Provided by: liblist-allutils-perl_0.14-1_all 
NAME
List::AllUtils - Combines List::Util, List::SomeUtils and List::UtilsBy in one bite-sized
package
VERSION
version 0.14
SYNOPSIS
use List::AllUtils qw( first any );
# _Everything_ from List::Util, List::SomeUtils, and List::UtilsBy
use List::AllUtils qw( :all );
my @numbers = ( 1, 2, 3, 5, 7 );
# or don't import anything
return List::AllUtils::first { $_ > 5 } @numbers;
DESCRIPTION
Are you sick of trying to remember whether a particular helper is defined in List::Util,
List::SomeUtils or List::UtilsBy? I sure am. Now you don't have to remember. This module
will export all of the functions that either of those three modules defines.
Note that all function documentation has been shamelessly copied from List::Util,
List::SomeUtils and List::UtilsBy.
Which One Wins?
Recently, List::Util has started including some of the subs that used to only be in
List::SomeUtils. Similar, List::SomeUtils has some small overlap with List::UtilsBy.
"List::AllUtils" always favors the version provided by List::Util, List::SomeUtils or
List::UtilsBy in that order.
The docs below come from List::Util 1.31, List::SomeUtils 0.50, and List::UtilsBy 0.10.
LIST-REDUCTION FUNCTIONS
The following set of functions all reduce a list down to a single value.
reduce BLOCK LIST
Reduces LIST by calling BLOCK, in a scalar context, multiple times, setting $a and $b each
time. The first call will be with $a and $b set to the first two elements of the list,
subsequent calls will be done by setting $a to the result of the previous call and $b to
the next element in the list.
Returns the result of the last call to BLOCK. If LIST is empty then "undef" is returned.
If LIST only contains one element then that element is returned and BLOCK is not executed.
$foo = reduce { $a < $b ? $a : $b } 1..10 # min
$foo = reduce { $a lt $b ? $a : $b } 'aa'..'zz' # minstr
$foo = reduce { $a + $b } 1 .. 10 # sum
$foo = reduce { $a . $b } @bar # concat
If your algorithm requires that "reduce" produce an identity value, then make sure that
you always pass that identity value as the first argument to prevent "undef" being
returned
$foo = reduce { $a + $b } 0, @values; # sum with 0 identity value
The remaining list-reduction functions are all specialisations of this generic idea.
first BLOCK LIST
Similar to "grep" in that it evaluates BLOCK setting $_ to each element of LIST in turn.
"first" returns the first element where the result from BLOCK is a true value. If BLOCK
never returns true or LIST was empty then "undef" is returned.
$foo = first { defined($_) } @list # first defined value in @list
$foo = first { $_ > $value } @list # first value in @list which
# is greater than $value
This function could be implemented using "reduce" like this
$foo = reduce { defined($a) ? $a : wanted($b) ? $b : undef } undef, @list
for example wanted() could be defined() which would return the first defined value in
@list
max LIST
Returns the entry in the list with the highest numerical value. If the list is empty then
"undef" is returned.
$foo = max 1..10 # 10
$foo = max 3,9,12 # 12
$foo = max @bar, @baz # whatever
This function could be implemented using "reduce" like this
$foo = reduce { $a > $b ? $a : $b } 1..10
maxstr LIST
Similar to "max", but treats all the entries in the list as strings and returns the
highest string as defined by the "gt" operator. If the list is empty then "undef" is
returned.
$foo = maxstr 'A'..'Z' # 'Z'
$foo = maxstr "hello","world" # "world"
$foo = maxstr @bar, @baz # whatever
This function could be implemented using "reduce" like this
$foo = reduce { $a gt $b ? $a : $b } 'A'..'Z'
min LIST
Similar to "max" but returns the entry in the list with the lowest numerical value. If the
list is empty then "undef" is returned.
$foo = min 1..10 # 1
$foo = min 3,9,12 # 3
$foo = min @bar, @baz # whatever
This function could be implemented using "reduce" like this
$foo = reduce { $a < $b ? $a : $b } 1..10
minstr LIST
Similar to "min", but treats all the entries in the list as strings and returns the lowest
string as defined by the "lt" operator. If the list is empty then "undef" is returned.
