NAME

       Net::DBus::Binding::Connection - A connection between client and server

SYNOPSIS

       Creating a connection to a server and sending a message

         use Net::DBus::Binding::Connection;

         my $con = Net::DBus::Binding::Connection->new(address => "unix:path=/path/to/socket");

         $con->send($message);

       Registering message handlers

         sub handle_something {
             my $con = shift;
             my $msg = shift;

             ... do something with the message...
         }

         $con->register_message_handler(
           "/some/object/path",
           \&handle_something);

       Hooking up to an event loop:

         my $reactor = Net::DBus::Binding::Reactor->new();

         $reactor->manage($con);

         $reactor->run();

DESCRIPTION

       An outgoing connection to a server, or an incoming connection from a client. The methods
       defined on this module have a close correspondence to the dbus_connection_XXX methods in
       the C API, so for further details on their behaviour, the C API documentation may be of
       use.

METHODS

       my $con = Net::DBus::Binding::Connection->new(address => "unix:path=/path/to/socket");
           Creates a new connection to the remove server specified by the parameter "address". If
           the "private" parameter is supplied, and set to a True value the connection opened is
           private; otherwise a shared connection is opened. A private connection must be
           explicitly shutdown with the "disconnect" method before the last reference to the
           object is released.  A shared connection must never be explicitly disconnected.

       $status = $con->is_connected();
           Returns zero if the connection has been disconnected, otherwise a positive value is
           returned.

       $status = $con->is_authenticated();
           Returns zero if the connection has not yet successfully completed authentication,
           otherwise a positive value is returned.

       $con->disconnect()
           Closes this connection to the remote host. This method is called automatically during
           garbage collection (ie in the DESTROY method) if the programmer forgets to explicitly
           disconnect.

       $con->flush()
           Blocks execution until all data in the outgoing data stream has been sent. This method
           will not re-enter the application event loop.

       $con->send($message)
           Queues a message up for sending to the remote host.  The data will be sent
           asynchronously as the applications event loop determines there is space in the
           outgoing socket send buffer. To force immediate sending of the data, follow this
           method will a call to "flush". This method will return the serial number of the
           message, which can be used to identify a subsequent reply (if any).

       my $reply = $con->send_with_reply_and_block($msg, $timeout);
           Queues a message up for sending to the remote host and blocks until it has been sent,
           and a corresponding reply received. The return value of this method will be a
           "Net::DBus::Binding::Message::MethodReturn" or "Net::DBus::Binding::Message::Error"
           object.

       my $pending_call = $con->send_with_reply($msg, $timeout);
           Queues a message up for sending to the remote host and returns immediately providing a
           reference to a "Net::DBus::Binding::PendingCall" object. This object can be used to
           wait / watch for a reply. This allows methods to be processed asynchronously.

       $con->dispatch;
           Dispatches any pending messages in the incoming queue to their message handlers. This
           method is typically called on each iteration of the main application event loop where
           data has been read from the incoming socket.

       $message = $con->borrow_message
           Temporarily removes the first message from the incoming message queue. No other thread
           may access the message while it is 'borrowed', so it should be replaced in the queue
           with the "return_message" method, or removed permanently with th "steal_message"
           method as soon as is practical.

       $con->return_message($msg)
           Replaces a previously borrowed message in the incoming message queue for subsequent
           dispatch to registered message handlers.

       $con->steal_message($msg)
           Permanently remove a borrowed message from the incoming message queue. No registered
           message handlers will now be run for this message.

       $msg = $con->pop_message();
           Permanently removes the first message on the incoming message queue, without running
           any registered message handlers. If you have hooked the connection up to an event loop
           ("Net::DBus::Binding::Reactor" for example), you probably don't want to be calling
           this method.

       $con->set_watch_callbacks(\&add_watch, \&remove_watch, \&toggle_watch);
           Register a set of callbacks for adding, removing & updating watches in the
           application's event loop. Each parameter should be a code reference, which on each
           invocation, will be supplied with two parameters, the connection object and the watch
           object. If you are using a "Net::DBus::Binding::Reactor" object as the application
           event loop, then the 'manage' method on that object will call this on your behalf.

