Provided by: libtest-inter-perl_1.06-1_all bug

NAME

       Test::Inter - framework for more readable interactive test scripts

DESCRIPTION

       This is another framework for writing test scripts. Some of the syntax is loosely inspired by Test::More,
       and has most of it's functionality, but it is not a drop-in replacement.

       Test::More (and other existing test frameworks) suffer from two weaknesses, both of which have prevented
       me from ever using them:

          None offer the ability to access specific tests in
          a reasonably interactive fashion

          None offer the ability to write the tests in
          whatever format would make the tests the most
          readable

       The way I write and use test scripts, existing Test::* modules are not nearly as useful as they could be.
       Test scripts written using Test::More work fine when running as part of the test suite, but debugging an
       individual test requires extra steps, and the tests themselves are not as readable as they should be.

       I do most of my debugging using test scripts. When I find a bug, I write a test case for it, debug it
       using the test script, and then leave the test there so the bug won't come back (hopefully).

       Since I use test scripts in two ways (part of a standard test suite and to run the scripts in some
       interactive way to debug problems), I want to be able to do the following trivially:

       Easy access to a specific test or tests
           If I'm running the test script interactively (perhaps in the debugger), there are several common
           functions that I want to have available, including:

              Run only a single test, or a subset of tests

              Set a breakpoint in the debugger to run
              up to the start of the Nth test

       Better diagnostics
           When running a test script as part of a test suite, the pass/fail status is really the only thing of
           interest. You just want to know if the module passes all the tests.

           When running interactively, additional information may allow me to quickly track down the problem
           without even resorting to a debugger.

           If a test fails, I almost always want to see why it failed if I'm running it interactively.  If
           reasonable, I want to see a list of what was input, what was output, and what was expected.

       The other feature that I wanted in a test suite is the ability to define the tests in a format that is
       natural and readable FOR THE TESTS.  In almost every case, it is best to think of a test script as
       consisting of two separate parts: a script part, and a test part.

       The script part of a test script is the least important part! It's usually fairly trivial, rarely needs
       to be changed, and is not the focus of the test script.

       The tests part of the script IS the important part, and these should be expressed in a form that is
       natural to them, easy to maintain, easy to read, and easy to modify, and none of these should involve
       modifying the script portion of the test script in general. Because the content of the tests is the
       important part of the script, the emphasis should be in making them more readable, even at the expense of
       the script portion.  As a general rule, if the script portion of the test script obscures the tests in
       any way, it's not written correctly!

       The solution to this is well understood, and is common to many other systems where you are mixing two
       "languages".  The task of correctly specifying both the tests and the test script is virtually identical
       to the task of creating a PHP script which consists of a mixture of PHP and HTML, or the task of creating
       a template file using some templating system where the file consists of a mixture of text to be displayed
       and templating commands.  It is well understood in each of these cases that the more the two "languages"
       are interwoven, the less readable both are, and the harder it is to maintain.  The more you are able to
       separate the two, the easier both are to read and maintain.

       As often as possible, I want the tests to be written in some sort of text format which can be easily read
       as a table with no perl commands interspersed. I want to the freedom to define the tests in one section
       (a long string, the DATA section, or even in a separate file) which is easily readable. This may
       introduce the necessity of parsing it, but it makes it significantly easier to maintain the tests.

       This flexibility makes it much easier to read the tests (as opposed to the script) which is the
       fundamental content of a test script.

       To illustrate some of this, in Test::More, a series of tests might be specified as:

          # test 1
          $result = func("apples","bushels");
          is($result, "enough");

          # test 2
          $result = func("grapefruit","tons");
          is($result, "enough");

          # test 3
          $result = func("oranges","boatloads");
          is($result, "insufficient");

       Thinking about the features I want that I listed above, there are several difficulties with this.

       Debugging the script is tedious
           Say you ran the test suite, and test 3 failed.  To debug it using a traditional Test::* module, you
           have to open up the test script, find the 3rd test (which won't necessarily be trivial, especially if
           you're talking about the 103rd test), and then run the debugger setting a break point at that line
           number.

           This sequence of steps is typically not very hard (especially when the test script is as simple as
           the example above), but it's still lots of steps that serve only to break your train of thought.

           How much better to be able to set a break point in the function that actually performs the test for
           the Nth test.