$foo = minstr 'A'..'Z' # 'A'
$foo = minstr "hello","world" # "hello"
$foo = minstr @bar, @baz # whatever
This function could be implemented using "reduce" like this
$foo = reduce { $a lt $b ? $a : $b } 'A'..'Z'
sum LIST
Returns the sum of all the elements in LIST. If LIST is empty then "undef" is returned.
$foo = sum 1..10 # 55
$foo = sum 3,9,12 # 24
$foo = sum @bar, @baz # whatever
This function could be implemented using "reduce" like this
$foo = reduce { $a + $b } 1..10
sum0 LIST
Similar to "sum", except this returns 0 when given an empty list, rather than "undef".
KEY/VALUE PAIR LIST FUNCTIONS
The following set of functions, all inspired by List::Pairwise, consume an even-sized list
of pairs. The pairs may be key/value associations from a hash, or just a list of values.
The functions will all preserve the original ordering of the pairs, and will not be
confused by multiple pairs having the same "key" value - nor even do they require that the
first of each pair be a plain string.
pairgrep BLOCK KVLIST
Similar to perl's "grep" keyword, but interprets the given list as an even-sized list of
pairs. It invokes the BLOCK multiple times, in scalar context, with $a and $b set to
successive pairs of values from the KVLIST.
Returns an even-sized list of those pairs for which the BLOCK returned true in list
context, or the count of the number of pairs in scalar context. (Note, therefore, in
scalar context that it returns a number half the size of the count of items it would have
returned in list context).
@subset = pairgrep { $a =~ m/^[[:upper:]]+$/ } @kvlist
Similar to "grep", "pairgrep" aliases $a and $b to elements of the given list. Any
modifications of it by the code block will be visible to the caller.
pairfirst BLOCK KVLIST
Similar to the "first" function, but interprets the given list as an even-sized list of
pairs. It invokes the BLOCK multiple times, in scalar context, with $a and $b set to
successive pairs of values from the KVLIST.
Returns the first pair of values from the list for which the BLOCK returned true in list
context, or an empty list of no such pair was found. In scalar context it returns a simple
boolean value, rather than either the key or the value found.
( $key, $value ) = pairfirst { $a =~ m/^[[:upper:]]+$/ } @kvlist
Similar to "grep", "pairfirst" aliases $a and $b to elements of the given list. Any
modifications of it by the code block will be visible to the caller.
pairmap BLOCK KVLIST
Similar to perl's "map" keyword, but interprets the given list as an even-sized list of
pairs. It invokes the BLOCK multiple times, in list context, with $a and $b set to
successive pairs of values from the KVLIST.
Returns the concatenation of all the values returned by the BLOCK in list context, or the
count of the number of items that would have been returned in scalar context.
@result = pairmap { "The key $a has value $b" } @kvlist
Similar to "map", "pairmap" aliases $a and $b to elements of the given list. Any
modifications of it by the code block will be visible to the caller.
pairs KVLIST
A convenient shortcut to operating on even-sized lists of pairs, this function returns a
list of ARRAY references, each containing two items from the given list. It is a more
efficient version of
pairmap { [ $a, $b ] } KVLIST
It is most convenient to use in a "foreach" loop, for example:
foreach ( pairs @KVLIST ) {
my ( $key, $value ) = @$_;
...
