Provided by: libnet-telnet-cisco-perl_1.10-5.3_all 
NAME
Net::Telnet::Cisco - interact with a Cisco router
SYNOPSIS
use Net::Telnet::Cisco;
my $session = Net::Telnet::Cisco->new(Host => '123.123.123.123');
$session->login('login', 'password');
# Execute a command
my @output = $session->cmd('show version');
print @output;
# Enable mode
if ($session->enable("enable_password") ) {
@output = $session->cmd('show privilege');
print "My privileges: @output\n";
} else {
warn "Can't enable: " . $session->errmsg;
}
$session->close;
DESCRIPTION
Net::Telnet::Cisco provides additional functionality to Net::Telnet for dealing with Cisco
routers.
cmd() parses router-generated error messages - the kind that begin with a '%' - and stows
them in $obj->errmsg(), so that errmode can be used to perform automatic error-handling
actions.
CAVEATS
Before you use Net::Telnet::Cisco, you should have a good understanding of Net::Telnet, so
read it's documentation first, and then come back here to see the improvements.
Some things are easier to accomplish with UCD's C-based SNMP module, or the all-perl
Net::SNMP. SNMP has three advantages: it's faster, handles errors better, and doesn't use
any VTYs on the router. SNMP does have some limitations, so for anything you can't
accomplish with SNMP, there's Net::Telnet::Cisco.
METHODS
new - create new Net::Telnet::Cisco object
$session = Net::Telnet::Cisco->new(
[Autopage => $boolean,] # 1
[More_prompt => $matchop,] # '/(?m:^[\s\0]*--More--)/',
[Always_waitfor_prompt => $boolean,] # 1
[Waitfor_pause => $milliseconds,] # 0.1
[Normalize_cmd => $boolean,] # 1
[Send_wakeup => $when,] # 0
[Ignore_warnings => $boolean,] # 0
[Warnings => $matchop,] # see docs
[Errors => $matchop,] # see docs
# Net::Telnet arguments
[Binmode => $mode,]
[Cmd_remove_mode => $mode,]
[Dump_Log => $filename,]
[Errmode => $errmode,]
[Fhopen => $filehandle,]
[Host => $host,]
[Input_log = => $file,]
[Input_record_separator => $chars,]
[Option_log => $file,]
[Ors = => $chars,]
[Output_log => $file,]
[Output_record_separator => $chars,]
[Port => $port,]
[Prompt = => $matchop,] # see docs
[Rs => $chars,]
[Telnetmode => $mode,]
[Timeout => $secs,]);
);
Creates a new object. Read `perldoc perlboot` if you don't understand that.
login - login to a router
$ok = $obj->login($username, $password);
$ok = $obj->login([Name => $username,]
[Password => $password,]
[Passcode => $passcode,] # for Secur-ID/XTACACS
[Prompt => $match,]
[Timeout => $secs,]);
All arguments are optional as of v1.05. Some routers don't ask for a username, they
start the login conversation with a password request.
cmd - send a command
$ok = $obj->cmd($string);
$ok = $obj->cmd(String => $string,
[Output => $ref,]
[Cmd_remove_mode => $mode,]
[Errmode => $mode,]
[Input_record_separator => $chars,]
[Ors => $chars,]
[Output_record_separator => $chars,]
[Prompt => $match,]
[Rs => $chars,]
[Timeout => $secs,]);
@output = $obj->cmd($string);
@output = $obj->cmd(String => $string,
[Output => $ref,]
[Cmd_remove_mode => $mode,]
[Errmode => $mode,]
[Input_record_separator => $chars,]
[Ors => $chars,]
[Output_record_separator => $chars,]
[Prompt => $match,]
[Rs => $chars,]
[Timeout => $secs,]);
Normalize_cmd has been added to the default Net::Telnet args. It lets you temporarily
change whether backspace, delete, and kill characters are parsed in the command
output. (This is performed by default)
prompt - return control to the program whenever this string occurs in router output
$matchop = $obj->prompt;
$prev = $obj->prompt($matchop);
The default cmd_prompt changed in v1.05. It's suitable for matching prompts like
"router$ ", "router# ", "router> (enable) ", and "router(config-if)# "
Let's take a closer look, shall we?
