Provided by: erlang-manpages_20.2.2+dfsg-1ubuntu2_all 
NAME
ets - Built-in term storage.
DESCRIPTION
This module is an interface to the Erlang built-in term storage BIFs. These provide the
ability to store very large quantities of data in an Erlang runtime system, and to have
constant access time to the data. (In the case of ordered_set, see below, access time is
proportional to the logarithm of the number of stored objects.)
Data is organized as a set of dynamic tables, which can store tuples. Each table is
created by a process. When the process terminates, the table is automatically destroyed.
Every table has access rights set at creation.
Tables are divided into four different types, set, ordered_set, bag, and duplicate_bag. A
set or ordered_set table can only have one object associated with each key. A bag or
duplicate_bag table can have many objects associated with each key.
Note:
The number of tables stored at one Erlang node used to be limited. This is no longer the
case (except by memory usage). The previous default limit was about 1400 tables and could
be increased by setting the environment variable ERL_MAX_ETS_TABLES before starting the
Erlang runtime system. This hard limit has been removed, but it is currently useful to set
the ERL_MAX_ETS_TABLES anyway. It should be set to an approximate of the maximum amount of
tables used. This since an internal table for named tables is sized using this value. If
large amounts of named tables are used and ERL_MAX_ETS_TABLES hasn't been increased, the
performance of named table lookup will degrade.
Notice that there is no automatic garbage collection for tables. Even if there are no
references to a table from any process, it is not automatically destroyed unless the owner
process terminates. To destroy a table explicitly, use function delete/1. The default
owner is the process that created the table. To transfer table ownership at process
termination, use option heir or call give_away/3.
Some implementation details:
* In the current implementation, every object insert and look-up operation results in a
copy of the object.
* '$end_of_table' is not to be used as a key, as this atom is used to mark the end of
the table when using functions first/1 and next/2.
Notice the subtle difference between matching and comparing equal, which is demonstrated
by table types set and ordered_set:
* Two Erlang terms match if they are of the same type and have the same value, so that 1
matches 1, but not 1.0 (as 1.0 is a float() and not an integer()).
* Two Erlang terms compare equal if they either are of the same type and value, or if
both are numeric types and extend to the same value, so that 1 compares equal to both
1 and 1.0.
* The ordered_set works on the Erlang term order and no defined order exists between an
integer() and a float() that extends to the same value. Hence the key 1 and the key
1.0 are regarded as equal in an ordered_set table.
FAILURE
The functions in this module exits with reason badarg if any argument has the wrong
format, if the table identifier is invalid, or if the operation is denied because of table
access rights (protected or private).
CONCURRENCY
This module provides some limited support for concurrent access. All updates to single
objects are guaranteed to be both atomic and isolated. This means that an updating
operation to a single object either succeeds or fails completely without any effect
(atomicity) and that no intermediate results of the update can be seen by other processes
(isolation). Some functions that update many objects state that they even guarantee
atomicity and isolation for the entire operation. In database terms the isolation level
can be seen as "serializable", as if all isolated operations are carried out serially, one
after the other in a strict order.
No other support is available within this module that would guarantee consistency between
objects. However, function safe_fixtable/2 can be used to guarantee that a sequence of
first/1 and next/2 calls traverse the table without errors and that each existing object
in the table is visited exactly once, even if another (or the same) process simultaneously
deletes or inserts objects into the table. Nothing else is guaranteed; in particular
objects that are inserted or deleted during such a traversal can be visited once or not at
all. Functions that internally traverse over a table, like select and match, give the same
guarantee as safe_fixtable.
MATCH SPECIFICATIONS
Some of the functions use a match specification, match_spec. For a brief explanation, see
select/2. For a detailed description, see section Match Specifications in Erlang in ERTS
User's Guide.
DATA TYPES
access() = public | protected | private
continuation()
Opaque continuation used by select/1,3, select_reverse/1,3, match/1,3, and
match_object/1,3.
match_spec() = [{match_pattern(), [term()], [term()]}]
A match specification, see above.
comp_match_spec()
A compiled match specification.
match_pattern() = atom() | tuple()
tab() = atom() | tid()
tid()
A table identifier, as returned by new/2.
type() = set | ordered_set | bag | duplicate_bag
EXPORTS
all() -> [Tab]
Types:
Tab = tab()
Returns a list of all tables at the node. Named tables are specified by their
names, unnamed tables are specified by their table identifiers.
There is no guarantee of consistency in the returned list. Tables created or
deleted by other processes "during" the ets:all() call either are or are not
included in the list. Only tables created/deleted before ets:all() is called are
guaranteed to be included/excluded.
delete(Tab) -> true
Types:
Tab = tab()
Deletes the entire table Tab.
delete(Tab, Key) -> true
Types:
Tab = tab()
Key = term()
Deletes all objects with key Key from table Tab.
delete_all_objects(Tab) -> true
Types:
Tab = tab()
Delete all objects in the ETS table Tab. The operation is guaranteed to be atomic
and isolated.
delete_object(Tab, Object) -> true
Types:
Tab = tab()
Object = tuple()
Delete the exact object Object from the ETS table, leaving objects with the same
key but other differences (useful for type bag). In a duplicate_bag table, all
instances of the object are deleted.
file2tab(Filename) -> {ok, Tab} | {error, Reason}
Types:
Filename = file:name()
Tab = tab()
Reason = term()
Reads a file produced by tab2file/2 or tab2file/3 and creates the corresponding
table Tab.
Equivalent to file2tab(Filename, []).
file2tab(Filename, Options) -> {ok, Tab} | {error, Reason}
Types:
Filename = file:name()
Tab = tab()
Options = [Option]
Option = {verify, boolean()}
Reason = term()
Reads a file produced by tab2file/2 or tab2file/3 and creates the corresponding
table Tab.
The only supported option is {verify,boolean()}. If verification is turned on (by
specifying {verify,true}), the function uses whatever information is present in the
file to assert that the information is not damaged. How this is done depends on
which extended_info was written using tab2file/3.
If no extended_info is present in the file and {verify,true} is specified, the
number of objects written is compared to the size of the original table when the
dump was started. This can make verification fail if the table was public and
objects were added or removed while the table was dumped to file. To avoid this
problem, either do not verify files dumped while updated simultaneously or use
option {extended_info, [object_count]} to tab2file/3, which extends the information
in the file with the number of objects written.
If verification is turned on and the file was written with option {extended_info,
[md5sum]}, reading the file is slower and consumes radically more CPU time than
otherwise.
{verify,false} is the default.
first(Tab) -> Key | '$end_of_table'
Types:
Tab = tab()
Key = term()
Returns the first key Key in table Tab. For an ordered_set table, the first key in
Erlang term order is returned. For other table types, the first key according to
the internal order of the table is returned. If the table is empty, '$end_of_table'
is returned.