}
pairkeys KVLIST
A convenient shortcut to operating on even-sized lists of pairs, this function returns a
list of the the first values of each of the pairs in the given list. It is a more
efficient version of
pairmap { $a } KVLIST
pairvalues KVLIST
A convenient shortcut to operating on even-sized lists of pairs, this function returns a
list of the the second values of each of the pairs in the given list. It is a more
efficient version of
pairmap { $b } KVLIST
OTHER FUNCTIONS
shuffle LIST
Returns the elements of LIST in a random order
@cards = shuffle 0..51 # 0..51 in a random order
List::SomeUtils FUNCTIONS
Junctions
Treatment of an empty list
There are two schools of thought for how to evaluate a junction on an empty list:
• Reduction to an identity (boolean)
• Result is undefined (three-valued)
In the first case, the result of the junction applied to the empty list is determined by a
mathematical reduction to an identity depending on whether the underlying comparison is
"or" or "and". Conceptually:
"any are true" "all are true"
-------------- --------------
2 elements: A || B || 0 A && B && 1
1 element: A || 0 A && 1
0 elements: 0 1
In the second case, three-value logic is desired, in which a junction applied to an empty
list returns "undef" rather than true or false.
Junctions with a "_u" suffix implement three-valued logic. Those without are boolean.
all BLOCK LIST
all_u BLOCK LIST
Returns a true value if all items in LIST meet the criterion given through BLOCK. Sets $_
for each item in LIST in turn:
print "All values are non-negative"
if all { $_ >= 0 } ($x, $y, $z);
For an empty LIST, "all" returns true (i.e. no values failed the condition) and "all_u"
returns "undef".
Thus, "all_u(@list)" is equivalent to "@list ? all(@list) : undef".
Note: because Perl treats "undef" as false, you must check the return value of "all_u"
with "defined" or you will get the opposite result of what you expect.
any BLOCK LIST
any_u BLOCK LIST
Returns a true value if any item in LIST meets the criterion given through BLOCK. Sets $_
for each item in LIST in turn:
print "At least one non-negative value"
if any { $_ >= 0 } ($x, $y, $z);
For an empty LIST, "any" returns false and "any_u" returns "undef".
Thus, "any_u(@list)" is equivalent to "@list ? any(@list) : undef".
none BLOCK LIST
none_u BLOCK LIST
Logically the negation of "any". Returns a true value if no item in LIST meets the
criterion given through BLOCK. Sets $_ for each item in LIST in turn:
print "No non-negative values"
if none { $_ >= 0 } ($x, $y, $z);
For an empty LIST, "none" returns true (i.e. no values failed the condition) and "none_u"
returns "undef".
Thus, "none_u(@list)" is equivalent to "@list ? none(@list) : undef".
Note: because Perl treats "undef" as false, you must check the return value of "none_u"
with "defined" or you will get the opposite result of what you expect.
notall BLOCK LIST
notall_u BLOCK LIST
Logically the negation of "all". Returns a true value if not all items in LIST meet the
criterion given through BLOCK. Sets $_ for each item in LIST in turn:
print "Not all values are non-negative"
if notall { $_ >= 0 } ($x, $y, $z);
For an empty LIST, "notall" returns false and "notall_u" returns "undef".
Thus, "notall_u(@list)" is equivalent to "@list ? notall(@list) : undef".
one BLOCK LIST
one_u BLOCK LIST
Returns a true value if precisely one item in LIST meets the criterion given through
BLOCK. Sets $_ for each item in LIST in turn:
print "Precisely one value defined"
if one { defined($_) } @list;
Returns false otherwise.
For an empty LIST, "one" returns false and "one_u" returns "undef".
The expression "one BLOCK LIST" is almost equivalent to "1 == true BLOCK LIST", except for
short-cutting. Evaluation of BLOCK will immediately stop at the second true value.
Transformation
apply BLOCK LIST
Applies BLOCK to each item in LIST and returns a list of the values after BLOCK has been
applied. In scalar context, the last element is returned. This function is similar to
"map" but will not modify the elements of the input list:
my @list = (1 .. 4);
my @mult = apply { $_ *= 2 } @list;
print "\@list = @list\n";
print "\@mult = @mult\n";
__END__
@list = 1 2 3 4
@mult = 2 4 6 8
Think of it as syntactic sugar for
for (my @mult = @list) { $_ *= 2 }
insert_after BLOCK VALUE LIST
Inserts VALUE after the first item in LIST for which the criterion in BLOCK is true. Sets
$_ for each item in LIST in turn.