           It would also be nice to be able to skip the first two tests... perhaps they take a long time to run,
           and I want to get right to work on test 3.  You can do this easily too by setting the $::TI_START
           variable.

       Way too much perl interspersed with the tests
           It's difficult to read the tests individually in this script because there is too much perl code
           among them, and virtually impossible to look at them as a whole.

           It is true that looking at this particular example, it is very simple... but the script ISN'T the
           content you're interested in (and bear in mind that many test scripts are nowhere near this simple).
           The REAL content of this script are the tests, which consist of the function arguments and the
           expected result. Although it's not impossible to see each of these in the script above, it's not in a
           format that is conducive to studying the tests, and especially not for examining the list of tests as
           a whole.

       Now, look at an alternate way of specifying the tests using this module:

          $tests = "

            apples     bushels   => enough

            grapefruit tons      => enough

            oranges    boatloads => insufficient

          ";

          $o->tests(tests => $tests,
                    func  => \&func);

       Here, it's easy to see the list of tests, and adding additional tests is a breeze.

       This module supports a number of methods for defining tests, so you can use whichever one is most
       convenient (including methods that are identical to Test::More if that really is the best method).

       In addition, the following debugger command works as desired:

          b func ($::TI_NUM==3)

       and you're ready to debug (assuming that the test function is named 'func').

CREATING A TEST

       Every test may have several pieces of information:

       A name
           Every test is automatically assigned a number, but it may be useful to specify a name of a test
           (which is actually a short description of the test). Whenever a test result is reported, the name
           will be given (if one was specified).

           The name may not have a '#' in it.

           The name is completely optional, but makes the results more readable.

       An expected result
           In order to test something, you need to know what result was expected (or in some cases, what result
           was NOT expected).

       A function and arguments OR a result
           You also need to know the results that you're comparing to the expected results.

           This can be obtained by simply working with a set of results, or a function name and a set of
           arguments to pass to it.

       Conditions
           It is useful to be able to specify state information at the start of the test suite (for example, to
           see if certain features are available), and some tests may only run if those conditions are met.

           If no conditions are set for a test, it will always run.

       Todo tests
           Some tests may be marked as 'todo' tests. These are test which are allowed to fail (meaning that they
           have been put in place for an as-yet unimplemented feature). Since it is expected that the test will
           fail, the test suite will still pass, even if these tests fail.

           The tests will still run and if they pass, a message is issued saying that the feature is now
           implemented, and the tests should be graduated to non-todo state.

BASE METHODS

       new
              $o = new Test::Inter [$name] [%options];

           This creates a new test framework. There are several options which may be used to specify which tests
           are run, how they are run, and what output is given.

           The entire test script can be named by passing in $name. Options can be passed in as a hash of
           ($opt,$val) pairs.

           Options can be set in four different ways. First, you can pass in an ($opt,$val) pair in the new
           method. Second, you can set an environment variable (which overrides any value passed to the new
           method). Third, you can set a global variable (which overrides both the environment variable and
           options passed to the new method).  Forth, you can call the appropriate method to set the option.
           This overrides all other methods.

           Each of the allowed options are described below in the following base methods:

              start
              end
              testnum
              plan
              abort
              quiet
              mode
              skip_all
              width

       version
              $o->version();

           Returns the version of the module.

       start
              $o = new Test::Inter 'start' => $N;
              $o->start($N)

           To define which test you want to start with, pass in an ($opt,$val) pair of ('start',N), set an
           environment variable TI_START=N, or a global variable $::TI_START=N.

           When the start test is defined, most tests numbered less than N are completely ignored. If the tests
           are being run quietly (see the quiet method below), nothing is printed out for these tests.
           Otherwise, a skip message is printed out.

           One class of tests IS still executed. Tests run using the require_ok or use_ok methods (to test the
           loading of modules) are still run.

           If no value (or a value of 0) is used, it defaults to the first test.

       end
              $o = new Test::Inter 'end' => $M;
              $o->end($M);

           To define which test you want to end with, pass in an ($opt,$val) pair of ('end',M), set an
           environment variable TI_END=M, or set a global variable $::TI_END=M.

           When the end test is defined, all tests numbered more than M are completely ignored. If the tests are
           being run quietly (see the quiet method below), nothing is printed out for these tests. Otherwise, a
           skip message is printed out.

