bionic (8) wpa_background.8.gz

NAME

       wpa_background - Background information on Wi-Fi Protected Access and IEEE 802.11i

WPA

       The  original  security mechanism of IEEE 802.11 standard was not designed to be strong and has proven to
       be insufficient for most networks that require some kind of security. Task group  I  (Security)  of  IEEE
       802.11  working  group  (http://www.ieee802.org/11/) has worked to address the flaws of the base standard
       and has in practice completed its work in May 2004.  The  IEEE  802.11i  amendment  to  the  IEEE  802.11
       standard was approved in June 2004 and published in July 2004.

       Wi-Fi  Alliance  (http://www.wi-fi.org/)  used  a  draft  version of the IEEE 802.11i work (draft 3.0) to
       define a subset of the security enhancements that can be implemented with existing wlan hardware. This is
       called  Wi-Fi  Protected  Access<TM> (WPA). This has now become a mandatory component of interoperability
       testing and certification done by Wi-Fi Alliance. Wi-Fi provides information about WPA at  its  web  site
       (http://www.wi-fi.org/OpenSection/protected_access.asp).

       IEEE  802.11  standard defined wired equivalent privacy (WEP) algorithm for protecting wireless networks.
       WEP uses RC4 with 40-bit keys, 24-bit initialization vector (IV), and CRC32  to  protect  against  packet
       forgery.  All  these  choices  have  proven  to  be  insufficient: key space is too small against current
       attacks, RC4 key scheduling is insufficient (beginning of the pseudorandom stream should be skipped),  IV
       space  is  too  small  and  IV  reuse  makes attacks easier, there is no replay protection, and non-keyed
       authentication does not protect against bit flipping packet data.

       WPA is an intermediate solution for the security issues. It uses Temporal Key Integrity  Protocol  (TKIP)
       to  replace  WEP.  TKIP  is  a compromise on strong security and possibility to use existing hardware. It
       still uses RC4 for the encryption like WEP, but with per-packet RC4  keys.  In  addition,  it  implements
       replay protection, keyed packet authentication mechanism (Michael MIC).

       Keys  can be managed using two different mechanisms. WPA can either use an external authentication server
       (e.g., RADIUS) and EAP just like IEEE 802.1X is using or pre-shared  keys  without  need  for  additional
       servers.  Wi-Fi  calls  these  "WPA-Enterprise"  and  "WPA-Personal",  respectively. Both mechanisms will
       generate a master session key for the Authenticator (AP) and Supplicant (client station).

       WPA implements a new key  handshake  (4-Way  Handshake  and  Group  Key  Handshake)  for  generating  and
       exchanging  data encryption keys between the Authenticator and Supplicant. This handshake is also used to
       verify that both Authenticator and Supplicant know the master session key. These handshakes are identical
       regardless  of  the  selected key management mechanism (only the method for generating master session key
       changes).

IEEE 802.11I / WPA2

       The design for parts of IEEE 802.11i that were not included in WPA  has  finished  (May  2004)  and  this
       amendment  to  IEEE 802.11 was approved in June 2004. Wi-Fi Alliance is using the final IEEE 802.11i as a
       new version of WPA called WPA2. This includes, e.g., support for more robust encryption algorithm  (CCMP:
       AES  in  Counter  mode  with  CBC-MAC)  to  replace TKIP and optimizations for handoff (reduced number of
       messages in initial key handshake, pre-authentication, and PMKSA caching).

SEE ALSO

       wpa_supplicant(8)

LEGAL

       wpa_supplicant is copyright  (c)  2003-2016,  Jouni  Malinen  <j@w1.fi>  and  contributors.   All  Rights
       Reserved.

       This program is licensed under the BSD license (the one with advertisement clause removed).

                                                 05 August 2024                                WPA_BACKGROUND(8)