Provided by: libtest2-suite-perl_0.000102-1_all 
NAME
Test2::Manual::Testing::Introduction - Introduction to testing with Test2.
DESCRIPTION
This tutorial is a beginners introduction to testing. This will take you through writing a test file,
making assertions, and running your test.
BOILERPLATE
THE TEST FILE
Test files typically are placed inside the "t/" directory, and end with the ".t" file extension.
"t/example.t":
use Test2::V0;
# Assertions will go here
done_testing;
This is all the boilerplate you need.
use Test2::V0;
This loads a collection of testing tools that will be described later in the tutorial. This will also
turn on "strict" and "warnings" for you.
done_testing;
This should always be at the end of your test files. This tells Test2 that you are done making
assertions. This is important as "test2" will assume the test did not complete successfully without
this, or some other form of test "plan".
DIST CONFIG
You should always list bundles and tools directly. You should not simply list Test2::Suite and call it
done, bundles and tools may be moved out of Test2::Suite to their own dists at any time.
Dist::Zilla
[Prereqs / TestRequires]
Test2::V0 = 0.000060
ExtUtils::MakeMaker
my %WriteMakefileArgs = (
...,
"TEST_REQUIRES" => {
"Test2::V0" => "0.000060"
},
...
);
Module::Install
test_requires 'Test2::V0' => '0.000060';
Module::Build
my $build = Module::Build->new(
...,
test_requires => {
"Test2::V0" => "0.000060",
},
...
);
MAKING ASSERTIONS
The most simple tool for making assertions is "ok()". "ok()" lets you assert that a condition is true.
ok($CONDITION, "Description of the condition");
Here is a complete "t/example.t":
use Test2::V0;
ok(1, "1 is true, so this will pass");
done_testing;
RUNNING THE TEST
Test files are simply scripts. Just like any other script you can run the test directly with perl.
Another option is to use a test "harness" which runs the test for you, and provides extra information and
checks the scripts exit value for you.
RUN DIRECTLY
$ perl -Ilib t/example.t
Which should produce output like this:
# Seeded srand with seed '20161028' from local date.
ok 1 - 1 is true, so this will pass
1..1
If the test had failed ("ok(0, ...)") it would look like this:
# Seeded srand with seed '20161028' from local date.
not ok 1 - 0 is false, so this will fail
1..1
Test2 will also set the exit value of the script, a successful run will have an exit value of 0, a failed
run will have a non-zero exit value.
USING YATH
The "yath" command line tool is provided by Test2::Harness which you may need to install yourself from
cpan. "yath" is the harness written specifically for Test2.
$ yath -Ilib t/example.t
This will produce output similar to this:
( PASSED ) job 1 t/example.t
================================================================================
Run ID: 1508027909
All tests were successful!
You can also request verbose output with the "-v" flag:
$ yath -Ilib -v t/example.t
Which produces:
( LAUNCH ) job 1 example.t
( NOTE ) job 1 Seeded srand with seed '20171014' from local date.
[ PASS ] job 1 + 1 is true, so this will pass
[ PLAN ] job 1 Expected asserions: 1
( PASSED ) job 1 example.t
================================================================================
Run ID: 1508028002
All tests were successful!
USING PROVE
The "prove" command line tool is provided by the Test::Harness module which comes with most versions of
perl. Test::Harness is dual-life, which means you can also install the latest version from cpan.
$ prove -Ilib t/example.t
This will produce output like this:
example.t .. ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.01 usr 0.00 sys + 0.05 cusr 0.00 csys = 0.06 CPU)
Result: PASS
You can also request verbose output with the "-v" flag:
$ prove -Ilib -v t/example.t
The verbose output looks like this:
example.t ..
# Seeded srand with seed '20161028' from local date.
ok 1 - 1 is true, so this will pass
1..1
ok
All tests successful.
Files=1, Tests=1, 0 wallclock secs ( 0.02 usr 0.00 sys + 0.06 cusr 0.00 csys = 0.08 CPU)
Result: PASS
THE "PLAN"
All tests need a "plan". The job of a plan is to make sure you ran all the tests you expected. The plan
prevents a passing result from a test that exits before all the tests are run.
There are 2 primary ways to set the plan:
done_testing()
The most common, and recommended way to set a plan is to add "done_testing" at the end of your test
file. This will automatically calculate the plan for you at the end of the test. If the test were to
exit early then "done_testing" would not run and no plan would be found, forcing a failure.
plan($COUNT)
The "plan()" function allows you to specify an exact number of assertions you want to run. If you run
too many or too few assertions then the plan will not match and it will be counted as a failure. The
primary problem with this way of planning is that you need to add up the number of assertions, and
adjust the count whenever you update the test file.
"plan()" must be used before all assertions, or after all assertions, it cannot be done in the middle
of making assertions.
ADDITIONAL ASSERTION TOOLS
The Test2::V0 bundle provides a lot more than "ok()", "plan()", and "done_testing()". The biggest tools
to note are:
is($a, $b, $description)
"is()" allows you to compare 2 structures and insure they are identical. You can use it for simple
string comparisons, or even deep data structure comparisons.
is("foo", "foo", "Both strings are identical");
is(["foo", 1], ["foo", 1], "Both arrays contain the same elements");
like($a, $b, $description)
"like()" is similar to "is()" except that it only checks items listed on the right, it ignores any
extra values found on the left.
like([1, 2, 3, 4], [1, 2, 3], "Passes, the extra element on the left is ignored");
You can also used regular expressions on the right hand side:
like("foo bar baz", qr/bar/, "The string matches the regex, this passes");
You can also nest the regexes:
like([1, 2, 'foo bar baz', 3], [1, 2, qr/bar/], "This passes");
SEE ALSO
Test2::Manual - Primary index of the manual.
SOURCE
The source code repository for Test2-Manual can be found at https://github.com/Test-More/Test2-Suite/.
MAINTAINERS
Chad Granum <exodist@cpan.org>
AUTHORS
Chad Granum <exodist@cpan.org>
COPYRIGHT
Copyright 2017 Chad Granum <exodist@cpan.org>.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl
itself.
See http://dev.perl.org/licenses/