Provided by: tcl8.5-doc_8.5.19-4_all 
NAME
Tcl_CreateChannel, Tcl_GetChannelInstanceData, Tcl_GetChannelType, Tcl_GetChannelName,
Tcl_GetChannelHandle, Tcl_GetChannelMode, Tcl_GetChannelBufferSize,
Tcl_SetChannelBufferSize, Tcl_NotifyChannel, Tcl_BadChannelOption, Tcl_ChannelName,
Tcl_ChannelVersion, Tcl_ChannelBlockModeProc, Tcl_ChannelCloseProc, Tcl_ChannelClose2Proc,
Tcl_ChannelInputProc, Tcl_ChannelOutputProc, Tcl_ChannelSeekProc, Tcl_ChannelWideSeekProc,
Tcl_ChannelTruncateProc, Tcl_ChannelSetOptionProc, Tcl_ChannelGetOptionProc,
Tcl_ChannelWatchProc, Tcl_ChannelGetHandleProc, Tcl_ChannelFlushProc,
Tcl_ChannelHandlerProc, Tcl_ChannelThreadActionProc, Tcl_IsChannelShared,
Tcl_IsChannelRegistered, Tcl_CutChannel, Tcl_SpliceChannel, Tcl_IsChannelExisting,
Tcl_ClearChannelHandlers, Tcl_GetChannelThread, Tcl_ChannelBuffered - procedures for
creating and manipulating channels
SYNOPSIS
#include <tcl.h>
Tcl_Channel
Tcl_CreateChannel(typePtr, channelName, instanceData, mask)
ClientData
Tcl_GetChannelInstanceData(channel)
Tcl_ChannelType *
Tcl_GetChannelType(channel)
const char *
Tcl_GetChannelName(channel)
int
Tcl_GetChannelHandle(channel, direction, handlePtr)
Tcl_ThreadId
Tcl_GetChannelThread(channel)
int
Tcl_GetChannelMode(channel)
int
Tcl_GetChannelBufferSize(channel)
Tcl_SetChannelBufferSize(channel, size)
Tcl_NotifyChannel(channel, mask)
int
Tcl_BadChannelOption(interp, optionName, optionList)
int
Tcl_IsChannelShared(channel)
int
Tcl_IsChannelRegistered(interp, channel)
int
Tcl_IsChannelExisting(channelName)
void
Tcl_CutChannel(channel)
void
Tcl_SpliceChannel(channel)
void
Tcl_ClearChannelHandlers(channel)
int
Tcl_ChannelBuffered(channel)
const char *
Tcl_ChannelName(typePtr)
Tcl_ChannelTypeVersion
Tcl_ChannelVersion(typePtr)
Tcl_DriverBlockModeProc *
Tcl_ChannelBlockModeProc(typePtr)
Tcl_DriverCloseProc *
Tcl_ChannelCloseProc(typePtr)
Tcl_DriverClose2Proc *
Tcl_ChannelClose2Proc(typePtr)
Tcl_DriverInputProc *
Tcl_ChannelInputProc(typePtr)
Tcl_DriverOutputProc *
Tcl_ChannelOutputProc(typePtr)
Tcl_DriverSeekProc *
Tcl_ChannelSeekProc(typePtr)
Tcl_DriverWideSeekProc *
Tcl_ChannelWideSeekProc(typePtr)
Tcl_DriverThreadActionProc *
Tcl_ChannelThreadActionProc(typePtr)
Tcl_DriverTruncateProc * │
Tcl_ChannelTruncateProc(typePtr) │
Tcl_DriverSetOptionProc *
Tcl_ChannelSetOptionProc(typePtr)
Tcl_DriverGetOptionProc *
Tcl_ChannelGetOptionProc(typePtr)
Tcl_DriverWatchProc *
Tcl_ChannelWatchProc(typePtr)
Tcl_DriverGetHandleProc *
Tcl_ChannelGetHandleProc(typePtr)
Tcl_DriverFlushProc *
Tcl_ChannelFlushProc(typePtr)
Tcl_DriverHandlerProc *
Tcl_ChannelHandlerProc(typePtr)
ARGUMENTS
const Tcl_ChannelType *typePtr (in) Points to a structure containing the
addresses of procedures that can be
called to perform I/O and other functions
on the channel.
const char *channelName (in) The name of this channel, such as file3;
must not be in use by any other channel.
