Provided by: perl-tk_804.033-2build1_amd64 
NAME
Tk::form - Geometry manager based on attachment rules
SYNOPSIS
$widget->form?(args)?
$widget->formOption?(args)?
DESCRIPTION
The form method is used to communicate with the form Geometry Manager, a geometry manager
that arranges the geometry of the children in a parent window according to attachment
rules. The form geometry manager is very flexible and powerful; it can be used to emulate
all the existing features of the Tk packer and placer geometry managers (see pack, place).
The form method can have any of several forms, depending on Option:
$slave->form?(options)?
Sets or adjusts the attachment values of the slave window according to the
-option=>value argument pairs.
-b => attachment
Abbreviation for the -bottom option.
-bottom => attachment
Specifies an attachment for the bottom edge of the slave window. The
attachment must specified according to "SPECIFYING ATTACHMENTS" below.
-bottomspring => weight
Specifies the weight of the spring at the bottom edge of the slave window. See
"USING SPRINGS" below.
-bp => value
Abbreviation for the -padbottom option.
-bs => weight
Abbreviation for the -bottomspring option.
-fill => style
Specifies the fillings when springs are used for this widget. The value must
be x, y, both or none.
-in => $master
Places the slave window into the specified $master window. If the slave was
originally in another master window, all attachment values with respect to the
original master window are discarded. Even if the attachment values are the
same as in the original master window, they need to be specified again. The
-in flag, when needed, must appear as the first flag of options. Otherwise an
error is generated.
-l => attachment
Abbreviation for the -left option.
-left => attachment
Specifies an attachment for the left edge of the slave window. The attachment
must specified according to "SPECIFYING ATTACHMENTS" below.
-leftspring => weight
Specifies the weight of the spring at the left edge of the slave window. See
"USING SPRINGS" below.
-lp => value
Abbreviation for the -padleft option.
-ls => weight
Abbreviation for the -leftspring option.
-padbottom => value
Specifies the amount of external padding to leave on the bottom side of the
slave. The value may have any of the forms acceptable to Tk_GetPixels.
-padleft => value
Specifies the amount of external padding to leave on the left side of the
slave.
-padright => value
Specifies the amount of external padding to leave on the right side of the
slave.
-padtop => value
Specifies the amount of external padding to leave on the top side of the
slave.
-padx => value
Specifies the amount of external padding to leave on both the left and the
right sides of the slave.
-pady => value
Specifies the amount of external padding to leave on both the top and the
bottom sides of the slave.
-r => attachment
Abbreviation for the -right option.
-right => attachment
Specifies an attachment for the right edge of the slave window. The attachment
must specified according to "SPECIFYING ATTACHMENTS" below.
-rightspring => weight
Specifies the weight of the spring at the right edge of the slave window. See
"USING SPRINGS" below.
-rp => value
Abbreviation for the -padright option.
-rs => weight
Abbreviation for the -rightspring option.
-t => attachment
Abbreviation for the -top option.
-top => attachment
Specifies an attachment for the top edge of the slave window. The attachment
must specified according to "SPECIFYING ATTACHMENTS" below.
-topspring => weight
Specifies the weight of the spring at the top edge of the slave window. See
"USING SPRINGS" below.
-tp => value
Abbreviation for the -padtop option.
-ts => weight
Abbreviation for the -topspring option.
$master->formCheck
This method checks whether there is circular dependency in the attachments of the
master's slaves (see "CIRCULAR DEPENDENCY" below). It returns the Boolean value TRUE
if it discover circular dependency and FALSE otherwise.
$slave->formForget
Removes the slave from its master and unmaps its window. The slave will no longer be
managed by form. All attachment values with respect to its master window are
discarded. If another slave is attached to this slave, then the attachment of the
other slave will be changed to grid attachment based on its geometry.
$master->formGrid?(x_size, y_size)?
When x_size and y_size are given, this method returns the number of grids of the
$master window in a pair of integers of the form (x_size, y_size). When both x_size
and y_size are given, this method changes the number of horizontal and vertical grids
on the master window.
$slave->formInfo?(-option)?
Queries the attachment options of a slave window. -option can be any of the options
accepted by the form method. If -option is given, only the value of that option is
returned. Otherwise, this method returns a list whose elements are the current
configuration state of the slave given in the same option-value form that might be
specified to form. The first two elements in this list list are "-in=>$master" where
$master is the slave's master window.
$master->formSlaves
Returns a list of all of the slaves for the master window. The order of the slaves in
the list is the same as their order in the packing order. If master has no slaves then
an empty string is returned.
SPECIFYING ATTACHMENTS
One can specify an attachment for each side of a slave window managed by form. An
attachment is specified in the the form "-side => [anchor_point, offset]". -side can be
one of -top, -bottom, -left or -right.
Offset is given in screen units (i.e. any of the forms acceptable to Tk_GetPixels). A
positive offset indicates shifting to a position to the right or bottom of an anchor
point. A negative offset indicates shifting to a position to the left or top of an anchor
point.
