Provided by: fence-agents_4.0.25-2ubuntu1.3_amd64 
NAME
fence_docker - Fence agent for Docker
DESCRIPTION
fence_docker is I/O fencing agent which can be used with the Docker Engine containers. You can use this
fence-agent without any authentication, or you can use TLS authentication (use --ssl option, more info
about TLS authentication in docker: http://docs.docker.com/examples/https/).
fence_docker accepts options on the command line as well as from stdin. Fenced sends parameters through
stdin when it execs the agent. fence_docker can be run by itself with command line options. This is
useful for testing and for turning outlets on or off from scripts.
Vendor URL: www.docker.io
PARAMETERS
-o, --action=[action]
Fencing action (Default Value: reboot)
-4, --inet4-only
Forces agent to use IPv4 addresses only
-6, --inet6-only
Forces agent to use IPv6 addresses only
-a, --ip=[ip]
IP address or hostname of fencing device This parameter is always required.
-u, --ipport=[port]
TCP/UDP port to use for connection with device (Default Value: 80)
-m, --method=[method]
Method to fence (onoff|cycle) (Default Value: onoff)
-n, --plug=[id]
Physical plug number on device, UUID or identification of machine This parameter is always
required.
-z, --ssl
Use SSL connection with verifying certificate
--ssl-insecure
Use SSL connection without verifying certificate
--ssl-secure
Use SSL connection with verifying certificate
--api-version
Version of Docker Remote API (default: 1.11) (Default Value: 1.11)
--tlscacert
Path to CA certificate (PEM format) for TLS authentication. Required if --ssl option is used.
--tlscert
Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.
--tlskey
Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.
-q, --quiet
Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.
-v, --verbose
Verbose mode
-D, --debug-file=[debugfile]
Write debug information to given file
-V, --version
Display version information and exit
-h, --help
Display help and exit
-C, --separator=[char]
Separator for CSV created by 'list' operation (Default Value: ,)
--delay=[seconds]
Wait X seconds before fencing is started (Default Value: 0)
--login-timeout=[seconds]
Wait X seconds for cmd prompt after login (Default Value: 5)
--power-timeout=[seconds]
Test X seconds for status change after ON/OFF (Default Value: 20)
--power-wait=[seconds]
Wait X seconds after issuing ON/OFF (Default Value: 0)
--shell-timeout=[seconds]
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
--retry-on=[attempts]
Count of attempts to retry power on (Default Value: 1)
--gnutlscli-path=[path]
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)
ACTIONS
on Power on machine.
off Power off machine.
reboot Reboot machine.
status This returns the status of the plug/virtual machine.
list List available plugs with aliases/virtual machines if there is support for more then one device.
Returns N/A otherwise.
list-status
List available plugs with aliases/virtual machines and their power state if it can be obtained
without additional commands.
monitor
Check the health of fence device
metadata
Display the XML metadata describing this resource.
validate-all
Validate if all required parameters are entered.
STDIN PARAMETERS
action Fencing action (Default Value: reboot)
inet4_only
Forces agent to use IPv4 addresses only
inet6_only
Forces agent to use IPv6 addresses only
ip IP address or hostname of fencing device This parameter is always required. Obsoletes: ipaddr
ipport TCP/UDP port to use for connection with device (Default Value: 80)
method Method to fence (onoff|cycle) (Default Value: onoff)
plug Physical plug number on device, UUID or identification of machine This parameter is always
required. Obsoletes: port
ssl Use SSL connection with verifying certificate
ssl_insecure
Use SSL connection without verifying certificate
ssl_secure
Use SSL connection with verifying certificate
api_version
Version of Docker Remote API (default: 1.11) (Default Value: 1.11)
tlscacert
Path to CA certificate (PEM format) for TLS authentication. Required if --ssl option is used.
tlscert
Path to client certificate (PEM format) for TLS authentication. Required if --ssl option is used.
tlskey Path to client key (PEM format) for TLS authentication. Required if --ssl option is used.
quiet Disable logging to stderr. Does not affect --verbose or --debug logging to syslog.
verbose
Verbose mode
debug_file
Write debug information to given file Obsoletes: debug
version
Display version information and exit
help Display help and exit
separator
Separator for CSV created by 'list' operation (Default Value: ,)
delay Wait X seconds before fencing is started (Default Value: 0)
login_timeout
Wait X seconds for cmd prompt after login (Default Value: 5)
power_timeout
Test X seconds for status change after ON/OFF (Default Value: 20)
power_wait
Wait X seconds after issuing ON/OFF (Default Value: 0)
shell_timeout
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
retry_on
Count of attempts to retry power on (Default Value: 1)
gnutlscli_path
Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)