Can be NULL, in which case the channel is
created without a name.
ClientData instanceData (in) Arbitrary one-word value to be associated
with this channel. This value is passed
to procedures in typePtr when they are
invoked.
int mask (in) OR-ed combination of TCL_READABLE and
TCL_WRITABLE to indicate whether a
channel is readable and writable.
Tcl_Channel channel (in) The channel to operate on.
int direction (in) TCL_READABLE means the input handle is
wanted; TCL_WRITABLE means the output
handle is wanted.
ClientData *handlePtr (out) Points to the location where the desired
OS-specific handle should be stored.
int size (in) The size, in bytes, of buffers to
allocate in this channel.
int mask (in) An OR-ed combination of TCL_READABLE,
TCL_WRITABLE and TCL_EXCEPTION that
indicates events that have occurred on
this channel.
Tcl_Interp *interp (in) Current interpreter. (can be NULL)
const char *optionName (in) Name of the invalid option.
const char *optionList (in) Specific options list (space separated
words, without “-”) to append to the
standard generic options list. Can be
NULL for generic options error message
only.
_________________________________________________________________________________________________
DESCRIPTION
Tcl uses a two-layered channel architecture. It provides a generic upper layer to enable C
and Tcl programs to perform input and output using the same APIs for a variety of files,
devices, sockets etc. The generic C APIs are described in the manual entry for
Tcl_OpenFileChannel.
The lower layer provides type-specific channel drivers for each type of device supported
on each platform. This manual entry describes the C APIs used to communicate between the
generic layer and the type-specific channel drivers. It also explains how new types of
channels can be added by providing new channel drivers.
Channel drivers consist of a number of components: First, each channel driver provides a
Tcl_ChannelType structure containing pointers to functions implementing the various
operations used by the generic layer to communicate with the channel driver. The
Tcl_ChannelType structure and the functions referenced by it are described in the section
TCL_CHANNELTYPE, below.
Second, channel drivers usually provide a Tcl command to create instances of that type of
channel. For example, the Tcl open command creates channels that use the file and command
channel drivers, and the Tcl socket command creates channels that use TCP sockets for
network communication.
Third, a channel driver optionally provides a C function to open channel instances of that
type. For example, Tcl_OpenFileChannel opens a channel that uses the file channel driver,
and Tcl_OpenTcpClient opens a channel that uses the TCP network protocol. These creation
functions typically use Tcl_CreateChannel internally to open the channel.
To add a new type of channel you must implement a C API or a Tcl command that opens a
channel by invoking Tcl_CreateChannel. When your driver calls Tcl_CreateChannel it passes
in a Tcl_ChannelType structure describing the driver's I/O procedures. The generic layer
will then invoke the functions referenced in that structure to perform operations on the
channel.
Tcl_CreateChannel opens a new channel and associates the supplied typePtr and instanceData
with it. The channel is opened in the mode indicated by mask. For a discussion of channel
drivers, their operations and the Tcl_ChannelType structure, see the section
TCL_CHANNELTYPE, below.
Tcl_CreateChannel interacts with the code managing the standard channels. Once a standard
channel was initialized either through a call to Tcl_GetStdChannel or a call to
Tcl_SetStdChannel closing this standard channel will cause the next call to
Tcl_CreateChannel to make the new channel the new standard channel too. See
Tcl_StandardChannels for a general treatise about standard channels and the behaviour of
the Tcl library with regard to them.
Tcl_GetChannelInstanceData returns the instance data associated with the channel in
channel. This is the same as the instanceData argument in the call to Tcl_CreateChannel
that created this channel.
Tcl_GetChannelType returns a pointer to the Tcl_ChannelType structure used by the channel
in the channel argument. This is the same as the typePtr argument in the call to
Tcl_CreateChannel that created this channel.
Tcl_GetChannelName returns a string containing the name associated with the channel, or
NULL if the channelName argument to Tcl_CreateChannel was NULL.