           If no value is given, it defaults to 0 (which means that all remaining tests are run).

       testnum
              $o = new Test::Inter 'testnum' => $N;
              $o->testnum($N);

           This is used to run only a single test. It is equivalent to setting both the start and end tests to
           $N.

       plan
       done_testing
              $o = new Test::Inter 'plan' => $N;
              $o->plan($n);

              $o->done_testing();
              $o->done_testing($n);

           The TAP API (the 'language' used to run a sequence of tests and see which ones failed and which ones
           passed) requires a statement of the number of tests that are expected to run.

           This statement can appear at the start of the test suite, or at the end.

           If you know in advance how many tests should run in the test script, you can pass in a non-zero
           integer in a ('plan',N) pair to the new method, or set the TI_PLAN environment variable or the
           $::TI_PLAN global variable, or call the plan method.

           If you know how many tests should run at the end of the test script, you can pass in a non-zero
           integer to the done_testing method.

           Frequently, you don't really care how many tests are in the script (especially if new tests are added
           on a regular basis). In this case, you still need to include a statement that says that the number of
           tests expected is however many were run. To do this, call the done_testing method with no argument.

           NOTE: if the plan method is used, it MUST be used before any tests are run (including those that test
           the loading of modules). If the done_testing method is used, it MUST be called after all tests are
           run. You must specify a plan or use a done_testing statement, but you cannot do both.

           It is NOT strictly required to set a plan if the script is only run interactively, so if for some
           reason this module is used for test scripts which are not part of a standard perl test suite, the
           plan and done_testing statements are optional. As a matter of fact, the script will run just fine
           without them... but a perl installer will report a failure in the test suite.

       abort
              $o = new Test::Inter 'abort' => 0/1/2;
              $o->abort(0/1/2);

           The abort option can be set using an ('abort',0/1/2) option pair, or by setting the TI_ABORT
           environment variable, or the $::TI_ABORT global variable.

           If this is set to 1, the test script will run unmodified until a test fails. At that point, all
           remaining tests will be skipped.  If it is set to 2, the test script will run until a test fails at
           which point it will exit with an error code of 1.

           In both cases, todo tests will NOT trigger the abort behavior.

       quiet
              $o = new Test::Inter 'quiet' => 0/1/2;
              $o->quiet(0/1/2);

           The quiet option can be set using an ('quiet',0/1/2) option pair, or by setting the TI_QUIET
           environment variable, or the $::TI_QUIET global variable.

           If this is set to 0 (the default), all information will be printed out. If it is set to 1, some
           optional information will not be printed.  If it is set to 2, all optional information will not be
           printed.

       mode
              $o = new Test::Inter 'mode' => MODE;
              $o->mode(MODE);

           The mode option can be set using a ('mode',MODE) option pair, or by setting the TI_MODE environment
           variable, or the $::TI_MODE global variable.

           Currently, MODE can be 'test' or 'inter' meaning that the script is run as part of a test suite, or
           interactively.

           When run in test mode, it prints out the results using the TAP grammar (i.e. 'ok 1', 'not ok 3',
           etc.).

           When run in interactive mode, it prints out results in a more human readable format.

       width
              $o = new Test::Inter 'width' => WIDTH;
              $o->width(WIDTH);

           The width option can be set using a ('width',WIDTH) option pair, or by setting the TI_WIDTH
           environment variable, or the $::TI_WIDTH global variable.

           WIDTH is the width of the terminal (for printing out failed test information). It defaults to 80, but
           it can be set to any width (and lines longer then this are truncated). If WIDTH is set to 0, no
           truncation is done.

       skip_all
              $o = new Test::Inter 'skip_all' => REASON;
              $o->skip_all(REASON);

           The skip_all option can be set using an ('skip_all',REASON) option pair, or by setting the
           TI_SKIP_ALL environment variable, or the $::TI_SKIP_ALL global variable.

           If this is set, the entire test script will be skipped for the reason given. This must be done before
           any test is run, and before any plan number is set.

           The skip_all can also be called at any point during the script (i.e.  after tests have been run). In
           this case, all remaining scripts will be skipped.