my @list = qw/This is a list/;
insert_after { $_ eq "a" } "longer" => @list;
print "@list";
__END__
This is a longer list
insert_after_string STRING VALUE LIST
Inserts VALUE after the first item in LIST which is equal to STRING.
my @list = qw/This is a list/;
insert_after_string "a", "longer" => @list;
print "@list";
__END__
This is a longer list
pairwise BLOCK ARRAY1 ARRAY2
Evaluates BLOCK for each pair of elements in ARRAY1 and ARRAY2 and returns a new list
consisting of BLOCK's return values. The two elements are set to $a and $b. Note that
those two are aliases to the original value so changing them will modify the input arrays.
@a = (1 .. 5);
@b = (11 .. 15);
@x = pairwise { $a + $b } @a, @b; # returns 12, 14, 16, 18, 20
# mesh with pairwise
@a = qw/a b c/;
@b = qw/1 2 3/;
@x = pairwise { ($a, $b) } @a, @b; # returns a, 1, b, 2, c, 3
mesh ARRAY1 ARRAY2 [ ARRAY3 ... ]
zip ARRAY1 ARRAY2 [ ARRAY3 ... ]
Returns a list consisting of the first elements of each array, then the second, then the
third, etc, until all arrays are exhausted.
Examples:
@x = qw/a b c d/;
@y = qw/1 2 3 4/;
@z = mesh @x, @y; # returns a, 1, b, 2, c, 3, d, 4
@a = ('x');
@b = ('1', '2');
@c = qw/zip zap zot/;
@d = mesh @a, @b, @c; # x, 1, zip, undef, 2, zap, undef, undef, zot
"zip" is an alias for "mesh".
uniq LIST
distinct LIST
Returns a new list by stripping duplicate values in LIST by comparing the values as hash
keys, except that undef is considered separate from ''. The order of elements in the
returned list is the same as in LIST. In scalar context, returns the number of unique
elements in LIST.
my @x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 1 2 3 5 4
my $x = uniq 1, 1, 2, 2, 3, 5, 3, 4; # returns 5
# returns "Mike", "Michael", "Richard", "Rick"
my @n = distinct "Mike", "Michael", "Richard", "Rick", "Michael", "Rick"
# returns '', 'S1', A5' and complains about "Use of uninitialized value"
my @s = distinct '', undef, 'S1', 'A5'
# returns undef, 'S1', A5' and complains about "Use of uninitialized value"
my @w = uniq undef, '', 'S1', 'A5'
"distinct" is an alias for "uniq".
RT#49800 can be used to give feedback about this behavior.
singleton
Returns a new list by stripping values in LIST occurring more than once by comparing the
values as hash keys, except that undef is considered separate from ''. The order of
elements in the returned list is the same as in LIST. In scalar context, returns the
number of elements occurring only once in LIST.
my @x = singleton 1,1,2,2,3,4,5 # returns 3 4 5
Partitioning
after BLOCK LIST
Returns a list of the values of LIST after (and not including) the point where BLOCK
returns a true value. Sets $_ for each element in LIST in turn.
@x = after { $_ % 5 == 0 } (1..9); # returns 6, 7, 8, 9
after_incl BLOCK LIST
Same as "after" but also includes the element for which BLOCK is true.
before BLOCK LIST
Returns a list of values of LIST up to (and not including) the point where BLOCK returns a
true value. Sets $_ for each element in LIST in turn.
before_incl BLOCK LIST
Same as "before" but also includes the element for which BLOCK is true.
part BLOCK LIST
Partitions LIST based on the return value of BLOCK which denotes into which partition the
current value is put.
Returns a list of the partitions thusly created. Each partition created is a reference to
an array.
my $i = 0;
my @part = part { $i++ % 2 } 1 .. 8; # returns [1, 3, 5, 7], [2, 4, 6, 8]
You can have a sparse list of partitions as well where non-set partitions will be undef:
my @part = part { 2 } 1 .. 10; # returns undef, undef, [ 1 .. 10 ]
Be careful with negative values, though:
my @part = part { -1 } 1 .. 10;
__END__
Modification of non-creatable array value attempted, subscript -1 ...
