Provided by: blt-dev_2.5.3+dfsg-4_amd64 
NAME
vector - Vector data type for Tcl
SYNOPSIS
vector configure option value ...
vector create vecName ?vecName...? ?switches?
vector destroy vecName ?vecName...?
vector expr expression
vector names ?pattern...?
vector op operation vecName ?arg?...
_________________________________________________________________
DESCRIPTION
The vector command creates a vector of floating point values. The vector's components can
be manipulated in three ways: through a Tcl array variable, a Tcl command, or the C API.
INTRODUCTION
A vector is simply an ordered set of numbers. The components of a vector are real
numbers, indexed by counting numbers.
Vectors are common data structures for many applications. For example, a graph may use
two vectors to represent the X-Y coordinates of the data plotted. The graph will
automatically be redrawn when the vectors are updated or changed. By using vectors, you
can separate data analysis from the graph widget. This makes it easier, for example, to
add data transformations, such as splines. It's possible to plot the same data to in
multiple graphs, where each graph presents a different view or scale of the data.
You could try to use Tcl's associative arrays as vectors. Tcl arrays are easy to use.
You can access individual elements randomly by specifying the index, or the set the entire
array by providing a list of index and value pairs for each element. The disadvantages of
associative arrays as vectors lie in the fact they are implemented as hash tables.
• There's no implied ordering to the associative arrays. If you used vectors for
plotting, you would want to insure the second component comes after the first, an so on.
This isn't possible since arrays are actually hash tables. For example, you can't get a
range of values between two indices. Nor can you sort an array.
• Arrays consume lots of memory when the number of elements becomes large (tens of
thousands). This is because each element's index and value are stored as strings in the
hash table.
• The C programming interface is unwieldy. Normally with vectors, you would like to view
the Tcl array as you do a C array, as an array of floats or doubles. But with hash
tables, you must convert both the index and value to and from decimal strings, just to
access an element in the array. This makes it cumbersome to perform operations on the
array as a whole.
The vector command tries to overcome these disadvantages while still retaining the ease of
use of Tcl arrays. The vector command creates both a new Tcl command and associate array
which are linked to the vector components. You can randomly access vector components
though the elements of array. Not all indices are generated for the array, so printing
the array (using the parray procedure) does not print out all the component values. You
can use the Tcl command to access the array as a whole. You can copy, append, or sort
vector using its command. If you need greater performance, or customized behavior, you
can write your own C code to manage vectors.
EXAMPLE
You create vectors using the vector command and its create operation.
# Create a new vector.
vector create y(50)
This creates a new vector named y. It has fifty components, by default, initialized to
0.0. In addition, both a Tcl command and array variable, both named y, are created. You
can use either the command or variable to query or modify components of the vector.
# Set the first value.
set y(0) 9.25
puts "y has [y length] components"
The array y can be used to read or set individual components of the vector. Vector
components are indexed from zero. The array index must be a number less than the number
of components. For example, it's an error if you try to set the 51st element of y.
# This is an error. The vector only has 50 components.
set y(50) 0.02
You can also specify a range of indices using a colon (:) to separate the first and last
indices of the range.
# Set the first six components of y
set y(0:5) 25.2
If you don't include an index, then it will default to the first and/or last component of
the vector.
# Print out all the components of y
puts "y = $y(:)"
There are special non-numeric indices. The index end, specifies the last component of the
vector. It's an error to use this index if the vector is empty (length is zero). The
index ++end can be used to extend the vector by one component and initialize it to a
specific value. You can't read from the array using this index, though.
# Extend the vector by one component.
set y(++end) 0.02
The other special indices are min and max. They return the current smallest and largest
components of the vector.
# Print the bounds of the vector
puts "min=$y(min) max=$y(max)"
To delete components from a vector, simply unset the corresponding array element. In the
following example, the first component of y is deleted. All the remaining components of y
will be moved down by one index as the length of the vector is reduced by one.
# Delete the first component
unset y(0)
puts "new first element is $y(0)"
The vector's Tcl command can also be used to query or set the vector.
# Create and set the components of a new vector
vector create x
x set { 0.02 0.04 0.06 0.08 0.10 0.12 0.14 0.16 0.18 0.20 }
Here we've created a vector x without a initial length specification. In this case, the
length is zero. The set operation resets the vector, extending it and setting values for
each new component.