              $o->skip_all(REASON,FEATURE,FEATURE,...);
              $o->skip_all('',FEATURE,FEATURE,...);

           This will skip all tests (or all remaining tests) unless all features are available.  REASON can be
           entered as an empty string and the reason the tests are skipped will be a message about the missing
           feature.

       feature
              $o->feature($feature,$val);

           This defines a feature. If $val is non-zero, the feature is available.  Otherwise it is not.

       diag
       note
              $o->diag($message);
              $o->note($message);

           Both of these print an optional message. Messages printed with the note method are always optional
           and will be omitted if the quiet option is set to 1 or 2. Messages printed with the diag method are
           optional and will not be printed if the quiet option is set to 2, but they will be printed if the
           quiet method is set to 1.

       testdir
           Occasionally, it may be necessary to know the directory where the tests live (for example, there may
           be a config or data file in there).  This method will return the directory.

METHODS FOR LOADING MODULES

       Test scripts can load other modules (using either the perl 'use' or 'require' commands).  There are three
       different modes for doing this which determine how this is done.

       required mode
           By default, this is used to test for a module that is required for all tests in the test script.

           Loading the module is treated as an actual test in the test suite. The test is to determine whether
           the module is available and can be loaded. If it can be loaded, it is, and it is reported as a
           successful test. If it cannot be loaded, it is reported as a failed test.

           In the result of a failed test, all remaining tests will be skipped automatically (except for other
           tests which load modules).

       feature mode
           In feature mode, loading the module is not treated as a test (i.e. it will not print out an 'ok' or
           'not ok' line. Instead, it will set a feature (named the same as the module) which can be used to
           determine whether other tests should run or not.

       forbid mode
           In a few very rare cases, we may want to test for a module but expect that it not be present. This is
           the exact opposite of the 'required' mode.

           Successfully loading the module is treated as a test failure. In the event of a failure, all
           remaining tests will be skipped.

       The methods available are:

       require_ok
              $o->require_ok($module [,$mode]);

           This is used to load a module using the perl 'require' function. If $mode is not passed in, the
           default mode (required) is used to test the existence of the module.

           If $mode is passed in, it must be either the string 'forbid' or 'feature'.

           If $mode is 'feature', a feature named $module is set if the module was able to be loaded.

       use_ok
              $o->use_ok(@args [,$mode]);

           This is used to load a module with 'use', or check a perl version.

              BEGIN { $o->use_ok('5.010'); }
              BEGIN { $o->use_ok('Some::Module'); }
              BEGIN { $o->use_ok('Some::Module',2.05); }
              BEGIN { $o->use_ok('Some::Module','foo','bar'); }
              BEGIN { $o->use_ok('Some::Module',2.05,'foo','bar'); }

           are the same as:

              use 5.010;
              use Some::Module;
              use Some::Module 2.05;
              use Some::Module qw(foo bar);
              use Some::Module 2.05 qw(foo bar);

           Putting the use_ok call in a BEGIN block allows the functions to be imported at compile-time and
           prototypes are properly honored.  You'll also need to load the Test::Inter module, and create the
           object in a BEGIN block.

           $mode acts the same as in the require_ok method.

METHODS FOR RUNNING TEST

       There are several methods for running tests. The ok, is, and isnt methods are included for those already
       comfortable with Test::More and wishing to stick with the same format of test script. The tests method is
       the suggested method though since it makes use of the full power of this module.

       ok
              $o->ok(TESTS);

           A test run with ok looks at a result, and if it evaluates to 0 (or false), it fails. If it evaluates
           to non-zero (or true), it passes.

           These tests do not require you to specify the expected results.  If expected results are given, they
           will be compared against the result received, and if they differ, a diagnostic message will be
           printed, but the test will still succeed or fail based only on the actual result produced.

           These tests require a single result and either zero or one expected results.

           To run a single test, use any of the following:

              $o->ok();          # always succeeds

              $o->ok($result);
              $o->ok($result,$name);
              $o->ok($result,$expected,$name);

              $o->ok(\&func);
              $o->ok(\&func,$name);
              $o->ok(\&func,$expected,$name);

              $o->ok(\&func,\@args);
              $o->ok(\&func,\@args,$name);
              $o->ok(\&func,\@args,$expected,$name);

           If $result is a scalar, the test passes if $result is true. If $result is a list reference, and the
           list is either empty, or the first element is a scalar), the test succeeds if the list contains any
           values (except for undef). If $result is a hash reference, the test succeeds if the hash contains any
           key with a value that is not undef.

           If \&func and \@args are passed in, then $result is generated by passing @args to &func and behaves
           identically to the calls where $result is passed in.  If \&func is passed in but no arguments, the
           function takes no arguments, but still produces a result.