To find subsequent keys in the table, use next/2.
foldl(Function, Acc0, Tab) -> Acc1
Types:
Function = fun((Element :: term(), AccIn) -> AccOut)
Tab = tab()
Acc0 = Acc1 = AccIn = AccOut = term()
Acc0 is returned if the table is empty. This function is similar to lists:foldl/3.
The table elements are traversed in an unspecified order, except for ordered_set
tables, where they are traversed first to last.
If Function inserts objects into the table, or another process inserts objects into
the table, those objects can (depending on key ordering) be included in the
traversal.
foldr(Function, Acc0, Tab) -> Acc1
Types:
Function = fun((Element :: term(), AccIn) -> AccOut)
Tab = tab()
Acc0 = Acc1 = AccIn = AccOut = term()
Acc0 is returned if the table is empty. This function is similar to lists:foldr/3.
The table elements are traversed in an unspecified order, except for ordered_set
tables, where they are traversed last to first.
If Function inserts objects into the table, or another process inserts objects into
the table, those objects can (depending on key ordering) be included in the
traversal.
from_dets(Tab, DetsTab) -> true
Types:
Tab = tab()
DetsTab = dets:tab_name()
Fills an already created ETS table with the objects in the already opened Dets
table DetsTab. Existing objects in the ETS table are kept unless overwritten.
If any of the tables does not exist or the Dets table is not open, a badarg
exception is raised.
fun2ms(LiteralFun) -> MatchSpec
Types:
LiteralFun = function()
MatchSpec = match_spec()
Pseudo function that by a parse_transform translates LiteralFun typed as parameter
in the function call to a match specification. With "literal" is meant that the fun
must textually be written as the parameter of the function, it cannot be held in a
variable that in turn is passed to the function.
The parse transform is provided in the ms_transform module and the source must
include file ms_transform.hrl in STDLIB for this pseudo function to work. Failing
to include the hrl file in the source results in a runtime error, not a compile
time error. The include file is easiest included by adding line
-include_lib("stdlib/include/ms_transform.hrl"). to the source file.
The fun is very restricted, it can take only a single parameter (the object to
match): a sole variable or a tuple. It must use the is_ guard tests. Language
constructs that have no representation in a match specification (if, case, receive,
and so on) are not allowed.
The return value is the resulting match specification.
Example:
1> ets:fun2ms(fun({M,N}) when N > 3 -> M end).
[{{'$1','$2'},[{'>','$2',3}],['$1']}]
Variables from the environment can be imported, so that the following works:
2> X=3.
3
3> ets:fun2ms(fun({M,N}) when N > X -> M end).
[{{'$1','$2'},[{'>','$2',{const,3}}],['$1']}]
The imported variables are replaced by match specification const expressions, which
is consistent with the static scoping for Erlang funs. However, local or global
function calls cannot be in the guard or body of the fun. Calls to built-in match
specification functions is of course allowed:
4> ets:fun2ms(fun({M,N}) when N > X, my_fun(M) -> M end).
Error: fun containing local Erlang function calls
('my_fun' called in guard) cannot be translated into match_spec
{error,transform_error}
5> ets:fun2ms(fun({M,N}) when N > X, is_atom(M) -> M end).
[{{'$1','$2'},[{'>','$2',{const,3}},{is_atom,'$1'}],['$1']}]
As shown by the example, the function can be called from the shell also. The fun
must be literally in the call when used from the shell as well.
Warning:
If the parse_transform is not applied to a module that calls this pseudo function,
the call fails in runtime (with a badarg). The ets module exports a function with
this name, but it is never to be called except when using the function in the
shell. If the parse_transform is properly applied by including header file
ms_transform.hrl, compiled code never calls the function, but the function call is
replaced by a literal match specification.
For more information, see ms_transform(3erl).
give_away(Tab, Pid, GiftData) -> true
Types:
Tab = tab()
Pid = pid()
GiftData = term()
Make process Pid the new owner of table Tab. If successful, message {'ETS-
TRANSFER',Tab,FromPid,GiftData} is sent to the new owner.
The process Pid must be alive, local, and not already the owner of the table. The
calling process must be the table owner.
Notice that this function does not affect option heir of the table. A table owner
can, for example, set heir to itself, give the table away, and then get it back if
the receiver terminates.
i() -> ok
Displays information about all ETS tables on a terminal.
i(Tab) -> ok
Types:
Tab = tab()
Browses table Tab on a terminal.
info(Tab) -> InfoList | undefined
Types:
Tab = tab()
InfoList = [InfoTuple]
InfoTuple =
{compressed, boolean()} |
{heir, pid() | none} |
{keypos, integer() >= 1} |
{memory, integer() >= 0} |
{name, atom()} |
{named_table, boolean()} |
{node, node()} |
{owner, pid()} |
{protection, access()} |
{size, integer() >= 0} |
{type, type()} |
{write_concurrency, boolean()} |
{read_concurrency, boolean()}
Returns information about table Tab as a list of tuples. If Tab has the correct
type for a table identifier, but does not refer to an existing ETS table, undefined
is returned. If Tab is not of the correct type, a badarg exception is raised.
{compressed, boolean()}:
Indicates if the table is compressed.
{heir, pid() | none}:
The pid of the heir of the table, or none if no heir is set.
{keypos, integer() >= 1}:
The key position.
{memory, integer() >= 0:
The number of words allocated to the table.
{name, atom()}:
The table name.
{named_table, boolean()}:
Indicates if the table is named.
{node, node()}:
The node where the table is stored. This field is no longer meaningful, as
tables cannot be accessed from other nodes.
{owner, pid()}:
The pid of the owner of the table.
{protection,access()}:
The table access rights.
{size, integer() >= 0:
The number of objects inserted in the table.
{type,type()}:
The table type.
{read_concurrency, boolean()}:
Indicates whether the table uses read_concurrency or not.
{write_concurrency, boolean()}:
Indicates whether the table uses write_concurrency.
info(Tab, Item) -> Value | undefined
Types:
Tab = tab()
Item =
compressed |
fixed |
heir |
keypos |
memory |
name |
named_table |
node |
owner |
protection |
safe_fixed |
safe_fixed_monotonic_time |
size |
stats |
type |
write_concurrency |
read_concurrency
Value = term()
Returns the information associated with Item for table Tab, or returns undefined if
Tab does not refer an existing ETS table. If Tab is not of the correct type, or if
Item is not one of the allowed values, a badarg exception is raised.
In addition to the {Item,Value} pairs defined for info/1, the following items are
allowed:
* Item=fixed, Value=boolean()
Indicates if the table is fixed by any process.
