Provided by: libtest-lwp-useragent-perl_0.033-1_all 
NAME
Test::LWP::UserAgent - A LWP::UserAgent suitable for simulating and testing network calls
VERSION
version 0.033
SYNOPSIS
In your application code:
use URI;
use HTTP::Request::Common;
use LWP::UserAgent;
my $useragent = $self->useragent || LWP::UserAgent->new;
my $uri = URI->new('http://example.com');
$uri->port('3000');
$uri->path('success');
my $request = POST($uri, a => 1);
my $response = $useragent->request($request);
Then, in your tests:
use Test::LWP::UserAgent;
use Test::More;
my $useragent = Test::LWP::UserAgent->new;
$useragent->map_response(
qr{example.com/success}, HTTP::Response->new('200', 'OK', ['Content-Type' => 'text/plain'], ''));
$useragent->map_response(
qr{example.com/fail}, HTTP::Response->new('500', 'ERROR', ['Content-Type' => 'text/plain'], ''));
# now, do something that sends a request, and test how your application
# responds to that response
DESCRIPTION
This module is a subclass of LWP::UserAgent which overrides a few key low-level methods
that are concerned with actually sending your request over the network, allowing an
interception of that request and simulating a particular response. This greatly
facilitates testing of client networking code where the server follows a known protocol.
The synopsis describes a typical case where you want to test how your application reacts
to various responses from the server. This module will let you send back various
responses depending on the request, without having to set up a real server to test
against. This can be invaluable when you need to test edge cases or error conditions that
are not normally returned from the server.
There are a lot of different ways you can set up the response mappings, and hook into this
module; see the documentation for the individual interface methods.
You can use a PSGI app to handle the requests - see examples/call_psgi.t in this
distribution, and also "register_psgi" below.
OR, you can route some or all requests through the network as normal, but still gain the
hooks provided by this class to test what was sent and received:
my $useragent = Test::LWP::UserAgent->new(network_fallback => 1);
or:
$useragent->map_network_response(qr/real.network.host/);
# ... generate a request...
# and then in your tests:
is(
$useragent->last_useragent->timeout,
180,
'timeout was overridden properly',
);
is(
$useragent->last_http_request_sent->uri,
'uri my code should have constructed',
);
is(
$useragent->last_http_response_received->code,
'200',
'I should have gotten an OK response',
);
Ensuring the right useragent is used
Note that LWP::UserAgent itself is not monkey-patched - you must use this module (or a
subclass) to send your request, or it cannot be caught and processed.
One common mechanism to swap out the useragent implementation is via a lazily-built Moose
attribute; if no override is provided at construction time, default to
"LWP::UserAgent->new(%options)".
Additionally, most methods can be called as class methods, which will store the settings
globally, so that any instance of Test::LWP::UserAgent can use them, which can simplify
some of your application code.
METHODS
"new"
Accepts all options as in LWP::UserAgent, including "use_eval", an undocumented boolean
which is enabled by default. When set, sending the HTTP request is wrapped in an "eval
{}", allowing all exceptions to be caught and an appropriate error response (usually HTTP
500) to be returned. You may want to unset this if you really want to test extraordinary
errors within your networking code. Normally, you should leave it alone, as
LWP::UserAgent and this module are capable of handling normal errors.
Plus, this option is added:
• "network_fallback => <boolean>"
If true, requests passing through this object that do not match a previously-
configured mapping or registration will be directed to the network. (To only divert
matched requests rather than unmatched requests, use "map_network_response", see
below.)
This option is also available as a read/write accessor via
"$useragent->network_fallback(<value?>)".
All other methods below may be called on a specific object instance, or as a class method.
If the method invoked on a blessed object, the action performed or data returned is
limited to just that object; if it is called as a class method, the action or data is
global and affects all instances (although specific instances may have overrides; see
below).
"map_response($request_specification, $http_response)"
With this method, you set up what HTTP::Response should be returned for each request
received.
The request match specification can be described in multiple ways:
• string
The string is matched identically against the "host" field of the URI in the request.
$test_ua->map_response('example.com', HTTP::Response->new('500'));
• regexp
The regexp is matched against the URI in the request.
