Provided by: libsnmp-info-perl_3.39-1_all 
NAME
SNMP::Info::Layer2::NWSS2300 - SNMP Interface to Avaya (Trapeze) Wireless Controllers
AUTHOR
Eric Miller
SYNOPSIS
#Let SNMP::Info determine the correct subclass for you.
my $nwss2300 = new SNMP::Info(
AutoSpecify => 1,
Debug => 1,
DestHost => 'myswitch',
Community => 'public',
Version => 2
)
or die "Can't connect to DestHost.\n";
my $class = $nwss2300->class();
print " Using device sub class : $class\n";
DESCRIPTION
Provides abstraction to the configuration information obtainable from Avaya (Trapeze)
Wireless Controllers through SNMP.
This class emulates bridge functionality for the wireless switch. This enables end station
MAC addresses collection and correlation to the thin access point the end station is using
for communication.
For speed or debugging purposes you can call the subclass directly, but not after
determining a more specific class using the method above.
my $nwss2300 = new SNMP::Info::Layer2::NWSS2300(...);
Inherited Classes
SNMP::Info
SNMP::Info::Bridge
Required MIBs
NTWS-REGISTRATION-DEVICES-MIB
NTWS-AP-STATUS-MIB
NTWS-CLIENT-SESSION-MIB
NTWS-SYSTEM-MIB
NTWS-BASIC-MIB
Inherited Classes' MIBs
See "Required MIBs" in SNMP::Info for its own MIB requirements.
See "Required MIBs" in SNMP::Info::Bridge for its own MIB requirements.
GLOBALS
These are methods that return scalar value from SNMP
$nwss2300->vendor()
Returns 'avaya'
$nwss2300->os()
Returns 'trapeze'
$nwss2300->os_ver()
("ntwsVersionString")
$nwss2300->model()
Tries to reference $nwss2300->id() to NTWS-REGISTRATION-DEVICES-MIB
Removes 'ntwsSwitch' for readability.
$nwss2300->serial()
("ntwsSerialNumber")
$nwss2300->mac()
("dot1dBaseBridgeAddress")
Overrides
$nwss2300->layers()
Returns 00000011. Class emulates Layer 2 functionality for Thin APs through
proprietary MIBs.
Global Methods imported from SNMP::Info
See documentation in "GLOBALS" in SNMP::Info for details.
Globals imported from SNMP::Info::Bridge
See documentation in "GLOBALS" in SNMP::Info::Bridge for details.
TABLE METHODS
These are methods that return tables of information in the form of a reference to a hash.
$nwss2300->i_ssidlist()
Returns reference to hash. SSID's recognized by the radio interface.
$nwss2300->i_80211channel()
Returns reference to hash. Current operating frequency channel of the radio
interface.
$nwss2300->dot11_cur_tx_pwr_mw()
Returns reference to hash. Current transmit power, in milliwatts, of the radio
interface.
cd11_mac()
Client MAC address.
AP Status Table ("ntwsApStatApStatusTable")
A table describing all the APs currently present and managed by the controller.
$nwss2300->nwss2300_ap_mac()
("ntwsApStatApStatusBaseMac")
$nwss2300->nwss2300_ap_name()
("ntwsApStatApStatusApName")
$nws2300->nwss2300_ap_ip()
("ntwsApStatApStatusIpAddress")
$nws2300->nwss2300_ap_sw()
("ntwsApStatApStatusSoftwareVer")
$nws2300->nwss2300_ap_fw()
("ntwsApStatApStatusBootVer")
$nws2300->nwss2300_ap_model()
("ntwsApStatApStatusModel")
$nws2300->nwss2300_ap_type()
("ntwsApStatApStatusModel")
$nws2300->nwss2300_ap_status()
("ntwsApStatApStatusApState")
$nws2300->nwss2300_ap_vendor()
("ntwsApStatApStatusManufacturerId")
$nws2300->nwss2300_ap_num()
("ntwsApStatApStatusApNum")
$nws2300->nwss2300_ap_dapnum()
("ntwsApStatApStatusPortOrDapNum")
AP Radio Status Table ("ntwsApStatRadioStatusTable")
A table describing all radios on all the APs currently present and managed by the
controller.
$nws2300->nwss2300_apif_mac()
("ntwsApStatRadioStatusBaseMac")
$nws2300->nwss2300_apif_type()
("ntwsApStatRadioStatusRadioPhyType")
$nws2300->nwss2300_apif_ch_num()
("ntwsApStatRadioStatusCurrentChannelNum")
$nws2300->nwss2300_apif_power()
("ntwsApStatRadioStatusCurrentPowerLevel")
$nws2300->nwss2300_apif_admin()
("ntwsApStatRadioStatusRadioMode")
AP Radio Status Service Table ("ntwsApStatRadioServiceTable")
A table describing radio services associated with APs currently present and managed by the
controller.
