NAME

       fence_ilo - Fence agent for HP iLO

       fence_ilo2 - Fence agent for HP iLO2 (symlink)

DESCRIPTION

       fence_ilo  is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO)
       PCI card.The agent opens an SSL connection to the iLO card. Once  the  SSL  connection  is
       established, the agent is able to communicate with the iLO card through an XML stream.

       fence_ilo  accepts  options  on  the  command  line  as  well  as from stdin. Fenced sends
       parameters through stdin when it execs the agent. fence_ilo can  be  run  by  itself  with
       command  line  options.  This is useful for testing and for turning outlets on or off from
       scripts.

       Vendor URL: http://www.hp.com

PARAMETERS

       -o, --action=[action]
              Fencing action (Default Value: reboot)

       -4, --inet4-only
              Forces agent to use IPv4 addresses only

       -6, --inet6-only
              Forces agent to use IPv6 addresses only

       -a, --ip=[ip]
              IP address or hostname of fencing device

       -u, --ipport=[port]
              TCP/UDP port to use for connection with device (Default Value: 443)

       -t, --notls
              Disable TLS negotiation and force SSL3.0. This should only be used for devices that
              do not support TLS1.0 and up.

       -p, --password=[password]
              Login password or passphrase

       -S, --password-script=[script]
              Script to run to retrieve password

       -n, --plug=[ip]
              IP  address  or hostname of fencing device (together with --port-as-ip)

       -r, --ribcl-version=[version]
              Force ribcl version to use

       -z, --ssl
              Use SSL connection with verifying certificate (Default Value: 1)

       --ssl-insecure
              Use SSL connection without verifying certificate

       --ssl-secure
              Use SSL connection with verifying certificate

       --tls1.0
              Disable TLS negotiation and force TLS1.0. This should only be used for devices that
              do not support TLS1.1 and up.

       -l, --username=[name]
              Login name This parameter is always required.

       -q, --quiet
              Disable  logging to stderr. Does not affect --verbose or --debug logging to syslog.

       -v, --verbose
              Verbose mode

       -D, --debug-file=[debugfile]
              Write debug information to given file

       -V, --version
              Display version information and exit

       -h, --help
              Display help and exit

       --delay=[seconds]
              Wait X seconds before fencing is started (Default Value: 0)

       --login-timeout=[seconds]
              Wait X seconds for cmd prompt after login (Default Value: 10)

       --port-as-ip
              Make "port/plug" to be an alias to IP address

       --power-timeout=[seconds]
              Test X seconds for status change after ON/OFF (Default Value: 20)

       --power-wait=[seconds]
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       --shell-timeout=[seconds]
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       --retry-on=[attempts]
              Count of attempts to retry power on (Default Value: 3)

       --gnutlscli-path=[path]
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)

ACTIONS

       on     Power on machine.

       off    Power off machine.

       reboot Reboot machine.

       status This returns the status of the plug/virtual machine.

       monitor
              Check the health of fence device

       metadata
              Display the XML metadata describing this resource.

       validate-all
              Validate if all required parameters are entered.

STDIN PARAMETERS

       action Fencing action (Default Value: reboot)

       inet4_only
              Forces agent to use IPv4 addresses only

       inet6_only
              Forces agent to use IPv6 addresses only

       ip     IP address or hostname of fencing device Obsoletes: ipaddr

       ipport TCP/UDP port to use for connection with device (Default Value: 443)

       notls  Disable TLS negotiation and force SSL3.0. This should only be used for devices that
              do not support TLS1.0 and up.

       password
              Login password or passphrase Obsoletes: passwd

       password_script
              Script to run to retrieve password Obsoletes: passwd_script

       plug   IP  address  or  hostname of fencing device (together with --port-as-ip) Obsoletes:
              port

       ribcl_version
              Force ribcl version to use Obsoletes: ribcl

       ssl    Use SSL connection with verifying certificate (Default Value: 1)

       ssl_insecure
              Use SSL connection without verifying certificate

       ssl_secure
              Use SSL connection with verifying certificate

       tls1.0 Disable TLS negotiation and force TLS1.0. This should only be used for devices that
              do not support TLS1.1 and up.

       username
              Login name This parameter is always required. Obsoletes: login

       quiet  Disable  logging to stderr. Does not affect --verbose or --debug logging to syslog.

       verbose
              Verbose mode

       debug_file
              Write debug information to given file Obsoletes: debug

       version
              Display version information and exit

       help   Display help and exit

       delay  Wait X seconds before fencing is started (Default Value: 0)

       login_timeout
              Wait X seconds for cmd prompt after login (Default Value: 10)

       port_as_ip
              Make "port/plug" to be an alias to IP address

       power_timeout
              Test X seconds for status change after ON/OFF (Default Value: 20)

       power_wait
              Wait X seconds after issuing ON/OFF (Default Value: 0)

       shell_timeout
              Wait X seconds for cmd prompt after issuing command (Default Value: 3)

       retry_on
              Count of attempts to retry power on (Default Value: 3)

       gnutlscli_path
              Path to gnutls-cli binary (Default Value: /usr/bin/gnutls-cli)