Provided by: erlang-manpages_20.2.2+dfsg-1ubuntu2_all 
NAME
binary - Library for handling binary data.
DESCRIPTION
This module contains functions for manipulating byte-oriented binaries. Although the
majority of functions could be provided using bit-syntax, the functions in this library
are highly optimized and are expected to either execute faster or consume less memory, or
both, than a counterpart written in pure Erlang.
The module is provided according to Erlang Enhancement Proposal (EEP) 31.
Note:
The library handles byte-oriented data. For bitstrings that are not binaries (does not
contain whole octets of bits) a badarg exception is thrown from any of the functions in
this module.
DATA TYPES
cp()
Opaque data type representing a compiled search pattern. Guaranteed to be a tuple()
to allow programs to distinguish it from non-precompiled search patterns.
part() = {Start :: integer() >= 0, Length :: integer()}
A representaion of a part (or range) in a binary. Start is a zero-based offset into
a binary() and Length is the length of that part. As input to functions in this
module, a reverse part specification is allowed, constructed with a negative
Length, so that the part of the binary begins at Start + Length and is -Length
long. This is useful for referencing the last N bytes of a binary as {size(Binary),
-N}. The functions in this module always return part()s with positive Length.
EXPORTS
at(Subject, Pos) -> byte()
Types:
Subject = binary()
Pos = integer() >= 0
Returns the byte at position Pos (zero-based) in binary Subject as an integer. If
Pos >= byte_size(Subject), a badarg exception is raised.
bin_to_list(Subject) -> [byte()]
Types:
Subject = binary()
Same as bin_to_list(Subject, {0,byte_size(Subject)}).
bin_to_list(Subject, PosLen) -> [byte()]
Types:
Subject = binary()
PosLen = part()
Converts Subject to a list of byte()s, each representing the value of one byte.
part() denotes which part of the binary() to convert.
Example:
1> binary:bin_to_list(<<"erlang">>, {1,3}).
"rla"
%% or [114,108,97] in list notation.
If PosLen in any way references outside the binary, a badarg exception is raised.
bin_to_list(Subject, Pos, Len) -> [byte()]
Types:
Subject = binary()
Pos = integer() >= 0
Len = integer()
Same as bin_to_list(Subject, {Pos, Len}).
compile_pattern(Pattern) -> cp()
Types:
Pattern = binary() | [binary()]
Builds an internal structure representing a compilation of a search pattern, later
to be used in functions match/3, matches/3, split/3, or replace/4. The cp()
returned is guaranteed to be a tuple() to allow programs to distinguish it from
non-precompiled search patterns.
When a list of binaries is specified, it denotes a set of alternative binaries to
search for. For example, if [<<"functional">>,<<"programming">>] is specified as
Pattern, this means either <<"functional">> or <<"programming">>". The pattern is a
set of alternatives; when only a single binary is specified, the set has only one
element. The order of alternatives in a pattern is not significant.
The list of binaries used for search alternatives must be flat and proper.
If Pattern is not a binary or a flat proper list of binaries with length > 0, a
badarg exception is raised.
copy(Subject) -> binary()
Types:
Subject = binary()
Same as copy(Subject, 1).
copy(Subject, N) -> binary()
Types:
Subject = binary()
N = integer() >= 0
Creates a binary with the content of Subject duplicated N times.
This function always creates a new binary, even if N = 1. By using copy/1 on a
binary referencing a larger binary, one can free up the larger binary for garbage
collection.
Note:
By deliberately copying a single binary to avoid referencing a larger binary, one
can, instead of freeing up the larger binary for later garbage collection, create
much more binary data than needed. Sharing binary data is usually good. Only in
special cases, when small parts reference large binaries and the large binaries are
no longer used in any process, deliberate copying can be a good idea.
If N < 0, a badarg exception is raised.
decode_unsigned(Subject) -> Unsigned
Types:
Subject = binary()
Unsigned = integer() >= 0
Same as decode_unsigned(Subject, big).
decode_unsigned(Subject, Endianness) -> Unsigned
Types:
Subject = binary()
Endianness = big | little
Unsigned = integer() >= 0
Converts the binary digit representation, in big endian or little endian, of a
positive integer in Subject to an Erlang integer().
Example:
1> binary:decode_unsigned(<<169,138,199>>,big).
11111111
encode_unsigned(Unsigned) -> binary()
Types:
Unsigned = integer() >= 0
Same as encode_unsigned(Unsigned, big).
encode_unsigned(Unsigned, Endianness) -> binary()
Types:
Unsigned = integer() >= 0
Endianness = big | little
Converts a positive integer to the smallest possible representation in a binary
digit representation, either big endian or little endian.
Example:
1> binary:encode_unsigned(11111111, big).
