Ubuntu Manpage: cryptsetup-reencrypt - tool for offline LUKS device re-encryption

Provided by: cryptsetup-bin_2.0.2-1ubuntu1.2_amd64

NAME

       cryptsetup-reencrypt - tool for offline LUKS device re-encryption

SYNOPSIS

       cryptsetup-reencrypt <options> <device>

DESCRIPTION

       Cryptsetup-reencrypt can be used to change reencryption parameters which otherwise require
       full on-disk data change (re-encryption).

       You can regenerate volume key (the real  key  used  in  on-disk  encryption  unclocked  by
       passphrase), cipher, cipher mode.

       Cryptsetup-reencrypt  reencrypts data on LUKS device in-place. During reencryption process
       the LUKS device is marked unavailable.

       WARNING: The cryptsetup-reencrypt program is not resistant to hardware or kernel  failures
       during reencryption (you can lose your data in this case).

       ALWAYS BE SURE YOU HAVE RELIABLE BACKUP BEFORE USING THIS TOOL.
       The  reencryption can be temporarily suspended (by TERM signal or by using ctrl+c) but you
       need  to  retain  temporary  files  named  LUKS-<uuid>.[log|org|new].   LUKS   device   is
       unavailable until reencryption is finished though.

       Current working directory must by writable and temporary files created during reencryption
       must be present.

       For more info about LUKS see cryptsetup(8).

OPTIONS

To start (or continue) re-encryption for <device> use:

cryptsetup-reencrypt <device>

<options> can be [--batch-mode, --block-size, --cipher | --keep-key, --debug, --device-
size, --hash, --iter-time | --pbkdf-force-iterations, --key-file, --key-size, --key-slot,
--keyfile-offset, --keyfile-size, --tries, --pbkdf, --pbkdf-memory, --pbkdf-parallel,
--progress-frequency, --use-directio, --use-random | --use-urandom, --use-fsync, --uuid,
--verbose, --write-log]

To encrypt data on (not yet encrypted) device, use --new with combination with --reduce-
device-size.

To remove encryption from device, use --decrypt.

For detailed description of encryption and key file options see cryptsetup(8) man page.

--batch-mode, -q
Suppresses all warnings and reencryption progress output.

--block-size, -B value
Use re-encryption block size of <value> in MiB.

Values can be between 1 and 64 MiB.

--cipher, -c <cipher-spec>
Set the cipher specification string.

--debug
Run in debug mode with full diagnostic logs. Debug output lines are always prefixed
by '#'.

--decrypt
Remove encryption (decrypt already encrypted device and remove LUKS header).

WARNING: This is destructive operation and cannot be reverted.

--device-size size[units]
Instead of real device size, use specified value.

It means that only specified area (from the start of the device to the specified
size) will be reencrypted.

If no unit suffix is specified, the size is in bytes.

Unit suffix can be S for 512 byte sectors, K/M/G/T (or KiB,MiB,GiB,TiB) for units
with 1024 base or KB/MB/GB/TB for 1000 base (SI scale).

WARNING: This is destructive operation.

--hash, -h <hash-spec>
Specifies the hash used in the LUKS1 key setup scheme and volume key digest.

NOTE: if this parameter is not specified, default hash algorithm is always used for
new LUKS1 device header.

NOTE: with LUKS2 format this option is only relevant when new keyslot pbkdf
algorithm is set to PBKDF2 (see --pbkdf).

--iter-time, -i <milliseconds>
The number of milliseconds to spend with PBKDF2 passphrase processing for the new
LUKS header.

--keep-key
Do not change encryption key, just reencrypt the LUKS header and keyslots.

This option can be combined only with --hash, --iter-time,
--pbkdf-force-iterations, --pbkdf (LUKS2 only), --pbkdf-memory (Argon2i/id and
LUKS2 only) and --pbkdf-parallel (Argon2i/id and LUKS2 only) options.

--key-file, -d name
Read the passphrase from file.

WARNING: --key-file option can be used only if there only one active keyslot, or
alternatively, also if --key-slot option is specified (then all other keyslots will
be disabled in new LUKS device).

If this option is not used, cryptsetup-reencrypt will ask for all active keyslot
passphrases.

--key-size, -s <bits>
Set key size in bits. The argument has to be a multiple of 8.

The possible key-sizes are limited by the cipher and mode used.

If you are increasing key size, there must be enough space in the LUKS header for
enlarged keyslots (data offset must be large enough) or reencryption cannot be
performed.

If there is not enough space for keyslots with new key size, you can destructively
shrink device with --reduce-device-size option.