(?m: # Net::Telnet doesn't accept quoted regexen (i.e. qr//)
# so we need to use an embedded pattern-match modifier
# to treat the input as a multiline buffer.
^ # beginning of line
\r? # optional linefeed
[\w.-]+ # router hostname
\s? # optional space
(?: # Strings like "(config)" and "(config-if)", "(config-line)",
# and "(config-router)" indicate that we're in privileged
\(config[^\)]*\) # EXEC mode (i.e. we're enabled).
)? # The middle backslash is only there to appear my syntax
# highlighter.
\s? # more optional space
[\$#>] # Prompts typically end with "$", "#", or ">". Backslash
# for syntax-highlighter.
\s? # more space padding
(?: # Catalyst switches print "(enable)" when in privileged
\(enable\) # EXEC mode.
)?
\s* # spaces before the end-of-line aren't important to us.
$ # end of line
) # end of (?m:
The default prompt published in 1.03 was
"/^\s*[\w().-]*[\$#>]\s?(?:\(enable\))?\s*$/". As you can see, the prompt was
drastically overhauled in 1.05. If your code suddenly starts timing out after
upgrading Net::Telnet::Cisco, this is the first thing to investigate.
enable - enter enabled mode
$ok = $obj->enable;
$ok = $obj->enable($password);
$ok = $obj->enable(
[Name => $name,]
[Password => $password,]
[Passcode => $passcode,]
[Level => $level,]
);
This method changes privilege level to enabled mode, (i.e. root)
If a single argument is provided by the caller, it will be used as a password. For
more control, including the ability to set the privilege-level, you must use the
named-argument scheme.
enable() returns 1 on success and undef on failure.
is_enabled - Am I root?
$bool = $obj->is_enabled;
A trivial check to see whether we have a root-style prompt, with either the word
"(enable)" in it, or a trailing "#".
Warning: this method will return false positives if your prompt has "#"s in it. You
may be better off calling "$obj->cmd("show privilege")" instead.
disable - leave enabled mode
$ok = $obj->disable;
This method exits the router's privileged mode.
ios_break - send a break (control-^)
$ok = $obj->ios_break( [ additional strings to print, ... ] );
You may have to use errmode(), fork, or threads to break at the an appropriate time.
last_prompt - displays the last prompt matched by prompt()
$match = $obj->last_prompt;
last_prompt() will return '' if the program has not yet matched a prompt.
always_waitfor_prompt - waitfor and cmd prompt behaviour
$boolean = $obj->always_waitfor_prompt;
$boolean = $obj->always_waitfor_prompt($boolean);
Default value: 1
If you pass a Prompt argument to cmd() or waitfor() a String or Match, they will
return control on a successful match of your argument(s) or the default prompt. Set
always_waitfor_prompt to 0 to return control only for your arguments.
This method has no effect on login(). login() will always wait for a prompt.
waitfor_pause - insert a small delay before waitfor()
$boolean = $obj->waitfor_pause;
$boolean = $obj->waitfor_pause($milliseconds);
Default value: 0.1
In rare circumstances, the last_prompt is set incorrectly. By adding a very small
delay before calling the parent class's waitfor(), this bug is eliminated. If you ever
find reason to modify this from it's default setting, please let me know.
autopage - Turn autopaging on and off
$boolean = $obj->autopage;
$boolean = $obj->autopage($boolean);
Default value: 1
IOS pages output by default. It expects human eyes to be reading the output, not
programs. Humans hit the spacebar to scroll page by page so autopage() mimicks that
behaviour. This is the slow way to handle paging. See the Paging EXAMPLE for a faster
way.
normalize_cmd - Turn normalization on and off
$boolean = $obj->normalize_cmd;
$boolean = $obj->normalize_cmd($boolean);
Default value: 1
IOS clears '--More--' prompts with backspaces (e.g. ^H). If you're excited by the
thought of having raw control characters like ^H (backspace), ^? (delete), and ^U
(kill) in your command output, turn this feature off.
