Provided by: sbuild_0.79.0-1ubuntu1_all
NAME
sbuild - build debian packages from source
SYNOPSIS
sbuild [-h|--help | -V|--version] [-v|--verbose | -q|--quiet] [-D|--debug] [-A|--arch-all] [--archive=archive] [-d|--dist=distribution] [-c|--chroot=chroot] [--chroot- mode=schroot|sudo|autopkgtest|unshare] [--arch=architecture] [--arch-any | --no-arch-any] [--build=architecture] [--host=architecture] [--profiles=profile[,...]] [-s|--source] [--force-orig-source] [--make-binNMU=changelog-entry] [--binNMU=NMU-version] [--append-to-version=string] [--binNMU-timestamp=timestamp] [--binNMU-changelog=changelog] [--build-dir=directory] [--add-depends=dependency] [--add-conflicts=dependency] [--add- depends-arch=dependency] [--add-conflicts-arch=dependency] [--add- depends-indep=dependency] [--add-conflicts-indep=dependency] [-m|--maintainer=maintainer] [-e|--uploader=uploader] [-k|--keyid=key-id] [--source-only-changes] [--no-source-only-changes] [-j|--jobs=n] [--debbuildopt=option] [--debbuildopts=options] [--dpkg-source-opt=options] [--dpkg-source-opts=options] [--dpkg-file-suffix=suffix] [-p|--purge=purge-mode] [--purge-build=purge-mode] [--purge-deps=purge-mode] [--purge-session=purge-mode] [-b|--batch] [-n|--nolog] [--clean-source] [--no-clean-source] [--run-lintian] [--no-run-lintian] [--lintian-opt=options] [--lintian-opts=options] [--run-piuparts] [--no-run-piuparts] [--piuparts-opt=options] [--piuparts-opts=options] [--piuparts-root-arg=options] [--piuparts-root-args=options] [--run-autopkgtest] [--no-run-autopkgtest] [--autopkgtest-opt=options] [--autopkgtest-opts=options] [--autopkgtest-root-arg=options] [--autopkgtest-root-args=options] [--pre-build-commands=string] [--chroot-setup-commands=string] [--chroot-update-failed-commands=string] [--build-deps-failed-commands=string] [--starting-build-commands=string] [--finished-build-commands=string] [--build-failed-commands=string] [--chroot-cleanup-commands=string] [--post-build-commands=string] [--post-build-failed-commands=string] [--anything-failed-commands=string] [--log-external-command-output] [--log-external-command-error] [--setup-hook=hook-script] [--build-dep-resolver=resolver] [--resolve-alternatives|--no-resolve-alternatives] [--extra-package=package.deb] [--extra-repository=spec] [--extra-repository-key=file.asc] [--build-path=string] [--autopkgtest-virt-server=schroot|lxc|chroot|qemu|ssh] [--autopkgtest-virt-server-opt=string] [--autopkgtest-virt-server-opts=options] [--purge-extra-packages] [--bd-uninstallable-explainer=dose3|apt] [PACKAGE[.dsc]]
DESCRIPTION
sbuild rebuilds Debian binary packages from the corresponding Debian source, installing any missing source dependencies. The build takes place in a dedicated clean build environment, rather than on the host system. For an overview of the supported chroot backends see the section CHROOT MODES. sbuild can fetch the Debian source over a network, or it can use locally available sources. sbuild is given a packages to process as the argument PACKAGE[.dsc]. This argument is in the form of either a debianized package source directory, a source package name along with a version in the form package_version, a source package name, or a .dsc file. If no arguments are given, the current working directory is passed as an argument. For arguments given as source directories, dpkg-source is first run to produce a source .dsc file. Then, the package is built using the .dsc produced. For arguments in the form package_version or package, apt is used to download the source package. For arguments given as a .dsc file, sbuild builds the source packages directly. For .dsc files in remote locations, the source packages are downloaded first, then built. It is also possible to run external commands with sbuild. See the section EXTERNAL COMMANDS for more on this. sbuild mails the build logs to a user. It is configured by the configuration files /etc/sbuild/sbuild.conf and ~/.sbuildrc. An example sbuildrc is available in /usr/share/doc/sbuild/examples/example.sbuildrc. A custom path to a configuration file can also be specified through setting the SBUILD_CONFIG environment variable to the path of an additional configuration file. You can build either using a local package with its .dsc file or a remote one by specifying an explicit dpkg version.