Tcl_GetChannelHandle places the OS-specific device handle associated with channel for the
given direction in the location specified by handlePtr and returns TCL_OK. If the channel
does not have a device handle for the specified direction, then TCL_ERROR is returned
instead. Different channel drivers will return different types of handle. Refer to the
manual entries for each driver to determine what type of handle is returned.
Tcl_GetChannelThread returns the id of the thread currently managing the specified
channel. This allows channel drivers to send their file events to the correct event queue
even for a multi-threaded core.
Tcl_GetChannelMode returns an OR-ed combination of TCL_READABLE and TCL_WRITABLE,
indicating whether the channel is open for input and output.
Tcl_GetChannelBufferSize returns the size, in bytes, of buffers allocated to store input
or output in channel. If the value was not set by a previous call to
Tcl_SetChannelBufferSize, described below, then the default value of 4096 is returned.
Tcl_SetChannelBufferSize sets the size, in bytes, of buffers that will be allocated in
subsequent operations on the channel to store input or output. The size argument should be
between ten and one million, allowing buffers of ten bytes to one million bytes. If size
is outside this range, Tcl_SetChannelBufferSize sets the buffer size to 4096.
Tcl_NotifyChannel is called by a channel driver to indicate to the generic layer that the
events specified by mask have occurred on the channel. Channel drivers are responsible
for invoking this function whenever the channel handlers need to be called for the
channel. See WATCHPROC below for more details.
Tcl_BadChannelOption is called from driver specific setOptionProc or getOptionProc to
generate a complete error message.
Tcl_ChannelBuffered returns the number of bytes of input currently buffered in the
internal buffer (push back area) of the channel itself. It does not report about the data
in the overall buffers for the stack of channels the supplied channel is part of.
Tcl_IsChannelShared checks the refcount of the specified channel and returns whether the
channel was shared among multiple interpreters (result == 1) or not (result == 0).
Tcl_IsChannelRegistered checks whether the specified channel is registered in the given
interpreter (result == 1) or not (result == 0).
Tcl_IsChannelExisting checks whether a channel with the specified name is registered in
the (thread)-global list of all channels (result == 1) or not (result == 0).
Tcl_CutChannel removes the specified channel from the (thread)global list of all channels
(of the current thread). Application to a channel still registered in some interpreter is
not allowed. Also notifies the driver if the Tcl_ChannelType version is │
TCL_CHANNEL_VERSION_4 (or higher), and Tcl_DriverThreadActionProc is defined for it.
Tcl_SpliceChannel adds the specified channel to the (thread)global list of all channels
(of the current thread). Application to a channel registered in some interpreter is not
allowed. Also notifies the driver if the Tcl_ChannelType version is TCL_CHANNEL_VERSION_4 │
(or higher), and Tcl_DriverThreadActionProc is defined for it.
Tcl_ClearChannelHandlers removes all channel handlers and event scripts associated with
the specified channel, thus shutting down all event processing for this channel.
TCL_CHANNELTYPE
A channel driver provides a Tcl_ChannelType structure that contains pointers to functions
that implement the various operations on a channel; these operations are invoked as needed
by the generic layer. The structure was versioned starting in Tcl 8.3.2/8.4 to correct a
problem with stacked channel drivers. See the OLD CHANNEL TYPES section below for details
about the old structure.
The Tcl_ChannelType structure contains the following fields:
typedef struct Tcl_ChannelType {
char *typeName;
Tcl_ChannelTypeVersion version;
Tcl_DriverCloseProc *closeProc;
Tcl_DriverInputProc *inputProc;
Tcl_DriverOutputProc *outputProc;
Tcl_DriverSeekProc *seekProc;
Tcl_DriverSetOptionProc *setOptionProc;
Tcl_DriverGetOptionProc *getOptionProc;
Tcl_DriverWatchProc *watchProc;
Tcl_DriverGetHandleProc *getHandleProc;
Tcl_DriverClose2Proc *close2Proc;
Tcl_DriverBlockModeProc *blockModeProc;
Tcl_DriverFlushProc *flushProc;
Tcl_DriverHandlerProc *handlerProc;
Tcl_DriverWideSeekProc *wideSeekProc;
Tcl_DriverThreadActionProc *threadActionProc;
Tcl_DriverTruncateProc *truncateProc; │
} Tcl_ChannelType;
It is not necessary to provide implementations for all channel operations. Those which
are not necessary may be set to NULL in the struct: blockModeProc, seekProc,
setOptionProc, getOptionProc, getHandleProc, and close2Proc, in addition to flushProc,
handlerProc, threadActionProc, and truncateProc. Other functions that cannot be
implemented in a meaningful way should return EINVAL when called, to indicate that the
operations they represent are not available. Also note that wideSeekProc can be NULL if
seekProc is.