       $con->set_timeout_callbacks(\&add_timeout, \&remove_timeout, \&toggle_timeout);
           Register a set of callbacks for adding, removing & updating timeouts in the
           application's event loop. Each parameter should be a code reference, which on each
           invocation, will be supplied with two parameters, the connection object and the
           timeout object. If you are using a "Net::DBus::Binding::Reactor" object as the
           application event loop, then the 'manage' method on that object will call this on your
           behalf.

       $con->register_object_path($path, \&handler)
           Registers a handler for messages whose path matches that specified in the $path
           parameter. The supplied code reference will be invoked with two parameters, the
           connection object on which the message was received, and the message to be processed
           (an instance of the "Net::DBus::Binding::Message" class).

       $con->unregister_object_path($path)
           Unregisters the handler associated with the object path $path. The handler would
           previously have been registered with the "register_object_path" or "register_fallback"
           methods.

       $con->register_fallback($path, \&handler)
           Registers a handler for messages whose path starts with the prefix specified in the
           $path parameter. The supplied code reference will be invoked with two parameters, the
           connection object on which the message was received, and the message to be processed
           (an instance of the "Net::DBus::Binding::Message" class).

       $con->set_max_message_size($bytes)
           Sets the maximum allowable size of a single incoming message. Messages over this size
           will be rejected prior to exceeding this threshold. The message size is specified in
           bytes.

       $bytes = $con->get_max_message_size();
           Retrieves the maximum allowable incoming message size. The returned size is measured
           in bytes.

       $con->set_max_received_size($bytes)
           Sets the maximum size of the incoming message queue.  Once this threshold is exceeded,
           no more messages will be read from wire before one or more of the existing messages
           are dispatched to their registered handlers.  The implication is that the message
           queue can exceed this threshold by at most the size of a single message.

       $bytes $con->get_max_received_size()
           Retrieves the maximum incoming message queue size.  The returned size is measured in
           bytes.

       $con->add_filter($coderef);
           Adds a filter to the connection which will be invoked whenever a message is received.
           The $coderef should be a reference to a subroutine, which returns a true value if the
           message should be filtered out, or a false value if the normal message dispatch should
           be performed.

       my $msg = $con->make_raw_message($rawmsg)
           Creates a new message, initializing it from the low level C message object provided by
           the $rawmsg parameter. The returned object will be cast to the appropriate subclass of
           Net::DBus::Binding::Message.

       my $msg = $con->make_error_message( replyto => $method_call, name => $name, description =>
       $description);
           Creates a new message, representing an error which occurred during the handling of the
           method call object passed in as the "replyto" parameter. The "name" parameter is the
           formal name of the error condition, while the "description" is a short piece of text
           giving more specific information on the error.

       my $call = $con->make_method_call_message( $service_name, $object_path, $interface,
       $method_name);
           Create a message representing a call on the object located at the path $object_path
           within the client owning the well-known name given by $service_name. The method to be
           invoked has the name $method_name within the interface specified by the $interface
           parameter.

       my $msg = $con->make_method_return_message( replyto => $method_call);
           Create a message representing a reply to the method call passed in the "replyto"
           parameter.

       my $signal = $con->make_signal_message( object_path => $path, interface => $interface,
       signal_name => $name);
           Creates a new message, representing a signal [to be] emitted by the object located
           under the path given by the "object_path" parameter. The name of the signal is given
           by the "signal_name" parameter, and is scoped to the interface given by the
           "interface" parameter.

AUTHOR

       Daniel P. Berrange

COPYRIGHT

       Copyright (C) 2004-2011 Daniel P. Berrange

SEE ALSO

       Net::DBus::Binding::Server, Net::DBus::Binding::Bus, Net::DBus::Binding::Message::Signal,
       Net::DBus::Binding::Message::MethodCall, Net::DBus::Binding::Message::MethodReturn,
       Net::DBus::Binding::Message::Error