$test_ua->map_response(qr{foo/bar}, HTTP::Response->new('200'));
$test_ua->map_response(qr{baz/quux}, HTTP::Response->new('500'));
• code
The provided coderef is passed a single argument, the HTTP::Request, and returns a
boolean indicating if there is a match.
# matches all GET and POST requests
$test_ua->map_response(sub {
my $request = shift;
return 1 if $request->method eq 'GET' || $request->method eq 'POST';
},
HTTP::Response->new('200'),
);
• HTTP::Request object
The HTTP::Request object is matched identically (including all query parameters,
headers etc) against the provided object.
The response can be represented in multiple ways:
• a literal HTTP::Response object:
HTTP::Response->new(...);
• as a coderef that is run at the time of matching, with the request passed as the
single argument:
sub {
my $request = shift;
return HTTP::Response->new(...);
}
•
a blessed object that implements the "request" method, which will be saved as a
coderef thusly (this allows you to use your own dispatcher implementation):
sub {
my $request = shift;
return $response->request($request);
}
Instance mappings take priority over global (class method) mappings - if no matches are
found from mappings added to the instance, the global mappings are then examined. When no
matches have been found, a 404 response is returned.
This method returns the "Test::LWP::UserAgent" object or class.
"map_network_response($request_specification)"
Same as "map_response" above, only requests that match this specification will not use a
response that you specify, but instead uses a real LWP::UserAgent to dispatch your request
to the network.
If called on an instance, all options passed to the constructor (e.g. timeout) are used
for making the real network call. If called as a class method, a pristine LWP::UserAgent
object with no customized options will be used instead.
This method returns the "Test::LWP::UserAgent" object or class.
"unmap_all(instance_only?)"
When called as a class method, removes all mappings set up globally (across all objects).
Mappings set up on an individual object will still remain.
When called as an object method, removes all mappings both globally and on this instance,
unless a true value is passed as an argument, in which only mappings local to the object
will be removed. (Any true value will do, so you can pass a meaningful string.)
This method returns the "Test::LWP::UserAgent" object or class.
"register_psgi($domain, $app)"
Register a particular PSGI app (code reference) to be used when requests for a domain are
received (matches are made exactly against "$request->uri->host"). The request is passed
to the $app for processing, and the PSGI response is converted back to an HTTP::Response
(you must already have loaded HTTP::Message::PSGI or equivalent, as this is not done for
you).
You can also use "register_psgi" with a regular expression as the first argument, or any
of the other forms used by "map_response", if you wish, as calling
"$test_ua->register_psgi($domain, $app)" is equivalent to:
$test_ua->map_response(
$domain,
sub { HTTP::Response->from_psgi($app->($_[0]->to_psgi)) },
);
This feature is useful for testing your PSGI applications, or for simulating a server so
as to test your client code.
You might find using Plack::Test or Plack::Test::ExternalServer easier for your needs, so
check those out as well.
This method returns the "Test::LWP::UserAgent" object or class.
"unregister_psgi($domain, instance_only?)"
When called as a class method, removes a domain->PSGI app entry that had been registered
globally. Some mappings set up on an individual object may still remain.
When called as an object method, removes a domain registration that was made both globally
and locally, unless a true value was passed as the second argument, in which case only the
registration local to the object will be removed. This allows a different mapping made
globally to take over.
If you want to mask a global registration on just one particular instance, then add
"undef" as a mapping on your instance:
$useragent->map_response($domain, undef);
This method returns the "Test::LWP::UserAgent" object or class.
"last_http_request_sent"
The last HTTP::Request object that this object (if called on an object) or module (if
called as a class method) processed, whether or not it matched a mapping you set up
earlier.
Note that this is also available via "last_http_response_received->request".
"last_http_response_received"
The last HTTP::Response object that this module returned, as a result of a mapping you set
up earlier with "map_response". You shouldn't normally need to use this, as you know what
you responded with - you should instead be testing how your code reacted to receiving this
response.
"last_useragent"
The last Test::LWP::UserAgent object that was used to send a request. Obviously this only
provides new information if called as a class method; you can use this if you don't have
direct control over the useragent itself, to get the object that was used, to verify
options such as the network timeout.