<<169,138,199>>
first(Subject) -> byte()
Types:
Subject = binary()
Returns the first byte of binary Subject as an integer. If the size of Subject is
zero, a badarg exception is raised.
last(Subject) -> byte()
Types:
Subject = binary()
Returns the last byte of binary Subject as an integer. If the size of Subject is
zero, a badarg exception is raised.
list_to_bin(ByteList) -> binary()
Types:
ByteList = iodata()
Works exactly as erlang:list_to_binary/1, added for completeness.
longest_common_prefix(Binaries) -> integer() >= 0
Types:
Binaries = [binary()]
Returns the length of the longest common prefix of the binaries in list Binaries.
Example:
1> binary:longest_common_prefix([<<"erlang">>, <<"ergonomy">>]).
2
2> binary:longest_common_prefix([<<"erlang">>, <<"perl">>]).
0
If Binaries is not a flat list of binaries, a badarg exception is raised.
longest_common_suffix(Binaries) -> integer() >= 0
Types:
Binaries = [binary()]
Returns the length of the longest common suffix of the binaries in list Binaries.
Example:
1> binary:longest_common_suffix([<<"erlang">>, <<"fang">>]).
3
2> binary:longest_common_suffix([<<"erlang">>, <<"perl">>]).
0
If Binaries is not a flat list of binaries, a badarg exception is raised.
match(Subject, Pattern) -> Found | nomatch
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Found = part()
Same as match(Subject, Pattern, []).
match(Subject, Pattern, Options) -> Found | nomatch
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Found = part()
Options = [Option]
Option = {scope, part()}
part() = {Start :: integer() >= 0, Length :: integer()}
Searches for the first occurrence of Pattern in Subject and returns the position
and length.
The function returns {Pos, Length} for the binary in Pattern, starting at the
lowest position in Subject.
Example:
1> binary:match(<<"abcde">>, [<<"bcde">>, <<"cd">>],[]).
{1,4}
Even though <<"cd">> ends before <<"bcde">>, <<"bcde">> begins first and is
therefore the first match. If two overlapping matches begin at the same position,
the longest is returned.
Summary of the options:
{scope, {Start, Length}}:
Only the specified part is searched. Return values still have offsets from the
beginning of Subject. A negative Length is allowed as described in section Data
Types in this manual.
If none of the strings in Pattern is found, the atom nomatch is returned.
For a description of Pattern, see function compile_pattern/1.
If {scope, {Start,Length}} is specified in the options such that Start > size of
Subject, Start + Length < 0 or Start + Length > size of Subject, a badarg exception
is raised.
matches(Subject, Pattern) -> Found
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Found = [part()]
Same as matches(Subject, Pattern, []).
matches(Subject, Pattern, Options) -> Found
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Found = [part()]
Options = [Option]
Option = {scope, part()}
part() = {Start :: integer() >= 0, Length :: integer()}
As match/2, but Subject is searched until exhausted and a list of all non-
overlapping parts matching Pattern is returned (in order).
The first and longest match is preferred to a shorter, which is illustrated by the
following example:
1> binary:matches(<<"abcde">>,
[<<"bcde">>,<<"bc">>,<<"de">>],[]).
[{1,4}]
The result shows that <<"bcde">> is selected instead of the shorter match <<"bc">>
(which would have given raise to one more match, <<"de">>). This corresponds to the
behavior of POSIX regular expressions (and programs like awk), but is not
consistent with alternative matches in re (and Perl), where instead lexical
ordering in the search pattern selects which string matches.
If none of the strings in a pattern is found, an empty list is returned.
For a description of Pattern, see compile_pattern/1. For a description of available
options, see match/3.
If {scope, {Start,Length}} is specified in the options such that Start > size of
Subject, Start + Length < 0 or Start + Length is > size of Subject, a badarg
exception is raised.
part(Subject, PosLen) -> binary()
Types:
Subject = binary()
PosLen = part()
Extracts the part of binary Subject described by PosLen.
A negative length can be used to extract bytes at the end of a binary:
1> Bin = <<1,2,3,4,5,6,7,8,9,10>>.
2> binary:part(Bin, {byte_size(Bin), -5}).
<<6,7,8,9,10>>
Note:
part/2 and part/3 are also available in the erlang module under the names
binary_part/2 and binary_part/3. Those BIFs are allowed in guard tests.
If PosLen in any way references outside the binary, a badarg exception is raised.
part(Subject, Pos, Len) -> binary()
Types:
Subject = binary()
Pos = integer() >= 0
Len = integer()
Same as part(Subject, {Pos, Len}).
referenced_byte_size(Binary) -> integer() >= 0
Types:
Binary = binary()
If a binary references a larger binary (often described as being a subbinary), it
can be useful to get the size of the referenced binary. This function can be used
in a program to trigger the use of copy/1. By copying a binary, one can dereference
the original, possibly large, binary that a smaller binary is a reference to.
