Provided by: arptables_0.0.3.4-1build1_amd64 
NAME
arptables - ARP table administration
SYNOPSIS
arptables [-t table] -[AD] chain rule-specification [options]
arptables [-t table] -[RI] chain rulenum rule-specification [options]
arptables [-t table] -D chain rulenum [options]
arptables [-t table] -[LFZ] [chain] [options]
arptables [-t table] -[NX] chain
arptables [-t table] -E old-chain-name new-chain-name
arptables [-t table] -P chain target [options]
DESCRIPTION
arptables is a user space tool, it is used to set up and maintain the tables of ARP rules
in the Linux kernel. These rules inspect the ARP frames which they see. arptables is
analogous to the iptables user space tool, but arptables is less complicated.
CHAINS
The kernel table is used to divide functionality into different sets of rules. Each set of
rules is called a chain. Each chain is an ordered list of rules that can match ARP
frames. If a rule matches an ARP frame, then a processing specification tells what to do
with that matching frame. The processing specification is called a 'target'. However, if
the frame does not match the current rule in the chain, then the next rule in the chain is
examined and so forth. The user can create new (user-defined) chains which can be used as
the 'target' of a rule.
TARGETS
A firewall rule specifies criteria for an ARP frame and a frame processing specification
called a target. When a frame matches a rule, then the next action performed by the
kernel is specified by the target. The target can be one of these values: ACCEPT, DROP,
CONTINUE, RETURN, an 'extension' (see below) or a user-defined chain.
ACCEPT means to let the frame through. DROP means the frame has to be dropped. CONTINUE
means the next rule has to be checked. This can be handy to know how many frames pass a
certain point in the chain or to log those frames. RETURN means stop traversing this
chain and resume at the next rule in the previous (calling) chain. For the extension
targets please see the TARGET EXTENSIONS section of this man page.
TABLES
There is only one ARP table in the Linux kernel. The table is filter. You can drop the
'-t filter' argument to the arptables command. The -t argument must be the first argument
on the arptables command line, if used.
-t, --table
filter, is the only table and contains two (Linux kernels 2.4.X) or three (Linux
kernels 2.6.0 and later) built-in chains: INPUT (for frames destined for the host),
OUTPUT (for locally-generated frames) and FORWARD (for frames being forwarded by
the bridge code). The FORWARD chain doesn't exist in Linux 2.4.X kernels.
ARPTABLES COMMAND LINE ARGUMENTS
After the initial arptables command line argument, the remaining arguments can be divided
into several different groups. These groups are commands, miscellaneous commands, rule-
specifications, match-extensions, and watcher-extensions.
COMMANDS
The arptables command arguments specify the actions to perform on the table defined with
the -t argument. If you do not use the -t argument to name a table, the commands apply to
the default filter table. With the exception of the -Z command, only one command may be
used on the command line at a time.
-A, --append
Append a rule to the end of the selected chain.
-D, --delete
Delete the specified rule from the selected chain. There are two ways to use this
command. The first is by specifying an interval of rule numbers to delete, syntax:
start_nr[:end_nr]. Using negative numbers is allowed, for more details about using
negative numbers, see the -I command. The second usage is by specifying the
complete rule as it would have been specified when it was added.
-I, --insert
Insert the specified rule into the selected chain at the specified rule number. If
the current number of rules equals N, then the specified number can be between -N
and N+1. For a positive number i, it holds that i and i-N-1 specify the same place
in the chain where the rule should be inserted. The number 0 specifies the place
past the last rule in the chain and using this number is therefore equivalent with
using the -A command.
-R, --replace
Replaces the specified rule into the selected chain at the specified rule number.
If the current number of rules equals N, then the specified number can be between 1
and N. i specifies the place in the chain where the rule should be replaced.
-P, --policy
Set the policy for the chain to the given target. The policy can be ACCEPT, DROP or
RETURN.
-F, --flush
Flush the selected chain. If no chain is selected, then every chain will be
flushed. Flushing the chain does not change the policy of the chain, however.
