Ubuntu Manpage: direvent.conf - configuration file for direvent(8).

NAME

       direvent.conf - configuration file for direvent(8).

DESCRIPTION

       The configuration file consists of statements and comments.

       There  are  three classes of lexical tokens: keywords, values, and separators. Blanks, tabs, newlines and
       comments, collectively called white space are ignored except as they serve to separate tokens. Some white
       space is required to separate otherwise adjacent keywords and values.

COMMENTS

Comments may appear anywhere where white space may appear in the configuration file. There are two kinds
of comments: single-line and multi-line comments. Single-line comments start with # or // and continue
to the end of the line:

# This is a comment
// This too is a comment

Multi-line or C-style comments start with the two characters /* (slash, star) and continue until the
first occurrence of */ (star, slash).

Multi-line comments cannot be nested. However, single-line comments may well appear within multi-line
ones.

Pragmatic Comments
Pragmatic comments are similar to the usual single-line comments, except that they cause some changes in
the way the configuration is parsed. Pragmatic comments begin with a # sign and end with the next
physical newline character.

#include <FILE>
#include FILE
Include the contents of the file FILE. If FILE is an absolute file name, the named file is
included. An error message will be issued if it does not exist.

If FILE contains wildcard characters (*, [, ], or ?), it is interpreted as a shell globbing
pattern and all files matching that pattern are included, in lexicographical order. If no
matching files are found, the directive is replaced with an empty line.

Otherwise, the form with angle brackets searches for file in the include search path, while the
second one looks for it in the current working directory first, and, if not found there, in the
include search path. If the file is not found, an error message will be issued.

The order of directories is as follows. First, direvent scans any directories given with -I
options, in the same order as given on the command line, and then the directories in the standard
include search path. The latter is defined at compile time and can be inspected in the output of
the --help option.

#include_once <FILE>
#include_once FILE
Same as #include, except that, if the FILE (or any of the files it expands to) has already been
included, it will not be included again.

#line num
#line num "FILE"
This line causes the parser to believe, for purposes of error diagnostics, that the line number of
the next source line is given by num and the current input file is named by FILE. If the latter is
absent, the remembered file name does not change.

# num "FILE"
This is a special form of the #line statement, understood for compatibility with the C
preprocessor.

STATEMENTS

Simple statement
A simple statement consists of a keyword and value separated by any amount of whitespace. Simple
statement is terminated with a semicolon (;).

The following is a simple statement:

pidfile /var/run/direvent.pid;

See below for a list of valid simple statements.

A value can be one of the following:

number A number is a sequence of decimal digits.

boolean
A boolean value is one of the following: yes, true, t or 1, meaning true, and no, false, nil, 0
meaning false.

unquoted string
An unquoted string may contain letters, digits, and any of the following characters: _, -, ., /,
@, *, :.

quoted string
A quoted string is any sequence of characters enclosed in double-quotes ("). A backslash
appearing within a quoted string introduces an escape sequence, which is replaced with a single
character according to the following rules:

Sequence Expansion ASCII
\\ \ 134
\" " 042
\a audible bell 007
\b backspace 010
\f form-feed 014
\n new line 012
\r charriage return 015
\t horizontal tabulation 011
\v vertical tabulation 013

In addition, the sequence \newline is removed from the string. This allows one to split long
strings over several physical lines, e.g.:

"a long string may be\
split over several lines"

If the character following a backslash is not one of those specified above, the backslash is
ignored and a warning is issued.

Two or more adjacent quoted strings are concatenated, which gives another way to split long
strings over several lines to improve readability. The following fragment produces the same
result as the example above:

"a long string may be"
" split over several lines"

Here-document
A here-document is a special construct that allows one to introduce strings of text containing
embedded newlines.

The <<word construct instructs the parser to read all the following lines up to the line
containing only word, with possible trailing blanks. Any lines thus read are concatenated
together into a single string. For example:

<<EOT
A multiline
string
EOT

The body of a here-document is interpreted the same way as a double-quoted string, unless word is
preceded by a backslash (e.g. <<\EOT) or enclosed in double-quotes, in which case the text is
read as is, without interpretation of escape sequences.