"network_fallback"
Getter/setter method for the network_fallback preference that will be used on this object
(if called as an instance method), or globally, if called as a class method. Note that
the actual behaviour used on an object is the ORed value of the instance setting and the
global setting.
"send_request($request)"
This is the only method from LWP::UserAgent that has been overridden, which processes the
HTTP::Request, sends to the network, then creates the HTTP::Response object from the reply
received. Here, we loop through your local and global domain registrations, and local and
global mappings (in this order) and returns the first match found; otherwise, a simple 404
response is returned (unless "network_fallback" was specified as a constructor option, in
which case unmatched requests will be delivered to the network.)
All other methods from LWP::UserAgent are available unchanged.
Usage with SOAP requests
SOAP::Lite
To use this module when communicating via SOAP::Lite with a SOAP server (either a real
one, with live network requests, see above or with one simulated with mapped responses),
simply do this:
use SOAP::Lite;
use SOAP::Transport::HTTP;
$SOAP::Transport::HTTP::Client::USERAGENT_CLASS = 'Test::LWP::UserAgent';
You must then make all your configuration changes and mappings globally.
See also "CHANGING THE DEFAULT USERAGENT CLASS" in SOAP::Transport.
XML::Compile::SOAP
When using XML::Compile::SOAP with a compiled WSDL, you can change the useragent object
via XML::Compile::Transport::SOAPHTTP:
my $call = $wsdl->compileClient(
$interface_name,
transport => XML::Compile::Transport::SOAPHTTP->new(
user_agent => $useragent,
address => $wsdl->endPoint,
),
);
See also "Adding HTTP headers" in XML::Compile::SOAP::FAQ.
MOTIVATION
Most mock libraries on the CPAN use Test::MockObject, which is widely considered not good
practice (among other things, @ISA is violated, it requires knowing far too much about the
module's internals, and is very clumsy to work with). (This blog entry is one of many
that chronicles its issues.)
This module is a direct descendant of LWP::UserAgent, exports nothing into your namespace,
and all access is via method calls, so it is fully inheritable should you desire to add
more features or override some bits of functionality.
(Aside from the constructor), it only overrides the one method in LWP::UserAgent that
issues calls to the network, so real HTTP::Request and HTTP::Headers objects are used
throughout. It provides a method ("last_http_request_sent") to access the last
HTTP::Request, for testing things like the URI and headers that your code sent to
LWP::UserAgent.
ACKNOWLEDGEMENTS
AirG Inc. <http://corp.airg.com>, my former employer, and the first user of this
distribution.
mst - Matt S. Trout <mst@shadowcat.co.uk>, for the better name of this distribution, and
for the PSGI registration concept.
Also Yury Zavarin, whose Test::Mock::LWP::Dispatch inspired me to write this module, and
from where I borrowed some aspects of the API.
SEE ALSO
• Perl advent article, 2012 <http://www.perladvent.org/2012/2012-12-12.html>
• Test::Mock::LWP::Dispatch
• Test::Mock::LWP::UserAgent
• URI, HTTP::Request, HTTP::Response
• LWP::UserAgent
• PSGI, HTTP::Message::PSGI, LWP::Protocol::PSGI,
• Plack::Test, Plack::Test::ExternalServer
SUPPORT
Bugs may be submitted through the RT bug tracker
<https://rt.cpan.org/Public/Dist/Display.html?Name=Test-LWP-UserAgent> (or
bug-Test-LWP-UserAgent@rt.cpan.org <mailto:bug-Test-LWP-UserAgent@rt.cpan.org>).
There is also a mailing list available for users of this distribution, at
<http://lists.perl.org/list/perl-qa.html>.
There is also an irc channel available for users of this distribution, at "#perl" on
"irc.perl.org" <irc://irc.perl.org/#perl-qa>.
I am also usually active on irc, as 'ether' at "irc.perl.org".
AUTHOR
Karen Etheridge <ether@cpan.org>
CONTRIBUTOR
Tom Hukins <tom@eborcom.com>
COPYRIGHT AND LICENCE
This software is copyright (c) 2012 by Karen Etheridge.
This is free software; you can redistribute it and/or modify it under the same terms as
the Perl 5 programming language system itself.