OPTIONS
Options set on the command line overwrite settings made in the configuration file. -h, --help Display this manual. -V, --version Print version information. --add-depends=dependency --add-conflicts=dependency --add-depends-arch=dependency --add-conflicts-arch=dependency --add-depends-indep=dependency --add-conflicts-indep=dependency These options add a build dependencies to the source package being built, in addition to the build dependency information specified in debian/control. These dependencies will be concatenated directly to the Build-Depends, Build-Conflicts, Build-Depends-Arch, Build-Conflicts-Arch, Build-Depends-Indep and Build-Conflicts- Indep dependencies, respectively. The options may be used any number of times to add multiple dependencies. The format is identical to the format used in debian/control. These command line options append to the MANUAL_DEPENDS, MANUAL_CONFLICTS, MANUAL_DEPENDS_ARCH, MANUAL_CONFLICTS_ARCH, MANUAL_DEPENDS_INDEP and MANUAL_CONFLICTS_INDEP configuration variables, respectively. See sbuild.conf(5) for more information. --arch=architecture Build using the architecture specified. A chroot named $distribution-$arch-sbuild or $distribution-arch is searched for, in that order of preference. The chroot must be installed and configured appropriately to build as that architecture, e.g. using personality=linux32 to build i386 packages on an amd64 system. Note that this option is equivalent to "--host=architecture --build=architecture". This command line option sets the HOST_ARCH and BUILD_ARCH configuration variables. See sbuild.conf(5) for more information. --host=architecture Build using the host architecture specified. If $host and $build don't match, a chroot named $distribution-$build-$host-sbuild or $distribution-$build-$host is searched for, falling back to $distribution-$build-sbuild or $distribution-$build, in that order of preference. This option is only useful for cross-building when used together with --build. This command line option sets the HOST_ARCH configuration variable. See sbuild.conf(5) for more information. --build=architecture Build using the build architecture specified. This option is only useful for cross-building when used together with --host. If --build is not specified, the default system architecture is assumed. This command line option sets the BUILD_ARCH configuration variable. See sbuild.conf(5) for more information. -A, --arch-all Also build Architecture: all packages. This option is the opposite of --no-arch-all. See the section BUILD ARTIFACTS for more information. This command line option sets the BUILD_ARCH_ALL configuration variable. See sbuild.conf(5) for more information. --no-arch-all Do not build Architecture: all packages. This is the default behaviour. This option is the opposite of --arch-all. See the section BUILD ARTIFACTS for more information. This command line option sets the BUILD_ARCH_ALL configuration variable. See sbuild.conf(5) for more information. --arch-any Build Architecture: any packages. This is the default behavior. This option is the opposite of --no-arch-any. See the section BUILD ARTIFACTS for more information. This command line option sets the BUILD_ARCH_ANY configuration variable. See sbuild.conf(5) for more information. --no-arch-any Do not build Architecture: any packages. This option is the opposite of --arch-any and only useful when used together with --arch-all or --source. See the section BUILD ARTIFACTS for more information. This command line option sets the BUILD_ARCH_ANY configuration variable. See sbuild.conf(5) for more information. -b, --batch Operate in batchmode, i.e. write a build-progress file during execution and files on shutdown to facilitate a clean restart. This command line option sets the BATCH_MODE configuration variable. See sbuild.conf(5) for more information. -c, --chroot=chroot Specifies the chroot to use. The effect of this option depends on the selected chroot mode. With the schroot chroot mode, this option specifies the schroot name or alias to use. If not specified, the default is the first of schroot name or alias that matches $distribution-$arch-sbuild, $distribution-sbuild, $distribution-$arch or $distribution that exists. With the sudo chroot mode, this option specifies the chroot directory to use. The directory is either expected in /etc/sbuild/chroot (in buildd sbuild mode) or in the build directory (see --build-dir), prefixed with "chroot-" (in user sbuild mode, the default). If not specified, the default is to search for a directory in the respective locations named in the same way as for the schroot mode. With the unshare chroot mode, if this option is a path, then it specifies the location of the chroot tarball directly. Otherwise, a tarball with equal basename from ~/.cache/sbuild will be used. If not specified, the default is to search for a tarball named in the same way as for the schroot mode under ~/.cache/sbuild. With the autopkgtest chroot mode this option has no effect. The --autopkgtest-virt-server-opts are used to pick the chroot in autopkgtest chroot mode. This command line option sets the CHROOT configuration variable. See sbuild.conf(5) for more information. --chroot-mode=schroot|sudo|autopkgtest|unshare Select the desired chroot mode. Four values are possible: schroot (the default), sudo (which uses sudo to execute chroot in a directory from /etc/sbuild/chroot or ./chroot), autopkgtest which uses the autopkgtest-virt-* binaries (selectable via the --autopkgtest-virt-server option) and unshare (which uses linux namespaces for chroot and doesn't require superuser privileges). See the section CHROOT MODES for more information. This command line option sets the CHROOT_MODE configuration variable. See sbuild.conf(5) for more information. -d, --dist=distribution Explicitly set the distribution for the package build. This will be selecting the correct chroot to use and also sets the value of the Distribution field in the created .changes file. Setting this option is necessary when giving sbuild a .dsc file or a plain source package name to build. In the latter case it specifies the distribution the source package is fetched from. This command line option sets the DISTRIBUTION configuration variable. See sbuild.conf(5) for more information. --archive=archive Communicate with specified archive. This command line option sets the ARCHIVE configuration variable. See sbuild.conf(5) for more information. -D, --debug Enable debug output. --apt-clean --no-apt-clean Run (or do not run) apt-get clean in the chroot before executing the build, overriding the default setting. This command line option sets the APT_CLEAN configuration variable. See sbuild.conf(5) for more information. --apt-update --no-apt-update Run (or do not run) apt-get update in the chroot before executing the build, overriding the default setting. This option has no effect on updating the internal sbuild apt repository, the repository for extra packages (see --extra-package) and the repositories given via --extra-repository. These are always updated. Thus, this option only influences updates of the default repositories of the chroot. This command line option sets the APT_UPDATE configuration variable. See sbuild.conf(5) for more information. --apt-upgrade --no-apt-upgrade Run (or do not run) apt-get upgrade in the chroot before executing the build, overriding the default setting. This command line option sets the APT_UPGRADE configuration variable. See sbuild.conf(5) for more information. --apt-distupgrade --no-apt-distupgrade Run (or do not run) apt-get distupgrade in the chroot before executing the build, overriding the default setting. This command line option sets the APT_DISTUPGRADE configuration variable. See sbuild.conf(5) for more information. -m, --maintainer=maintainer Specify the identity to use for GPG signing packages, and also used as the maintainer for binary NMUs. This does not normally require setting (it defaults to the uploader). This command line option sets the MAINTAINER_NAME configuration variable. See sbuild.conf(5) for more information. -e, --uploader=uploader Passed to dpkg-genchanges and is used to set the Changed-by: field in the .changes file(s). This command line option sets the UPLOADER_NAME configuration variable. See sbuild.conf(5) for more information. -k, --keyid=key-id Passed to debsign and is used to set the key to sign the .changes file(s). Default is not using any key and not signing the .changes file(s). This command line option sets the KEY_ID configuration variable. See sbuild.conf(5) for more information. --source-only-changes --no-source-only-changes In addition to the .changes file generated by dpkg-buildpackage, also produce (or don't produce) a .changes file suitable for a source-only upload. If requested by --keyid, this .changes file will also be signed by debsign. This command line option sets the SOURCE_ONLY_CHANGES configuration variable. See sbuild.conf(5) for more information. -j, --jobs=n Number of jobs to run simultaneously. Passed through to dpkg-buildpackage. This command line option appends the appropriate -j option to the DPKG_BUILDPACKAGE_USER_OPTIONS configuration variable. See sbuild.conf(5) for more information. --debbuildopt=option Pass the specified option directly to dpkg-buildpackage in addition to the options already passed by sbuild. This option can be passed multiple times (once per dpkg- buildpackage option) and can be freely mixed with the --debbuildopts option. Options will be passed to dpkg-buildpackage in the order that the --debbuildopt and --debbuildopts options are given on the command line. This command line option appends to the DPKG_BUILDPACKAGE_USER_OPTIONS configuration variable. See sbuild.conf(5) for more information. --debbuildopts=options Pass the specified options directly to dpkg-buildpackage in addition to the options already passed by sbuild. The argument will be split by whitespaces and the resulting array passed to the dpkg-buildpackage invocation. If any options contain spaces, use --debbuildopt for them. This option can be passed multiple times and can be freely mixed with the --debbuildopt option. Options will be passed to dpkg-buildpackage in the order that the --debbuildopt and --debbuildopts options are given on the command line. This command line option appends to the DPKG_BUILDPACKAGE_USER_OPTIONS configuration variable. See sbuild.conf(5) for more information. --dpkg-source-opt=options Pass the specified option directly to dpkg-source in addition to the options already passed by sbuild. This is only used when creating a source package from a Debianized source directory. This option can be passed multiple times (once per dpkg-source option) and can be freely mixed with the --dpkg-source-opts option. Options will be passed to dpkg-source