There are several operations for vectors. The range operation lists the components of a
vector between two indices.
# List the components
puts "x = [x range 0 end]"
You can search for a particular value using the search operation. It returns a list of
indices of the components with the same value. If no component has the same value, it
returns "".
# Find the index of the biggest component
set indices [x search $x(max)]
Other operations copy, append, or sort vectors. You can append vectors or new values onto
an existing vector with the append operation.
# Append assorted vectors and values to x
x append x2 x3 { 2.3 4.5 } x4
The sort operation sorts the vector. If any additional vectors are specified, they are
rearranged in the same order as the vector. For example, you could use it to sort data
points represented by x and y vectors.
# Sort the data points
x sort y
The vector x is sorted while the components of y are rearranged so that the original x,y
coordinate pairs are retained.
The expr operation lets you perform arithmetic on vectors. The result is stored in the
vector.
# Add the two vectors and a scalar
x expr { x + y }
x expr { x * 2 }
When a vector is modified, resized, or deleted, it may trigger call-backs to notify the
clients of the vector. For example, when a vector used in the graph widget is updated,
the vector automatically notifies the widget that it has changed. The graph can then
redrawn itself at the next idle point. By default, the notification occurs when Tk is
next idle. This way you can modify the vector many times without incurring the penalty of
the graph redrawing itself for each change. You can change this behavior using the notify
operation.
# Make vector x notify after every change
x notify always
...
# Never notify
x notify never
...
# Force notification now
x notify now
# Set Tcl callback for update of Tktable widget .t.
x notify callback {.t conf -padx [.t cget -padx]; .t reread}
To delete a vector, use the vector delete command. Both the vector and its corresponding
Tcl command are destroyed.
# Remove vector x
vector destroy x
The psuedo vector last can be used at the end of an expression to implement running
totals. During execution it resolves to the result from the previous vector element
evaluation.
vector create A(10)
vector create B(10)
vector create S(10)
vector create T(10)
S expr A+B
T expr S+last; # Running total
SYNTAX
Vectors are created using the vector create operation. Th create operation can be invoked
in one of three forms:
vector create vecName
This creates a new vector vecName which initially has no components.
vector create vecName(size)
This second form creates a new vector which will contain size number of components.
The components will be indexed starting from zero (0). The default value for the
components is 0.0.
vector create vecName(rows,columns)
This form allows creation of a matrix with the specified columns and rows*columns
elements. See the matrix section for more details.
vector create vecName(first:last)
The last form creates a new vector of indexed first through last. First and last
can be any integer value so long as first is less than last.
Vector names must start with a letter and consist of letters, digits, or underscores.
# Error: must start with letter
vector create 1abc
You can automatically generate vector names using the "#auto" vector name. The create
operation will generate a unique vector name.
set vec [vector create #auto]
puts "$vec has [$vec length] components"
VECTOR INDICES
Vectors are indexed by integers. You can access the individual vector components via its
array variable or Tcl command. The string representing the index can be an integer, a
numeric expression, a range, or a special keyword.
The index must lie within the current range of the vector, otherwise an an error message
is returned. Normally the indices of a vector are start from 0. But you can use the
offset operation to change a vector's indices on-the-fly.
puts $vecName(0)
vecName offset -5
puts $vecName(-5)
When matrix numcols is > 1, 2D indexes are supported using ROW,COL form.
vecName matrix numcols 3
puts vecName(0,2)
You can also use numeric expressions as indices. The result of the expression must be an
integer value.
set n 21
set vecName($n+3) 50.2
The following special non-numeric indices are available: min, max, end, and ++end.
puts "min = $vecName($min)"
set vecName(end) -1.2
The indices min and max will return the minimum and maximum values of the vector. Also
available are: prod, sum, and mean. The index end returns the value of the last
component in the vector. he index end,0 returns the value of the last row in column 0 of
the vector. The index ++end is used to append new value onto the vector. It
automatically extends the vector by numcols and sets its value.
# Append an new component to the end
set vecName(++end) 3.2
A range of indices can be indicated by a colon (:).
# Set the first six components to 1.0
set vecName(0:5) 1.0
If no index is supplied the first or last component is assumed.
