method on the "stdout" filestream at some point before it
gets added to the Loop. In this case, "stdin" should be configured using "pipe_read" in the "via" key.
my $process = IO::Async::Process->new(
command => [ "writing-program", "arguments" ],
stdout => { via => "pipe_read" },
on_finish => sub {
print "The process has finished\n";
}
);
$process->stdout->configure(
on_read => sub {
my ( $stream, $buffref ) = @_;
while( $$buffref =~ s/^(.*)\n// ) {
print "The process wrote a line: $1\n";
}
return 0;
},
);
$loop->add( $process );
Sending data to STDIN of a process
By configuring the "stdin" filehandle of the process using the "from" key, data can be written into the
"STDIN" stream of the process.
my $process = IO::Async::Process->new(
command => [ "reading-program", "arguments" ],
stdin => { from => "Here is the data to send\n" },
on_finish => sub {
print "The process has finished\n";
}
);
$loop->add( $process );
The data in this scalar will be written until it is all consumed, then the handle will be closed. This
may be useful if the program waits for EOF on "STDIN" before it exits.
To have the ability to write more data into the process once it has started. the "write" method on the
"stdin" stream can be used, when it is configured using the "pipe_write" value for "via":
my $process = IO::Async::Process->new(
command => [ "reading-program", "arguments" ],
stdin => { via => "pipe_write" },
on_finish => sub {
print "The process has finished\n";
}
);
$loop->add( $process );
$process->stdin->write( "Here is some more data\n" );
Setting socket options
By using the "prefork" code block you can change the socket receive buffer size at both ends of the
socket before the child is forked (at which point it would be too late for the parent to be able to
change the child end of the socket).
use Socket qw( SOL_SOCKET SO_RCVBUF );
my $process = IO::Async::Process->new(
command => [ "command-to-read-from-and-write-to", "arguments" ],
stdio => {
via => "socketpair",
prefork => sub {
my ( $parentfd, $childfd ) = @_;
# Set parent end of socket receive buffer to 3 MB
$parentfd->setsockopt(SOL_SOCKET, SO_RCVBUF, 3 * 1024 * 1024);
# Set child end of socket receive buffer to 3 MB
$childfd ->setsockopt(SOL_SOCKET, SO_RCVBUF, 3 * 1024 * 1024);
},
},
);
$loop->add( $process );
AUTHOR
Paul Evans <leonerd@leonerd.org.uk>