--key-slot, -S <0-MAX>
Specify which key slot is used. For LUKS1, max keyslot number is 7. For LUKS2, it's
31.

WARNING: All other keyslots will be disabled if this option is used.

--keyfile-offset value
Skip value bytes at the beginning of the key file.

--keyfile-size, -l
Read a maximum of value bytes from the key file. Default is to read the whole file
up to the compiled-in maximum.

--new, -N
Create new header (encrypt not yet encrypted device).

This option must be used together with --reduce-device-size.

WARNING: This is destructive operation and cannot be reverted.

--pbkdf
Set Password-Based Key Derivation Function (PBKDF) algorithm for LUKS keyslot. The
PBKDF can be: pbkdf2, argon2i for Argon2i or argon2id for Argon2id.

For LUKS1, only pbkdf2 is accepted (no need to use this option).

--pbkdf-force-iterations <num>
Avoid PBKDF benchmark and set time cost (iterations) directly.

--pbkdf-memory <number>
Set the memory cost for PBKDF (for Argon2i/id the number represents kilobytes).
Note that it is maximal value, PBKDF benchmark or available physical memory can
decrease it. This option is not available for PBKDF2.

--pbkdf-parallel <number>
Set the parallel cost for PBKDF (number of threads, up to 4). Note that it is
maximal value, it is decreased automatically if CPU online count is lower. This
option is not available for PBKDF2.

--progress-frequency <seconds>
Print separate line every <seconds> with reencryption progress.

--reduce-device-size size[units]
Enlarge data offset to specified value by shrinking device size.

This means that last sectors on the original device will be lost, ciphertext data
will be effectively shifted by specified number of sectors.

It can be useful if you e.g. added some space to underlying partition (so last
sectors contains no data).

For units suffix see --device-size parameter description.

You cannot shrink device more than by 64 MiB (131072 sectors).

WARNING: This is destructive operation and cannot be reverted. Use with extreme
care - shrunk filesystems are usually unrecoverable.

--tries, -T
Number of retries for invalid passphrase entry.

--type <type>
Use only while encrypting not yet encrypted device (see --new).

Specify LUKS version when performing in-place encryption. If the parameter is
omitted default value (LUKS1) is used. Type may be one of: luks (default), luks1 or
luks2.

--use-directio
Use direct-io (O_DIRECT) for all read/write data operations related to block device
undergoing reencryption.

Useful if direct-io operations perform better than normal buffered operations (e.g.
in virtual environments).

--use-fsync
Use fsync call after every written block. This applies for reencryption log files
as well.

--use-random

--use-urandom
Define which kernel random number generator will be used to create the volume key.

--uuid <uuid>
Use only while resuming an interrupted decryption process (see --decrypt).

To find out what <uuid> to pass look for temporary files LUKS-<uuid>.[|log|org|new]
of the interrupted decryption process.

--verbose, -v
Print more information on command execution.

--version
Show the program version.

--write-log
Update log file after every block write. This can slow down reencryption but will
minimize data loss in the case of system crash.

RETURN CODES

       Cryptsetup-reencrypt returns 0 on success and a non-zero value on error.

       Error codes are: 1 wrong parameters, 2 no permission, 3 out  of  memory,  4  wrong  device
       specified, 5 device already exists or device is busy.

EXAMPLES

       Reencrypt /dev/sdb1 (change volume key)
              cryptsetup-reencrypt /dev/sdb1

       Reencrypt and also change cipher and cipher mode
              cryptsetup-reencrypt /dev/sdb1 -c aes-xts-plain64

       Add LUKS encryption to not yet encrypted device

              First, be sure you have space added to disk.

              Or alternatively shrink filesystem in advance.
              Here we need 4096 512-bytes sectors (enough for 2x128 bit key).

              fdisk  -u  /dev/sdb  #  move sdb1 partition end + 4096 sectors (or use resize2fs or
              tool for your filesystem and shrink it)

              cryptsetup-reencrypt /dev/sdb1 --new --reduce-device-size 4096S

       Remove LUKS encryption completely

              cryptsetup-reencrypt /dev/sdb1 --decrypt

REPORTING BUGS

       Report bugs, including ones in the documentation, on the cryptsetup mailing list  at  <dm-
       crypt@saout.de>  or  in the 'Issues' section on LUKS website.  Please attach the output of
       the failed command with the --debug option added.

AUTHORS

       Cryptsetup-reencrypt was written by Milan Broz <gmazyland@gmail.com>.

COPYRIGHT

       Copyright © 2012-2018 Milan Broz
       Copyright © 2012-2018 Red Hat, Inc.

       This is free software; see the source for copying conditions.  There is NO  warranty;  not
       even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.