The user should only use the above structure for Tcl_ChannelType instantiation. When
referencing fields in a Tcl_ChannelType structure, the following functions should be used
to obtain the values: Tcl_ChannelName, Tcl_ChannelVersion, Tcl_ChannelBlockModeProc,
Tcl_ChannelCloseProc, Tcl_ChannelClose2Proc, Tcl_ChannelInputProc, Tcl_ChannelOutputProc,
Tcl_ChannelSeekProc, Tcl_ChannelWideSeekProc, Tcl_ChannelThreadActionProc, │
Tcl_ChannelTruncateProc, Tcl_ChannelSetOptionProc, Tcl_ChannelGetOptionProc,
Tcl_ChannelWatchProc, Tcl_ChannelGetHandleProc, Tcl_ChannelFlushProc, or
Tcl_ChannelHandlerProc.
The change to the structures was made in such a way that standard channel types are binary
compatible. However, channel types that use stacked channels (i.e. TLS, Trf) have new
versions to correspond to the above change since the previous code for stacked channels
had problems.
TYPENAME
The typeName field contains a null-terminated string that identifies the type of the
device implemented by this driver, e.g. file or socket.
This value can be retrieved with Tcl_ChannelName, which returns a pointer to the string.
VERSION
The version field should be set to the version of the structure that you require.
TCL_CHANNEL_VERSION_2 is the minimum recommended. TCL_CHANNEL_VERSION_3 must be set to
specify the wideSeekProc member. TCL_CHANNEL_VERSION_4 must be set to specify the
threadActionProc member (includes wideSeekProc). TCL_CHANNEL_VERSION_5 must be set to │
specify the truncateProc members (includes wideSeekProc and threadActionProc). If it is
not set to any of these, then this Tcl_ChannelType is assumed to have the original
structure. See OLD CHANNEL TYPES for more details. While Tcl will recognize and function
with either structures, stacked channels must be of at least TCL_CHANNEL_VERSION_2 to
function correctly.
This value can be retrieved with Tcl_ChannelVersion, which returns one of │
TCL_CHANNEL_VERSION_5, TCL_CHANNEL_VERSION_4, TCL_CHANNEL_VERSION_3, TCL_CHANNEL_VERSION_2
or TCL_CHANNEL_VERSION_1.
BLOCKMODEPROC
The blockModeProc field contains the address of a function called by the generic layer to
set blocking and nonblocking mode on the device. BlockModeProc should match the following
prototype:
typedef int Tcl_DriverBlockModeProc(
ClientData instanceData,
int mode);
The instanceData is the same as the value passed to Tcl_CreateChannel when this channel
was created. The mode argument is either TCL_MODE_BLOCKING or TCL_MODE_NONBLOCKING to set
the device into blocking or nonblocking mode. The function should return zero if the
operation was successful, or a nonzero POSIX error code if the operation failed.
If the operation is successful, the function can modify the supplied instanceData to
record that the channel entered blocking or nonblocking mode and to implement the blocking
or nonblocking behavior. For some device types, the blocking and nonblocking behavior can
be implemented by the underlying operating system; for other device types, the behavior
must be emulated in the channel driver.
This value can be retrieved with Tcl_ChannelBlockModeProc, which returns a pointer to the
function.
A channel driver not supplying a blockModeProc has to be very, very careful. It has to
tell the generic layer exactly which blocking mode is acceptable to it, and should this
also document for the user so that the blocking mode of the channel is not changed to an
unacceptable value. Any confusion here may lead the interpreter into a (spurious and
difficult to find) deadlock.