in the order that the --dpkg-source-opt and --dpkg-source-opts options are given on the command line. This command line option appends to the DPKG_SOURCE_OPTIONS configuration variable. See sbuild.conf(5) for more information. NOTE: The '-b', '--before-build' and '--after-build' options will always be passed to dpkg-source, respectively. --dpkg-source-opts=options Pass the specified options directly to dpkg-source in addition to the options already passed by sbuild. The argument will be split by whitespaces and the resulting array passed to the dpkg-source invocation. This is only used when creating a source package from a Debianized source directory. If any options contain spaces, use --dpkg-source-opt for them. This option can be passed multiple times and can be freely mixed with the --dpkg-source-opt option. Options will be passed to dpkg-source in the order that the --dpkg-source-opt and --dpkg-source-opts options are given on the command line. This command line option appends to the DPKG_SOURCE_OPTIONS configuration variable. See sbuild.conf(5) for more information. NOTE: The '-b', '--before-build' and '--after-build' options will always be passed to dpkg-source, respectively. --dpkg-file-suffix=suffix Add the suffix to the filename of the changes and buildinfo files generated by dpkg. NOTE: This option is ignored if dpkg-dev in the build environment is too old to support it. At least dpkg-dev 1.18.11 is required. --mail-log-to=email-address Send the build log to the specified email address. This command line option sets the MAILTO configuration variable. See sbuild.conf(5) for more information. --mailfrom=email-address Email address used as the sender address for build logs. This command line option sets the MAILFROM configuration variable. See sbuild.conf(5) for more information. -n, --nolog Do not create a package log file in the $log_dir directory and no build log file, but print everything to stdout. Also do not send any log mails. This command line option sets the NOLOG configuration variable. See sbuild.conf(5) for more information. --profiles=profile[,...]" Specify the profile(s) we build, as a comma-separated list. Defaults to the space separated list of profiles in the DEB_BUILD_PROFILES environment variable when building natively or the cross and nocheck profiles when cross-building. This command line option sets the BUILD_PROFILES configuration variable. See sbuild.conf(5) for more information. -p, --purge=purge-mode Convenience option to set purge-mode for build directory, build dependencies and session. This command line option sets the PURGE_BUILD_DEPS, PURGE_BUILD_DIRECTORY and PURGE_SESSION configuration variables. See sbuild.conf(5) for more information. --purge-build=purge-mode purge-mode determines if the build directory will be deleted after a build. Possible values are always (default), never, and successful. This command line option sets the PURGE_BUILD_DIRECTORY configuration variable. See sbuild.conf(5) for more information. --purge-deps=purge-mode purge-mode determines if the build dependencies will be removed after a build. Possible values are always (default), never, and successful. This command line option sets the PURGE_BUILD_DEPS configuration variable. See sbuild.conf(5) for more information. --purge-session=purge-mode Purge the schroot session following a build. This is useful in conjunction with the --purge-build and --purge-deps options when using snapshot chroots, since by default the snapshot will be deleted. Possible values are always (default), never, and successful. This command line option sets the PURGE_SESSION configuration variable. See sbuild.conf(5) for more information. -s, --source Build the source package in addition to the other requested build artifacts. By default, the dsc will not be rewritten because the source package is the input to sbuild, not its output. Even when running from an unpacked source tree sbuild will first build the source package using dpkg-source and then pass that on to the sbuild machinery. Use this option only when you know what you are doing. This will rewrite the original dsc passed to sbuild. See the section BUILD ARTIFACTS for more information. This command line option sets the BUILD_SOURCE configuration variable. See sbuild.conf(5) for more information. --no-source Don't rebuild the source package. This is the default. It is the opposite of --source. See the section BUILD ARTIFACTS for more information. This command line option sets the BUILD_SOURCE configuration variable. See sbuild.conf(5) for more information. --force-orig-source When used with in conjunction with -s, this option forces the inclusion of the orig.tar.gz file in the generated .changes file, even in cases where it would not normally be included, i.e. use dpkg-buildpackage -sa. This command line option sets the FORCE_ORIG_SOURCE configuration variable. See sbuild.conf(5) for more information. --use-snapshot Installs the latest snapshot gcc compiler from the gcc-snapshot package, and alters the build environment to use the snapshot compiler for the build. Specifically, this option appends /usr/lib/gcc-snapshot/lib to the value of the LD_LIBRARY_PATH configuration variable and /usr/lib/gcc-snapshot/bin to the value of the PATH configuration variable. It also sets the GCC_SNAPSHOT configuration variable. See sbuild.conf(5) for more information. -v, --verbose Be verbose, i.e. all