           $result may be a scalar, list reference, or hash reference. If it is a list reference, the test
           passes is the list contains any defined values. If it is a hash reference, the test passes if any of
           the keys contain defined values.

           If an expected value is passed in and the result does not match it, a diagnostic warning will be
           printed, even if the test passes.

       is
       isnt
              $o->is(TESTS);
              $o->isnt(TESTS);

           A test run with is looks at a result and tests to see if it is identical to an expected result. If it
           is, the test passes. Otherwise it fails. In the case of a failure, a diagnostic message will show
           what result was actually obtained and what was expected.

           A test run with isnt looks at a result and tests to see if the result obtained is different than an
           expected result. If it is different, the test passes.  Otherwise it fails.

           The is method can be called in any of the following ways:

              $o->is($result,$expected);
              $o->is($result,$expected,$name);

              $o->is(\&func,$expected);
              $o->is(\&func,$expected,$name);

              $o->is(\&func,\@args,$expected);
              $o->is(\&func,\@args,$expected,$name);

           The isnt method can be called in exactly the same way.

           As with the ok method, the result can be a scalar, hashref, or listref. If it is a hashref or
           listref, the entire structure must match the expected value.

       tests
              $o->tests($opt=>$val, $opt=>$val, ...)

           The options available are described in the following section.

       file
              $o->file($func,$input,$outputdir,$expected,$name [,@args]);

           Sometimes it may be easiest to store the input, output, and expected output from a test in a text
           file. In this case, each line of output will be treated as a single test, so the output and expected
           output must match up exactly.

           $func is a reference to a function which will produce a temporary output file.

           If $input is specified, it is the name of the input file.  If it is empty, no input file will be
           used.  The input file can be fully specified, or it can be relative to the test directory.

           If $outputdir is passed in, it is the directory where the output file will be written.  It can be
           fully specified, or relative to the test directory.  If $outputdir is left blank, the temporary file
           will be written to the test directory.

           $expected is the name of a file which contains the expected output.  It can be fully specified, or it
           will be checked for in the test directory.

           $name is the name of this series of tests.

           @args are extra arguments to pass to the test function.

           The function will be called with the arguments:

              &$func( [$input,] $output,@args);

           $input is only passed in if it was passed in to this method.  If no input file is specified, nothing
           will be passed to the function.

           $output is the name of a temporary file where the output will be written to.

USING THE TESTS METHOD

       It is expected that most tests (except for those that load a module) will be run using the tests method
       called as:

          $o->tests($opt => $val, $opt => $val, ...);

       The following options are available:

       name
              name => NAME

           This sets the name of this set of tests. All tests will be given the same name.

       tests
       func
       expected
           In order to specify a series of tests, you have to specify either a function and a list of arguments,
           or a list of results.

           Specifying the function and list of arguments can be done using the pair:

              func  => \&FUNCTION
              tests => TESTS

           If the func option is not set, tests contains a list of results.

           A list of expected results may also be given. They can be included in the

              tests => TESTS

           option or included separately as:

              expected => RESULTS

           The way to specify these are covered in the next section SPECIFYING THE TESTS.

       feature
       disable
              feature => [FEATURE1, FEATURE2, ...]

              disable => [FEATURE1, FEATURE2, ...]

           The default set of tests to run is determined using the start, end, and skip_all methods discussed
           above. Using those methods, a list of tests is obtained, and it is expected that these will run.

           The feature and disable options modify the list.

           If the feature option is included, the tests given in this call will only run if ALL of the features
           listed are available.

           If the disable option is included, the tests will be run unless ANY of the features listed are
           available.

       skip
              skip => REASON

           Skip these tests for the reason given.

       todo
              todo => 0/1

           Setting this to 1 says that these tests are allowed to fail. They represent a feature that is not yet
           implemented.

           If the tests succeed, a message will be printed notifying the developer that the tests are now ready
           to promote to actual use.

SPECIFYING THE TESTS

       A series of tests can be specified in two different ways. The tests can be written in a very simple
       string format, or stored as a list.

       Demonstrating how this can be done is best done by example, so let's say that there is a function (func)
       which takes two arguments, and returns a single value.  Let's say that the expected output (and the
       actual output) from 3 different sets of arguments is:

          Input   Expected Output  Actual Output
          -----   ---------------  -------------
          1,2     a                a
          3,4     b                x
          5,6     c                c

       (so in this case, the first and third tests pass, but the 2nd one will fail).

