Provided by: opencl-1.2-man-doc_1.0~svn33624-1_all 
NAME
clCreateSubBuffer - Creates a new buffer object (referred to as a sub-buffer object) from
an existing buffer object.
cl_mem clCreateSubBuffer(cl_mem buffer, cl_mem_flags flags,
cl_buffer_create_type buffer_create_type,
const void *buffer_create_info, cl_int *errcode_ret);
PARAMETERS
buffer
A valid object and cannot be a sub-buffer object.
flags
A bit-field that is used to specify allocation and usage information about the
sub-buffer memory object being created and is described in the table below. If the
CL_MEM_READ_WRITE, CL_MEM_READ_ONLY or CL_MEM_WRITE_ONLY values are not specified in
flags, they are inherited from the corresponding memory access qualifers associated
with buffer. The CL_MEM_USE_HOST_PTR, CL_MEM_ALLOC_HOST_PTR and CL_MEM_COPY_HOST_PTR
values cannot be specified in flags but are inherited from the corresponding memory
access qualifiers associated with buffer. If CL_MEM_COPY_HOST_PTR is specified in the
memory access qualifier values associated with buffer it does not imply any additional
copies when the sub-buffer is created from buffer. If the CL_MEM_HOST_WRITE_ONLY,
CL_MEM_HOST_READ_ONLY or CL_MEM_HOST_NO_ACCESS values are not specified in flags, they
are inherited from the corresponding memory access qualifiers associated with buffer.
┌───────────────────────┬──────────────────────────────────┐
│cl_mem_flags │ Description │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_READ_WRITE │ This flag specifies that the │
│ │ memory object will be read and │
│ │ written by a kernel. This is the │
│ │ default. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_WRITE_ONLY │ This flags specifies that the │
│ │ memory object will be written │
│ │ but not read by a kernel. │
│ │ │
│ │ Reading from a buffer or image │
│ │ object created with │
│ │ CL_MEM_WRITE_ONLY inside a │
│ │ kernel is undefined. │
│ │ │
│ │ CL_MEM_READ_WRITE and │
│ │ CL_MEM_WRITE_ONLY are mutually │
│ │ exclusive. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_READ_ONLY │ This flag specifies that the │
│ │ memory object is a read-only │
│ │ memory object when used inside a │
│ │ kernel. │
│ │ │
│ │ Writing to a buffer or image │
│ │ object created with │
│ │ CL_MEM_READ_ONLY inside a kernel │
│ │ is undefined. │
│ │ │
│ │ CL_MEM_READ_WRITE or │
│ │ CL_MEM_WRITE_ONLY and │
│ │ CL_MEM_READ_ONLY are mutually │
│ │ exclusive. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_USE_HOST_PTR │ This flag is valid only if │
│ │ host_ptr is not NULL. If │
│ │ specified, it indicates that the │
│ │ application wants the OpenCL │
│ │ implementation to use memory │
│ │ referenced by host_ptr as the │
│ │ storage bits for the memory │
│ │ object. │
│ │ │
│ │ OpenCL implementations are │
│ │ allowed to cache the buffer │
│ │ contents pointed to by host_ptr │
│ │ in device memory. This cached │
│ │ copy can be used when kernels │
│ │ are executed on a device. │
│ │ │
│ │ The result of OpenCL commands │
│ │ that operate on multiple buffer │
│ │ objects created with the same │
│ │ host_ptr or overlapping host │
│ │ regions is considered to be │
│ │ undefined. │
│ │ │
│ │ Refer to the dataTypes(3clc) for │
│ │ host_ptr for memory objects │
│ │ (buffer and images) created │
│ │ using CL_MEM_USE_HOST_PTR. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_ALLOC_HOST_PTR │ This flag specifies that the │
│ │ application wants the OpenCL │
│ │ implementation to allocate │
│ │ memory from host accessible │
│ │ memory. │
│ │ │
│ │ CL_MEM_ALLOC_HOST_PTR and │
│ │ CL_MEM_USE_HOST_PTR are mutually │
│ │ exclusive. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_COPY_HOST_PTR │ This flag is valid only if │
│ │ host_ptr is not NULL. If │
│ │ specified, it indicates that the │
│ │ application wants the OpenCL │
│ │ implementation to allocate │
│ │ memory for the memory object and │
│ │ copy the data from memory │
│ │ referenced by host_ptr. │
│ │ │
│ │ CL_MEM_COPY_HOST_PTR and │
│ │ CL_MEM_USE_HOST_PTR are mutually │
│ │ exclusive. │
│ │ │
│ │ CL_MEM_COPY_HOST_PTR can be used │
│ │ with CL_MEM_ALLOC_HOST_PTR to │
│ │ initialize the contents of the │
│ │ cl_mem object allocated using │
│ │ host-accessible (e.g. PCIe) │
│ │ memory. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_HOST_WRITE_ONLY │ This flag specifies that the │
│ │ host will only write to the │
│ │ memory object (using OpenCL APIs │
│ │ that enqueue a write or a map │
│ │ for write). This can be used to │
│ │ optimize write access from the │
│ │ host (e.g. enable write combined │
│ │ allocations for memory objects │
│ │ for devices that communicate │
│ │ with the host over a system bus │
│ │ such as PCIe). │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_HOST_READ_ONLY │ This flag specifies that the │
│ │ host will only read the memory │
│ │ object (using OpenCL APIs that │
│ │ enqueue a read or a map for │
│ │ read). │
│ │ │
│ │ CL_MEM_HOST_WRITE_ONLY and │
│ │ CL_MEM_HOST_READ_ONLY are │
│ │ mutually exclusive. │
├───────────────────────┼──────────────────────────────────┤
│CL_MEM_HOST_NO_ACCESS │ This flag specifies that the │
│ │ host will not read or write the │
│ │ memory object. │
│ │ │
│ │ CL_MEM_HOST_WRITE_ONLY or │
│ │ CL_MEM_HOST_READ_ONLY and │
│ │ CL_MEM_HOST_NO_ACCESS are │
│ │ mutually exclusive. │
└───────────────────────┴──────────────────────────────────┘
buffer_create_type and buffer_create_info
Describes the type of buffer object to be created. The list of supported values for
buffer_create_type and corresponding descriptor that buffer_create_info points to is
described below.
