Provided by: tworld-data_1.3.2-3_all 
NAME
c4 - Chip's Challenge combined converter
SYNOPSIS
c4 [-INTYPE] INFILENAME [-OUTTYPE] OUTFILENAME
c4 allows one to translate between the several different types of files used to represent level sets for
the game Chip's Challenge.
c4 expects there to be two files named on the command-line. c4 reads the levels stored in the first file,
and then writes the levels out to the second file. The format to use with each file usually can be
inferred by c4 by examining the filenames. If not, then it may be necessary to use switches before one or
both filenames to indicate their type.
There are four different types of files that c4 understands.
-D MS data file (*.dat).
This is the file type used by Chip's Challenge for Microsoft Windows 3.x. It is the file type used by
most other programs, such as ChipEdit and Tile World.
-R Lynx ROM file (*.lnx, *.lyx)
This "file type" is actually just a ROM image of the original Chip's Challenge for the Atari Lynx
handheld. It is used by Lynx emulators such as Handy.
-P MS-DOS fileset (directory of *.pak files)
This is the format used by the MS-DOS port of Chip's Challenge. In this case, the filename given on the
command line actually names a directory, containing *.pak files.
-T textual source file (*.txt)
This file type is native to c4. It is a plain text file, which allows levels to be defined pictorially
using a simple text editor. A complete description of the syntax of these files is provided below.
EXAMPLES
c4 mylevels.txt mylevels.dat
Create a .dat file from a textual source file.
c4 -P levels -D doslevels.dat
"levels" is a directory of MS-DOS *.pak files. c4 translates the directory contents into a single .dat
file. Note that the switches in this example are optional, as c4 would be able to infer the desired
formats.
c4 mylevels.dat chipsch.lnx
Embed the levels from the .dat file into a Lynx ROM file. Note that c4 does NOT create chipsch.lnx. You
must provide the ROM image file, which c4 then alters to contain your levels. (Obviously, you should not
use this command on your master copy of the ROM file.)
c4 chipsch.lnx -T out
Output the levels in the .dat file as a text file. Here the -T switch is needed to indicate that a text
file is the desired output format.
When producing a text file, c4 will attempt to produce legible source, but the results will often not be
as good as what a human being would produce. (In particular, c4 cannot draw overlays.)
NOTES
Be aware that there can be various problems when translating a set of levels using the MS ruleset to one
of the Lynx-only file formats. There are numerous objects and configurations in the MS ruleset which
cannot be represented in the Lynx ruleset. Usually c4 will display a warning when some aspect of the data
could not be transferred intact because of this.
The remainder of this documentation describes the syntax of the textual source file format.
LAYOUT OF THE INPUT FILE
The source file is broken up into subsections. Each subsection defines a separate level in the set.
The subsections are separated from each other by a line containing three percent signs:
%%%
A line of three percent signs also comes before the first level and after the last level, at the end of
the source file.
Any other line that begins with a percent sign is treated as a comment, and its contents are ignored.
Beyond these things, the source file consists of statements. Statements generally appear as a single
line of text. Some statements, however, require multiple lines. These multi-line statements are
terminated with the word end appearing alone on a line.
INPUT FILE HEADER STATEMENTS
There are a couple of statements that can appear at the very top of the source file, before the first
level subsection.
ruleset [ lynx | ms ]
The ruleset statement is the most important of these. It defines the ruleset for the level set. If the
ruleset statment is absent, it defaults to lynx.
maxlevel NNN
The maxlevel statement specifies the number of the last level in the .dat file. By default, this value is
provided automatically and does not need to be specified.
In addition to the above, a set of tile definitions can appear in the header area. See below for a full
description of the tiles multi-line statement. Any tile definitions provided here remain in force
throughout the file.
INPUT FILE LEVEL STATEMENTS
Within each level's subsection, the following two statments will usually appear at the top.
title STRING
password PASS
The title statement supplies the level's title, or name. The title string can be surrounded by double
quotes, or unadorned. The password statement supplies the level's password. This password must consist of
exactly four uppercase alphabetic characters.