# Print the values of all the components
puts $vecName(:)
VECTOR OPERATIONS
vector configure ? -flush bool -watchunset bool -oldcreate bool -maxsize int -novariable
bool -nocommand bool?
The configure operation sets the default options used in creating vectors: these
options are global to the interpreter. The -maxsize option, when non-zero, limits
creation size. The -oldcreate enable the creation shortcut: vector vec1 vec2 ....
See the create command for details on the others. By default, these are all
disabled or zero.
vector create vecName?(size)?... ?switches?
The create operation creates a new vector vecName. The size may be an integer, a
START:END range or ROW,COL (see matrix). This creates both a Tcl command and array
variable called vecName. The name vecName must be unique, so another Tcl command
or array variable can not already exist in the current scope. You may access the
components of the vector using the variable. If you change a value in the array,
or unset an array element, the vector is updated to reflect the changes. When the
variable vecName is unset, the vector and its Tcl command are also destroyed.
The vector has optional switches that affect how the vector is created. They are as
follows:
-variable varName
Specifies the name of a Tcl variable to be mapped to the vector. If the
variable already exists, it is first deleted, then recreated. If varName is
the empty string, then no variable will be mapped. You can always map a
variable back to the vector using the vector's variable operation.
-command cmdName
Maps a Tcl command to the vector. The vector can be accessed using cmdName
and one of the vector instance operations. A Tcl command by that name
cannot already exist. If cmdName is the empty string, no command mapping
will be made.
-watchunset boolean
Indicates that the vector should automatically delete itself if the variable
associated with the vector is unset. By default, the vector will not be
deleted. This is different from previous releases. Set boolean to "true"
to get the old behavior.
-flush boolean
Indicates that the vector should automatically flush the cached variable
elements which unsets all the elements of the Tcl array variable associated
with the vector, freeing memory associated with the variable. This includes
both the hash table and the hash keys. The down side is that this
effectively flushes the caching of vector elements in the array. This means
that the subsequent reads of the array will require a decimal to string
conversion. By default, flushing is disabled.
vector destroy vecName ?vecName...?
Destroy vectors.
vector expr expression
All binary operators take vectors as operands (remember that numbers are treated as
one-component vectors).The exact action of binary operators depends upon the length
of the second operand. If the second operand has only one component, then each
element of the first vector operand is computed by that value. For example, the
expression "x * 2" multiples all elements of the vector x by 2. If the second
operand has more than one component, both operands must be the same length. Each
pair of corresponding elements are computed. So "x + y" adds the the first
components of x and y together, the second, and so on.
The valid operators are listed below, grouped in decreasing order of precedence:
- ! Unary minus and logical NOT. The unary minus flips the sign of
each component in the vector. The logical not operator returns
a vector of whose values are 0.0 or 1.0. For each non-zero
component 1.0 is returned, 0.0 otherwise.
^ Exponentiation.
* / % Multiply, divide, remainder.
+ - Add and subtract.
<< >> Left and right shift. Circularly shifts the values of the
vector
< > <= >= Boolean less, greater, less than or equal, and greater than or
equal. Each operator returns a vector of ones and zeros. If
the condition is true, 1.0 is the component value, 0.0
otherwise.
== != Boolean equal and not equal. Each operator returns a vector of
ones and zeros. If the condition is true, 1.0 is the component
value, 0.0 otherwise.
&& Logical AND. Produces a 1 result if both operands are non-
zero, 0 otherwise.
|| Logical OR. Produces a 0 result if both operands are zero, 1
otherwise.
x?y:z If-then-else, as in C.
See the C manual for more details on the results produced by each operator. All of
the binary operators group left-to-right within the same precedence level.
Several mathematical functions are supported for vectors. Each of the following
functions invokes the math library function of the same name; see the manual
entries for the library functions for details on what they do. The operation is
applied to all elements of the vector returning the results. All functions take a
vector operand. If no vector operand is used in the call, the current vector is
assumed. eg.
vector create aVec
aVec seq 0 100
aVec expr {2*abs(aVec)-1}
aVec length 100
aVec expr {2*row()}
vector expr {2*row()} ; # ERROR!
acos cos hypot sinh
asin cosh log sqrt
atan exp log10 tan
ceil floor sin tanh
Additional functions are:
abs Returns the absolute value of each component.
random Returns a vector of non-negative values uniformly distributed between
[0.0, 1.0) using drand48. The seed comes from the internal clock of the
machine or may be set manual with the srandom function.
round Rounds each component of the vector.
srandom Initializes the random number generator using srand48. The high order
32-bits are set using the integral portion of the first vector component.