CLOSEPROC AND CLOSE2PROC
The closeProc field contains the address of a function called by the generic layer to
clean up driver-related information when the channel is closed. CloseProc must match the
following prototype:
typedef int Tcl_DriverCloseProc(
ClientData instanceData,
Tcl_Interp *interp);
The instanceData argument is the same as the value provided to Tcl_CreateChannel when the
channel was created. The function should release any storage maintained by the channel
driver for this channel, and close the input and output devices encapsulated by this
channel. All queued output will have been flushed to the device before this function is
called, and no further driver operations will be invoked on this instance after calling
the closeProc. If the close operation is successful, the procedure should return zero;
otherwise it should return a nonzero POSIX error code. In addition, if an error occurs and
interp is not NULL, the procedure should store an error message in the interpreter's
result.
Alternatively, channels that support closing the read and write sides independently may
set closeProc to TCL_CLOSE2PROC and set close2Proc to the address of a function that
matches the following prototype:
typedef int Tcl_DriverClose2Proc(
ClientData instanceData,
Tcl_Interp *interp,
int flags);
The close2Proc will be called with flags set to an OR'ed combination of TCL_CLOSE_READ or
TCL_CLOSE_WRITE to indicate that the driver should close the read and/or write side of the
channel. The channel driver may be invoked to perform additional operations on the
channel after close2Proc is called to close one or both sides of the channel. If flags is
0 (zero), the driver should close the channel in the manner described above for closeProc.
No further operations will be invoked on this instance after close2Proc is called with all
flags cleared. In all cases, the close2Proc function should return zero if the close
operation was successful; otherwise it should return a nonzero POSIX error code. In
addition, if an error occurs and interp is not NULL, the procedure should store an error
message in the interpreter's result.
The closeProc and close2Proc values can be retrieved with Tcl_ChannelCloseProc or
Tcl_ChannelClose2Proc, which return a pointer to the respective function.
INPUTPROC
The inputProc field contains the address of a function called by the generic layer to read
data from the file or device and store it in an internal buffer. InputProc must match the
following prototype:
typedef int Tcl_DriverInputProc(
ClientData instanceData,
char *buf,
int bufSize,
int *errorCodePtr);
InstanceData is the same as the value passed to Tcl_CreateChannel when the channel was
created. The buf argument points to an array of bytes in which to store input from the
device, and the bufSize argument indicates how many bytes are available at buf.
The errorCodePtr argument points to an integer variable provided by the generic layer. If
an error occurs, the function should set the variable to a POSIX error code that
identifies the error that occurred.
The function should read data from the input device encapsulated by the channel and store
it at buf. On success, the function should return a nonnegative integer indicating how
many bytes were read from the input device and stored at buf. On error, the function
should return -1. If an error occurs after some data has been read from the device, that
data is lost.
If inputProc can determine that the input device has some data available but less than
requested by the bufSize argument, the function should only attempt to read as much data
as is available and return without blocking. If the input device has no data available
whatsoever and the channel is in nonblocking mode, the function should return an EAGAIN
error. If the input device has no data available whatsoever and the channel is in blocking
mode, the function should block for the shortest possible time until at least one byte of
data can be read from the device; then, it should return as much data as it can read
without blocking.
This value can be retrieved with Tcl_ChannelInputProc, which returns a pointer to the
function.
OUTPUTPROC
The outputProc field contains the address of a function called by the generic layer to
transfer data from an internal buffer to the output device. OutputProc must match the
following prototype:
typedef int Tcl_DriverOutputProc(
ClientData instanceData,
const char *buf,
int toWrite,
int *errorCodePtr);
InstanceData is the same as the value passed to Tcl_CreateChannel when the channel was
created. The buf argument contains an array of bytes to be written to the device, and the
toWrite argument indicates how many bytes are to be written from the buf argument.
The errorCodePtr argument points to an integer variable provided by the generic layer. If
an error occurs, the function should set this variable to a POSIX error code that
identifies the error.