$nws2300->nwss2300_apif_bssid()
("ntwsApStatRadioServBssid")
$nws2300->nwss2300_apif_prof()
("ntwsApStatRadioServServiceProfileName")
AP Service Profile Config Table ("ntwsApConfServiceProfileTable")
$nws2300->nwss2300_ess_bcast()
("ntwsApConfServProfBeaconEnabled")
AP Radio Config Table ("ntwsApConfRadioConfigTable")
$nws2300->nwss2300_apcr_txpwr()
("ntwsApConfRadioConfigTxPower")
$nws2300->nwss2300_apcr_ch()
("ntwsApConfRadioConfigChannel")
$nws2300->nwss2300_apcr_mode()
("ntwsApConfRadioConfigRadioMode")
AP Config Table ("ntwsApConfApConfigTable")
$nws2300->nwss2300_apc_descr()
("ntwsApConfApConfigDescription")
$nws2300->nwss2300_apc_loc()
("ntwsApConfApConfigLocation")
$nws2300->nwss2300_apc_name()
("ntwsApConfApConfigApName")
$nws2300->nwss2300_apc_model()
("ntwsApConfApConfigApModelName")
$nws2300->nwss2300_apc_serial()
("ntwsApConfApConfigApSerialNum")
Client Session Table ("ntwsClSessClientSessionTable")
$nws2300->nwss2300_sta_slot()
("ntwsClSessClientSessRadioNum")
$nws2300->nwss2300_sta_serial()
("ntwsClSessClientSessApSerialNum")
$nws2300->nwss2300_sta_ssid()
("ntwsClSessClientSessSsid")
$nws2300->nwss2300_sta_ip()
("ntwsClSessClientSessIpAddress")
Client Session Statistics Table ("ntwsClSessClientSessionStatisticsTable")
These emulate the CISCO-DOT11-MIB
$nws2300->cd11_sigstrength()
("ntwsClSessClientSessStatsLastRssi")
$nws2300->cd11_sigqual()
("ntwsClSessClientSessStatsLastSNR")
$nws2300->cd11_txrate()
("ntwsClSessClientSessStatsLastRate")
$nws2300->cd11_rxbyte()
("ntwsClSessClientSessStatsUniOctetIn")
$nws2300->cd11_txbyte()
("ntwsClSessClientSessStatsUniOctetOut")
$nws2300->cd11_rxpkt()
("ntwsClSessClientSessStatsUniPktIn")
$nws2300->cd11_txpkt()
("ntwsClSessClientSessStatsUniPktOut")
Table Methods imported from SNMP::Info
See documentation in "TABLE METHODS" in SNMP::Info for details.
Table Methods imported from SNMP::Info::Bridge
See documentation in "TABLE METHODS" in SNMP::Info::Bridge for details.
Overrides
$nwss2300->i_index()
Returns reference to map of IIDs to Interface index.
Extends "ifIndex" to support thin APs and WLAN virtual interfaces as device
interfaces.
$nwss2300->interfaces()
Returns reference to map of IIDs to ports. Thin APs are implemented as device
interfaces. The thin AP MAC address and Slot ID nwss2300_apif_slot() are used as the
port identifier.
$nwss2300->i_name()
Returns reference to map of IIDs to interface names. Returns "ifName" for Ethernet
interfaces and nwss2300_ap_name() for thin AP interfaces.
$nwss2300->i_description()
Returns reference to map of IIDs to interface types. Returns "ifDescr" for Ethernet
interfaces, nwss2300_ap_name() for thin AP interfaces.
$nwss2300->i_type()
Returns reference to map of IIDs to interface descriptions. Returns "ifType" for
Ethernet interfaces and 'capwapWtpVirtualRadio' for thin AP interfaces.
$nwss2300->i_up()
Returns reference to map of IIDs to link status of the interface. Returns
"ifOperStatus" for Ethernet interfaces and nwss2300_apif_admin() for thin AP
interfaces.
$nwss2300->i_up_admin()
Returns reference to map of IIDs to administrative status of the interface. Returns
"ifAdminStatus" for Ethernet interfaces and nwss2300_apif_admin() for thin AP
interfaces.
$nwss2300->i_mac()
Returns reference to map of IIDs to MAC address of the interface. Returns
"ifPhysAddress" for Ethernet interfaces.
$nwss2300->bp_index()
Simulates bridge MIB by returning reference to a hash mapping i_index() to the
interface iid.
$nwss2300->fw_port()
Returns reference to a hash, value being mac and nwss2300_sta_slot() combined to match
the interface iid.
$nwss2300->fw_mac()
Extracts the MAC from the nwss2300_sta_serial() index.
Pseudo ARP Cache Entries
The controller snoops on the MAC->IP mappings. Using this as ARP cache data allows us to
get MAC->IP mappings even for stations that only communicate locally. The data is
gathered from nwss2300_sta_ip().
$nwss2300->at_paddr()
Returns reference to hash of Pseudo Arp Cache Entries to MAC address
$nwss2300->at_netaddr()
Returns reference to hash of Pseudo Arp Cache Entries to IP Address
Pseudo ENTITY-MIB information
These methods emulate ENTITY-MIB Physical Table methods using NTWS-AP-STATUS-MIB. Thin
APs are included as subcomponents of the wireless controller.
$nwss2300->e_index()
Returns reference to hash. Key: IID and Value: Integer. The index for APs is created
with an integer representation of the last three octets of the AP MAC address.
$nwss2300->e_class()
Returns reference to hash. Key: IID, Value: General hardware type. Return ap for
wireless access points.
$nwss2300->e_descr()
Returns reference to hash. Key: IID, Value: Human friendly name.
$nwss2300->e_model()
Returns reference to hash. Key: IID, Value: Model name.
$nwss2300->e_name()
More computer friendly name of entity. Name is either 'WLAN Controller' or 'AP'.
$nwss2300->e_vendor()
Returns reference to hash. Key: IID, Value: avaya.
$nwss2300->e_serial()
Returns reference to hash. Key: IID, Value: Serial number.
$nwss2300->e_pos()
Returns reference to hash. Key: IID, Value: The relative position among all entities
sharing the same parent.
$nwss2300->e_type()
Returns reference to hash. Key: IID, Value: Type of component.
$nwss2300->e_fwver()
Returns reference to hash. Key: IID, Value: Firmware revision.
$nwss2300->e_swver()
Returns reference to hash. Key: IID, Value: Software revision.
$nwss2300->e_parent()
Returns reference to hash. Key: IID, Value: The value of e_index() for the entity
which 'contains' this entity.