NAME

       fitgrid_params - This document briefly describes all the internal parameters of Fitgrid.

DESCRIPTION

       Each entry below includes the name of a parameter, its Fortran type (use the obvious
       equivalents for C), its default value, and a short description of the parameter.

       ´SIG´   -   Real   -    1.
              Value of the tension factor.

       ´SL1´   -   Real   -    0.
              The slope of the curve at the first point (see parameter SF1).

       ´SLN´   -   Real   -    0.
              The slope of the curve at the final point (see parameter SF1).

       ´SF1´   -   Integer   -    3
              Controls the use of parameters SL1 and SL2: 0=use both; 1=use SL1 only; 2=use SL2
              only; 3=use neither.

       ´SF2´   -   Integer   -    3
              Controls the use of parameters SMT and EPS: 0=use neither; 1=use both; 2=use SMT
              only; 3=use EPS only.

       ´SMT´   -   Real   -   none
              Smoothing parameter for ftcurvs, ftcurvps, c_ftcurvs, and c_ftcurvps.

       ´EPS´   -   Real   -   none
              Smoothing parameter for ftcurvs, ftcurvps, c_ftcurvs, and c_ftcurvps.

       ´ZX1´   -   Real array   -   none
              X partials at left for ftsurf and c_ftsurf.

       ´ZXM´   -   Real array   -   none
              X partials at right for ftsurf and c_ftsurf.

       ´ZY1´   -   Real array   -   none
              Y partials at bottom for ftsurf and c_ftsurf.

       ´ZYN´   -   Real array   -   none
              Y partials at top for ftsurf and c_ftsurf.

       ´Z11´   -   Real   -   none
              X-Y partial at lower left for ftsurf and c_ftsurf.

       ´ZM1´   -   Real   -   none
              X-Y partial at lower right for ftsurf and c_ftsurf.

       ´Z1N´   -   Real   -   none
              X-Y partial at upper left for ftsurf and c_ftsurf.

       ´ZMN´   -   Real   -   none
              X-Y partial at upper right for ftsurf and c_ftsurf.

       ´DF1´   -   Integer   -   1
              Flag indicating if ZX1 is user supplied: 0=yes; 1=no.

       ´DF2´   -   Integer   -   1
              Flag indicating if ZXM is user supplied: 0=yes; 1=no.

       ´DF3´   -   Integer   -   1
              Flag indicating if ZY1 is user supplied: 0=yes; 1=no.

       ´DF4´   -   Integer   -   1
              Flag indicating if ZYN is user supplied: 0=yes; 1=no.

       ´DF5´   -   Integer   -   1
              Flag indicating if Z11 is user supplied: 0=yes; 1=no.

       ´DF6´   -   Integer   -   1
              Flag indicating if ZM1 is user supplied: 0=yes; 1=no.

       ´DF7´   -   Integer   -   1
              Flag indicating if Z1M is user supplied: 0=yes; 1=no.

       ´DF8´   -   Integer   -   1
              Flag indicating if ZMN is user supplied: 0=yes; 1=no.

SEE ALSO

       fitgrid, fitgrid_params, curv1, curv2, curvd, curvi, curvp1, curvp2, curvpi, curvs,
       curvps, kurv1, kurv2, kurvd, kurvp1, kurvp2, kurvpd, surf1, surf2, c_ftcurv, c_ftcurvd,
       c_ftcurvi, c_ftcurvp, c_ftcurvpi, c_ftcurvs, c_ftcurvps, c_ftkurv, c_ftkurvp, c_ftkurvd,
       c_ftkurvpd, c_ftsurf, c_ftseti, c_ftgeti, c_ftsetr, c_ftgetr, c_ftsetc, c_ftgetc,
       c_ftsetfa, c_ftgetfa_size, c_ftgetfa_data.

       Complete documentation for Fitgrid is available at URL
       http://ngwww.ucar.edu/ngdoc/ng/ngmath/fitgrid/fithome.html

COPYRIGHT

       Copyright (C) 2000
       University Corporation for Atmospheric Research

       The use of this Software is governed by a License Agreement.