The function should write the data at buf to the output device encapsulated by the
channel. On success, the function should return a nonnegative integer indicating how many
bytes were written to the output device. The return value is normally the same as
toWrite, but may be less in some cases such as if the output operation is interrupted by a
signal. If an error occurs the function should return -1. In case of error, some data may
have been written to the device.
If the channel is nonblocking and the output device is unable to absorb any data
whatsoever, the function should return -1 with an EAGAIN error without writing any data.
This value can be retrieved with Tcl_ChannelOutputProc, which returns a pointer to the
function.
SEEKPROC AND WIDESEEKPROC
The seekProc field contains the address of a function called by the generic layer to move
the access point at which subsequent input or output operations will be applied. SeekProc
must match the following prototype:
typedef int Tcl_DriverSeekProc(
ClientData instanceData,
long offset,
int seekMode,
int *errorCodePtr);
The instanceData argument is the same as the value given to Tcl_CreateChannel when this
channel was created. Offset and seekMode have the same meaning as for the Tcl_Seek
procedure (described in the manual entry for Tcl_OpenFileChannel).
The errorCodePtr argument points to an integer variable provided by the generic layer for
returning errno values from the function. The function should set this variable to a
POSIX error code if an error occurs. The function should store an EINVAL error code if
the channel type does not implement seeking.
The return value is the new access point or -1 in case of error. If an error occurred, the
function should not move the access point.
If there is a non-NULL seekProc field, the wideSeekProc field may contain the address of
an alternative function to use which handles wide (i.e. larger than 32-bit) offsets, so
allowing seeks within files larger than 2GB. The wideSeekProc will be called in
preference to the seekProc, but both must be defined if the wideSeekProc is defined.
WideSeekProc must match the following prototype:
typedef Tcl_WideInt Tcl_DriverWideSeekProc(
ClientData instanceData,
Tcl_WideInt offset,
int seekMode,
int *errorCodePtr);
The arguments and return values mean the same thing as with seekProc above, except that
the type of offsets and the return type are different.
The seekProc value can be retrieved with Tcl_ChannelSeekProc, which returns a pointer to
the function, and similarly the wideSeekProc can be retrieved with
Tcl_ChannelWideSeekProc.
SETOPTIONPROC
The setOptionProc field contains the address of a function called by the generic layer to
set a channel type specific option on a channel. setOptionProc must match the following
prototype:
typedef int Tcl_DriverSetOptionProc(
ClientData instanceData,
Tcl_Interp *interp,
const char *optionName,
const char *newValue);
optionName is the name of an option to set, and newValue is the new value for that option,
as a string. The instanceData is the same as the value given to Tcl_CreateChannel when
this channel was created. The function should do whatever channel type specific action is
required to implement the new value of the option.
Some options are handled by the generic code and this function is never called to set
them, e.g. -blockmode. Other options are specific to each channel type and the
setOptionProc procedure of the channel driver will get called to implement them. The
setOptionProc field can be NULL, which indicates that this channel type supports no type
specific options.
If the option value is successfully modified to the new value, the function returns
TCL_OK. It should call Tcl_BadChannelOption which itself returns TCL_ERROR if the
optionName is unrecognized. If newValue specifies a value for the option that is not
supported or if a system call error occurs, the function should leave an error message in
the result field of interp if interp is not NULL. The function should also call
Tcl_SetErrno to store an appropriate POSIX error code.
This value can be retrieved with Tcl_ChannelSetOptionProc, which returns a pointer to the
function.
GETOPTIONPROC
The getOptionProc field contains the address of a function called by the generic layer to
get the value of a channel type specific option on a channel. getOptionProc must match the
following prototype:
typedef int Tcl_DriverGetOptionProc(
ClientData instanceData,
Tcl_Interp *interp,
const char *optionName,
Tcl_DString *optionValue);
OptionName is the name of an option supported by this type of channel. If the option name
is not NULL, the function stores its current value, as a string, in the Tcl dynamic string
optionValue. If optionName is NULL, the function stores in optionValue an alternating
list of all supported options and their current values. On success, the function returns
TCL_OK. It should call Tcl_BadChannelOption which itself returns TCL_ERROR if the
optionName is unrecognized. If a system call error occurs, the function should leave an
error message in the result of interp if interp is not NULL. The function should also call
Tcl_SetErrno to store an appropriate POSIX error code.