Negative values are only ok when they refer to a partition previously created:
my @idx = ( 0, 1, -1 );
my $i = 0;
my @part = part { $idx[$++ % 3] } 1 .. 8; # [1, 4, 7], [2, 3, 5, 6, 8]
Iteration
each_array ARRAY1 ARRAY2 ...
Creates an array iterator to return the elements of the list of arrays ARRAY1, ARRAY2
throughout ARRAYn in turn. That is, the first time it is called, it returns the first
element of each array. The next time, it returns the second elements. And so on, until all
elements are exhausted.
This is useful for looping over more than one array at once:
my $ea = each_array(@a, @b, @c);
while ( my ($a, $b, $c) = $ea->() ) { .... }
The iterator returns the empty list when it reached the end of all arrays.
If the iterator is passed an argument of '"index"', then it returns the index of the last
fetched set of values, as a scalar.
each_arrayref LIST
Like each_array, but the arguments are references to arrays, not the plain arrays.
natatime EXPR, LIST
Creates an array iterator, for looping over an array in chunks of $n items at a time. (n
at a time, get it?). An example is probably a better explanation than I could give in
words.
Example:
my @x = ('a' .. 'g');
my $it = natatime 3, @x;
while (my @vals = $it->())
{
print "@vals\n";
}
This prints
a b c
d e f
g
Searching
bsearch BLOCK LIST
Performs a binary search on LIST which must be a sorted list of values. BLOCK must return
a negative value if the current element (stored in $_) is smaller, a positive value if it
is bigger and zero if it matches.
Returns a boolean value in scalar context. In list context, it returns the element if it
was found, otherwise the empty list.
bsearchidx BLOCK LIST
bsearch_index BLOCK LIST
Performs a binary search on LIST which must be a sorted list of values. BLOCK must return
a negative value if the current element (stored in $_) is smaller, a positive value if it
is bigger and zero if it matches.
Returns the index of found element, otherwise "-1".
"bsearch_index" is an alias for "bsearchidx".
firstval BLOCK LIST
first_value BLOCK LIST
Returns the first element in LIST for which BLOCK evaluates to true. Each element of LIST
is set to $_ in turn. Returns "undef" if no such element has been found.
"first_value" is an alias for "firstval".
onlyval BLOCK LIST
only_value BLOCK LIST
Returns the only element in LIST for which BLOCK evaluates to true. Sets $_ for each item
in LIST in turn. Returns "undef" if no such element has been found.
"only_value" is an alias for "onlyval".
lastval BLOCK LIST
last_value BLOCK LIST
Returns the last value in LIST for which BLOCK evaluates to true. Each element of LIST is
set to $_ in turn. Returns "undef" if no such element has been found.
"last_value" is an alias for "lastval".
firstres BLOCK LIST
first_result BLOCK LIST
Returns the result of BLOCK for the first element in LIST for which BLOCK evaluates to
true. Each element of LIST is set to $_ in turn. Returns "undef" if no such element has
been found.
"first_result" is an alias for "firstres".
onlyres BLOCK LIST
only_result BLOCK LIST
Returns the result of BLOCK for the first element in LIST for which BLOCK evaluates to
true. Sets $_ for each item in LIST in turn. Returns "undef" if no such element has been
found.
"only_result" is an alias for "onlyres".
lastres BLOCK LIST
last_result BLOCK LIST
Returns the result of BLOCK for the last element in LIST for which BLOCK evaluates to
true. Each element of LIST is set to $_ in turn. Returns "undef" if no such element has
been found.
"last_result" is an alias for "lastres".
indexes BLOCK LIST
Evaluates BLOCK for each element in LIST (assigned to $_) and returns a list of the
indices of those elements for which BLOCK returned a true value. This is just like "grep"
only that it returns indices instead of values:
@x = indexes { $_ % 2 == 0 } (1..10); # returns 1, 3, 5, 7, 9
firstidx BLOCK LIST
first_index BLOCK LIST
Returns the index of the first element in LIST for which the criterion in BLOCK is true.