If word is prefixed with - (a dash), then all leading tab characters are stripped from input lines
and the line containing word. Furthermore, - is followed by a single space, all leading
whitespace is stripped from them. This allows one to indent here-documents in a natural fashion.
For example:

<<- TEXT
The leading whitespace will be
ignored when reading these lines.
TEXT

It is important that the terminating delimiter be the only token on its line. The only exception
to this rule is allowed if a here-document appears as the last element of a statement. In this
case a semicolon can be placed on the same line with its terminating delimiter, as in:

help-text <<-EOT
A sample help text.
EOT;

list A comma-separated list of values, enclosed in parentheses. The following example shows a
statement whose value is a list of strings:

option (wait, stderr);

In any context where a list is appropriate, a single value is allowed without being a member of a
list: it is equivalent to a list with a single member. This means that, e.g.

option wait;

is equivalent to

option (wait);

Block Statement
A block statement introduces a logical group of statements. It consists of a keyword, followed by an
optional value, called a tag, and a sequence of statements enclosed in curly braces, as shown in the
example below:

watcher {
path /etc;
event create;
}

The closing curly brace may be followed by a semicolon, although this is not required.

MACRO EXPANSION

Arguments of some statements undergo macro expansion before use. During the macro expansion any
occurrence of ${NAME} is replaced by the value of macro NAME. Macro names follow the usual convention:
they begin with a letter and contain letters digits and underscores. The curly braces around the NAME
are optional. They are required only if the macro reference is followed by a character that is not to be
interpreted as part of its name, as in ${command}string.

The following macros are defined:

file Name of the file covered by the event.

genev_code
Generic (system-independent) event code. It is a bitwise OR of the event codes represented as a
decimal number.

genev_name
Generic event name. If several generic events are reported simultaneously, the value of this
variable is a list of event names separated by space characters. Each name corresponds to a bit
in genev_code.

self_test_pid
The PID of the external command started with the --self-test (-T) option. If direvent is started
without this option, this variable is not defined.

sysev_code
System-dependent event code. It is a bitwise OR of the event codes represented as a decimal
number.

sysev_name
System-dependent event name. If several events are reported, the value of this variable is a list
of event names separated by space characters. Each name corresponds to a bit in sysev_code. See
the section SYSTEM DEPENDENCIES in direvent(8), for a list of system-dependent event names.

GENERAL SETTINGS

       user NAME;
              Sets the user to run as.  NAME must be a name of an existing user.

       foreground BOOL;
              Run in foreground.

       pidfile FILE;
              Upon successful startup store the PID of the daemon process in FILE.

       debug NUMBER;
              Set debug level.  Valid NUMBER values are 0 (no debug) to 3 (maximum verbosity).

LOGGING

       While  connected  to the terminal direvent outputs its diagnostics and debugging messages to the standard
       error.  After disconnecting from the controlling terminal it closes the first three file descriptors  and
       directs all its output to the syslog.  When running in foreground mode, its messages are sent both to the
       standard error and to the syslog.

       The following configuration statement controls the syslog output:

         syslog {
             facility STRING;
             tag STRING;
             print-priority BOOL;
         }

       The statements are:

       facility STRING;
              Set syslog facility.  STRING is one of the following: user, daemon, auth or authpriv, mail,  cron,
              local0 through local7 (case-insensitive), or a facility number.

       tag STRING;
              Tag syslog messages with STRING.  Normally the messages are tagged with the program name.

       print-priority BOOL;
              Prefix each message with its priority.

       An example syslog statement:

           syslog {
               facility local0;
               print-priority yes;
           }

WATCHER

The watcher statement configures a single event watcher. A watcher can control several events in
multiple pathnames. Any number of watcher statements is allowed in the configuration file, each one of
them declaring a separate watcher.

watcher {
path PATHNAME [recursive [NUMBER]];
file STRING-LIST;
event STRING-LIST;
command STRING;
user NAME;
timeout NUMBER;
option STRING-LIST;
environ ENV-SPEC;
}

The statements within a watcher block are:

path PATHNAME [recursive [NUMBER]];
Defines a pathname to watch. PATHNAME must be the name of an existing directory in the file
system. The watcher will watch events occurring for all files within that directory. If the
optional recursive clause is specified, this directory will be watched recursively, i.e. when any
subdirectory is created in it, direvent will set up a watcher for files in this subdirectory.
This new watcher will be an exact copy of the parent watcher, excepting for the pathnames. The
optional NUMBER parameter defines a cut-off nesting level for recursive watching. If supplied,
the recursive behaviour will apply only to the directories that are nested below that level.