If the level's number is 150 or less, the password statement may be omitted. In that case the level's
password will default to match that level in the original Lynx set. (N.B.: The Lynx ROM file format does
not provide a mechanism for setting passwords, so in that case the default password will be used
regardless.)
The following statements may also appear in a level subsection.
chips NNN
The chips statement defines how many chips are required on this level to open the chip socket. The
default value is zero.
time NNN
The time statement defines how many seconds are on the level's clock. The default value is zero (i.e., no
time limit).
hint STRING
The hint statement defines the level's hint text. As with the title statement, the string can either be
unadorned or delimited with double quotes. If a section contains multiple hint statements, the texts are
appended together, e.g.:
hint This is a relatively long hint, and so it
hint is helpful to be able to break it up across
hint several lines.
Note that the same can be done with title statements.
tiles
DEF1
DEF2
...
end
The tiles multi-line statement introduces one or more tile definitions. The definitions appear one per
line, until a line containing end is found. Note that the tile definitions given here only apply to the
current level. A complete description of tile definitions is given below.
map [ X Y ] map [ X Y ]
LINE1 LINE1
LINE2 LINE2
... ...
and end
OVER1
OVER2
...
end
The map statement defines the actual contents of (part of) the level's map. The line containing the map
statement can optionally include a pair of coordinates; these coordinates indicate where the the section
will be located on the level's map. If coordinates are omitted, the defined section will be located at (0
0) -- i.e., the upper-left corner of the level. The lines inside the map statement pictorially define the
contents of the map section, until a line containing and or end is encountered. When the map is
terminated by and, then the lines defining the map section are immediately followed by lines defining an
overlay. The overlay uses the same origin as the map section (though it is permissible for the overlay to
be smaller than the map section it is paired with). A complete description of the map and overlay
sections is given below.
border TL
The border statement specifies a tile. The edges of the map are then changed to contain this tile.
Typically this is used to enclose the level in walls.
The following statements are also available, though they are usually not needed. They provide means for
explicitly defining level data, for the occasional situation where the usual methods are more cumbersome.
creatures X1 Y1 ; X2 Y2 ...
The creatures statements permits explicit naming of the coordinates in the creature list. Pairs of
coordinates are separated from each other by semicolons; any number of coordinate pairs can be specified.
There can be multiple creatures statements in a level's subsection.
traps P1 Q1 -> R1 S1 ; P2 Q2 -> R2 S2 ...
The traps statement permits explicit naming of the coordinates for elements in the bear trap list.
Coordinates are given in one or more groups of four, separated by semicolons. Each group consists of the
x- and y-coordinates of the brown button, an arrow (->), and then the x- and y-coordinates of the bear
trap. Any number of traps statements can appear in a level's subsection.
cloners P1 Q1 -> R1 S1 ; P2 Q2 -> R2 S2 ...
The cloners statement permits explicit naming of elements in the clone machine list. It uses the same
syntax as the traps statment, with the red button's coordinates preceding the coordinates of the clone
machine.
level NNN
The level statement defines the level's number. By default it is one more than the number of the prior
level.
field NN B01 B02 ...
The field statement allows fields to be directly specified and embedded in the .dat file. The first
argument specifies the field number; the remaining arguments provide the byte values for the actual field
data. These statements are only meaningful in conjunction with producing a .dat file.
DEFINING TILES
A tile definition consists of two parts. The first part is either one or two characters. The characters
can be letters, numbers, punctuation -- anything except spaces. The second part is the name of a tile or
a pair of tiles. The characters then become that tile's representation.
Here is an example of some tile definitions:
tiles
# wall
* teleport
rb red button
@ chip south
end
(Note that a single tab character comes after the characters and before the tile names.) Once these
definitions have been provided, the newly-defined characters can then be used in a map.
The above definitions all use singular tiles. To define a pair of tiles, combine the two names with a
plus sign, like so:
tiles
X block + bomb
G glider north + clone machine
end
Notice that the top tile is named first, then the bottom tile.
The tiles statement is the only statement that can appear in the header, as well as in a level's
subsection. Tile definitions in the header are global, and can be used in every subsection. Tile
definitions inside a subsection are local, and apply only to that level.