All other components are ignored. The low order 16-bits are set to an
arbitrary value.
The following functions return a single value.
adev Returns the average deviation (defined as the sum of the absolute values
of the differences between component and the mean, divided by the length
of the vector).
kurtosis Returns the degree of peakedness (fourth moment) of the vector.
length Returns the number of components in the vector.
max Returns the vector's maximum value.
mean Returns the mean value of the vector.
median Returns the median of the vector.
min Returns the vector's minimum value.
q1 Returns the first quartile of the vector.
q3 Returns the third quartile of the vector.
prod Returns the product of the components.
sdev Returns the standard deviation (defined as the square root of the
variance) of the vector.
skew Returns the skewness (or third moment) of the vector. This characterizes
the degree of asymmetry of the vector about the mean.
sum Returns the sum of the components.
var Returns the variance of the vector. The sum of the squared differences
between each component and the mean is computed. The variance is the sum
divided by the length of the vector minus 1.
This last set of functions returns a vector of the same length as the argument.
invert Returns vector with elements in reversed order.
norm Scales the values of the vector to lie in the range [0.0..1.0].
row Psuedo function to get the current row.
sort Returns the vector components sorted in ascending order.
shift(nVec,N)
This is the only function taking a second arg. It provides a version of
nvec shifted by N places. When N is a scalar or vector with only one
element, shift fills vacant area with 0. Otherwise the second element of
nVec is used for the fill value. One use for this is providing running
totals.
vector names ?pattern?
Return names of all defined vectors.
vector op operation vecName ?arg?...
Invoke instance operation. Supported operations are defined in the next section.
Op is the only way to invoke instance operation sub-commands when -command is
defined as empty in a vector. It also allows writing vector code that is checkable
by a syntax checkers. eg.
vector create v1
v1 op append {1 2 3}
v1 op modify 1 2.1
INSTANCE OPERATIONS
You can also use the vector's Tcl command to query or modify it. The general form is
vecName operation ?arg?... Note this is equivalent to the form: vector op operation
vecName ?arg?... Both operation and its arguments determine the exact behavior of the
command. The operations available for vectors are listed below.
vecName + item
vecName - item vecName * item vecName / item Perform binary op and return result as
a list.
vecName append item ?item?...
Appends the component values from item to vecName. Item can be either the name of
a vector or a list of numeric values.
vecName binread channel ?length? ?switches?
Reads binary values from a Tcl channel. Values are either appended to the end of
the vector or placed at a given index (using the -at option), overwriting existing
values. Data is read until EOF is found on the channel or a specified number of
values length are read (note that this is not necessarily the same as the number of
bytes). The following switches are supported:
-swap Swap bytes and words. The default endian is the host machine.
-at index
New values will start at vector index index. This will overwrite any
current values.
-format format
Specifies the format of the data. Format can be one of the following: "i1",
"i2", "i4", "i8", "u1, "u2", "u4", "u8", "r4", "r8", or "r16". The number
indicates the number of bytes required for each value. The letter indicates
the type: "i" for signed, "u" for unsigned, "r" or real. The default format
is "r16".
vecName binwrite channel ?length? ?-at index?
Like binread, but writes data.
vecName clear
Clears the element indices from the array variable associated with vecName. This
doesn't affect the components of the vector. By default, the number of entries in
the Tcl array doesn't match the number of components in the vector. This is
because its too expensive to maintain decimal strings for both the index and value
for each component. Instead, the index and value are saved only when you read or
write an element with a new index. This command removes the index and value
strings from the array. This is useful when the vector is large.
vecName delete index ?index?...
Deletes the indexth component from the vector vecName. Index is the index of the
element to be deleted. This is the same as unsetting the array variable element
index. The vector is compacted after all the indices have been deleted.
vecName dup destName
Copies vecName to destName. DestName is the name of a destination vector. If a
vector destName already exists, it is overwritten with the components of vecName.