*
Item=safe_fixed|safe_fixed_monotonic_time, Value={FixationTime,Info}|false
If the table has been fixed using safe_fixtable/2, the call returns a tuple
where FixationTime is the time when the table was first fixed by a process,
which either is or is not one of the processes it is fixed by now.
The format and value of FixationTime depends on Item:
safe_fixed:
FixationTime corresponds to the result returned by erlang:timestamp/0 at the
time of fixation. Notice that when the system uses single or multi time warp
modes this can produce strange results, as the use of safe_fixed is not time
warp safe. Time warp safe code must use safe_fixed_monotonic_time instead.
safe_fixed_monotonic_time:
FixationTime corresponds to the result returned by erlang:monotonic_time/0 at
the time of fixation. The use of safe_fixed_monotonic_time is time warp
safe.
Info is a possibly empty lists of tuples {Pid,RefCount}, one tuple for every
process the table is fixed by now. RefCount is the value of the reference
counter and it keeps track of how many times the table has been fixed by the
process.
If the table never has been fixed, the call returns false.
* Item=stats, Value=tuple()
Returns internal statistics about set, bag, and duplicate_bag tables on an
internal format used by OTP test suites. Not for production use.
init_table(Tab, InitFun) -> true
Types:
Tab = tab()
InitFun = fun((Arg) -> Res)
Arg = read | close
Res = end_of_input | {Objects :: [term()], InitFun} | term()
Replaces the existing objects of table Tab with objects created by calling the
input function InitFun, see below. This function is provided for compatibility with
the dets module, it is not more efficient than filling a table by using insert/2.
When called with argument read, the function InitFun is assumed to return
end_of_input when there is no more input, or {Objects, Fun}, where Objects is a
list of objects and Fun is a new input function. Any other value Value is returned
as an error {error, {init_fun, Value}}. Each input function is called exactly once,
and if an error occur, the last function is called with argument close, the reply
of which is ignored.
If the table type is set and more than one object exists with a given key, one of
the objects is chosen. This is not necessarily the last object with the given key
in the sequence of objects returned by the input functions. This holds also for
duplicated objects stored in tables of type bag.
insert(Tab, ObjectOrObjects) -> true
Types:
Tab = tab()
ObjectOrObjects = tuple() | [tuple()]
Inserts the object or all of the objects in list ObjectOrObjects into table Tab.
* If the table type is set and the key of the inserted objects matches the key of
any object in the table, the old object is replaced.
* If the table type is ordered_set and the key of the inserted object compares
equal to the key of any object in the table, the old object is replaced.
* If the list contains more than one object with matching keys and the table type
is set, one is inserted, which one is not defined. The same holds for table
type ordered_set if the keys compare equal.
The entire operation is guaranteed to be atomic and isolated, even when a list of
objects is inserted.
insert_new(Tab, ObjectOrObjects) -> boolean()
Types:
Tab = tab()
ObjectOrObjects = tuple() | [tuple()]
Same as insert/2 except that instead of overwriting objects with the same key (for
set or ordered_set) or adding more objects with keys already existing in the table
(for bag and duplicate_bag), false is returned.
If ObjectOrObjects is a list, the function checks every key before inserting
anything. Nothing is inserted unless all keys present in the list are absent from
the table. Like insert/2, the entire operation is guaranteed to be atomic and
isolated.
is_compiled_ms(Term) -> boolean()
Types:
Term = term()
Checks if a term is a valid compiled match specification. The compiled match
specification is an opaque datatype that cannot be sent between Erlang nodes or be
stored on disk. Any attempt to create an external representation of a compiled
match specification results in an empty binary (<<>>).
Examples:
The following expression yields true::
ets:is_compiled_ms(ets:match_spec_compile([{'_',[],[true]}])).
The following expressions yield false, as variable Broken contains a compiled match
specification that has passed through external representation:
MS = ets:match_spec_compile([{'_',[],[true]}]),
Broken = binary_to_term(term_to_binary(MS)),
ets:is_compiled_ms(Broken).
Note:
The reason for not having an external representation of compiled match
specifications is performance. It can be subject to change in future releases,
while this interface remains for backward compatibility.
last(Tab) -> Key | '$end_of_table'
Types:
Tab = tab()
Key = term()
Returns the last key Key according to Erlang term order in table Tab of type
ordered_set. For other table types, the function is synonymous to first/1. If the
table is empty, '$end_of_table' is returned.
To find preceding keys in the table, use prev/2.
lookup(Tab, Key) -> [Object]
Types:
Tab = tab()
Key = term()
Object = tuple()
Returns a list of all objects with key Key in table Tab.
* For tables of type set, bag, or duplicate_bag, an object is returned only if
the specified key matches the key of the object in the table.
* For tables of type ordered_set, an object is returned if the specified key
compares equal to the key of an object in the table.
The difference is the same as between =:= and ==.
As an example, one can insert an object with integer() 1 as a key in an ordered_set
and get the object returned as a result of doing a lookup/2 with float() 1.0 as the
key to search for.
For tables of type set or ordered_set, the function returns either the empty list
or a list with one element, as there cannot be more than one object with the same
key. For tables of type bag or duplicate_bag, the function returns a list of
arbitrary length.
Notice that the time order of object insertions is preserved; the first object
inserted with the specified key is the first in the resulting list, and so on.
Insert and lookup times in tables of type set, bag, and duplicate_bag are constant,
regardless of the table size. For the ordered_set datatype, time is proportional to
the (binary) logarithm of the number of objects.
lookup_element(Tab, Key, Pos) -> Elem
Types:
Tab = tab()
Key = term()
Pos = integer() >= 1
Elem = term() | [term()]
For a table Tab of type set or ordered_set, the function returns the Pos:th element
of the object with key Key.
For tables of type bag or duplicate_bag, the functions returns a list with the
Pos:th element of every object with key Key.
If no object with key Key exists, the function exits with reason badarg.
The difference between set, bag, and duplicate_bag on one hand, and ordered_set on
the other, regarding the fact that ordered_set view keys as equal when they compare
equal whereas the other table types regard them equal only when they match, holds
for lookup_element/3.
match(Continuation) -> {[Match], Continuation} | '$end_of_table'
Types:
Match = [term()]
Continuation = continuation()
Continues a match started with match/3. The next chunk of the size specified in the
initial match/3 call is returned together with a new Continuation, which can be
used in subsequent calls to this function.
When there are no more objects in the table, '$end_of_table' is returned.
match(Tab, Pattern) -> [Match]
Types:
Tab = tab()
Pattern = match_pattern()
Match = [term()]
Matches the objects in table Tab against pattern Pattern.
A pattern is a term that can contain:
* Bound parts (Erlang terms)
* '_' that matches any Erlang term
* Pattern variables '$N', where N=0,1,...