┌─────────────────────────────┬───────────────────────────────────────────────────┐
│cl_buffer_create_type │ Description │
├─────────────────────────────┼───────────────────────────────────────────────────┤
│CL_BUFFER_CREATE_TYPE_REGION │ Create a buffer object that │
│ │ represents a specific region in │
│ │ buffer. │
│ │ │
│ │ buffer_create_info is a pointer │
│ │ to the following structure: │
│ │ │
│ │ │
│ │ typedef struct _cl_buffer_region { │
│ │ size_t origin; │
│ │ size_t size; │
│ │ } cl_buffer_region; │
│ │ │
│ │ │
│ │ (origin, size) │
│ │ defines the offset │
│ │ and size in bytes in │
│ │ buffer. │
│ │ │
│ │ If buffer is created │
│ │ with │
│ │ CL_MEM_USE_HOST_PTR, │
│ │ the host_ptr │
│ │ associated with the │
│ │ buffer object │
│ │ returned is host_ptr │
│ │ + origin. │
│ │ │
│ │ The buffer object │
│ │ returned references │
│ │ the data store │
│ │ allocated for buffer │
│ │ and points to a │
│ │ specific region given │
│ │ by (origin, size) in │
│ │ this data store. │
│ │ │
│ │ CL_INVALID_VALUE is │
│ │ returned in │
│ │ errcode_ret if the │
│ │ region specified by │
│ │ (origin, size) is out │
│ │ of bounds in buffer. │
│ │ │
│ │ CL_INVALID_BUFFER_SIZE │
│ │ if size is 0. │
│ │ │
│ │ CL_MISALIGNED_SUB_BUFFER_OFFSET │
│ │ is returned in │
│ │ errcode_ret if there │
│ │ are no devices in │
│ │ context associated │
│ │ with buffer for which │
│ │ the origin value is │
│ │ aligned to the │
│ │ CL_DEVICE_MEM_BASE_ADDR_ALIGN │
│ │ value. │
└─────────────────────────────┴───────────────────────────────────────────────────┘
NOTES
Concurrent reading from, writing to and copying between both a buffer object and its
sub-buffer object(s) is undefined. Concurrent reading from, writing to and copying between
overlapping sub-buffer objects created with the same buffer object is undefined. Only
reading from both a buffer object and its sub-buffer objects or reading from multiple
overlapping sub-buffer objects is defined.
ERRORS
Returns a valid non-zero buffer object and errcode_ret is set to CL_SUCCESS if the buffer
object is created successfully. Otherwise, it returns one of the following error in
errcode_ret:
• CL_INVALID_MEM_OBJECT if buffer is not a valid buffer object or is a sub-buffer
object.
• CL_INVALID_VALUE if buffer was created with CL_MEM_WRITE_ONLY and flags specifies
CL_MEM_READ_WRITE or CL_MEM_READ_ONLY, or if buffer was created with CL_MEM_READ_ONLY
and flags specifies CL_MEM_READ_WRITE or CL_MEM_WRITE_ONLY, or if flags specifies
CL_MEM_USE_HOST_PTR or CL_MEM_ALLOC_HOST_PTR or CL_MEM_COPY_HOST_PTR.
• CL_INVALID_VALUE if buffer was created with CL_MEM_HOST_WRITE_ONLY and flags specifies
CL_MEM_HOST_READ_ONLY or if buffer was created with CL_MEM_HOST_READ_ONLY and flags
specifies CL_MEM_HOST_WRITE_ONLY, or if buffer was created with CL_MEM_HOST_NO_ACCESS
and flags specifies CL_MEM_HOST_READ_ONLY or CL_MEM_HOST_WRITE_ONLY.
• CL_INVALID_VALUE if value specified in buffer_create_type is not valid.
• CL_INVALID_VALUE if value(s) specified in buffer_create_info (for a given
buffer_create_type) is not valid or if buffer_create_info is NULL.
• CL_INVALID_BUFFER_SIZE if size is 0.
• CL_MEM_OBJECT_ALLOCATION_FAILURE if there is a failure to allocate memory for
sub-buffer object.
• CL_OUT_OF_RESOURCES if there is a failure to allocate resources required by the OpenCL
implementation on the device.
• CL_OUT_OF_HOST_MEMORY if there is a failure to allocate resources required by the
OpenCL implementation on the host.
SPECIFICATION
OpenCL Specification[1]
SEE ALSO
clCreateBuffer(3clc), clEnqueueReadBuffer(3clc), clEnqueueWriteBuffer(3clc),
clEnqueueCopyBuffer(3clc)
AUTHORS
The Khronos Group
COPYRIGHT
Copyright © 2007-2011 The Khronos Group Inc.
Permission is hereby granted, free of charge, to any person obtaining a copy of this
software and/or associated documentation files (the "Materials"), to deal in the Materials
without restriction, including without limitation the rights to use, copy, modify, merge,
publish, distribute, sublicense, and/or sell copies of the Materials, and to permit
persons to whom the Materials are furnished to do so, subject to the condition that this
copyright notice and permission notice shall be included in all copies or substantial
portions of the Materials.
NOTES
1. OpenCL Specification
page 69, section 5.2.1 - Creating Buffer Objects