Provided by: sidplayfp_1.4.3-1_amd64 
NAME
sidplayfp.ini - Configuration file for sidplayfp(1).
DESCRIPTION
This page describes the options available for the configuration file of Sidplayfp. It is composed by a
number of sections, each one composed by a section name, enclosed by square brackets, followed by a list
of <parameter>=<value> lines.
sidplayfp.ini supports the following sections:
[SIDPlayfp] - Generic configuration
[Console] - Console appearance configuration
[Audio] - Audio output configuration
[Emulation] - Emulation engine parameters
All options and values are described in detail below.
For any of the following parameter, if it's specified more than one time the last entry encountered will
be used.
NOTE: if any of these options is specified outside its section, it will be ignored.
SIDPlayfp
Version=<number>
Configuration version
Songlength Database=<path>
Path for the Songlength DB. Should point to the DOCUMENTS/Songlengths.txt file under the HVSC
collection path. On *NIX systems if this value is not set, sidplayfp(1) will try
$PREFIX/share/sidplayfp/Songlengths.txt.
Default Play Length=mm:ss
Default play time if Songlength Database is not found.
Default Record Length=mm:ss
Default recording time when writing wave files if Songlength Database is not found.
Kernal Rom=<path>
Full path for the Kernal Rom file. This is the most important rom and should always be provided,
although many tunes will still work without. By default the program will look for a kernal file
under the following locations:
• $XDG_DATA_HOME/sidplayfp/
on *NIX systems where XDG_DATA_HOME is defined.
• $HOME/.local/share/sidplayfp/
on *NIX systems where XDG_DATA_HOME is not defined.
• $PREFIX/share/sidplayfp
on *NIX systems when not found in the above directories.
• %CSIDL_APPDATA%\\sidplayfp\\
on Windows systems where CSIDL_APPDATA is defined.
• %USERPROFILE%\\Application Data\\sidplayfp\\
on Windows systems where CSIDL_APPDATA is not defined.
Basic Rom=<path>
Full path for the Basic Rom file. This is mostly useful for playing BASIC tunes. By default the
program will look for a basic file under the same locations as above.
Chargen Rom=<path>
Full path for the Character generator Rom file. Almost useless for playback of tunes, but included
for completeness. By default the program will look for a chargen file under the same locations as
above.
Console
Ansi=true|false
Use ANSI escape sequences to provide colored output.
Char Top Left=<char>
Character for the top left corner.
Char Top Right=<char>
Character for the top right corner.
Char Bottom Left=<char>
Character for the bottom left corner.
Char Bottom Right=<char>
Character for the bottom right corner.
Char Vertical=<char>
Character for vertical lines.
Char Horizontal=<char>
Character for horizontal lines.
Char Junction Left=<char>
Character for left junctions.
Char Junction Right=<char>
Character for right junctions.
Audio
Frequency=<number>
Playback frequency expressed in Hertz. Default is 48000.
Channels=<number>
Number of channels, 1 for mono and 2 for stereo playback Default is 1.
BitsPerSample=<16|32>
Number of bits ber sample, used only for wav output. Using values other than the ones specified will
produce invalid output.
Emulation
Engine=<RESIDFP|RESID|HARDSID|NONE>
Set the SID emulation engine. Default is RESIDFP.
C64Model=<PAL|NTSC|OLD_NTSC|DREAN>
Default c64 model to use if not specified by tune, PAL for european PAL-B model, NTSC for
american/japanese NTSC-M models, OLD_NTSC for NTSC-M models with old video chip and DREAN for
argentinian PAL-N model. Default is PAL.
ForceC64Model=true|false
Force the configured c64 model even if the tune specifies one.
SidModel=<MOS6581|MOS8580>
Default SID chip model, old MOS 6581 or newer MOS 8580.
ForceSidModel=true|false
Force the configured SID chip model even if the tune specifies one.
UseFilter=true|false
Enable/disable the emulation of the SID filter.
FilterBias=<number>
Controls the filter bias in the ReSID emulation. The bias is given in millivolts, and a maximum
reasonable control range is approximately -500 to 500, the default value is 0.
FilterCurve6581=<number>
Controls the filter curve for the 6581 model in the ReSIDfp emulation. Ranges from 0.0 (light) to
1.0 (dark), the default value is 0.5.
FilterCurve8580=<number>
Controls the filter curve for the 8580 model in the ReSIDfp emulation. Value is expressed in Hertz
and the default is 12500.
SEE ALSO
sidplayfp(1)
AUTHORS
Leandro Nini
Current maintainer.
Simon White
Wrote the original Sidplay2.
Dag Lem
Wrote the reSID emulation engine.
Antti S. Lankila
Wrote the reSIDfp emulation engine as a fork of reSID 0.16.
The Vice team
Large part of the emulation is based on the VICE's code.
Andre Fachat
Wrote the original reloc65 utility.
Michael Schwendt
Wrote the original SidTune library and MD5 class (based on work by L. Peter Deutsch).
Mikko Kilponen
Wrote the originla man page.
RESOURCES
SourceForge project: <http://sourceforge.net/projects/sidplay-residfp/>
Sidplay2 homepage: <http://sidplay2.sourceforge.net/>
High Voltage Sid Collection (HVSC): <http://hvsc.c64.org/>
COPYING
Copyright (C) 2000-2004 Simon White
Copyright (C) 2007-2010 Antti Lankila
Copyright (C) 2009-2015 VICE Project
Copyright (C) 2010-2016 Leandro Nini
This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even
the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write
to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
perl v5.20.3 2016-01-05 SIDPLAYFP.INI(5)