Otherwise a new vector is created.
vecName expr expression
Computes the expression and resets the values of the vector accordingly. Both
scalar and vector math operations are allowed. All values in expressions are
either real numbers or names of vectors. All numbers are treated as one component
vectors.
vecName index index ?value?...
Get/set individual vector values. This provides element updating when -variable is
set to empty.
vecName insert index item ?item?...
Inserts the component values from item to vecName at index Item can be either the
name of a vector or a list of numeric values.
vecName length ?newSize?
Queries or resets the number of components in vecName. NewSize is a number
specifying the new size of the vector. If newSize is smaller than the current size
of vecName, vecName is truncated. If newSize is greater, the vector is extended
and the new components are initialized to 0.0. If no newSize argument is present,
the current length of the vector is returned.
vecName matrix ...
Matrix provides a 2D array view into 1D data. It provides indexing operations in
ROW,COL form making it suitable for use with TkTable. Data storage remains
unchanged: vectors are still just a single long array. For example, here are two
ways to create a 3 column by 10 row matrix:
vector create aVec(10,3)
vector create bVec(30)
bVec matrix numcols 3
set aVec(0,0) 99
set bVec(29,2) -99
aVec append {5 6 7}; # aVec now has 11 rows.
aVec append 1 2; # Now aVec has 13 rows!
Note that data is appended only in increments of numcols. Elements 0-2 make up the first
row, 3-5 the second, etc. Elements will appear only in increments of the column size.
vecName matrix copy dstcolumn srccolumn ?srcVec?
Copy a column of element values to column dstcolumn from srccolumn. If
vector srcVec is given, and not the same as vecName, the columns numbers
must be different. If the srcVec column is longer, vecName will be
extended. If shorter, remaining destination values are not overwritten.
vecName matrix delete column.
Delete elements in a column. Note that numcols, which must be greater than
1, will be decremented.
vecName matrix get column
Get the element in a column: this number must be less than numcols. Note
that numcols must be non-zero.
vecName matrix insert column ?initvalue? .
Insert a new column of elements at column (default 0). The new column is
initialized with initvalue, or 0.0 if not specified. Note that numcols will
be incremented.
vecName matrix multiply srcVec ?dstVec?
Perform matrix multiplication using srcVec, placing results either in
dstVec, or returned as a list. The numrows of srcVec must equal numcols in
vecName. One application for multiply is coordinate transformation.
vecName matrix numcols ?size?
Get or set the number of columns for a vectors data. Values >1 enable array
variables to accept 2d matrix indexes. For example with a numcols of 10,
$vec1(1,2) refers to the 13th element in the vector. A vectors size is also
constrained to multiples of numcols, as is it's offset. By default, numcols
is 1.
vecName matrix numrows ?size?
Get or set the length of rows in a columns for a vector. By default, this
is just the vector length/numcols. Setting this value simply provides a
convenient way to increase or decrease the vector size by multiples of
numcols.
vecName matrix set column ?valuelist?
Set value elements in a column: this number must be less than numcols.
The valuelist is a list values. If this list is shorter than the column,
it's last value is used for all remaining columns. The column gets set to
the values of item, or 0.0 by default.
vecName matrix shift column amount ?startoffset?
Shifts the values of a column by integer inamount. A negative value shifts
upward. The startoffset indicates where to start shifting from.
vecName matrix sort column ?-reverse?
Sort the vector by the given column.
vecName matrix transpose
Transpose all columns with rows in matrix. Note that this is a no-op if
numcols is 1. Otherwise, numcols will change to vectorLength/numcols.
vecName merge srcName ?srcName?...
Merges the named vectors into a single vector. The resulting vector is formed by
merging the components of each source vector one index at a time.
vecName notify ?keyword? ?script?
Queries or controls how vector clients are notified of changes to the vector. Also
allows setting a notifier callback. The exact behavior is determined by keyword.
always Indicates that clients are to be notified immediately whenever the vector is
updated.
never Indicates that no clients are to be notified.
whenidle
Indicates that clients are to be notified at the next idle point whenever
the vector is updated.
now If any client notifications is currently pending, they are notified
immediately.
cancel Cancels pending notifications of clients using the vector.
pending
Returns 1 if a client notification is pending, and 0 otherwise.
callback ?script?
Query or set a Tcl callback script that is evaluated when a vector is
updated.
vecName populate destName ?density?