Sets $_ for each item in LIST in turn:
my @list = (1, 4, 3, 2, 4, 6);
printf "item with index %i in list is 4", firstidx { $_ == 4 } @list;
__END__
item with index 1 in list is 4
Returns "-1" if no such item could be found.
"first_index" is an alias for "firstidx".
onlyidx BLOCK LIST
only_index BLOCK LIST
Returns the index of the only element in LIST for which the criterion in BLOCK is true.
Sets $_ for each item in LIST in turn:
my @list = (1, 3, 4, 3, 2, 4);
printf "uniqe index of item 2 in list is %i", onlyidx { $_ == 2 } @list;
__END__
unique index of item 2 in list is 4
Returns "-1" if either no such item or more than one of these has been found.
"only_index" is an alias for "onlyidx".
lastidx BLOCK LIST
last_index BLOCK LIST
Returns the index of the last element in LIST for which the criterion in BLOCK is true.
Sets $_ for each item in LIST in turn:
my @list = (1, 4, 3, 2, 4, 6);
printf "item with index %i in list is 4", lastidx { $_ == 4 } @list;
__END__
item with index 4 in list is 4
Returns "-1" if no such item could be found.
"last_index" is an alias for "lastidx".
Sorting
sort_by BLOCK LIST
Returns the list of values sorted according to the string values returned by the KEYFUNC
block or function. A typical use of this may be to sort objects according to the string
value of some accessor, such as
sort_by { $_->name } @people
The key function is called in scalar context, being passed each value in turn as both $_
and the only argument in the parameters, @_. The values are then sorted according to
string comparisons on the values returned. This is equivalent to
sort { $a->name cmp $b->name } @people
except that it guarantees the name accessor will be executed only once per value. One
interesting use-case is to sort strings which may have numbers embedded in them
"naturally", rather than lexically.
sort_by { s/(\d+)/sprintf "%09d", $1/eg; $_ } @strings
This sorts strings by generating sort keys which zero-pad the embedded numbers to some
level (9 digits in this case), helping to ensure the lexical sort puts them in the correct
order.
nsort_by BLOCK LIST
Similar to sort_by but compares its key values numerically.
Counting and calculation
true BLOCK LIST
Counts the number of elements in LIST for which the criterion in BLOCK is true. Sets $_
for each item in LIST in turn:
printf "%i item(s) are defined", true { defined($_) } @list;
false BLOCK LIST
Counts the number of elements in LIST for which the criterion in BLOCK is false. Sets $_
for each item in LIST in turn:
printf "%i item(s) are not defined", false { defined($_) } @list;
minmax LIST
Calculates the minimum and maximum of LIST and returns a two element list with the first
element being the minimum and the second the maximum. Returns the empty list if LIST was
empty.
The "minmax" algorithm differs from a naive iteration over the list where each element is
compared to two values being the so far calculated min and max value in that it only
requires 3n/2 - 2 comparisons. Thus it is the most efficient possible algorithm.
However, the Perl implementation of it has some overhead simply due to the fact that there
are more lines of Perl code involved. Therefore, LIST needs to be fairly big in order for
"minmax" to win over a naive implementation. This limitation does not apply to the XS
version.
*By functions
rev_sort_by
rev_nsort_by
@vals = rev_sort_by { KEYFUNC } @vals
@vals = rev_nsort_by { KEYFUNC } @vals
Since version 0.06.
Similar to "sort_by" and "nsort_by" but returns the list in the reverse order. Equivalent
to
@vals = reverse sort_by { KEYFUNC } @vals
except that these functions are slightly more efficient because they avoid the final
"reverse" operation.
max_by
$optimal = max_by { KEYFUNC } @vals
@optimal = max_by { KEYFUNC } @vals
Returns the (first) value from @vals that gives the numerically largest result from the
key function.
my $tallest = max_by { $_->height } @people
use File::stat qw( stat );
my $newest = max_by { stat($_)->mtime } @files;
In scalar context, the first maximal value is returned. In list context, a list of all the
maximal values is returned. This may be used to obtain positions other than the first, if
order is significant.