The function returns a list with one element for each matching object, where each
element is an ordered list of pattern variable bindings, for example:
6> ets:match(T, '$1'). % Matches every object in table
[[{rufsen,dog,7}],[{brunte,horse,5}],[{ludde,dog,5}]]
7> ets:match(T, {'_',dog,'$1'}).
[[7],[5]]
8> ets:match(T, {'_',cow,'$1'}).
[]
If the key is specified in the pattern, the match is very efficient. If the key is
not specified, that is, if it is a variable or an underscore, the entire table must
be searched. The search time can be substantial if the table is very large.
For tables of type ordered_set, the result is in the same order as in a first/next
traversal.
match(Tab, Pattern, Limit) ->
{[Match], Continuation} | '$end_of_table'
Types:
Tab = tab()
Pattern = match_pattern()
Limit = integer() >= 1
Match = [term()]
Continuation = continuation()
Works like match/2, but returns only a limited (Limit) number of matching objects.
Term Continuation can then be used in subsequent calls to match/1 to get the next
chunk of matching objects. This is a space-efficient way to work on objects in a
table, which is faster than traversing the table object by object using first/1 and
next/2.
If the table is empty, '$end_of_table' is returned.
match_delete(Tab, Pattern) -> true
Types:
Tab = tab()
Pattern = match_pattern()
Deletes all objects that match pattern Pattern from table Tab. For a description of
patterns, see match/2.
match_object(Continuation) ->
{[Object], Continuation} | '$end_of_table'
Types:
Object = tuple()
Continuation = continuation()
Continues a match started with match_object/3. The next chunk of the size specified
in the initial match_object/3 call is returned together with a new Continuation,
which can be used in subsequent calls to this function.
When there are no more objects in the table, '$end_of_table' is returned.
match_object(Tab, Pattern) -> [Object]
Types:
Tab = tab()
Pattern = match_pattern()
Object = tuple()
Matches the objects in table Tab against pattern Pattern. For a description of
patterns, see match/2. The function returns a list of all objects that match the
pattern.
If the key is specified in the pattern, the match is very efficient. If the key is
not specified, that is, if it is a variable or an underscore, the entire table must
be searched. The search time can be substantial if the table is very large.
For tables of type ordered_set, the result is in the same order as in a first/next
traversal.
match_object(Tab, Pattern, Limit) ->
{[Object], Continuation} | '$end_of_table'
Types:
Tab = tab()
Pattern = match_pattern()
Limit = integer() >= 1
Object = tuple()
Continuation = continuation()
Works like match_object/2, but only returns a limited (Limit) number of matching
objects. Term Continuation can then be used in subsequent calls to match_object/1
to get the next chunk of matching objects. This is a space-efficient way to work on
objects in a table, which is faster than traversing the table object by object
using first/1 and next/2.
If the table is empty, '$end_of_table' is returned.
match_spec_compile(MatchSpec) -> CompiledMatchSpec
Types:
MatchSpec = match_spec()
CompiledMatchSpec = comp_match_spec()
Transforms a match specification into an internal representation that can be used
in subsequent calls to match_spec_run/2. The internal representation is opaque and
cannot be converted to external term format and then back again without losing its
properties (that is, it cannot be sent to a process on another node and still
remain a valid compiled match specification, nor can it be stored on disk). To
check the validity of a compiled match specification, use is_compiled_ms/1.
If term MatchSpec cannot be compiled (does not represent a valid match
specification), a badarg exception is raised.
Note:
This function has limited use in normal code. It is used by the dets module to
perform the dets:select() operations.
match_spec_run(List, CompiledMatchSpec) -> list()
Types:
List = [tuple()]
CompiledMatchSpec = comp_match_spec()
Executes the matching specified in a compiled match specification on a list of
tuples. Term CompiledMatchSpec is to be the result of a call to
match_spec_compile/1 and is hence the internal representation of the match
specification one wants to use.
The matching is executed on each element in List and the function returns a list
containing all results. If an element in List does not match, nothing is returned
for that element. The length of the result list is therefore equal or less than the
length of parameter List.
Example:
The following two calls give the same result (but certainly not the same execution
time):
Table = ets:new...
MatchSpec = ...
% The following call...
ets:match_spec_run(ets:tab2list(Table),
ets:match_spec_compile(MatchSpec)),
% ...gives the same result as the more common (and more efficient)
ets:select(Table, MatchSpec),
Note:
This function has limited use in normal code. It is used by the dets module to
perform the dets:select() operations and by Mnesia during transactions.
member(Tab, Key) -> boolean()
Types:
Tab = tab()
Key = term()
Works like lookup/2, but does not return the objects. Returns true if one or more
elements in the table has key Key, otherwise false.
new(Name, Options) -> tid() | atom()
Types:
Name = atom()
Options = [Option]
Option =
Type |
Access |
named_table |
{keypos, Pos} |
{heir, Pid :: pid(), HeirData} |
{heir, none} |
Tweaks
Type = type()
Access = access()
Tweaks =
{write_concurrency, boolean()} |
{read_concurrency, boolean()} |
compressed
Pos = integer() >= 1
HeirData = term()
Creates a new table and returns a table identifier that can be used in subsequent
operations. The table identifier can be sent to other processes so that a table can
be shared between different processes within a node.
Parameter Options is a list of atoms that specifies table type, access rights, key
position, and whether the table is named. Default values are used for omitted
options. This means that not specifying any options ([]) is the same as specifying
[set, protected, {keypos,1}, {heir,none}, {write_concurrency,false},
{read_concurrency,false}].
set:
The table is a set table: one key, one object, no order among objects. This is
the default table type.
ordered_set:
The table is a ordered_set table: one key, one object, ordered in Erlang term
order, which is the order implied by the < and > operators. Tables of this type
have a somewhat different behavior in some situations than tables of other
types. Most notably, the ordered_set tables regard keys as equal when they
compare equal, not only when they match. This means that to an ordered_set
table, integer() 1 and float() 1.0 are regarded as equal. This also means that
the key used to lookup an element not necessarily matches the key in the
returned elements, if float()'s and integer()'s are mixed in keys of a table.
bag:
The table is a bag table, which can have many objects, but only one instance of
each object, per key.
duplicate_bag:
The table is a duplicate_bag table, which can have many objects, including
multiple copies of the same object, per key.
public:
Any process can read or write to the table.
protected:
The owner process can read and write to the table. Other processes can only
read the table. This is the default setting for the access rights.
private:
Only the owner process can read or write to the table.
named_table:
If this option is present, name Name is associated with the table identifier.
The name can then be used instead of the table identifier in subsequent
operations.
{keypos,Pos}:
Specifies which element in the stored tuples to use as key. By default, it is
the first element, that is, Pos=1. However, this is not always appropriate. In
particular, we do not want the first element to be the key if we want to store
Erlang records in a table.