Example:
store(Binary, GBSet) ->
NewBin =
case binary:referenced_byte_size(Binary) of
Large when Large > 2 * byte_size(Binary) ->
binary:copy(Binary);
_ ->
Binary
end,
gb_sets:insert(NewBin,GBSet).
In this example, we chose to copy the binary content before inserting it in
gb_sets:set() if it references a binary more than twice the data size we want to
keep. Of course, different rules apply when copying to different programs.
Binary sharing occurs whenever binaries are taken apart. This is the fundamental
reason why binaries are fast, decomposition can always be done with O(1)
complexity. In rare circumstances this data sharing is however undesirable, why
this function together with copy/1 can be useful when optimizing for memory use.
Example of binary sharing:
1> A = binary:copy(<<1>>, 100).
<<1,1,1,1,1 ...
2> byte_size(A).
100
3> binary:referenced_byte_size(A)
100
4> <<_:10/binary,B:10/binary,_/binary>> = A.
<<1,1,1,1,1 ...
5> byte_size(B).
10
6> binary:referenced_byte_size(B)
100
Note:
Binary data is shared among processes. If another process still references the
larger binary, copying the part this process uses only consumes more memory and
does not free up the larger binary for garbage collection. Use this kind of
intrusive functions with extreme care and only if a real problem is detected.
replace(Subject, Pattern, Replacement) -> Result
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Replacement = Result = binary()
Same as replace(Subject, Pattern, Replacement,[]).
replace(Subject, Pattern, Replacement, Options) -> Result
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Replacement = binary()
Options = [Option]
Option = global | {scope, part()} | {insert_replaced, InsPos}
InsPos = OnePos | [OnePos]
OnePos = integer() >= 0
An integer() =< byte_size(Replacement)
Result = binary()
Constructs a new binary by replacing the parts in Subject matching Pattern with the
content of Replacement.
If the matching subpart of Subject giving raise to the replacement is to be
inserted in the result, option {insert_replaced, InsPos} inserts the matching part
into Replacement at the specified position (or positions) before inserting
Replacement into Subject.
Example:
1> binary:replace(<<"abcde">>,<<"b">>,<<"[]">>, [{insert_replaced,1}]).
<<"a[b]cde">>
2> binary:replace(<<"abcde">>,[<<"b">>,<<"d">>],<<"[]">>,[global,{insert_replaced,1}]).
<<"a[b]c[d]e">>
3> binary:replace(<<"abcde">>,[<<"b">>,<<"d">>],<<"[]">>,[global,{insert_replaced,[1,1]}]).
<<"a[bb]c[dd]e">>
4> binary:replace(<<"abcde">>,[<<"b">>,<<"d">>],<<"[-]">>,[global,{insert_replaced,[1,2]}]).
<<"a[b-b]c[d-d]e">>
If any position specified in InsPos > size of the replacement binary, a badarg
exception is raised.
Options global and {scope, part()} work as for split/3. The return type is always a
binary().
For a description of Pattern, see compile_pattern/1.
split(Subject, Pattern) -> Parts
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Parts = [binary()]
Same as split(Subject, Pattern, []).
split(Subject, Pattern, Options) -> Parts
Types:
Subject = binary()
Pattern = binary() | [binary()] | cp()
Options = [Option]
Option = {scope, part()} | trim | global | trim_all
Parts = [binary()]
Splits Subject into a list of binaries based on Pattern. If option global is not
specified, only the first occurrence of Pattern in Subject gives rise to a split.
The parts of Pattern found in Subject are not included in the result.
Example:
1> binary:split(<<1,255,4,0,0,0,2,3>>, [<<0,0,0>>,<<2>>],[]).
[<<1,255,4>>, <<2,3>>]
2> binary:split(<<0,1,0,0,4,255,255,9>>, [<<0,0>>, <<255,255>>],[global]).
[<<0,1>>,<<4>>,<<9>>]
Summary of options:
{scope, part()}:
Works as in match/3 and matches/3. Notice that this only defines the scope of
the search for matching strings, it does not cut the binary before splitting.
The bytes before and after the scope are kept in the result. See the example
below.
trim:
Removes trailing empty parts of the result (as does trim in re:split/3.
trim_all:
Removes all empty parts of the result.
global:
Repeats the split until Subject is exhausted. Conceptually option global makes
split work on the positions returned by matches/3, while it normally works on
the position returned by match/3.
Example of the difference between a scope and taking the binary apart before
splitting:
1> binary:split(<<"banana">>, [<<"a">>],[{scope,{2,3}}]).
[<<"ban">>,<<"na">>]
2> binary:split(binary:part(<<"banana">>,{2,3}), [<<"a">>],[]).
[<<"n">>,<<"n">>]
The return type is always a list of binaries that are all referencing Subject. This
means that the data in Subject is not copied to new binaries, and that Subject
cannot be garbage collected until the results of the split are no longer
referenced.
For a description of Pattern, see compile_pattern/1.