Creates a vector destName which is a superset of vecName. DestName will include
all the components of vecName, in addition the interval between each of the
original components will contain a density number of new components, whose values
are evenly distributed between the original components values. This is useful for
generating abscissas to be interpolated along a spline.
vecName range firstIndex ?lastIndex?...
Returns a list of numeric values representing the vector components between two
indices. Both firstIndex and lastIndex are indices representing the range of
components to be returned. If lastIndex is less than firstIndex, the components are
listed in reverse order.
vecName search value ?value?
Searches for a value or range of values among the components of vecName. If one
value argument is given, a list of indices of the components which equal value is
returned. If a second value is also provided, then the indices of all components
which lie within the range of the two values are returned. If no components are
found, then "" is returned.
vecName set item
Resets the components of the vector to item. Item can be either a list of numeric
expressions or another vector.
vecName seq start ?finish? ?step?
Generates a sequence of values starting with the value start. Finish indicates the
terminating value of the sequence. The vector is automatically resized to contain
just the sequence. If three arguments are present, step designates the interval.
With only two arguments (no finish argument), the sequence will continue until the
vector is filled. With one argument, the interval defaults to 1.0.
vecName sort ?-reverse? ?argName?...
Sorts the vector vecName in increasing order. If the -reverse flag is present, the
vector is sorted in decreasing order. If other arguments argName are present, they
are the names of vectors which will be rearranged in the same manner as vecName.
Each vector must be the same length as vecName. You could use this to sort the x
vector of a graph, while still retaining the same x,y coordinate pairs in a y
vector.
vecName split dstName ?dstName?...
Split the vector into a multiple vectors. The resulting N vectors each contain the
mod-Nth element from source.
vecName variable varName
Maps a Tcl variable to the vector, creating another means for accessing the vector.
The variable varName can't already exist. This overrides any current variable
mapping the vector may have.
C LANGUAGE API
You can create, modify, and destroy vectors from C code, using library routines. You need
to include the header file blt.h. It contains the definition of the structure Blt_Vector,
which represents the vector. It appears below.
typedef struct {
double *valueArr;
int numValues;
int arraySize;
double min, max;
} Blt_Vector;
The field valueArr points to memory holding the vector components. The components are
stored in a double precision array, whose size size is represented by arraySize.
NumValues is the length of vector. The size of the array is always equal to or larger
than the length of the vector. Min and max are minimum and maximum component values.
LIBRARY ROUTINES
The following routines are available from C to manage vectors. Vectors are identified by
the vector name.
Blt_CreateVector
Synopsis:
int Blt_CreateVector (interp, vecName, length, vecPtrPtr)
Tcl_Interp *interp;
char *vecName;
int length;
Blt_Vector **vecPtrPtr;
Description:
Creates a new vector vecName with a length of length. Blt_CreateVector
creates both a new Tcl command and array variable vecName. Neither a command
nor variable named vecName can already exist. A pointer to the vector is
placed into vecPtrPtr.
Results: Returns TCL_OK if the vector is successfully created. If length is negative,
a Tcl variable or command vecName already exists, or memory cannot be
allocated for the vector, then TCL_ERROR is returned and interp->result will
contain an error message.
Blt_DeleteVectorByName
Synopsis:
int Blt_DeleteVectorByName (interp, vecName)
Tcl_Interp *interp;
char *vecName;
Description:
Removes the vector vecName. VecName is the name of a vector which must
already exist. Both the Tcl command and array variable vecName are destroyed.
All clients of the vector will be notified immediately that the vector has
been destroyed.
Results: Returns TCL_OK if the vector is successfully deleted. If vecName is not the
name a vector, then TCL_ERROR is returned and interp->result will contain an
error message.
Blt_DeleteVector
Synopsis:
int Blt_DeleteVector (vecPtr)
Blt_Vector *vecPtr;
Description:
Removes the vector pointed to by vecPtr. VecPtr is a pointer to a vector,
typically set by Blt_GetVector or Blt_CreateVector. Both the Tcl command and
array variable of the vector are destroyed. All clients of the vector will be
notified immediately that the vector has been destroyed.
Results: Returns TCL_OK if the vector is successfully deleted. If vecName is not the
name a vector, then TCL_ERROR is returned and interp->result will contain an
error message.