Some options are handled by the generic code and this function is never called to retrieve
their value, e.g. -blockmode. Other options are specific to each channel type and the
getOptionProc procedure of the channel driver will get called to implement them. The
getOptionProc field can be NULL, which indicates that this channel type supports no type
specific options.
This value can be retrieved with Tcl_ChannelGetOptionProc, which returns a pointer to the
function.
WATCHPROC
The watchProc field contains the address of a function called by the generic layer to
initialize the event notification mechanism to notice events of interest on this channel.
WatchProc should match the following prototype:
typedef void Tcl_DriverWatchProc(
ClientData instanceData,
int mask);
The instanceData is the same as the value passed to Tcl_CreateChannel when this channel
was created. The mask argument is an OR-ed combination of TCL_READABLE, TCL_WRITABLE and
TCL_EXCEPTION; it indicates events the caller is interested in noticing on this channel.
The function should initialize device type specific mechanisms to notice when an event of
interest is present on the channel. When one or more of the designated events occurs on
the channel, the channel driver is responsible for calling Tcl_NotifyChannel to inform the
generic channel module. The driver should take care not to starve other channel drivers
or sources of callbacks by invoking Tcl_NotifyChannel too frequently. Fairness can be
insured by using the Tcl event queue to allow the channel event to be scheduled in
sequence with other events. See the description of Tcl_QueueEvent for details on how to
queue an event.
This value can be retrieved with Tcl_ChannelWatchProc, which returns a pointer to the
function.
GETHANDLEPROC
The getHandleProc field contains the address of a function called by the generic layer to
retrieve a device-specific handle from the channel. GetHandleProc should match the
following prototype:
typedef int Tcl_DriverGetHandleProc(
ClientData instanceData,
int direction,
ClientData *handlePtr);
InstanceData is the same as the value passed to Tcl_CreateChannel when this channel was
created. The direction argument is either TCL_READABLE to retrieve the handle used for
input, or TCL_WRITABLE to retrieve the handle used for output.
If the channel implementation has device-specific handles, the function should retrieve
the appropriate handle associated with the channel, according the direction argument. The
handle should be stored in the location referred to by handlePtr, and TCL_OK should be
returned. If the channel is not open for the specified direction, or if the channel
implementation does not use device handles, the function should return TCL_ERROR.
This value can be retrieved with Tcl_ChannelGetHandleProc, which returns a pointer to the
function.
FLUSHPROC
The flushProc field is currently reserved for future use. It should be set to NULL.
FlushProc should match the following prototype:
typedef int Tcl_DriverFlushProc(
ClientData instanceData);
This value can be retrieved with Tcl_ChannelFlushProc, which returns a pointer to the
function.
HANDLERPROC
The handlerProc field contains the address of a function called by the generic layer to
notify the channel that an event occurred. It should be defined for stacked channel
drivers that wish to be notified of events that occur on the underlying (stacked) channel.
HandlerProc should match the following prototype:
typedef int Tcl_DriverHandlerProc(
ClientData instanceData,
int interestMask);
InstanceData is the same as the value passed to Tcl_CreateChannel when this channel was
created. The interestMask is an OR-ed combination of TCL_READABLE or TCL_WRITABLE; it
indicates what type of event occurred on this channel.
This value can be retrieved with Tcl_ChannelHandlerProc, which returns a pointer to the
function.
THREADACTIONPROC
The threadActionProc field contains the address of the function called by the generic
layer when a channel is created, closed, or going to move to a different thread, i.e.
whenever thread-specific driver state might have to initialized or updated. It can be
NULL. The action TCL_CHANNEL_THREAD_REMOVE is used to notify the driver that it should
update or remove any thread-specific data it might be maintaining for the channel.
The action TCL_CHANNEL_THREAD_INSERT is used to notify the driver that it should update or
initialize any thread-specific data it might be maintaining using the calling thread as
the associate. See Tcl_CutChannel and Tcl_SpliceChannel for more detail.
typedef void Tcl_DriverThreadActionProc(
ClientData instanceData,
int action);
InstanceData is the same as the value passed to Tcl_CreateChannel when this channel was
created.