-Z, --zero
Set the counters of the selected chain to zero. If no chain is selected, all the
counters are set to zero. The -Z command can be used in conjunction with the -L
command. When both the -Z and -L commands are used together in this way, the rule
counters are printed on the screen before they are set to zero.
-L, --list
List all rules in the selected chain. If no chain is selected, all chains are
listed.
-N, --new-chain
Create a new user-defined chain with the given name. The number of user-defined
chains is unlimited. A user-defined chain name has maximum length of 31 characters.
-X, --delete-chain
Delete the specified user-defined chain. There must be no remaining references to
the specified chain, otherwise arptables will refuse to delete it. If no chain is
specified, all user-defined chains that aren't referenced will be removed.
-E, --rename-chain
Rename the specified chain to a new name. Besides renaming a user-defined chain,
you may rename a standard chain name to a name that suits your taste. For example,
if you like PREBRIDGING more than PREROUTING, then you can use the -E command to
rename the PREROUTING chain. If you do rename one of the standard arptables chain
names, please be sure to mention this fact should you post a question on the
arptables mailing lists. It would be wise to use the standard name in your post.
Renaming a standard arptables chain in this fashion has no effect on the structure
or function of the arptables kernel table.
MISCELLANOUS COMMANDS
-V, --version
Show the version of the arptables userspace program.
-h, --help
Give a brief description of the command syntax.
-j, --jump target
The target of the rule. This is one of the following values: ACCEPT, DROP,
CONTINUE, RETURN, a target extension (see TARGET EXTENSIONS) or a user-defined
chain name.
RULE-SPECIFICATIONS
The following command line arguments make up a rule specification (as used in the add and
delete commands). A "!" option before the specification inverts the test for that
specification. Apart from these standard rule specifications there are some other command
line arguments of interest.
-s, --source-ip [!] address[/mask]
The Source IP specification.
-d, --destination-ip [!] address[/mask]
The Destination IP specification.
--source-mac [!] address[/mask]
The source mac address. Both mask and address are written as 6 hexadecimal numbers
separated by colons.
--destination-mac [!] address[/mask]
The destination mac address. Both mask and address are written as 6 hexadecimal
numbers separated by colons.
-i, --in-interface [!] name
The interface via which a frame is received (for the INPUT and FORWARD chains). The
flag --in-if is an alias for this option.
-o, --out-interface [!] name
The interface via which a frame is going to be sent (for the OUTPUT and FORWARD
chains). The flag --out-if is an alias for this option.
-l, --h-length length[/mask]
The hardware length (nr of bytes)
--opcode code[/mask]
The operation code (2 bytes). Available values are: 1=Request 2=Reply
3=Request_Reverse 4=Reply_Reverse 5=DRARP_Request 6=DRARP_Reply 7=DRARP_Error
8=InARP_Request 9=ARP_NAK.
--h-type type[/mask]
The hardware type (2 bytes, hexadecimal). Available values are: 1=Ethernet.
--proto-type type[/mask]
The protocol type (2 bytes). Available values are: 0x800=IPv4.
TARGET-EXTENSIONS
arptables extensions are precompiled into the userspace tool. So there is no need to
explicitly load them with a -m option like in iptables. However, these extensions deal
with functionality supported by supplemental kernel modules.
mangle
--mangle-ip-s IP address
Mangles Source IP Address to given value.
--mangle-ip-d IP address
Mangles Destination IP Address to given value.
--mangle-mac-s MAC address
Mangles Source MAC Address to given value.
--mangle-mac-d MAC address
Mangles Destination MAC Address to given value.
--mangle-target target
Target of ARP mangle operation (DROP, CONTINUE or ACCEPT -- default is ACCEPT).
MAILINGLISTS
ebtables-user@lists.sourceforge.net
ebtables-devel@lists.sourceforge.net
SEE ALSO
iptables(8), ebtables(8), arp(8), rarp(8), ifconfig(8), route(8)
August 2007 ARPTABLES(8)