Provided by: chiark-scripts_5.0.2_all 
NAME
chiark-named-conf - check and generate nameserver configuration
SYNOPSIS
chiark-named-conf [options] -n|-y|-f
chiark-named-conf [options] zone ...
DESCRIPTION
chiark-named-conf is a tool for managing nameserver configurations and checking for suspected DNS
problems. Its main functions are to check that delegations are appropriate and working, that secondary
zones are slaved from the right places, and to generate a configuration for BIND, from its own input
file.
By default, for each zone, in addition to any warnings, the output lists the zone's configuration type.
If the zone is checked, the serial number at each of the nameservers is shown, with any unpublished
primary having * after the serial number.
OPTIONS
MODE OPTIONS
If one of the options -n, -y, or -f is supplied then chiark-named-conf will read its main configuration
file for the list of relevant zones. It will then check the configuration and delegation for each zone
and/or generate and install a new configuration file for the nameserver:
-y|--yes
Generate and install new nameserver config, as well as checking configuration, for all listed
zones.
-n|--no
Check configuration, for all listed zones, but do not generate new nameserver config.
-f|--force
Generate and install new nameserver config, without doing any configuration cross-checking.
(Syntax errors in our input configuration will still abort this operation.)
--nothing
Do nothing: do no checks, and don't write a new config. This can be used to get a list of the
zones being processed.
--mail-first | --mail-middle | --mail-final
Send mails to zone SOA MNAMEs reporting zones with problems. You must call chiark-named-conf at
least twice, once with --mail-first, and later with --mail-final, and preferably with one or more
calls to --mail-middle in between. All three options carry out a check and store the results;
--mail-final also sends a mail to the zone SOA MNAME or local administrator, if too many of the
calls had errors or warnings (calls before the most recent --mail-first being ignored).
-mail-final-test
just like --mail-final except that it always sends mail to the local server admin and never to
remote zone contacts, adding (testing!) to the start of the To: field.
Alternatively, one or more zone names may be supplied as arguments, in which case their delegations will
be checked, and compared with the data for that zone in the main configuration (if any). In this case no
new configuration file for the nameserver will be made.
ADDITIONAL OPTIONS
-A|--all
Checks even zones known to be broken. Ie, ignores the ? zone style modifier in the
configuration.
-C|--config config-file
Use config-file instead of /etc/bind/chiark-conf-gen.zones. Also changes the default directory.
-D Enables debugging. Useful for debugging chiark-named-conf, but probably not useful for debugging
your DNS configuration. Repeat to increase the debugging level. (Maximum is -DD.)
-g|--glueless
Do not warn about glueless referrals (strictly, makes the zone style modifier ~ the default). Not
recommended - see the section GLUELESSNESS, below.
-l|--local
Only checks for mistakes which are the responsibility of the local administrator (to fix or get
fixed). This means that for published and stealth zones we only check that we're slaving from the
right place and that any names and addresses for ourself are right. For primary zones all checks
are still done. It is a mistake to specify -l with foreign zones (zones supplied explictly on the
command line but not relevant to the local server); doing so produces a warning.
-mgroup!*$@~?
Overrides a modifiers directive in the configuration file. The modifiers specified in the
directive are completely replaced by those specified in this command line option. (Note that
modifiers specified in per-zone directives still override these per-group settings.) If more than
one modifiers directive specifies the same group, they are all affected. modifiers directives
which don't specify a group cannot be affected. It is an error if the group does not appear in
the config file. See ZONE STYLE MODIFIERS, below.
The special group foreign is used for zones which don't appear in the configuration file.
-q|--quiet
Suppress the usual report of the list of nameservers for each zone and the serial number from
each. When specified twice, do not print any information except warnings.
-r|--repeat
When a problem is detected, warn for all sources of the same imperfect data, rather than only the
first we come across
-v|--verbose
Print additional information about what is being checked, as we go along.
USAGE
The file /etc/bind/chiark-conf-gen.zones (or other file specified with the -C option) contains a sequence
of directives, one per line. Blank lines are permitted. Leading and trailing whitespace on each line is
ignored. Comments are lines starting with #. Ending a line with a .ft R joins it to the next line, so
that long directives can be split across several physical lines.