information goes to stdout as well as to the log files. -q, --quiet Be quiet. This is the opposite of --verbose. --make-binNMU=changelog-entry With this option, sbuild will create a new changelog entry in debian/changelog of every package built. The version number will be in the format for binary-only NMUs (see --binNMU); the maintainer is set to the maintainer name configured for sbuild. changelog-entry will be used as the changelog entry following “Binary-only non- maintainer upload for ARCH -- no source changes”. Please note that the versions in the PACKAGE_VERSION[.dsc] arguments still have to be the unmodified (non-NMU ones) so that the sources can be found. The version number in log files and mails will be modified by sbuild automatically. The --append-to-version option has a similar effect but allows one to specify an arbitrary version suffix instead of a custom changelog entry. To have a custom version suffix and a custom changelog entry, use --make-binNMU and --append-to-version at the same time with --binNMU=0. This option is incompatible with --binNMU-changelog. This option implies --no-arch-all. This command line option sets the BIN_NMU configuration variable and sets the BIN_NMU_VERSION configuration variable to 1 if it was not set yet, for example by the --binNMU option. See sbuild.conf(5) for more information. --binNMU=NMU-version The version number of the binary NMU. This option only has an effect if combined with --make-binNMU and/or with --append-to-version. version is a single number for the (+bn) format used for binary NMUs. If the argument is the empty string or zero, then the +bn suffix will not be appended. The +bn suffix will be appended after the string given via --append-to-version. This option is incompatible with --binNMU-changelog. This command line option sets the BIN_NMU_VERSION configuration variable. See sbuild.conf(5) for more information. --append-to-version=string This option is similar to --make-binNMU except that it allows the user to specify an arbitrary string to be appended to the version number (immediately before the '+' in the Debian revision if --make-binNMU is also provided). To pass an arbitrary changelog text as well, combine this option with --make-binNMU but be aware that this will also add the +bn suffix unless you also pass --binNMU=0 to disable it. This option is incompatible with --binNMU-changelog. This option implies --no-arch-all. This command line option sets the APPEND_TO_VERSION configuration variable. See sbuild.conf(5) for more information. --binNMU-timestamp=timestamp Set the timestamp of the new binNMU changelog entry. By default, the time of the build will be used to generate the binNMU changelog timestamp. This option allows one to use a custom timestamp instead. The timestamp is either given as an integer in Unix time or as a string in the format compatible with Debian changelog entries (i.e. as it is generated by date -R). This option is incompatible with --binNMU-changelog. This command line option sets the BIN_NMU_TIMESTAMP configuration variable. See sbuild.conf(5) for more information. --binNMU-changelog=changelog Set the complete content of a binary-only changelog entry. This option allows full customization of the new changelog entry. It is up to the user to make sure that the changelog entry is well-formed. The argument has to include all necessary newlines. Leading and trailing newlines will be stripped. Sbuild will not interpret any backslash escapes. This option is incompatible with --make-binNMU, --binNMU, --append-to-version and --binNMU-timestamp. This command line option sets the BIN_NMU_CHANGELOG configuration variable. See sbuild.conf(5) for more information. --build-dir=directory Set the output directory for the build artifacts created by dpkg-buildpackage and the log file. By default, the current directory is used or, when sbuild is executed from within an unpacked source directory, the parent directory. This command line option sets the BUILD_DIR configuration variable. See sbuild.conf(5) for more information. --clean-source When executing sbuild from within an unpacked source tree, execute the debian/rules clean target. This is the default and might require some of the build dependencies installed on the host. This command line option sets the CLEAN_SOURCE configuration variable. See sbuild.conf(5) for more information. --no-clean-source When executing sbuild from within an unpacked source tree, do not run the debian/rules clean target before building the source package. Only set this if you start from a clean checkout and you know what you are doing. This command line option sets the CLEAN_SOURCE configuration variable. See sbuild.conf(5) for more information. --run-lintian Run lintian after a successful build. This command line option sets the RUN_LINTIAN configuration variable. See sbuild.conf(5) for more information. --no-run-lintian Don't run lintian after a successful build. If sbuild is configured to run lintian by default, this option will prevent lintian being run. This command line option sets the RUN_LINTIAN configuration variable. See sbuild.conf(5) for more information. --lintian-opt=options Pass the specified option directly to lintian in addition to the options already passed by sbuild. This option can be passed multiple times (once per lintian option) and can be freely mixed with the --lintian-opts option. Options will be