Notice that any tuple stored in the table must have at least Pos number of
elements.
{heir,Pid,HeirData} | {heir,none}:
Set a process as heir. The heir inherits the table if the owner terminates.
Message {'ETS-TRANSFER',tid(),FromPid,HeirData} is sent to the heir when that
occurs. The heir must be a local process. Default heir is none, which destroys
the table when the owner terminates.
{write_concurrency,boolean()}:
Performance tuning. Defaults to false, in which case an operation that mutates
(writes to) the table obtains exclusive access, blocking any concurrent access
of the same table until finished. If set to true, the table is optimized to
concurrent write access. Different objects of the same table can be mutated
(and read) by concurrent processes. This is achieved to some degree at the
expense of memory consumption and the performance of sequential access and
concurrent reading.
Option write_concurrency can be combined with option read_concurrency. You
typically want to combine these when large concurrent read bursts and large
concurrent write bursts are common; for more information, see option
read_concurrency.
Notice that this option does not change any guarantees about atomicity and
isolation. Functions that makes such promises over many objects (like insert/2)
gain less (or nothing) from this option.
Table type ordered_set is not affected by this option. Also, the memory
consumption inflicted by both write_concurrency and read_concurrency is a
constant overhead per table. This overhead can be especially large when both
options are combined.
{read_concurrency,boolean()}:
Performance tuning. Defaults to false. When set to true, the table is optimized
for concurrent read operations. When this option is enabled on a runtime system
with SMP support, read operations become much cheaper; especially on systems
with multiple physical processors. However, switching between read and write
operations becomes more expensive.
You typically want to enable this option when concurrent read operations are
much more frequent than write operations, or when concurrent reads and writes
comes in large read and write bursts (that is, many reads not interrupted by
writes, and many writes not interrupted by reads).
You typically do not want to enable this option when the common access pattern
is a few read operations interleaved with a few write operations repeatedly. In
this case, you would get a performance degradation by enabling this option.
Option read_concurrency can be combined with option write_concurrency. You
typically want to combine these when large concurrent read bursts and large
concurrent write bursts are common.
compressed:
If this option is present, the table data is stored in a more compact format to
consume less memory. However, it will make table operations slower. Especially
operations that need to inspect entire objects, such as match and select, get
much slower. The key element is not compressed.
next(Tab, Key1) -> Key2 | '$end_of_table'
Types:
Tab = tab()
Key1 = Key2 = term()
Returns the next key Key2, following key Key1 in table Tab. For table type
ordered_set, the next key in Erlang term order is returned. For other table types,
the next key according to the internal order of the table is returned. If no next
key exists, '$end_of_table' is returned.
To find the first key in the table, use first/1.
Unless a table of type set, bag, or duplicate_bag is protected using
safe_fixtable/2, a traversal can fail if concurrent updates are made to the table.
For table type ordered_set, the function returns the next key in order, even if the
object does no longer exist.
prev(Tab, Key1) -> Key2 | '$end_of_table'
Types:
Tab = tab()
Key1 = Key2 = term()
Returns the previous key Key2, preceding key Key1 according to Erlang term order in
table Tab of type ordered_set. For other table types, the function is synonymous to
next/2. If no previous key exists, '$end_of_table' is returned.
To find the last key in the table, use last/1.
rename(Tab, Name) -> Name
Types:
Tab = tab()
Name = atom()
Renames the named table Tab to the new name Name. Afterwards, the old name cannot
be used to access the table. Renaming an unnamed table has no effect.
repair_continuation(Continuation, MatchSpec) -> Continuation
Types:
Continuation = continuation()
MatchSpec = match_spec()
Restores an opaque continuation returned by select/3 or select/1 if the
continuation has passed through external term format (been sent between nodes or
stored on disk).
The reason for this function is that continuation terms contain compiled match
specifications and therefore are invalidated if converted to external term format.
Given that the original match specification is kept intact, the continuation can be
restored, meaning it can once again be used in subsequent select/1 calls even
though it has been stored on disk or on another node.
Examples:
The following sequence of calls fails:
T=ets:new(x,[]),
...
{_,C} = ets:select(T,ets:fun2ms(fun({N,_}=A)
when (N rem 10) =:= 0 ->
A
end),10),
Broken = binary_to_term(term_to_binary(C)),
ets:select(Broken).
The following sequence works, as the call to repair_continuation/2 reestablishes
the (deliberately) invalidated continuation Broken.
T=ets:new(x,[]),
...
MS = ets:fun2ms(fun({N,_}=A)
when (N rem 10) =:= 0 ->
A
end),
{_,C} = ets:select(T,MS,10),
Broken = binary_to_term(term_to_binary(C)),
ets:select(ets:repair_continuation(Broken,MS)).
Note:
This function is rarely needed in application code. It is used by Mnesia to provide
distributed select/3 and select/1 sequences. A normal application would either use
Mnesia or keep the continuation from being converted to external format.
The reason for not having an external representation of a compiled match
specification is performance. It can be subject to change in future releases, while
this interface remains for backward compatibility.
safe_fixtable(Tab, Fix) -> true
Types:
Tab = tab()
Fix = boolean()
Fixes a table of type set, bag, or duplicate_bag for safe traversal.
A process fixes a table by calling safe_fixtable(Tab, true). The table remains
fixed until the process releases it by calling safe_fixtable(Tab, false), or until
the process terminates.
If many processes fix a table, the table remains fixed until all processes have
released it (or terminated). A reference counter is kept on a per process basis,
and N consecutive fixes requires N releases to release the table.
When a table is fixed, a sequence of first/1 and next/2 calls are guaranteed to
succeed, and each object in the table is returned only once, even if objects are
removed or inserted during the traversal. The keys for new objects inserted during
the traversal can be returned by next/2 (it depends on the internal ordering of the
keys).
Example:
clean_all_with_value(Tab,X) ->
safe_fixtable(Tab,true),
clean_all_with_value(Tab,X,ets:first(Tab)),
safe_fixtable(Tab,false).
clean_all_with_value(Tab,X,'$end_of_table') ->
true;
clean_all_with_value(Tab,X,Key) ->
case ets:lookup(Tab,Key) of
[{Key,X}] ->
ets:delete(Tab,Key);
_ ->
true
end,
clean_all_with_value(Tab,X,ets:next(Tab,Key)).
Notice that no deleted objects are removed from a fixed table until it has been
released. If a process fixes a table but never releases it, the memory used by the
deleted objects is never freed. The performance of operations on the table also
degrades significantly.
To retrieve information about which processes have fixed which tables, use
info(Tab, safe_fixed_monotonic_time). A system with many processes fixing tables
can need a monitor that sends alarms when tables have been fixed for too long.