GENERAL DIRECTIVES
These directives specify general configuration details. They should appear before directives specifying
zones, as each will affect only later zone directives. Foreign zones (zones explicitly specified on the
command line but not mentioned in the configuration) use the configuration settings prevailing at the end
of the config file.
admin email-address
Specifies the email address of the local administrator. This is used in the From: line of mails
sent out, and will also receive copies of the reports. There is no default.
default-dir directory
Makes directory be the default directory (which affects the interpretation of relative filenames).
The default is the directory containing the main configuration file, ie /etc/bind if no -C option
is specified.
forbid-addr [ip-address ...]
Specifies the list of addresses that are forbidden as any nameserver for any zone. The default is
no such addresses.
forbid-addr [ip-address ...]
Specifies the list of addresses that are forbidden as a nameserver for a zone for which we are the
primary - ie, the list of our old or to-be-obsoleted slaves. The default is no such addresses.
serverless-glueless domain ...
Specifies a list of domains under which we do not expect to find any nameservers without glue; for
these zones it is OK to find glueless referrals. Each domain listed names a complete subtree of
the DNS, starting at the named point. The default is in-addr.arpa ip6.arpa ip6.int.
To avoid indefinitely long or even circularly glueless referrals (which delay or prevent lookups)
it is necessary for all sites to effectively implement similar conventions; currently the author
believes that only the reverse lookup namespaces are conventionally devoid of (glueless)
nameservers, and therefore fine to provide glueless referrals for. See GLUELESSNESS below.
allow--indirect-glue nameserver-superdomain ...
Specifies a list of domains under which we expect to find glueless nameservers, with up to one
layer of indirection. For nameservers under these domains it is OK to to find glueless referrals,
but only when listed as a nameserver for a zone which is not itself a subdomain of an allow-
indirect-glue nameserver-superdomain.
This supports to common configuration style where DNS operator(s) set up all of their nameservers
with names within a small subsection of the DNS (the portions under nameserver-superdomains), and
provide glueless referrals naming these nameservers for all other zones. This provides at most
one level of missing glue.
Note that if the DNS administrators collectively able to influence the service for some zone
(including the admins for its superzones, the zones containing its nameservers, and their
superzones and so forth) are not in sufficiently close communication do not all agree on the
proper set of nameserver-superdomain then they might still set up circular glue and chiark-named-
conf would not necessarily be able to detect this even if it was run on every relevant nameserver.
mail-state-dir directory
Uses directory for storing information about recent failures for mailing to zone admins. See
--mail-first et al. Old files in here should be cleaned up periodically out of cron. There is no
default.
mail-max-warnfreq percentage
When --mail-final is used, a mail will be sent to all zones which had warnings or errors more than
percentage% of the times --mail-* was used (since the last --mail-first). The default is 50%.
modifiers !*$@~?] [group]
Applies the specified zone style modifiers (see below) to subsequently declared zones (until the
next modifiers directive), as if the modifiers specified were written out for each zone. You must
specify at least one character for the modifiers; if you want to reset everything to the default,
just say !. If style modifiers specified in the zone directive conflict with the modifiers
directive, those specified in the zone directive take effect. group may contain alphanumerics and
underscores, and is used for the -m command-line option.
self-addr ip-address ...
Specifies the list of addresses that this server may be known by in A records. There is no
default.
output format filename [format filename ...]
Arranges that each filename will be overwritten when -y or -f are used; its new contents will be
configuration directives for the zones which follow for the nameserver in question. Currently the
only format supported is bind8 which indicates new-style BIND 8. If no zones follow, then each
file will still be overwritten, by an effectively empty file. Default: if there is no output
directive in the configuration then the default is to use bind8 chiark-conf-gen.bind8; otherwise
it is an error for there to be any zones in the configuration before the first output directive.
self-ns fqdn ...
Specifies the list of names that this server may be known by in NS records. There is no default.
Any trailing * is replaced by the name of the zone being checked, so for example self-ns isp.ns.*
before the zone example.com would mean to expect us to be listed as isp.ns.example.com in the NS
RRset.
self-soa fqdn ...
Specifies the list of names that this server may be known by in the ORIGIN field of SOA records.
There is no default. Any trailing * is replaced by the name of the zone, as for self-ns.
self fqdn ...
