NAME

     plainrsa-gen — generator for Plain RSA keys

SYNOPSIS

     plainrsa-gen [-b bits] [-e pubexp] [-f outfile] [-h]

DESCRIPTION

     plainrsa-gen can be used to generate Plain RSA keys for authentication purposes.  Using Plain RSA keys is
     optional.  Other possibilities are Pre-shared keys or X.509 certificates.

     -b bits
             bit length of the key.  Default is 1024, recommended length is 2048 or even 4096 bits.  Note that
             generating longer keys takes longer time.

     -e pubexp
             value of RSA public exponent.  Default is 0x3.  Don't change this unless you really know what you
             are doing!

     -f outfile
             outfile instead of stdout.  If the file already exists it won't be overwritten.  You wouldn't like
             to lose your private key by accident, would you?

OUTPUT FILE FORMAT

     This is the secret private key that should never leave your computer:

     : RSA   {
             # RSA 1024 bits
             # pubkey=0sAQOrWlcwbAIdNSMhDt...
             Modulus: 0xab5a57306c021d3523...
             PublicExponent: 0x03
             PrivateExponent: 0x723c3a2048...
             Prime1: 0xd309b30e6adf9d85c01...
             Prime2: 0xcfdc2a8aa5b2b3c90e3...
             Exponent1: 0x8cb122099c9513ae...
             Exponent2: 0x8a92c7071921cd30...
             Coefficient: 0x722751305eafe9...
       }

     The line pubkey=0sAQOrW... of the private key contains a public key that should be stored in the other
     peer's configuration in this format:

     : PUB 0sAQOrWlcwbAIdNSMhDt...

     You can also specify from and to addresses for which the key is valid:

     0.0.0.0/0 10.20.30.0/24 : PUB 0sAQOrWlcwbAIdNSMhDt...

SEE ALSO

     racoon.conf(5), racoon(8)

HISTORY

     plainrsa-gen was written by Michal Ludvig <michal@logix.cz> and first appeared in ipsec-tools 0.4.