A number of tile definitions are pre-set ahead of time, supplying standard representations for some of
the most common tiles. (If these representations are not desired, the characters can always be
redefined.) Here are some of the built-in definitions:
# wall $ computer chip
, water H socket
= ice E exit
& fire [] block
6 bomb ? hint button
See below for the complete list of tile names and built-in definitions.
A few groups tiles allow one to specify multiple definitions in a single line. For example:
tiles
G glider
end
This one definition is equivalent to the following:
tiles
Gn glider north
Gs glider south
Ge glider east
Gw glider west
end
(Note that "G" by itself is still undefined.) All creatures, including Chip, can be defined using this
abbreviated form.
Doors and keys are the other groups that have this feature; the following definition:
tiles
D door
end
is equivalent to:
tiles
Dr red door
Db blue door
Dy yellow door
Dg green door
end
MAP SECTIONS
Once all the needed tiles have defined representations, using the map statement is a simple matter. Here
is an example:
map
# # # # # #
# & & # # #
[] H E #
# & $ # # #
# # # # # #
end
This is a map of a small room. A block stands in the way of the entrance. Three of the four corners
contain fire; the fourth contains a chip. On the east wall is an exit guarded by a chip socket.
Note that each cell in the map is two characters wide. (Thus, for example, the octothorpes describe a
solid wall around the room.)
Here is a larger example, which presents the map from LESSON 2:
tiles
B bug north
C chip south
end
map 7 7
# # # # # # #
# $ #
# #
# # # # # # # # # # # #
# # # # B , , $ #
# E H # # B , , [][]C ? #
# # # # B , , $ #
# # # # # # # # # # # #
# #
# $ #
# # # # # # #
end
There are a couple of different ways to fill a cell with two tiles. The first way is to simply use tile
definitions which contains two tiles:
tiles
X block + bomb
G glider east + clone machine
end
map 12 14
# #
6 E #
# # X
G
end
The second way is to squeeze two representations into a single cell. Obviously, this can only be done
with both representations are a single character.
tiles
[ block
G glider east
+ clone machine
end
map 12 14
# #
6 E #
# # [6
G+
end
In both cases, the top tile always comes before the bottom tile. Note that you can "bury" a tile by
placing it to the right of a space:
map
# # # # # #
6 6 6E #
# # # # # #
end
Any number of map statements can appear in a level's subsection. The map statements will be combined
together to make the complete map.
OVERLAY SECTIONS
Every map statement can optionally include an overlay section. This overlay permits button connections
and monster ordering to be defined.
The overlay is applied to the same position as the map section it accompanies. The overlay can duplicate
parts of the map section it covers, and any such duplication will be ignored. The only characters in the
overlay that are significant are the ones that differ from the map section it covers. These characters
are treated as labels. Labels are always a single character; two non-space characters in a cell always
indicates two separate labels. Any non-space characters can be used as labels, as long as they don't
match up with the map.
An overlay section defines a button connection by using the same label in two (or more) cells. One of the
labelled cells will contain either a bear trap or a clone machine, and the other will contain the
appropriate button. If there are more than two cells with the same label, all but one should contain a
button.
Characters that only appear once in an overlay, on the other hand, indicate creatures. The characters
then indicate the ordering of the creatures in the creature list with respect to each other. The ordering
of characters is the usual ASCII sequence (e.g., numbers first, then capital letters, then lowercase
letters).
For example, here is a map with an overlay that demonstrates all three of these uses:
tiles
G glider east
+ clone machine
r red button
* beartrap
b brown button
end
map
G v #
G+ * r * G+ b & # r
G+ * r # # r
# > b b G < # #
and
2 v #
A c C d C d & # A
B a C # # B
# > a c 1 < # #
end
In this example, capitals are used for the clone machine connections, lowercase for the bear trap
connections, and numbers are used for the creature ordering.
(Note that the gliders atop clone machines are not numbered. While it is not an error to include clone
machine creatures in the ordering, they are ignored under the MS ruleset.)