Equivalent to both self-ns and self-soa with the same set of names.
slave-dir directory [[prefix] suffix]
Specifies the directory in which slave (published and stealth) zonefiles should be placed. The
default directory is /var/cache/bind/chiark-slave. The default suffix and prefix are empty; they
also will be reset to these defaults by a slave-dir directive which does not specify them.
ZONE DIRECTIVES
These directives specify one or more zones.
primary[!*$@~?] zone filename
Specifies that this server is supposed to be the primary nameserver for zone and that the zone
data is to be found in filename.
primary-dir[!*$@~?] directory[/prefix] [suffix[/subfile]]
Search directory for files whose names start with prefix and end with suffix. Each such file is
taken to represent a zone file for which this server is supposed to be the primary; the part of
the filename between prefix and suffix is the name of the zone.
If /subfile is specified, then instead of looking for files, we search for directories containing
subfile; directories which do not contain the subfile are simply skipped.
If directory[/prefix] exists as specified and is a directory then it is interpreted as directory
with an empty prefix; otherwise the final path component is assumed to be the prefix. If no
suffix/subfile is specified then the default is _db.
published[!*$@~?] zone origin-addr
Specifies that this server is supposed to be a published slave nameserver for the zone in
question.
stealth[!*$@~?] zone server-addr ...
Specifies that this server is supposed to be an unpublished secondary (aka stealth secondary) for
the zone in question.
ZONE STYLE MODIFIERS
Each of the zone directives may optionally be followed by one or more of the following characters (each
at most once):
! Reverses the meaning of all style modifiers after the !. Only one ! must appear in the modifier
list. In this list, other modifiers which default to `enabled' are described by describing the
effect of their inverse - see the description for !@ below.
* Indicates that the zone is unofficial, ie that it is not delegated as part of the global Internet
DNS and that no attempt should be made to find the superzone and check delegations. Note that
unofficial, local zones should be created with caution. They should be in parts of the namespace
which are reserved for private use, or belong to the actual zone maintainer.
$ Indicates that any mails should be sent about the zone to the nameserver admin rather than to the
zone SOA MNAME. This is the default unless we are supposedly a published server for the zone.
!@ Indicates that no mails should be sent about the zone to anyone.
~ Indicates that the zone's delegation is known to be glueless, and that lack of glue should not be
flagged. Not recommended - see the section GLUELESSNESS, below.
? Indicates that the zone is known to be broken and no checks should be carried out on it, unless
the -A option is specified.
OTHER DIRECTIVES
include file
Reads file as if it were included here.
end Ends processing of this file; any data beyond this point is ignored.
CHECKS
chiark-named-conf makes the following checks:
Delegations: Each delegation from a server for the superzone should contain the same set of nameservers.
None of the delegations should lack glue. The glue addresses should be the same in each delegation, and
agree with the local default nameserver.
Delegated servers: Each server mentioned in the delegation should have the same SOA record (and
obviously, should be authoritative).
All published nameservers - including delegated servers and servers named in the zone's nameserver set:
All nameservers for the zone should supply the same list of nameservers for the zone, and none of this
authority information should be glueless. All the glue should always give the same addresses.
Origin server's data: The set of nameservers in the origin server's version of the zone should be a
superset of those in the delegations.
Our zone configuration: For primary zones, the SOA origin should be one of the names specified with
self-soa (or self). For published zones, the address should be that of the SOA origin. For stealth
zones, the address should be that of the SOA origin or one of the published nameservers.
GLUELESSNESS
Glue is the name given for the addresses of nameservers which are often supplied in a referral. In fact,
it turns out that it is important for the reliability and performance of the DNS that referrals, in
general, always come with glue.
Firstly, glueless referrals usually cause extra delays looking up names. BIND 8, when it receives a
completely glueless referral and does not have the nameservers' addresses in its cache, will start
queries for the nameserver addresses; but it will throw the original client's question away, so that when
these queries arrive, it won't restart the query from where it left off. This means that the client
won't get its answer until it retries, typically at least 1 second later - longer if you have more than
one nameserver listed. Worse, if the nameserver to which the glueless referral points is itself under
another glueless referral, another retry will be required.
Even for better resolvers than BIND 8, long chains of glueless referrals can cause performance and
reliability problems, turning a simple two or three query exchange into something needing more than a
dozen queries.