Anchor_point can be given in one of the following forms:
Grid Attachment
The master window is divided into a number of horizontal and vertical grids. By
default the master window is divided into 100x100 grids; the number of grids can be
adjusted by the formGrid method. A grid attachment anchor point is given by a % sign
followed by an integer value. For example, '%0' specifies the first grid line (the top
or left edge of the master window). '%100' specifies the last grid line (the bottom or
right edge of the master window).
Opposite Side Attachment
Opposite attachment specifies an anchor point located on the opposite side of another
slave widget, which must be managed by form in the same master window. An opposite
attachment anchor point is given by the name of another widget. For example,
"$b->form(-top=>[$a,0])" attaches the top side of the widget $b to the bottom of the
widget $a.
Parallel Side Attachment
Opposite attachment specifies an anchor point located on the same side of another
slave widget, which must be managed by form in the same master window. An parallel
attachment anchor point is given by the sign & follwed by the name of another widget.
For example, "$b->form(-top=>['&',$a,0])" attaches the top side of the widget $b to
the top of the widget $a, making the top sides of these two widgets at the same
vertical position in their parent window.
No Attachment
Specifies a side of the slave to be attached to nothing, indicated by the keyword
none. When the none anchor point is given, the offset must be zero (or not present).
When a side of a slave is attached to ['none', 0], the position of this side is
calculated by the position of the other side and the natural size of the slave. For
example, if a the left side of a widget is attached to ['%0', 100], its right side
attached to ['none', 0], and the natural size of the widget is 50 pixels, the right
side of the widget will be positioned at pixel ['%0', 149]. When both -top and
-bottom are attached to none, then by default -top will be attached to ['%0', 0]. When
both -left and -right are attached to none, then by default -left will be attached to
['%0', 0].
Shifting effects can be achieved by specifying a non-zero offset with an anchor point. In
the following example, the top side of widget \$b is attached to the bottom of \$a; hence
\$b always appears below \$a. Also, the left edge of \$b is attached to the left side of
\$a with a 10 pixel offest. Therefore, the left edge of \$b is always shifted 10 pixels
to the right of \$a's left edge:
$b->form(-left=>[$a,10], -top=>[$a,0]);
ABBREVIATIONS:
Certain abbreviations can be made on the attachment specifications: First an offset of
zero can be omitted. Thus, the following two lines are equivalent:
$b->form(-top=>[$a,0], -right=>['%100',0]);
$b->form(-top=>[$a], -right=>'%100');
In the second case, when the anchor point is omitted, the offset must be given. A default
anchor point is chosen according to the value of the offset. If the anchor point is 0 or
positive, the default anchor point %0 is used; thus, "$b->form(-top=>15)" attaches the top
edge of $b to a position 15 pixels below the top edge of the master window. If the anchor
point is "-0" or negative, the default anchor point %100 is used; thus,
"$a->form(-right=>-2)" attaches the right edge of \$a to a position 2 pixels to the left
of the master window's right edge. An further example below shows a method with its
equivalent abbreviation.
$b->form(-top=>['%0',10], -bottom=>['%100',0]);
$b->form(-top=>10, -bottom=>-0);
USING SPRINGS
To be written.
ALGORITHM OF FORM
form starts with any slave in the list of slaves of the master window. Then it tries to
determine the position of each side of the slave.
If the attachment of a side of the slave is grid attachment, the position of the side is
readily determined.
If the attachment of this side is none, then form tries to determine the position of the
opposite side first, and then use the position of the opposite side and the natural size
of the slave to determine the position of this side.
If the attachment is opposite or parallel widget attachments, then form tries to determine
the positions of the other widget first, and then use the positions of the other widget
and the natural size of the slave determine the position of this side. This recursive
algorithmis carried on until the positions of all slaves are determined.
CIRCULAR DEPENDENCY
The algorithm of form will fail if a circular dependency exists in the attachments of the
slaves. For example:
$c->form(-left=>$b);
$b->form(-right=>$c);
In this example, the position of the left side of $b depends on the right side of $c,
which in turn depends on the left side of $b.
When a circular dependency is discovered during the execution of the form algorithm, form
will generate a background error and the geometry of the slaves are undefined (and will be
arbitrary). Notice that form only executes the algorithm when the specification of the
slaves' attachments is complete. Therefore, it allows intermediate states of circular
dependency during the specification of the slaves' attachments. Also, unlike the Motif
Form manager widget, form defines circular dependency as ``dependency in the same
dimension''. Therefore, the following code fragment will does not have circular
dependency because the two widgets do not depend on each other in the same dimension ($b
depends $c in the horizontal dimension and $c depends on $b in the vertical dimension):
$b->form(-left=>$c);
$c->form(-top=>$b);
BUGS
Springs have not been fully implemented yet.
SEE ALSO
Tk::grid Tk::pack Tk::place
KEYWORDS
geometry manager, form, attachment, spring, propagation, size, pack, tix, master, slave