It is not necessary to reproduce any of the map section's text in the overlay section. Blanks can be used
instead. The ignoring of matching text is simply a feature designed to assist the user in keeping the
overlay's contents properly aligned.
The traps, cloners, and creatures statements can be used in lieu of, or in conjunction with, data from
overlay sections. In the case of the creature list, items are added to the list in the order that they
are encountered in the source text.
If a level contains no overlay information and none of the above three statements, then this information
will be filled in automatically. The data will be determined by following the original Lynx-based rules
-- viz., buttons are connected to the next beartrap/clone machine in reading order, wrapping around to
the top if necessary. (Likewise, the creature ordering is just the order of the creatures in their
initial placement, modified by swapping the first creature with Chip.) Thus, if you actually want to
force an empty bear trap list, clone machine list, or creature list, you must include an empty traps,
cloners, and/or creatures statement.
TILE NAMES
Here is the complete list of tiles as they are named in definitions. Two or more names appearing on the
same line indicates that they are two different names for the same tile. Note that the tile names are not
case-sensitive; capitalization is ignored.
empty
wall
water
fire
dirt
ice
gravel
computer chip ic chip
socket
exit
ice corner southeast ice se
ice corner southwest ice sw
ice corner northwest ice nw
ice corner northeast ice ne
force floor north force north
force floor south force south
force floor east force east
force floor west force west
force floor random force random force any
hidden wall permanent invisible wall permanent
hidden wall temporary invisible wall temporary
wall north partition north
wall south partition south
wall east partition east
wall west partition west
wall southeast partition southeast wall se
closed toggle wall closed toggle door toggle closed
open toggle wall open toggle door toggle open
blue door door blue
red door door red
green door door green
yellow door door yellow
blue key key blue
red key key red
green key key green
yellow key key yellow
blue button button blue tank button
red button button red clone button
green button button green toggle button
brown button button brown trap button
blue block floor blue wall fake
blue block wall blue wall real
thief
teleport
bomb
beartrap trap
popup wall
hint button
clone machine cloner
water boots water shield flippers
fire boots fire shield
ice boots spiked shoes skates
force boots magnet suction boots
block moveable block
cloning block north block north
cloning block south block south
cloning block east block east
cloning block west block west
chip north
chip south
chip east
chip west
ball north
tank north
bug north bee north
paramecium north centipede north
fireball north flame north
glider north ghost north
blob north
walker north dumbbell north
teeth north frog north
(The last nine lines, listing the creatures, only show the north-facing versions. The remaining 27 names,
for the south-, east-, and west-facing versions, follow the obvious patttern.)
Note that tile names may be abbreviated to any unique prefix. In particular, this permits one to write
names like "glider north" as simply "glider n".
There are also tile names for the "extra" MS tiles. These tiles are listed in parentheses, as an
indicator that they were not originally intended to be used in maps.
(combination)
(chip drowned)
(chip burned)
(chip bombed)
(unused 1)
(unused 2)
(unused 3)
(exiting)
(exit 1)
(exit 2)
(chip swimming north) (chip swimming n)
(chip swimming west) (chip swimming w)
(chip swimming south) (chip swimming s)
(chip swimming east) (chip swimming e)
Finally, note that one can also explicitly refer to tiles by their hexadecimal byte value under the MS
rules by using the "0x" prefix. Thus, the names "0x2A" and "bomb" are equivalent.
PREDEFINED TILE DEFINITIONS
The following is the complete list of built-in tile definitions:
# wall E exit
$ ic chip H socket
, water = ice
& fire 6 bomb
; dirt : gravel
~ wall north ^ force floor north
_ wall south v force floor south
| wall west < force floor west
| wall east > force floor east
_| wall southeast <> force floor random
? hint button @ chip south
[] block [ block
^] cloning block north + clone machine
<] cloning block west + clone machine
v] cloning block south + clone machine
>] cloning block east + clone machine
LICENSE
c4, Copyright (C) 2003-2006 Brian Raiter <breadbox@muppetlabs.com> Permission is hereby granted, free of charge, to any person obtaining a copy of this software and documentation (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.