       Specifying these tests as lists could be done as:

          $o->tests(
             func     => &func,
             tests    => [ [1,2], [3,4], [5,6] ],
             expected => [ [a],   [b],   [c] ],
          );

       Here, the tests are stored as a list, and each element in the list is a listref containing the set of
       arguments.

       If the func option is not passed in, the tests option is set to a list of results to compare with the
       expected results, so the following is equivalent to the above:

          $o->tests(
             tests    => [ [a],   [x],   [c] ],
             expected => [ [a],   [b],   [c] ],
          );

       If an argument (or actual result) or an expected result is only a single value, it can be entered as a
       scalar instead of a list ref, so the following is also equivalent:

          $o->tests(
             func     => &func,
             tests    => [ [1,2], [3,4], [5,6] ],
             expected => [ a,     b,     [c] ],
          );

       The only exception to this is if the single value is itself a list reference.  In this case it MUST be
       included as a reference. In other words, if you have a single test, and the expected value for this test
       is a list reference, it must be passed in as:

          expected => [ [ \@r ] ]

       NOT as:

          expected => [ \@r ]

       Passing in a set of expected results is optional. If none are passed in, the tests are treated as if they
       had been passed to the 'ok' method (i.e. if they return something true, they pass, otherwise they fail).

       The second way to specify tests is as a string. The string is a multi-line string with each tests being
       separate from the next test by a blank line.  Comments (lines which begin with '#') are allowed, and are
       ignored. Whitespace at the start and end of the line is ignored.

       The string may contain the results directly, or results may be passed in separately. For example, the
       following all give the same sets of tests as the example above:

          $o->tests(
             func     => &func,
             tests    => "
                          # Test 1
                          1 2 => a

                          # Test 2
                          3 4 => b

                          5 6 => c
                         ",
          );

          $o->tests(
             func     => &func,
             tests    => "
                          1 2

                          3 4

                          5 6
                         ",
              expected => [ [a], [b], [c] ]
          );

          $o->tests(
             func     => &func,
             tests    => [ [1,2], [3,4], [5,6] ],
             expected => "
                          a

                          b

                          c
                         ",
          );

          $o->tests(
             func     => &func,
             tests    => "
                          1 2

                          3 4

                          5 6
                         ",
             expected => "
                          a

                          b

                          c
                         ",
          );

       The expected results may also consist of only a single set of results (in this case, it must be passed in
       as a listref). In this case, all of the tests are expected to have the same results.

       So, the following are equivalent:

          $o->tests(
             func     => &func,
             tests    => "
                          1 2 => a b

                          3 4 => a b

                          5 6 => a b
                         ",
          );

          $o->tests(
             func     => &func,
             tests    => "
                          1 2

                          3 4

                          5 6
                         ",
             expected  => [ [a, b] ],
          );

          $o->tests(
             func     => &func,
             tests    => "
                          1 2

                          3 4

                          5 6
                         ",
             expected  => "a b",
          );

       The number of expected values must either be 1 (i.e. all of the tests are expected to produce the same
       value) or exactly the same number as the number of tests.

       The parser is actually quite powerful, and can handle multi-line tests, quoted strings, and nested data
       structures.

       The test may be split across any number of lines, provided there is not a completely blank line (which
       signals the end of the test), so the following are equivalent:

          tests => "a b c",
          tests => "a b
                    c",

       Arguments (or expected results) may include data structures. For example, the following are equivalent:

          tests => "[ a b ] { a 1 b 2 }"
          tests => [ [ [a,b], { a=>1, b=>2 } ] ]

       Whitespace is mostly optional, but there is one exception. An item must end with some kind of delimiter,
       so the following will fail:

          tests => "[a b][c d]"

       The first element (the list ref [a b]) must be separated from the second element by the delimiter (which
       is whitespace in this case), so it must be written as:

          tests => "[a b] [c d]"

       As already demonstrated, hashrefs and listrefs may be included and nested. Elements may also be included
       inside parens, but this is optional since all arguments and expected results are already treated as
       lists, so the following are equivalent:

          tests => "a b c"
          tests => "(a b) c"

       Although parens are optional, they may make things more readable, and allow you to use something other
       than whitespace as the delimiter.