Even worse, one might accidentally create a set of circularly glueless referrals such as
example.com NS ns0.example.net.uk
example.com NS ns1.example.net.uk
example.net.uk NS ns0.example.com
example.net.uk NS ns1.example.com
Here it is impossible to look up anything in either example.com or example.net.uk.
There are, as far as the author is aware, no generally agreed conventions or standards for avoiding
unreasonably long glueless chains, or even circular glueless situations. The only way to guarantee that
things will work properly is therefore to always supply glue.
However, the situation is further complicated by the fact that many implementations (including BIND
8.2.3, and many registry systems), will refuse to accept glue RRs for delegations in a parent zonefile
unless they are under the parent's zone apex. In these cases it can be necessary to create names for the
child's nameservers which are underneath the child's apex, so that the glue records are both in the
parent's bailiwick and obviously necessary.
In the past, the `shared registry system' managing .com, .net and .org did not allow a single IPv4
address to be used for more than one nameserver name. However, at the time of writing (October 2002)
this problem seems to have been fixed, and the workaround I previously recommended (creating a single
name for your nameserver somewhere in .com, .net or .org, and using that for all the delegations from
.com, .net and .org) should now be avoided.
Finally, a note about `reverse' zones, such as those in in-addr.arpa: It does not seem at all common
practice to create nameservers in in-addr.arpa zones (ie, no NS RRs seem to point into in-addr.arpa, even
those for in-addr.arpa zones). Current practice seems to be to always use nameservers for in-addr.arpa
which are in the normal, forward, address space. If everyone sticks to the rule of always publishing
nameservers names in the `main' part of the namespace, and publishing glue for them, there is no chance
of anything longer than a 1-step glueless chain might occur for a in-addr.arpa zone. It is probably best
to maintain this as the status quo, despite the performance problem this implies for BIND 8 caches. This
is what the serverless-glueless directive is for.
Dan Bernstein has some information and examples about this at
http://cr.yp.to/djbdns/notes.html#gluelessness ⟨http://cr.yp.to/djbdns/notes.html#gluelessness⟩ but be
warned that it is rather opinionated.
GLUELESSNESS SUMMARY
I recommend that every nameserver should have its own name in every forward zone that it serves. For
example:
zone.example.com NS servus.ns.example.com
servus.ns.example.com A 127.0.0.2
2.0.0.127.in-addr.arpa PTR servus.example.net
servus.example.net A 127.0.0.2
Domain names in in-addr.arpa should not be used in the right hand side of NS records.
SECURITY
chiark-named-conf is supposed to be resistant to malicious data in the DNS. It is not resistant to
malicious data in its own options, configuration file or environment. It is not supposed to read its
stdin, but is not guaranteed to be safe if stdin is dangerous.
Killing chiark-named-conf suddenly should be safe, even with -y or -f (though of course it may not
complete its task if killed), provided that only one invocation is made at once.
Slow remote nameservers will cause chiark-named-conf to take excessively long.
EXIT STATUS
0 All went well and there were no warnings.
any other
There were warnings or errors.
FILES
/etc/bind/chiark-conf-gen.zones
Default input configuration file. (Override with -C.)
/etc/bind
Default directory. (Override with -C or default-dir.)
dir/chiark-conf-gen.bind8
Default output file.
/var/cache/bind/chiark-slave
Default location for slave zones.
ENVIRONMENT
Setting variables used by dig(1) and adnshost(1) will affect the operation of chiark-named-conf. Avoid
messing with these if possible.
PATH is used to find subprograms such as dig and adnshost.
BUGS
The determination of the parent zone for each zone to be checked, and its nameservers, is done simply
using the system default nameserver.
The processing of output from dig is not very reliable or robust, but this is mainly the fault of dig.
This can lead to somewhat unhelpful error reporting for lookup failures.
AUTHOR
chiark-named-conf and this manpage were written by Ian Jackson <ian@chiark.greenend.org.uk>. They are
Copyright 2002 Ian Jackson.
chiark-named-conf and this manpage are free software; you can redistribute it and/or modify it under the
terms of the GNU General Public License as published by the Free Software Foundation; either version 2,
or (at your option) any later version.
This is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public
License for more details.
You should have received a copy of the GNU General Public License along with this program; if not,
consult the Free Software Foundation's website at www.fsf.org, or the GNU Project website at www.gnu.org.