NAME

       ModuleParrot.conf - Configuration file for the SvxLink server Parrot module

DESCRIPTION

       svxlink  is  a  general  purpose  voice  service  system  for ham radio use. This man-page
       describe the SvxLink server configuration for the Parrot module.

       The Parrot module record audio as long as the squelch is open and then plays it back. This
       can  be  used as a simplex repeater or for tests. It also plays back (spelling the digits)
       the DTMF digits it receives.

CONFIGURATION VARIABLES

       There are a couple of configuration  variables  that  are  common  to  all  modules.   The
       documentation for these can be found in the svxlink.conf(5) manual page.

       Here  is  the  description of all module specific configuration variables that the SvxLink
       Parrot module understands.

   ModuleParrot
       FIFO_LEN
              The length, in seconds, of the FIFO (First In First Out) audio buffer  where  audio
              is recorded to. When the squelch has been opened for longer than the time specified
              here, the oldest audio in the buffer will be thrown away.

       REPEAT_DELAY
              Specify a time, in milliseconds, that the parrot module  will  wait  after  squelch
              close before playing back the recorded message. This is mostly a way to prevent the
              parrot module to start sending if the squlech momentarily closes on weak signals.

FILES

       /etc/svxlink/svxlink.conf (or deprecated /etc/svxlink.conf)
              The system wide configuration file.

       ~/.svxlink/svxlink.conf
              Per user configuration file.

       /etc/svxlink/svxlink.d/ModuleParrot.conf
              Global  modularized  configuration  file.  Depends  on  the  CFG_DIR  configuration
              variable setting.

       ~/.svxlink/svxlink.d/ModuleParrot.conf
              Per  user  modularized  configuration  file.  Depends  on the CFG_DIR configuration
              variable setting.

AUTHOR

       Tobias Blomberg (SM0SVX) <sm0svx at users dot sourceforge dot net>

SEE ALSO

       svxlink.conf(5)