Logging is unaffected by this setting.
more_prompt - Matchop used by autopage()
$matchop = $obj->prompt;
$prev = $obj->prompt($matchop);
Default value: '/(?m:^(?:[\s\0]*--More--)/',
Please email me if you find others.
send_wakeup - send a newline to the router at login time
$when = $obj->send_wakeup;
$when = $obj->send_wakeup( 'connect' );
$when = $obj->send_wakeup( 'timeout' );
$when = $obj->send_wakeup( 0 );
Default value: 0
Some routers quietly allow you to connect but don't display the expected login
prompts. Sends a newline in the hopes that this spurs the routers to print something.
'connect' sends a newline immediately upon connection. 'timeout' sends a newline if
the connection timeouts. 0 turns this feature off.
I understand this works with Livingston Portmasters.
ignore_warnings - Don't call error() for warnings
$boolean = $obj->ignore_warnings;
$boolean = $obj->ignore_warnings($boolean);
Default value: 0
Not all strings that begin with a '%' are really errors. Some are just warnings. By
setting this, you are ignoring them. This will show up in the logs, but that's it.
warnings - Matchop used by ignore_warnings().
$boolean = $obj->warnings;
$boolean = $obj->warnings($matchop);
Default value:
'/(?mx:^%\s?Unknown\ VPN
|^%\s?IP\ routing\ table\ VRF.*\ does\ not\ exist\.\ Create\ first$
|^%\s?No\ CEF\ interface\ information
|^%\s?No\ matching\ route\ to\ delete$
|^%\s?Not\ all\ config\ may\ be\ removed\ and\ may\ reappear\ after\ reactivating
|^%\s?Warning:
)/',
Not all strings that begin with a '%' are really errors. Some are just warnings. Cisco
calls these the CIPMIOSWarningExpressions.
errors - Matchop used to catch special-cased errors.
$boolean = $obj->errors;
$boolean = $obj->errors($matchop);
Default value:
'/(?mx:^Unknown\ command\ "[^\"]*"\ Use\ \'help\'\ for\ more\ info\.)/',
Some errors don't begin with a '%'. Trap them here.
EXAMPLES
Paging
v1.08 added internal autopaging support to cmd(). Whenever a '--Page--' prompt appears on
the screen, we send a space right back. It works, but it's slow. You'd be better off
sending one of the following commands just after login():
# To a router
$session->cmd('terminal length 0');
# To a switch
$session->cmd('set length 0');
Logging
Want to see the session transcript? Just call input_log().
e.g.
my $session = Net::Telnet::Cisco->new(Host => $router,
Input_log => "input.log",
);
See input_log() in Net::Telnet for info.
Input logs are easy-to-read translated transcripts with all of the control characters and
telnet escapes cleaned up. If you want to view the raw session, see dump_log() in
Net::Telnet. If you're getting tricky and using print() in addition to cmd(), you may also
want to use output_log().
Big output
Trying to dump the entire BGP table? (e.g. "show ip bgp") The default buffer size is 1MB,
so you'll have to increase it.
my $MB = 1024 * 1024;
$session->max_buffer_length(5 * $MB);
Sending multiple lines at once
Some commands like "extended ping" and "copy" prompt for several lines of data. It's not
necessary to change the prompt for each line. Instead, send everything at once, separated
by newlines.