Any number of path statements can appear in a watcher block. At least one path must be defined.

file STRING-LIST;
Selects which files are eligible for monitoring. The argument is a list of globbing patterns (in
the sense of fnmatch(3)) and/or extended regular expressions ( regex(7)) one of which the file
name must match in order for the watcher to act on it. Regular expressions must be surrounded by
a pair of slashes, optionally followed by the following flags:

b Use basic regular expressions.

i Enable case-insensitive matching.

A pattern or regular expression prefixed with ! matches file names that don't match the
pattern without !.

event STRING-LIST;
Configures the filesystem events to watch for in the directories declared by the path statements.
The argument is a list of event names. Both generic and system-dependent event namess are
allowed. Multiple event statements accumulate. A missing event statements means watch all
events. For example:

event (open,delete);

command STRING;
Defines a command to execute on event. STRING is a command line just as you would type it in
sh(1). It may contain macro variables, which will be expanded prior to execution. For example:

command "/bin/prog -event $genev_name -file $file";

See the section HANDLER ENVIRONMENT in direvent(8), for a detailed discussion of how the command
is executed.

user STRING;
Run command as this user.

timeout NUMBER;
Terminate the command if it runs longer than NUMBER seconds. The default is 5 seconds.

option STRING-LIST;
A list of additional options. The following options are defined:

shell Invoke the handler command as /bin/sh -c "command".

wait Wait for the program to terminate before handling next event from the event queue.
Normally the program runs asynchronously.

stdout Capture the standard output of the command and redirect it to the syslog with the
LOG_INFO priority.

stderr Capture the standard error of the command and redirect it to the syslog with the
LOG_ERR priority.

environ ENV-SPEC;
Modify command environment. By default the command inherits the environment of direvent augmented
with the following variables:

DIREVENT_SYSEV_CODE
The system-dependent event code (see the ${sysev_code} variable).

DIREVENT_SYSEV_NAME
The system-dependent event name or names (see the ${sysev_name} variable).

DIREVENT_GENEV_CODE
The generic event code (see the ${genev_code} variable).

DIREVENT_GENEV_NAME
The generic event name or names (see the ${genev_name} variable).

DIREVENT_FILE
The name of the affected file relative to the current working directory (see the ${file}
variable).

The environ statement allows for trimming the environment. Its argument is a list of one or more
of the folloeing environment modification directives:

- (a single dash)
Clear the inherited environment, but retain the variables added by direvent. The
removed environment variables can be selectively restored by the directives that follow.
This must be the first directive in the list.

-- (double-dash)
Clear the entire environment, including the variables added by direvent. This must be
the first directive in the list.

-NAME Unset the variable NAME.

-NAME=VAL
Unset the environment variable NAME only if its value is VAL.

NAME Restore the environment variable NAME. This directive is useful after - or -- to retain
some variables from the environment.

NAME=VALUE
Define environment variable NAME to the VALUE. VALUE can contain macro variables, which
will be expanded prior to the assignment.

NAME+=VALUE
Retain the variable NAME and append VALUE to its existing value. If no such variable is
present in the environment, it will be created and assigned the VALUE. If VALUE begins
with a punctuation character, this character is removed from it before the assignment.
This is convenient for using this construct with environment variables like PATH, e.g.:

PATH+=:/sbin

In this example, if PATH exists, :/sbin will be appended to it. Otherwise, it will be
created and assigned the value /sbin.

The VALUE can contain macro variables, which will be expanded prior to the assignment.

NAME=+VALUE
Retain the variable NAME and prepend VALUE to its existing value. If no such variable
is present in the environment, it will be created and assigned the VALUE. In this case,
if VALUE ends with a punctuation character, this character will be removed from it
before the assignment.