       If the character immediately following the opening paren, brace, or bracket is a punctuation mark, then
       it is used as the delimiter instead of whitespace. For example, the following are all equivalent:

          [ a b c ]
          [a b c]
          [, a,b,c ]
          [, a, b, c ]

       A delimiter is a single character, and the following may not be used as a delimiter:

          any opening/closing characters () [] {}
          single or double quotes
          alphanumeric characters
          underscore

       Whitespace (including newlines) around the delimiter is ignored, so the following is valid:

          [, a,
             b,
             c ]

       Two delimiters next to each other or a trailing delimiter produce an empty string.

          "(,a,b,)" => (a, b, '')
          "(,a,,b)" => (a, '', b)

       Hashrefs may be specified by braces and the following are equivalent:

          { a 1 b 2 }
          {, a,1,b,2 }
          {, a,1,b,2, }

       Note that a trailing delimiter is ignored if there are already an even number of elements, or an empty
       string otherwise.

       Nested structures are allowed:

          "[ [1 2] [3 4] ]"

       For example,

          $o->tests(
             func     => &func,
             tests    => "a [ b c ] { d 1 e 2 } => x y"
          );

       is equivalent to:

          $o->tests(
             func     => &func,
             tests    => [ [a, [b,c], {d=>1,e=>2}] ],
             results  => [ [x,y] ],
          );

       Any single value can be surrounded by single or double quotes in order to include the delimiter. So:

          "(, a,'b,c',e )"

       is equivalent to:

          "( a b,c e )"

       Any single value can be the string '__undef__' which will be turned into an actual undef. If the value is
       '__blank__' it is turned into an empty string (''), though it can also be specified as '' directly. Any
       value can have an embedded newline by including a __nl__ in the value, but the value must be written on a
       single line.

       Expected results are separated from arguments by ' => '.

ENVIRONMENT VARIABLES

       To summarize the information above, the following environment variables (and main:: variables) exist.
       Each can be set in a perl script as a variable in the main namespace:

          $::TI_END

       or as an environment variable:

          $ENV{TI_END}

       TI_START
           Set this to define the test you want to start with.

           Example: If you have a perl test script (my_test_script) and you want to start running it at test 12,
           run the following shell commands:

              TI_START=12
              ./my_test_script.t

       TI_END
           Set this to define the test you want to end with.

       TI_TESTNUM
           Set this to run only a single test

       TI_QUIET
           How verbose the test script is.

       TI_MODE
           How the output is formatted.

       TI_WIDTH
           The width of the terminal.

       TI_NOCLEAN
           When running a file test, the temporary output file will not be removed if this is set.

HISTORY

       The history of this module dates back to 1996 when I needed to write a test suite for my Date::Manip
       module. At that time, none of the Test::* modules currently available in CPAN existed (the earliest ones
       didn't come along until 1998), so I was left completely on my own writing my test scripts.

       I wrote a very basic version of my test framework which allowed me to write all of the tests as a string,
       it would parse the string, count the tests, and then run them.

       Over the years, the functionality I wanted grew, and periodically, I'd go back and reexamine other Test
       frameworks (primarily Test::More) to see if I could replace my framework with an existing module... and
       I've always found them wanting, and chosen to extend my existing framework instead.

       As I've written other modules, I've wanted to use the framework in them too, so I've always just copied
       it in, but this is obviously tedious and error prone. I'm not sure why it took me so long... but in 2010,
       I finally decided it was time to rework the framework in a module form.

       I loosely based my module on Test::More. I like the functionality of that module, and wanted most of it
       (and I plan on adding more in future versions).  So this module uses some similar syntax to Test::More
       (though it allows a great deal more flexibility in how the tests are specified).

       One thing to note is that I may have been able to write this module as an extension to Test::More, but
       after looking into that possibility, I decided that it would be faster to not do that. I did "borrow" a
       couple of routines from it (though they've been modified quite heavily) as a starting point for a few of
       the functions in this module, and I thank the authors of Test::More for their work.

KNOWN BUGS AND LIMITATIONS

       None known.

SEE ALSO

       Test::More - the 'industry standard' of perl test frameworks

LICENSE

       This script is free software; you can redistribute it and/or modify it under the same terms as Perl
       itself.

AUTHOR

       Sullivan Beck (sbeck@cpan.org)