passed to lintian in the order that the --lintian-opt and --lintian-opts options are given on the command line. This command line option appends to the LINTIAN_OPTIONS configuration variable. See sbuild.conf(5) for more information. --lintian-opts=options Pass the specified options directly to lintian in addition to the options already passed by sbuild. The argument will be split by whitespaces and the resulting array passed to the lintian invocation. If any options contain spaces, use --lintian-opt for them. This option can be passed multiple times and can be freely mixed with the --lintian-opts option. Options will be passed to lintian in the order that the --lintian-opt and --lintian-opts options are given on the command line. This command line option appends to the LINTIAN_OPTIONS configuration variable. See sbuild.conf(5) for more information. --run-piuparts Run piuparts after a successful build. This command line option sets the RUN_PIUPARTS configuration variable. See sbuild.conf(5) for more information. --no-run-piuparts Don't run piuparts after a successful build. If sbuild is configured to run piuparts by default, this option will prevent piuparts being run. This command line option sets the RUN_PIUPARTS configuration variable. See sbuild.conf(5) for more information. --piuparts-opt=options Pass the specified option directly to piuparts in addition to the options already passed by sbuild. This option can be passed multiple times (once per piuparts option) and can be freely mixed with the --piuparts-opts option. Options will be passed to piuparts in the order that the --piuparts-opt and --piuparts-opts options are given on the command line. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section OPTION STRING PERCENT ESCAPES for more information. This command line option appends to the PIUPARTS_OPTIONS configuration variable. See sbuild.conf(5) for more information. --piuparts-opts=options Pass the specified options directly to piuparts in addition to the options already passed by sbuild. The argument will be split by whitespaces and the resulting array passed to the piuparts invocation. If any options contain spaces, use --piuparts-opt for them. This option can be passed multiple times and can be freely mixed with the --piuparts-opts option. Options will be passed to piuparts in the order that the --piuparts-opt and --piuparts-opts options are given on the command line. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section OPTION STRING PERCENT ESCAPES for more information. This command line option appends to the PIUPARTS_OPTIONS configuration variable. See sbuild.conf(5) for more information. --piuparts-root-arg=options Add an argument that is used to launch piuparts as root. Without this option, the default is to use "sudo --" to launch piuparts. If an empty string is supplied, then piuparts is launched without any prefixed command. This option can be specified multiple times. This command line option appends to the PIUPARTS_ROOT_ARGS configuration variable. See sbuild.conf(5) for more information. --piuparts-root-args=options Add arguments that are used to launch piuparts as root. Without this option, the default is to use "sudo --" to launch piuparts. If an empty string is supplied, then piuparts is launched without any prefixed command. The argument will be split by whitespaces. To pass options containing whitespaces use the option --piuparts-root-arg. This command line option appends to the PIUPARTS_ROOT_ARGS configuration variable. See sbuild.conf(5) for more information. --run-autopkgtest Run autopkgtest after a successful build. This command line option sets the RUN_AUTOPKGTEST configuration variable. See sbuild.conf(5) for more information. --no-run-autopkgtest Don't run autopkgtest after a successful build. If sbuild is configured to run autopkgtest by default, this option will prevent autopkgtest being run. This command line option sets the RUN_AUTOPKGTEST configuration variable. See sbuild.conf(5) for more information. --autopkgtest-opt=options Pass the specified option directly to autopkgtest in addition to the options already passed by sbuild. This option can be passed multiple times (once per autopkgtest option) and can be freely mixed with the --autopkgtest-opts option. Options will be passed to autopkgtest in the order that the --autopkgtest-opt and --autopkgtest-opts options are given on the command line. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section OPTION STRING PERCENT ESCAPES for more information. This command line option appends to the AUTOPKGTEST_OPTIONS configuration variable. See sbuild.conf(5) for more information. --autopkgtest-opts=options Pass the specified options directly to autopkgtest in addition to the options already passed by sbuild. The argument will be split by whitespaces and the resulting array passed to the autopkgtest invocation. If any options contain spaces, use --autopkgtest-opt for them. This option can be passed multiple times and can be freely mixed with the --autopkgtest-opts option. Options will be passed to autopkgtest in the order that the --autopkgtest-opt and --autopkgtest-opts options are given on the command line. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section OPTION STRING PERCENT ESCAPES for more information. This command line option appends to the AUTOPKGTEST_OPTIONS configuration variable. See sbuild.conf(5) for more information. --autopkgtest-root-arg=options Add an argument that is used to launch autopkgtest as root. Without this option, the default is to use "sudo --" to launch autopkgtest. If an empty string is supplied, then autopkgtest is launched without any prefixed command. This option can be specified multiple times. This command line option appends to the AUTOPKGTEST_ROOT_ARGS configuration variable. See sbuild.conf(5) for more information. --autopkgtest-root-args=options Add arguments that are used to launch autopkgtest as root. Without this option, the default is to use "sudo --" to launch autopkgtest. If an empty string is supplied, then autopkgtest is launched without any prefixed command. The argument will be split by whitespaces. To pass options containing whitespaces use the option --autopkgtest-root-arg. This command line option appends to the AUTOPKGTEST_ROOT_ARGS configuration variable. See sbuild.conf(5) for more information. --pre-build-commands=string This is the earliest external command which is run right after the chroot session has been initialized and before anything else is done (like installing the build dependencies). The command is run outside of the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --chroot-setup-commands=string Run these commands after the chroot and variables have been setup but before dependencies are installed. The command is run as root inside of the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --chroot-update-failed-commands=string Run these commands after any of 'apt-get update', 'apt-get upgrade' or 'apt-get dist-upgrade' failed. This hook is not run for updates of the internal sbuild apt repository, the repository for extra packages (see --extra-package) and the repositories given via --extra-repository. The environment is intact, and the failure can be investigated. Especially %SBUILD_SHELL is useful here. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign.See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --build-deps-failed-commands=string These commands are run if installing the build dependencies has failed directly after the failed attempt. The environment is intact, and the failure can be investigated. Especially %SBUILD_SHELL is useful here. The command is run as root inside the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --starting-build-commands=string Run these commands after dependencies are installed, just before the package build with dpkg-buildpackage starts. The command is run as the (non-root) user running sbuild inside the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --finished-build-commands=string Run these commands immediately after the timed package build finishes. The command is run as the (non-root) user running sbuild inside the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --build-failed-commands=string These commands are run if dpkg-buildpackage has failed directly after the failed attempt. The environment is intact, and the failure can be investigated. Especially %SBUILD_SHELL is useful here. The command is run as the (non-root) user running %sbuild inside the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --chroot-cleanup-commands=string Run these commands when a chroot is cleaned up, before build directory is purged. The command is run as root inside the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --post-build-commands=string Run this command after a successful build. The command is run outside of the chroot. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section --post-build-failed-commands=string Exactly like the above, but when a build fails. EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --anything-failed-commands=string Run these commands for all the --xxx-failed-commands options. Especially %SBUILD_SHELL is useful here. This option can be used multiple times to add multiple commands. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section EXTERNAL COMMANDS for more information. This command line option appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --log-external-command-output Write output from external commands to the build log. This command line option sets the LOG_EXTERNAL_COMMAND_OUTPUT configuration variable. See sbuild.conf(5) for more information. --log-external-command-error Write error output from external commands to the build log. This command line option sets the LOG_EXTERNAL_COMMAND_ERROR configuration variable. See sbuild.conf(5) for more information. --setup-hook=hook-script DEPRECATED This option is deprecated. Use of this option will add hook-script to the external commands to run via chroot-setup-commands. This command line option sets the CHROOT_SETUP_SCRIPT configuration variable and appends to the EXTERNAL_COMMANDS configuration variable. See sbuild.conf(5) for more information. --build-dep-resolver=resolver Use the specified resolver to handle selecting the build dependencies. Supported resolvers are apt (the default), aptitude, aspcud, xapt, and null. The apt resolver is the most appropriate resolver for most users, for building for unstable, stable and other distributions. If alternative build dependencies are used (excluding architecture restrictions), only the first alternative will be used; the others will be ignored. The aptitude resolver is very similar, but smarter and slower, and it will consider all alternatives by default; it is suited to