These values can be retrieved with Tcl_ChannelThreadActionProc, which returns a pointer to
the function.
TRUNCATEPROC
The truncateProc field contains the address of the function called by the generic layer
when a channel is truncated to some length. It can be NULL.
typedef int Tcl_DriverTruncateProc(
ClientData instanceData,
Tcl_WideInt length);
InstanceData is the same as the value passed to Tcl_CreateChannel when this channel was
created, and length is the new length of the underlying file, which should not be
negative. The result should be 0 on success or an errno code (suitable for use with
Tcl_SetErrno) on failure.
These values can be retrieved with Tcl_ChannelTruncateProc, which returns a pointer to the
function.
TCL_BADCHANNELOPTION
This procedure generates a “bad option” error message in an (optional) interpreter. It is
used by channel drivers when an invalid Set/Get option is requested. Its purpose is to
concatenate the generic options list to the specific ones and factorize the generic
options error message string.
It always returns TCL_ERROR
An error message is generated in interp's result object to indicate that a command was
invoked with a bad option. The message has the form
bad option "blah": should be one of
<...generic options...>+<...specific options...>
so you get for instance:
bad option "-blah": should be one of -blocking,
-buffering, -buffersize, -eofchar, -translation,
-peername, or -sockname
when called with optionList equal to “peername sockname”
“blah” is the optionName argument and “<specific options>” is a space separated list of
specific option words. The function takes good care of inserting minus signs before each
option, commas after, and an “or” before the last option.
OLD CHANNEL TYPES
The original (8.3.1 and below) Tcl_ChannelType structure contains the following fields:
typedef struct Tcl_ChannelType {
char *typeName;
Tcl_DriverBlockModeProc *blockModeProc;
Tcl_DriverCloseProc *closeProc;
Tcl_DriverInputProc *inputProc;
Tcl_DriverOutputProc *outputProc;
Tcl_DriverSeekProc *seekProc;
Tcl_DriverSetOptionProc *setOptionProc;
Tcl_DriverGetOptionProc *getOptionProc;
Tcl_DriverWatchProc *watchProc;
Tcl_DriverGetHandleProc *getHandleProc;
Tcl_DriverClose2Proc *close2Proc;
} Tcl_ChannelType;
It is still possible to create channel with the above structure. The internal channel
code will determine the version. It is imperative to use the new Tcl_ChannelType
structure if you are creating a stacked channel driver, due to problems with the earlier
stacked channel implementation (in 8.2.0 to 8.3.1).
Prior to 8.4.0 (i.e. during the later releases of 8.3 and early part of the 8.4
development cycle) the Tcl_ChannelType structure contained the following fields:
typedef struct Tcl_ChannelType {
char *typeName;
Tcl_ChannelTypeVersion version;
Tcl_DriverCloseProc *closeProc;
Tcl_DriverInputProc *inputProc;
Tcl_DriverOutputProc *outputProc;
Tcl_DriverSeekProc *seekProc;
Tcl_DriverSetOptionProc *setOptionProc;
Tcl_DriverGetOptionProc *getOptionProc;
Tcl_DriverWatchProc *watchProc;
Tcl_DriverGetHandleProc *getHandleProc;
Tcl_DriverClose2Proc *close2Proc;
Tcl_DriverBlockModeProc *blockModeProc;
Tcl_DriverFlushProc *flushProc;
Tcl_DriverHandlerProc *handlerProc;
Tcl_DriverTruncateProc *truncateProc;
} Tcl_ChannelType;
When the above structure is registered as a channel type, the version field should always
be TCL_CHANNEL_VERSION_2.
SEE ALSO
Tcl_Close(3tcl), Tcl_OpenFileChannel(3tcl), Tcl_SetErrno(3tcl), Tcl_QueueEvent(3tcl),
Tcl_StackChannel(3tcl), Tcl_GetStdChannel(3tcl)
KEYWORDS
blocking, channel driver, channel registration, channel type, nonblocking