Notice that for table type ordered_set, safe_fixtable/2 is not necessary, as calls
to first/1 and next/2 always succeed.
select(Continuation) -> {[Match], Continuation} | '$end_of_table'
Types:
Match = term()
Continuation = continuation()
Continues a match started with select/3. The next chunk of the size specified in
the initial select/3 call is returned together with a new Continuation, which can
be used in subsequent calls to this function.
When there are no more objects in the table, '$end_of_table' is returned.
select(Tab, MatchSpec) -> [Match]
Types:
Tab = tab()
MatchSpec = match_spec()
Match = term()
Matches the objects in table Tab using a match specification. This is a more
general call than match/2 and match_object/2 calls. In its simplest form, the match
specification is as follows:
MatchSpec = [MatchFunction]
MatchFunction = {MatchHead, [Guard], [Result]}
MatchHead = "Pattern as in ets:match"
Guard = {"Guardtest name", ...}
Result = "Term construct"
This means that the match specification is always a list of one or more tuples (of
arity 3). The first element of the tuple is to be a pattern as described in
match/2. The second element of the tuple is to be a list of 0 or more guard tests
(described below). The third element of the tuple is to be a list containing a
description of the value to return. In almost all normal cases, the list contains
exactly one term that fully describes the value to return for each object.
The return value is constructed using the "match variables" bound in MatchHead or
using the special match variables '$_' (the whole matching object) and '$$' (all
match variables in a list), so that the following match/2 expression:
ets:match(Tab,{'$1','$2','$3'})
is exactly equivalent to:
ets:select(Tab,[{{'$1','$2','$3'},[],['$$']}])
And that the following match_object/2 call:
ets:match_object(Tab,{'$1','$2','$1'})
is exactly equivalent to
ets:select(Tab,[{{'$1','$2','$1'},[],['$_']}])
Composite terms can be constructed in the Result part either by simply writing a
list, so that the following code:
ets:select(Tab,[{{'$1','$2','$3'},[],['$$']}])
gives the same output as:
ets:select(Tab,[{{'$1','$2','$3'},[],[['$1','$2','$3']]}])
That is, all the bound variables in the match head as a list. If tuples are to be
constructed, one has to write a tuple of arity 1 where the single element in the
tuple is the tuple one wants to construct (as an ordinary tuple can be mistaken for
a Guard).
Therefore the following call:
ets:select(Tab,[{{'$1','$2','$1'},[],['$_']}])
gives the same output as:
ets:select(Tab,[{{'$1','$2','$1'},[],[{{'$1','$2','$3'}}]}])
This syntax is equivalent to the syntax used in the trace patterns (see the
dbg(3erl)) module in Runtime_Tools.
The Guards are constructed as tuples, where the first element is the test name and
the remaining elements are the test parameters. To check for a specific type (say a
list) of the element bound to the match variable '$1', one would write the test as
{is_list, '$1'}. If the test fails, the object in the table does not match and the
next MatchFunction (if any) is tried. Most guard tests present in Erlang can be
used, but only the new versions prefixed is_ are allowed (is_float, is_atom, and so
on).
The Guard section can also contain logic and arithmetic operations, which are
written with the same syntax as the guard tests (prefix notation), so that the
following guard test written in Erlang:
is_integer(X), is_integer(Y), X + Y < 4711
is expressed as follows (X replaced with '$1' and Y with '$2'):
[{is_integer, '$1'}, {is_integer, '$2'}, {'<', {'+', '$1', '$2'}, 4711}]
For tables of type ordered_set, objects are visited in the same order as in a
first/next traversal. This means that the match specification is executed against
objects with keys in the first/next order and the corresponding result list is in
the order of that execution.
select(Tab, MatchSpec, Limit) ->
{[Match], Continuation} | '$end_of_table'
Types:
Tab = tab()
MatchSpec = match_spec()
Limit = integer() >= 1
Match = term()
Continuation = continuation()
Works like select/2, but only returns a limited (Limit) number of matching objects.
Term Continuation can then be used in subsequent calls to select/1 to get the next
chunk of matching objects. This is a space-efficient way to work on objects in a
table, which is still faster than traversing the table object by object using
first/1 and next/2.
If the table is empty, '$end_of_table' is returned.
select_count(Tab, MatchSpec) -> NumMatched
Types:
Tab = tab()
MatchSpec = match_spec()
NumMatched = integer() >= 0
Matches the objects in table Tab using a match specification. If the match
specification returns true for an object, that object considered a match and is
counted. For any other result from the match specification the object is not
considered a match and is therefore not counted.
This function can be described as a match_delete/2 function that does not delete
any elements, but only counts them.
The function returns the number of objects matched.
select_delete(Tab, MatchSpec) -> NumDeleted
Types:
Tab = tab()
MatchSpec = match_spec()
NumDeleted = integer() >= 0
Matches the objects in table Tab using a match specification. If the match
specification returns true for an object, that object is removed from the table.
For any other result from the match specification the object is retained. This is a
more general call than the match_delete/2 call.
The function returns the number of objects deleted from the table.
Note:
The match specification has to return the atom true if the object is to be deleted.
No other return value gets the object deleted. So one cannot use the same match
specification for looking up elements as for deleting them.
select_replace(Tab, MatchSpec) -> NumReplaced
Types:
Tab = tab()
MatchSpec = match_spec()
NumReplaced = integer() >= 0
Matches the objects in the table Tab using a match specification. For each matched
object, the existing object is replaced with the match specification result.
The match-and-replace operation for each individual object is guaranteed to be
atomic and isolated. The select_replace table iteration as a whole, like all other
select functions, does not give such guarantees.
The match specifiction must be guaranteed to retain the key of any matched object.
If not, select_replace will fail with badarg without updating any objects.
For the moment, due to performance and semantic constraints, tables of type bag are
not yet supported.
The function returns the total number of replaced objects.
Example
For all 2-tuples with a list in second position, add atom 'marker' first in the
list:
1> T = ets:new(x,[]), ets:insert(T, {key, [1, 2, 3]}).
true
2> MS = ets:fun2ms(fun({K, L}) when is_list(L) -> {K, [marker | L]} end).
[{{'$1','$2'},[{is_list,'$2'}],[{{'$1',[marker|'$2']}}]}]
3> ets:select_replace(T, MS).
1
4> ets:tab2list(T).
[{key,[marker,1,2,3]}]
A generic single object compare-and-swap operation:
[Old] = ets:lookup(T, Key),
New = update_object(Old),
Success = (1 =:= ets:select_replace(T, [{Old, [], [{const, New}]}])),
select_reverse(Continuation) ->
{[Match], Continuation} | '$end_of_table'
Types:
Continuation = continuation()
Match = term()
Continues a match started with select_reverse/3. For tables of type ordered_set,
the traversal of the table continues to objects with keys earlier in the Erlang
term order. The returned list also contains objects with keys in reverse order. For
all other table types, the behavior is exactly that of select/1.