If called on an empty list, an empty list is returned.
For symmetry with the "nsort_by" function, this is also provided under the name "nmax_by"
since it behaves numerically.
min_by
$optimal = min_by { KEYFUNC } @vals
@optimal = min_by { KEYFUNC } @vals
Similar to "max_by" but returns values which give the numerically smallest result from the
key function. Also provided as "nmin_by"
uniq_by
@vals = uniq_by { KEYFUNC } @vals
Returns a list of the subset of values for which the key function block returns unique
values. The first value yielding a particular key is chosen, subsequent values are
rejected.
my @some_fruit = uniq_by { $_->colour } @fruit;
To select instead the last value per key, reverse the input list. If the order of the
results is significant, don't forget to reverse the result as well:
my @some_fruit = reverse uniq_by { $_->colour } reverse @fruit;
Because the values returned by the key function are used as hash keys, they ought to
either be strings, or at least well-behaved as strings (such as numbers, or object
references which overload stringification in a suitable manner).
partition_by
%parts = partition_by { KEYFUNC } @vals
Returns a key/value list of ARRAY refs containing all the original values distributed
according to the result of the key function block. Each value will be an ARRAY ref
containing all the values which returned the string from the key function, in their
original order.
my %balls_by_colour = partition_by { $_->colour } @balls;
Because the values returned by the key function are used as hash keys, they ought to
either be strings, or at least well-behaved as strings (such as numbers, or object
references which overload stringification in a suitable manner).
count_by
%counts = count_by { KEYFUNC } @vals
Since version 0.07.
Returns a key/value list of integers, giving the number of times the key function block
returned the key, for each value in the list.
my %count_of_balls = count_by { $_->colour } @balls;
Because the values returned by the key function are used as hash keys, they ought to
either be strings, or at least well-behaved as strings (such as numbers, or object
references which overload stringification in a suitable manner).
zip_by
@vals = zip_by { ITEMFUNC } \@arr0, \@arr1, \@arr2,...
Returns a list of each of the values returned by the function block, when invoked with
values from across each each of the given ARRAY references. Each value in the returned
list will be the result of the function having been invoked with arguments at that
position, from across each of the arrays given.
my @transposition = zip_by { [ @_ ] } @matrix;
my @names = zip_by { "$_[1], $_[0]" } \@firstnames, \@surnames;
print zip_by { "$_[0] => $_[1]\n" } [ keys %hash ], [ values %hash ];
If some of the arrays are shorter than others, the function will behave as if they had
"undef" in the trailing positions. The following two lines are equivalent:
zip_by { f(@_) } [ 1, 2, 3 ], [ "a", "b" ]
f( 1, "a" ), f( 2, "b" ), f( 3, undef )
The item function is called by "map", so if it returns a list, the entire list is included
in the result. This can be useful for example, for generating a hash from two separate
lists of keys and values
my %nums = zip_by { @_ } [qw( one two three )], [ 1, 2, 3 ];
# %nums = ( one => 1, two => 2, three => 3 )
(A function having this behaviour is sometimes called "zipWith", e.g. in Haskell, but that
name would not fit the naming scheme used by this module).
unzip_by
$arr0, $arr1, $arr2, ... = unzip_by { ITEMFUNC } @vals
Since version 0.09.
Returns a list of ARRAY references containing the values returned by the function block,
when invoked for each of the values given in the input list. Each of the returned ARRAY
references will contain the values returned at that corresponding position by the function
block. That is, the first returned ARRAY reference will contain all the values returned in
the first position by the function block, the second will contain all the values from the
second position, and so on.
my ( $firstnames, $lastnames ) = unzip_by { m/^(.*?) (.*)$/ } @names;
If the function returns lists of differing lengths, the result will be padded with "undef"
in the missing elements.
This function is an inverse of "zip_by", if given a corresponding inverse function.
extract_by
@vals = extract_by { SELECTFUNC } @arr
Since version 0.05.