Blt_GetVector
Synopsis:
int Blt_GetVector (interp, vecName, vecPtrPtr)
Tcl_Interp *interp;
char *vecName;
Blt_Vector **vecPtrPtr;
Description:
Retrieves the vector vecName. VecName is the name of a vector which must
already exist. VecPtrPtr will point be set to the address of the vector.
Results: Returns TCL_OK if the vector is successfully retrieved. If vecName is not the
name of a vector, then TCL_ERROR is returned and interp->result will contain
an error message.
Blt_ResetVector
Synopsis:
int Blt_ResetVector (vecPtr, dataArr,
numValues, arraySize, freeProc)
Blt_Vector *vecPtr;
double *dataArr;
int *numValues;
int *arraySize;
Tcl_FreeProc *freeProc;
Description:
Resets the components of the vector pointed to by vecPtr. Calling
Blt_ResetVector will trigger the vector to dispatch notifications to its
clients. DataArr is the array of doubles which represents the vector data.
NumValues is the number of elements in the array. ArraySize is the actual size
of the array (the array may be bigger than the number of values stored in it).
FreeProc indicates how the storage for the vector component array (dataArr)
was allocated. It is used to determine how to reallocate memory when the
vector is resized or destroyed. It must be TCL_DYNAMIC, TCL_STATIC,
TCL_VOLATILE, or a pointer to a function to free the memory allocated for the
vector array. If freeProc is TCL_VOLATILE, it indicates that dataArr must be
copied and saved. If freeProc is TCL_DYNAMIC, it indicates that dataArr was
dynamically allocated and that Tcl should free dataArr if necessary. Static
indicates that nothing should be done to release storage for dataArr.
Results: Returns TCL_OK if the vector is successfully resized. If newSize is negative,
a vector vecName does not exist, or memory cannot be allocated for the vector,
then TCL_ERROR is returned and interp->result will contain an error message.
Blt_ResizeVector
Synopsis:
int Blt_ResizeVector (vecPtr, newSize)
Blt_Vector *vecPtr;
int newSize;
Description:
Resets the length of the vector pointed to by vecPtr to newSize. If newSize
is smaller than the current size of the vector, it is truncated. If newSize
is greater, the vector is extended and the new components are initialized to
0.0. Calling Blt_ResetVector will trigger the vector to dispatch
notifications.
Results: Returns TCL_OK if the vector is successfully resized. If newSize is negative
or memory can not be allocated for the vector, then TCL_ERROR is returned and
interp->result will contain an error message.
Blt_VectorExists
Synopsis:
int Blt_VectorExists (interp, vecName)
Tcl_Interp *interp;
char *vecName;
Description:
Indicates if a vector named vecName exists in interp.
Results: Returns 1 if a vector vecName exists and 0 otherwise.
If your application needs to be notified when a vector changes, it can allocate a unique
client identifier for itself. Using this identifier, you can then register a call-back
to be made whenever the vector is updated or destroyed. By default, the call-backs are
made at the next idle point. This can be changed to occur at the time the vector is
modified. An application can allocate more than one identifier for any vector. When
the client application is done with the vector, it should free the identifier.
The call-back routine must of the following type.
typedef void (Blt_VectorChangedProc) (Tcl_Interp *interp,
ClientData clientData, Blt_VectorNotify notify);
ClientData is passed to this routine whenever it is called. You can use this to pass
information to the call-back. The notify argument indicates whether the vector has been
updated of destroyed. It is an enumerated type.
typedef enum {
BLT_VECTOR_NOTIFY_UPDATE=1,
BLT_VECTOR_NOTIFY_DESTROY=2
} Blt_VectorNotify;
Blt_AllocVectorId
Synopsis:
Blt_VectorId Blt_AllocVectorId (interp, vecName)
Tcl_Interp *interp;
char *vecName;
Description:
Allocates an client identifier for with the vector vecName. This
identifier can be used to specify a call-back which is triggered when the
vector is updated or destroyed.
Results: Returns a client identifier if successful. If vecName is not the name of a
vector, then NULL is returned and interp->result will contain an error
message.