Example:
1> T = ets:new(x,[ordered_set]).
2> [ ets:insert(T,{N}) || N <- lists:seq(1,10) ].
...
3> {R0,C0} = ets:select_reverse(T,[{'_',[],['$_']}],4).
...
4> R0.
[{10},{9},{8},{7}]
5> {R1,C1} = ets:select_reverse(C0).
...
6> R1.
[{6},{5},{4},{3}]
7> {R2,C2} = ets:select_reverse(C1).
...
8> R2.
[{2},{1}]
9> '$end_of_table' = ets:select_reverse(C2).
...
select_reverse(Tab, MatchSpec) -> [Match]
Types:
Tab = tab()
MatchSpec = match_spec()
Match = term()
Works like select/2, but returns the list in reverse order for table type
ordered_set. For all other table types, the return value is identical to that of
select/2.
select_reverse(Tab, MatchSpec, Limit) ->
{[Match], Continuation} | '$end_of_table'
Types:
Tab = tab()
MatchSpec = match_spec()
Limit = integer() >= 1
Match = term()
Continuation = continuation()
Works like select/3, but for table type ordered_set traversing is done starting at
the last object in Erlang term order and moves to the first. For all other table
types, the return value is identical to that of select/3.
Notice that this is not equivalent to reversing the result list of a select/3 call,
as the result list is not only reversed, but also contains the last Limit matching
objects in the table, not the first.
setopts(Tab, Opts) -> true
Types:
Tab = tab()
Opts = Opt | [Opt]
Opt = {heir, pid(), HeirData} | {heir, none}
HeirData = term()
Sets table options. The only allowed option to be set after the table has been
created is heir. The calling process must be the table owner.
slot(Tab, I) -> [Object] | '$end_of_table'
Types:
Tab = tab()
I = integer() >= 0
Object = tuple()
This function is mostly for debugging purposes, Normally first/next or last/prev
are to be used instead.
Returns all objects in slot I of table Tab. A table can be traversed by repeatedly
calling the function, starting with the first slot I=0 and ending when
'$end_of_table' is returned. If argument I is out of range, the function fails with
reason badarg.
Unless a table of type set, bag, or duplicate_bag is protected using
safe_fixtable/2, a traversal can fail if concurrent updates are made to the table.
For table type ordered_set, the function returns a list containing object I in
Erlang term order.
tab2file(Tab, Filename) -> ok | {error, Reason}
Types:
Tab = tab()
Filename = file:name()
Reason = term()
Dumps table Tab to file Filename.
Equivalent to tab2file(Tab, Filename,[])
tab2file(Tab, Filename, Options) -> ok | {error, Reason}
Types:
Tab = tab()
Filename = file:name()
Options = [Option]
Option = {extended_info, [ExtInfo]} | {sync, boolean()}
ExtInfo = md5sum | object_count
Reason = term()
Dumps table Tab to file Filename.
When dumping the table, some information about the table is dumped to a header at
the beginning of the dump. This information contains data about the table type,
name, protection, size, version, and if it is a named table. It also contains notes
about what extended information is added to the file, which can be a count of the
objects in the file or a MD5 sum of the header and records in the file.
The size field in the header might not correspond to the number of records in the
file if the table is public and records are added or removed from the table during
dumping. Public tables updated during dump, and that one wants to verify when
reading, needs at least one field of extended information for the read verification
process to be reliable later.
Option extended_info specifies what extra information is written to the table dump:
object_count:
The number of objects written to the file is noted in the file footer, so file
truncation can be verified even if the file was updated during dump.
md5sum:
The header and objects in the file are checksummed using the built-in MD5
functions. The MD5 sum of all objects is written in the file footer, so that
verification while reading detects the slightest bitflip in the file data.
Using this costs a fair amount of CPU time.
Whenever option extended_info is used, it results in a file not readable by
versions of ETS before that in STDLIB 1.15.1
If option sync is set to true, it ensures that the content of the file is written
to the disk before tab2file returns. Defaults to {sync, false}.
tab2list(Tab) -> [Object]
Types:
Tab = tab()
Object = tuple()
Returns a list of all objects in table Tab.
tabfile_info(Filename) -> {ok, TableInfo} | {error, Reason}
Types:
Filename = file:name()
TableInfo = [InfoItem]
InfoItem =
{name, atom()} |
{type, Type} |
{protection, Protection} |
{named_table, boolean()} |
{keypos, integer() >= 0} |
{size, integer() >= 0} |
{extended_info, [ExtInfo]} |
{version,
{Major :: integer() >= 0, Minor :: integer() >= 0}}
ExtInfo = md5sum | object_count
Type = bag | duplicate_bag | ordered_set | set
Protection = private | protected | public
Reason = term()
Returns information about the table dumped to file by tab2file/2 or tab2file/3.
The following items are returned:
name:
The name of the dumped table. If the table was a named table, a table with the
same name cannot exist when the table is loaded from file with file2tab/2. If
the table is not saved as a named table, this field has no significance when
loading the table from file.
type:
The ETS type of the dumped table (that is, set, bag, duplicate_bag, or
ordered_set). This type is used when loading the table again.
protection:
The protection of the dumped table (that is, private, protected, or public). A
table loaded from the file gets the same protection.
named_table:
true if the table was a named table when dumped to file, otherwise false.
Notice that when a named table is loaded from a file, there cannot exist a
table in the system with the same name.
keypos:
The keypos of the table dumped to file, which is used when loading the table
again.
size:
The number of objects in the table when the table dump to file started. For a
public table, this number does not need to correspond to the number of objects
saved to the file, as objects can have been added or deleted by another process
during table dump.
extended_info:
The extended information written in the file footer to allow stronger
verification during table loading from file, as specified to tab2file/3. Notice
that this function only tells which information is present, not the values in
the file footer. The value is a list containing one or more of the atoms
object_count and md5sum.
version:
A tuple {Major,Minor} containing the major and minor version of the file format
for ETS table dumps. This version field was added beginning with STDLIB 1.5.1.
Files dumped with older versions return {0,0} in this field.
An error is returned if the file is inaccessible, badly damaged, or not produced
with tab2file/2 or tab2file/3.
table(Tab) -> QueryHandle
table(Tab, Options) -> QueryHandle
Types:
Tab = tab()
QueryHandle = qlc:query_handle()
Options = [Option] | Option
Option = {n_objects, NObjects} | {traverse, TraverseMethod}
NObjects = default | integer() >= 1
TraverseMethod =
first_next |
last_prev |
select |
{select, MatchSpec :: match_spec()}
Returns a Query List Comprehension (QLC) query handle. The qlc module provides a
query language aimed mainly at Mnesia, but ETS tables, Dets tables, and lists are
also recognized by QLC as sources of data. Calling table/1,2 is the means to make
the ETS table Tab usable to QLC.