Removes elements from the referenced array on which the selection function returns true,
and returns a list containing those elements. This function is similar to "grep", except
that it modifies the referenced array to remove the selected values from it, leaving only
the unselected ones.
my @red_balls = extract_by { $_->color eq "red" } @balls;
# Now there are no red balls in the @balls array
This function modifies a real array, unlike most of the other functions in this module.
Because of this, it requires a real array, not just a list.
This function is implemented by invoking "splice()" on the array, not by constructing a
new list and assigning it. One result of this is that weak references will not be
disturbed.
extract_by { !defined $_ } @refs;
will leave weak references weakened in the @refs array, whereas
@refs = grep { defined $_ } @refs;
will strengthen them all again.
extract_first_by
$val = extract_first_by { SELECTFUNC } @arr
Since version 0.10.
A hybrid between "extract_by" and "List::Util::first". Removes the first element from the
referenced array on which the selection function returns true, returning it.
As with "extract_by", this function requires a real array and not just a list, and is also
implemented using "splice()" so that weak references are not disturbed.
If this function fails to find a matching element, it will return an empty list in list
context. This allows a caller to distinguish the case between no matching element, and the
first matching element being "undef".
weighted_shuffle_by
@vals = weighted_shuffle_by { WEIGHTFUNC } @vals
Since version 0.07.
Returns the list of values shuffled into a random order. The randomisation is not uniform,
but weighted by the value returned by the "WEIGHTFUNC". The probability of each item being
returned first will be distributed with the distribution of the weights, and so on
recursively for the remaining items.
bundle_by
@vals = bundle_by { BLOCKFUNC } $number, @vals
Since version 0.07.
Similar to a regular "map" functional, returns a list of the values returned by
"BLOCKFUNC". Values from the input list are given to the block function in bundles of
$number.
If given a list of values whose length does not evenly divide by $number, the final call
will be passed fewer elements than the others.
EXPORTS
This module exports nothing by default. You can import functions by name, or get
everything with the ":all" tag.
SEE ALSO
List::Util, List::SomeUtils and List::UtilsBy, obviously.
Also see "Util::Any", which unifies many more util modules, and also lets you rename
functions as part of the import.
BUGS
Please report any bugs or feature requests to "bug-list-allutils@rt.cpan.org", or through
the web interface at <http://rt.cpan.org>. I will be notified, and then you'll
automatically be notified of progress on your bug as I make changes.
Bugs may be submitted at <http://rt.cpan.org/Public/Dist/Display.html?Name=List-AllUtils>
or via email to bug-list-allutils@rt.cpan.org <mailto:bug-list-allutils@rt.cpan.org>.
I am also usually active on IRC as 'autarch' on "irc://irc.perl.org".
SOURCE
The source code repository for List-AllUtils can be found at
<https://github.com/houseabsolute/List-AllUtils>.
DONATIONS
If you'd like to thank me for the work I've done on this module, please consider making a
"donation" to me via PayPal. I spend a lot of free time creating free software, and would
appreciate any support you'd care to offer.
Please note that I am not suggesting that you must do this in order for me to continue
working on this particular software. I will continue to do so, inasmuch as I have in the
past, for as long as it interests me.
Similarly, a donation made in this way will probably not make me work on this software
much more, unless I get so many donations that I can consider working on free software
full time (let's all have a chuckle at that together).
To donate, log into PayPal and send money to autarch@urth.org, or use the button at
<http://www.urth.org/~autarch/fs-donation.html>.
AUTHOR
Dave Rolsky <autarch@urth.org>
CONTRIBUTORS
• Karen Etheridge <ether@cpan.org>
• Ricardo Signes <rjbs@cpan.org>
• Yanick Champoux <yanick@babyl.dyndns.org>
COPYRIGHT AND LICENSE
This software is Copyright (c) 2017 by Dave Rolsky.
This is free software, licensed under:
The Artistic License 2.0 (GPL Compatible)
The full text of the license can be found in the LICENSE file included with this
distribution.