For:
router# ping
Protocol [ip]:
Target IP address: 10.0.0.1
Repeat count [5]: 10
Datagram size [100]: 1500
Timeout in seconds [2]:
Extended commands [n]:
Sweep range of sizes [n]:
Try this:
my $protocol = ''; # default value
my $ip = '10.0.0.1';
my $repeat = 10;
my $datagram = 1500;
my $timeout = ''; # default value
my $extended = ''; # default value
my $sweep = ''; # default value
$session->cmd(
"ping
$protocol
$ip
$repeat
$datagram
$timeout
$extended
$sweep
");
If you prefer, you can put the cmd on a single line and replace every static newline with
the "\n" character.
e.g.
$session->cmd("ping\n$protocol\n$ip\n$repeat\n$datagram\n"
. "$timeout\n$extended\n$sweep\n");
Backup via TFTP
Backs up the running-confg to a TFTP server. Backup file is in the form "router-confg".
Make sure that file exists on the TFTP server or the transfer will fail!
my $backup_host = "tftpserver.somewhere.net";
my $device = "cisco.somewhere.net";
my $type = "router"; # or "switch";
my $ios_version = 12;
my @out;
if ($type eq "router") {
if ($ios_version >= 12) {
@out = $session->cmd("copy system:/running-config "
. "tftp://$backup_host/$device-confg\n\n\n");
} elsif ($ios_version >= 11) {
@out = $session->cmd("copy running-config tftp\n$backup_host\n"
. "$device-confg\n");
} elsif ($ios_version >= 10) {
@out = $session->cmd("write net\n$backup_host\n$device-confg\n\n");
}
} elsif ($type eq "switch") {
@out = $session->cmd("copy system:/running-config "
. "tftp://$backup_host/$device-confg\n\n\n");
}
Sending control characters
Use print() if you expect to get a prompt back. Use cmd() if you don't.
$session->print("\c^"); # send control-^
$session->cmd("\cZ"); # send control-Z
See also: "ios_break()"
SUPPORT
http://NetTelnetCisco.sourceforge.net/
Mailing lists
nettelnetcisco-announce is for important security bulletins and upgrades. Very low
traffic, no spam, HIGHLY RECOMMENDED!
http://lists.sourceforge.net/lists/listinfo/nettelnetcisco-announce
nettelnetcisco-users is for usage discussion, help, tips, tricks, etc.
http://lists.sourceforge.net/lists/listinfo/nettelnetcisco-users
nettelnetcisco-devel is for uber-hackers; you know who you are.
http://lists.sourceforge.net/lists/listinfo/nettelnetcisco-devel
Help/discussion forums
http://sourceforge.net/forum/?group_id=48856
Bug tracker
http://sourceforge.net/tracker/?group_id=48856
SEE ALSO
Net::Telnet
Net::SNMP
UCD NetSNMP - http://www.netsnmp.org/
RAT/NCAT - http://ncat.sourceforge.net/
AUTHOR
Joshua_Keroes@eli.net $Date: 2002/12/31 00:12:32 $
It would greatly amuse the author if you would send email to him and tell him how you are
using Net::Telnet::Cisco.
As of Mar 2002, over 200 people have emailed me or posted to the Net::Telnet::Cisco site.
N::T::C is used to help manage over 14,000 machines! Keep the email rolling in!
THANKS
The following people understand what Open Source Software is all about. Thanks Brian
Landers, Aaron Racine, Niels van Dijke, Tony Mueller, Frank Eickholt, Al Sorrell, Jebi
Punnoose, Christian Alfsen, Niels van Dijke, Kevin der Kinderen, Ian Batterbee, Leonardo
Cont, Steve Meier, Andre Bonhote, Rob Patrick, FtR, James "mcaizjb3" Brown, and Hiro
"Paul" Protagonist.
Paul gets a ++ for code-ninja skills.
Institutions: infobot.org #perl, perlmonks.org, sourceforge.net, the geeks at
geekhouse.org, and eli.net.
Send in a patch and we can make the world a better place.
COPYRIGHT AND LICENSE
Copyright (c) 2000-2002 Joshua Keroes, Electric Lightwave Inc. All rights reserved. This
program is free software; you can redistribute it and/or modify it under the same terms as
Perl itself.