When there are only simple restrictions on the key position, QLC uses lookup/2 to
look up the keys. When that is not possible, the whole table is traversed. Option
traverse determines how this is done:
first_next:
The table is traversed one key at a time by calling first/1 and next/2.
last_prev:
The table is traversed one key at a time by calling last/1 and prev/2.
select:
The table is traversed by calling select/3 and select/1. Option n_objects
determines the number of objects returned (the third argument of select/3); the
default is to return 100 objects at a time. The match specification (the second
argument of select/3) is assembled by QLC: simple filters are translated into
equivalent match specifications while more complicated filters must be applied
to all objects returned by select/3 given a match specification that matches
all objects.
{select, MatchSpec}:
As for select, the table is traversed by calling select/3 and select/1. The
difference is that the match specification is explicitly specified. This is how
to state match specifications that cannot easily be expressed within the syntax
provided by QLC.
Examples:
An explicit match specification is here used to traverse the table:
9> true = ets:insert(Tab = ets:new(t, []), [{1,a},{2,b},{3,c},{4,d}]),
MS = ets:fun2ms(fun({X,Y}) when (X > 1) or (X < 5) -> {Y} end),
QH1 = ets:table(Tab, [{traverse, {select, MS}}]).
An example with an implicit match specification:
10> QH2 = qlc:q([{Y} || {X,Y} <- ets:table(Tab), (X > 1) or (X < 5)]).
The latter example is equivalent to the former, which can be verified using
function qlc:info/1:
11> qlc:info(QH1) =:= qlc:info(QH2).
true
qlc:info/1 returns information about a query handle, and in this case identical
information is returned for the two query handles.
take(Tab, Key) -> [Object]
Types:
Tab = tab()
Key = term()
Object = tuple()
Returns and removes a list of all objects with key Key in table Tab.
The specified Key is used to identify the object by either comparing equal the key
of an object in an ordered_set table, or matching in other types of tables (for
details on the difference, see lookup/2 and new/2).
test_ms(Tuple, MatchSpec) -> {ok, Result} | {error, Errors}
Types:
Tuple = tuple()
MatchSpec = match_spec()
Result = term()
Errors = [{warning | error, string()}]
This function is a utility to test a match specification used in calls to select/2.
The function both tests MatchSpec for "syntactic" correctness and runs the match
specification against object Tuple.
If the match specification is syntactically correct, the function either returns
{ok,Result}, where Result is what would have been the result in a real select/2
call, or false if the match specification does not match object Tuple.
If the match specification contains errors, tuple {error, Errors} is returned,
where Errors is a list of natural language descriptions of what was wrong with the
match specification.
This is a useful debugging and test tool, especially when writing complicated
select/2 calls.
See also: erlang:match_spec_test/3.
to_dets(Tab, DetsTab) -> DetsTab
Types:
Tab = tab()
DetsTab = dets:tab_name()
Fills an already created/opened Dets table with the objects in the already opened
ETS table named Tab. The Dets table is emptied before the objects are inserted.
update_counter(Tab, Key, UpdateOp) -> Result
update_counter(Tab, Key, UpdateOp, Default) -> Result
update_counter(Tab, Key, X3 :: [UpdateOp]) -> [Result]
update_counter(Tab, Key, X3 :: [UpdateOp], Default) -> [Result]
update_counter(Tab, Key, Incr) -> Result
update_counter(Tab, Key, Incr, Default) -> Result
Types:
Tab = tab()
Key = term()
UpdateOp = {Pos, Incr} | {Pos, Incr, Threshold, SetValue}
Pos = Incr = Threshold = SetValue = Result = integer()
Default = tuple()
This function provides an efficient way to update one or more counters, without the
trouble of having to look up an object, update the object by incrementing an
element, and insert the resulting object into the table again. (The update is done
atomically, that is, no process can access the ETS table in the middle of the
operation.)
This function destructively update the object with key Key in table Tab by adding
Incr to the element at position Pos. The new counter value is returned. If no
position is specified, the element directly following key (<keypos>+1) is updated.
If a Threshold is specified, the counter is reset to value SetValue if the
following conditions occur:
* Incr is not negative (>= 0) and the result would be greater than (>) Threshold.
* Incr is negative (< 0) and the result would be less than (<) Threshold.
A list of UpdateOp can be supplied to do many update operations within the object.
The operations are carried out in the order specified in the list. If the same
counter position occurs more than once in the list, the corresponding counter is
thus updated many times, each time based on the previous result. The return value
is a list of the new counter values from each update operation in the same order as
in the operation list. If an empty list is specified, nothing is updated and an
empty list is returned. If the function fails, no updates is done.
The specified Key is used to identify the object by either matching the key of an
object in a set table, or compare equal to the key of an object in an ordered_set
table (for details on the difference, see lookup/2 and new/2).
If a default object Default is specified, it is used as the object to be updated if
the key is missing from the table. The value in place of the key is ignored and
replaced by the proper key value. The return value is as if the default object had
not been used, that is, a single updated element or a list of them.
The function fails with reason badarg in the following situations:
* The table type is not set or ordered_set.
* No object with the correct key exists and no default object was supplied.
* The object has the wrong arity.
* The default object arity is smaller than <keypos>.
* Any field from the default object that is updated is not an integer.
* The element to update is not an integer.
* The element to update is also the key.
* Any of Pos, Incr, Threshold, or SetValue is not an integer.
update_element(Tab, Key, ElementSpec :: {Pos, Value}) -> boolean()
update_element(Tab, Key, ElementSpec :: [{Pos, Value}]) ->
boolean()
Types:
Tab = tab()
Key = term()
Value = term()
Pos = integer() >= 1
This function provides an efficient way to update one or more elements within an
object, without the trouble of having to look up, update, and write back the entire
object.
This function destructively updates the object with key Key in table Tab. The
element at position Pos is given the value Value.
A list of {Pos,Value} can be supplied to update many elements within the same
object. If the same position occurs more than once in the list, the last value in
the list is written. If the list is empty or the function fails, no updates are
done. The function is also atomic in the sense that other processes can never see
any intermediate results.
Returns true if an object with key Key is found, otherwise false.
The specified Key is used to identify the object by either matching the key of an
object in a set table, or compare equal to the key of an object in an ordered_set
table (for details on the difference, see lookup/2 and new/2).
The function fails with reason badarg in the following situations:
* The table type is not set or ordered_set.
* Pos < 1.
* Pos > object arity.
* The element to update is also the key.