Blt_GetVectorById
Synopsis:
int Blt_GetVector (interp, clientId, vecPtrPtr)
Tcl_Interp *interp;
Blt_VectorId clientId;
Blt_Vector **vecPtrPtr;
Description:
Retrieves the vector used by clientId. ClientId is a valid vector client
identifier allocated by Blt_AllocVectorId. VecPtrPtr will point be set to
the address of the vector.
Results: Returns TCL_OK if the vector is successfully retrieved.
Blt_SetVectorChangedProc
Synopsis:
void Blt_SetVectorChangedProc (clientId, proc, clientData);
Blt_VectorId clientId;
Blt_VectorChangedProc *proc;
ClientData *clientData;
Description:
Specifies a call-back routine to be called whenever the vector associated
with clientId is updated or deleted. Proc is a pointer to call-back
routine and must be of the type Blt_VectorChangedProc. ClientData is a
one-word value to be passed to the routine when it is invoked. If proc is
NULL, then the client is not notified.
Results: The designated call-back procedure will be invoked when the vector is
updated or destroyed.
Blt_FreeVectorId
Synopsis:
void Blt_FreeVectorId (clientId);
Blt_VectorId clientId;
Description:
Frees the client identifier. Memory allocated for the identifier is
released. The client will no longer be notified when the vector is
modified.
Results: The designated call-back procedure will be no longer be invoked when the
vector is updated or destroyed.
Blt_NameOfVectorId
Synopsis:
char *Blt_NameOfVectorId (clientId);
Blt_VectorId clientId;
Description:
Retrieves the name of the vector associated with the client identifier
clientId.
Results: Returns the name of the vector associated with clientId. If clientId is
not an identifier or the vector has been destroyed, NULL is returned.
Blt_InstallIndexProc
Synopsis:
void Blt_InstallIndexProc (indexName, procPtr)
char *indexName;
Blt_VectorIndexProc *procPtr;
Description:
Registers a function to be called to retrieved the index indexName from the
vector's array variable.
typedef double Blt_VectorIndexProc(Vector *vecPtr);
The function will be passed a pointer to the vector. The function must
return a double representing the value at the index.
Results: The new index is installed into the vector.
C API EXAMPLE
The following example opens a file of binary data and stores it in an array of doubles.
The array size is computed from the size of the file. If the vector "data" exists, calling
Blt_VectorExists, Blt_GetVector is called to get the pointer to the vector. Otherwise the
routine Blt_CreateVector is called to create a new vector and returns a pointer to it.
Just like the Tcl interface, both a new Tcl command and array variable are created when a
new vector is created. It doesn't make any difference what the initial size of the vector
is since it will be reset shortly. The vector is updated when lt_ResetVector is called.
Blt_ResetVector makes the changes visible to the Tcl interface and other vector clients
(such as a graph widget).
#include <tcl.h>
#include <blt.h>
...
Blt_Vector *vecPtr;
double *newArr;
FILE *f;
struct stat statBuf;
int numBytes, numValues;
f = fopen("binary.dat", "r");
fstat(fileno(f), &statBuf);
numBytes = (int)statBuf.st_size;
/* Allocate an array big enough to hold all the data */
newArr = (double *)malloc(numBytes);
numValues = numBytes / sizeof(double);
fread((void *)newArr, numValues, sizeof(double), f);
fclose(f);
if (Blt_VectorExists(interp, "data")) {
if (Blt_GetVector(interp, "data", &vecPtr) != TCL_OK) {
return TCL_ERROR;
}
} else {
if (Blt_CreateVector(interp, "data", 0, &vecPtr) != TCL_OK) {
return TCL_ERROR;
}
}
/*
* Reset the vector. Clients will be notified when Tk is idle.
* TCL_DYNAMIC tells the vector to free the memory allocated
* if it needs to reallocate or destroy the vector.
*/
if (Blt_ResetVector(vecPtr, newArr, numValues, numValues,
TCL_DYNAMIC) != TCL_OK) {
return TCL_ERROR;
}
INCOMPATIBILITIES
In previous versions, if the array variable isn't global (i.e. local to a Tcl procedure),
the vector is automatically destroyed when the procedure returns.
proc doit {} {
# Temporary vector x
vector x(10)
set x(9) 2.0
...
}
This has changed. Variables are not automatically destroyed when their variable is unset.
You can restore the old behavior by setting the "-watchunset" switch.
KEYWORDS
vector, graph, widget