Provided by: libio-stty-perl_0.03-1.1_all 
NAME
IO::Stty - Change and print terminal line settings
SYNOPSIS
# calling the script directly
stty.pl [setting...]
stty.pl {-a,-g,-v,--version}
# Calling Stty module
use IO::Stty;
IO::Stty::stty(\*TTYHANDLE, @modes);
use IO::Stty;
$old_mode=IO::Stty::stty(\*STDIN,'-g');
# Turn off echoing.
IO::Stty::stty(\*STDIN,'-echo');
# Do whatever.. grab input maybe?
$read_password = <>;
# Now restore the old mode.
IO::Stty::stty(\*STDIN,$old_mode);
# What settings do we have anyway?
print IO::Stty::stty(\*STDIN,'-a');
DESCRIPTION
This is the PERL POSIX compliant stty.
INTRO
This has not been tailored to the IO::File stuff but will work with it as indicated.
Before you go futzing with term parameters it's a good idea to grab the current settings
and restore them when you finish.
stty accepts the following non-option arguments that change aspects of the terminal line
operation. A `[-]' before a capability means that it can be turned off by preceding it
with a `-'.
stty parameters
Control settings
[-]parenb
Generate parity bit in output and expect parity bit in input.
[-]parodd
Set odd parity (even with `-').
cs5 cs6 cs7 cs8
Set character size to 5, 6, 7, or 8 bits.
[-]hupcl [-]hup
Send a hangup signal when the last process closes the tty.
[-]cstopb
Use two stop bits per character (one with `-').
[-]cread
Allow input to be received.
[-]clocal
Disable modem control signals.
Input settings
[-]ignbrk
Ignore break characters.
[-]brkint
Breaks cause an interrupt signal.
[-]ignpar
Ignore characters with parity errors.
[-]parmrk
Mark parity errors (with a 255-0-character sequence).
[-]inpck
Enable input parity checking.
[-]istrip
Clear high (8th) bit of input characters.
[-]inlcr
Translate newline to carriage return.
[-]igncr
Ignore carriage return.
[-]icrnl
Translate carriage return to newline.
[-]ixon
Enable XON/XOFF flow control.
[-]ixoff
Enable sending of stop character when the system input buffer is almost full, and
start character when it becomes almost empty again.
Output settings
[-]opost
Postprocess output.
Local settings
[-]isig
Enable interrupt, quit, and suspend special characters.
[-]icanon
Enable erase, kill, werase, and rprnt special characters.
[-]echo
Echo input characters.
[-]echoe, [-]crterase
Echo erase characters as backspace-space-backspace.
[-]echok
Echo a newline after a kill character.
[-]echonl
Echo newline even if not echoing other characters.
[-]noflsh
Disable flushing after interrupt and quit special characters.
* Though this claims non-posixhood it is supported by the perl POSIX.pm.
[-]tostop (np)
Stop background jobs that try to write to the terminal.
Combination settings
ek Reset the erase and kill special characters to their default values.
sane
Same as:
cread -ignbrk brkint -inlcr -igncr icrnl -ixoff opost
isig icanon echo echoe echok -echonl -noflsh -tostop
also sets all special characters to their default values.
[-]cooked
Same as:
brkint ignpar istrip icrnl ixon opost isig icanon
plus sets the eof and eol characters to their default values if they are the same as
the min and time characters. With `-', same as raw.
[-]raw
Same as:
-ignbrk -brkint -ignpar -parmrk -inpck -istrip -inlcr -igncr
-icrnl -ixon -ixoff -opost -isig -icanon min 1 time 0
With `-', same as cooked.
[-]pass8
Same as:
-parenb -istrip cs8
With `-', same as parenb istrip cs7.
dec Same as:
echoe echoctl echoke -ixany
Also sets the interrupt special character to Ctrl-C, erase to Del, and kill to Ctrl-U.
Special characters
The special characters' default values vary from system to system. They are set with the
syntax `name value', where the names are listed below and the value can be given either
literally, in hat notation (`^c'), or as an integer which may start with `0x' to indicate
hexadecimal, `0' to indicate octal, or any other digit to indicate decimal. Giving a
value of `^-' or `undef' disables that special character.
intr
Send an interrupt signal.
quit
Send a quit signal.
erase
Erase the last character typed.
kill
Erase the current line.
eof Send an end of file (terminate the input).
eol End the line.
start
Restart the output after stopping it.
stop
Stop the output.
susp
Send a terminal stop signal.
Special settings
min N
Set the minimum number of characters that will satisfy a read until the time value has
expired, when <E>-icanon<E> is set.
time N
Set the number of tenths of a second before reads time out if the min number of
characters have not been read, when -icanon is set.
N Set the input and output speeds to N. N can be one of: 0 50 75 110 134 134.5 150 200
300 600 1200 1800 2400 4800 9600 19200 38400 exta extb. exta is the same as 19200;
extb is the same as 38400. 0 hangs up the line if -clocal is set.
OPTIONS
-a Print all current settings in human-readable form.
-g Print all current settings in a form that can be used as an argument to
another stty command to restore the current settings.
-v,--version
Print version info.
Direct Subroutines
stty()
IO::Stty::stty(\*STDIN, @params);
From comments:
I'm not feeling very inspired about this. Terminal parameters are obscure
and boring. Basically what this will do is get the current setting,
take the parameters, modify the setting and write it back. Zzzz.
This is not especially efficent and probably not too fast. Assuming the POSIX
spec has been implemented properly it should mostly work.
show_me_the_crap()
Needs documentation
AUTHOR
Austin Schutz <auschutz@cpan.org> (Initial version and maintenance)
Todd Rinaldo <toddr@cpan.org> (Maintenance)
BUGS
This is use at your own risk software. Do anything you want with it except blame me for it
blowing up your machine because it's full of bugs.
See above for what functions are supported. It's mostly standard POSIX stuff. If any of
the settings are wrong and you actually know what some of these extremely arcane settings
(like what 'sane' should be in POSIX land) really should be, please open an RT ticket.
ACKNOWLEDGEMENTS
None
COPYRIGHT & LICENSE
Copyright 1997 Austin Schutz, all rights reserved.
This program is free software; you can redistribute it and/or modify it under the same
terms as Perl itself.