more complex situations, such as building packages for the experimental distribution, where packages need installing from multiple suites (unstable and experimental). Due to performance and other issues (bug #139615), aptitude is not recommended for use by default. If the dependency situation is so complex that neither apt nor aptitude are able to find a solution, then you can use the aspcud resolver. This resolver uses apt-cudf to ask aspcud, a real solver (in the math sense), to find a solution to the installation problem. Since aspcud uses a real solver (an ASP solver) it will always find a solution if one exists. The solution found by the aspcud resolver can be refined by changing the default optimization criteria through the --aspcud-criteria option. The xapt resolver is intended only for cross-building, and is a temporary transitional feature which will be removed following the complete introduction of multi-arch support. Finally, the null resolver is a dummy solver which does not install, upgrade or remove any packages. This allows one to completely control package installation via hooks. This command line option sets the BUILD_DEP_RESOLVER configuration variable. See sbuild.conf(5) for more information. --aspcud-criteria=criteria Optimization criteria in extended MISC 2012 syntax passed to aspcud through apt- cudf. Optimization criteria are separated by commas, sorted by decreasing order of priority and are prefixed with a polarity (+ to maximize and - to minimize). The default criteria is -removed,-changed,-new which first minimizes the number of removed packages, then the number of changed packages (up or downgrades) and then the number of new packages. A common task is to minimize the number of packages from experimental. To do this you can add a criteria like -count(solution,APT- Release:=/a=experimental/) to the default criteria. This will then minimize the number of packages in the solution which contain the string a=experimental in the APT-Release field of the EDSP output created by apt. For more help on how to write optimization criteria, see the apt-cudf(1) man page. Specifically the help on the --criteria option. This command line option sets the ASPCUD_CRITERIA configuration variable. See sbuild.conf(5) for more information. --resolve-alternatives Allow the use of alternatives in Build-Depends, Build-Depends-Arch and Build- Depends-Indep. This is the default for the aptitude dependency resolver. This command line option sets the RESOLVE_ALTERNATIVES configuration variable. See sbuild.conf(5) for more information. --no-resolve-alternatives Do not allow the use of alternatives in Build-Depends, Build-Depends-Arch and Build-Depends-Indep. Note that alternatives for the same package (e.g. different versions) are still allowed. This is the default for the apt and xapt dependency resolvers. This command line option sets the RESOLVE_ALTERNATIVES configuration variable. See sbuild.conf(5) for more information. --extra-package=package.deb|directory Make package.deb available for build-dependency resolution, by adding it to a temporary archive created by sbuild. This makes it easier to build packages against locally-built build dependencies, without waiting for those packages to enter the main archive, or going through the hassle of maintaining a local archive and making it accessible inside the chroot. package.deb is copied into the chroot, so it can refer to any path on the host system. If a directory is passed instead of a regular file, then all regular files inside that directory with a filename that ends in .deb will be added in the same fashion as it is done for individual packages. This option can be specified multiple times. This command line option appends to the EXTRA_PACKAGES configuration variable. See sbuild.conf(5) for more information. --extra-repository=spec Add a repository to the list of apt sources during the package build. The repository specification is a line suitable for an apt sources.list(5) file. For instance, you might use --extra-repository="deb http://deb.debian.org/debian experimental main" to allow packages in the experimental distribution to fulfill build-dependencies. Note that the build chroot must already trust the key of this repository or a key must be given with the --extra-repository-key flag (see apt- secure(8)). This command line option appends to the EXTRA_REPOSITORIES configuration variable. See sbuild.conf(5) for more information. --extra-repository-key=file.asc Add file.asc to the list of trusted keys inside the chroot. The key is read from the filename given, and added to the trusted keys. For more information, see apt- secure(8). This flag is particularly useful if the target in --extra-repository is not signed with a key that's trusted by the base chroot. This command line option appends to the EXTRA_REPOSITORY_KEYS configuration variable. See sbuild.conf(5) for more information. --build-path=string By default the package is built in a path of the following format /build/packagename-XXXXXX/packagename-version/ where XXXXXX is a random ascii string. This option allows one to specify a custom path where the package is built inside the chroot. The sbuild user in the chroot must have permissions to create the path. Common writable locations are subdirectories of /tmp or /build. Using /tmp might be dangerous, because (depending on the chroot mode) the /tmp inside the chroot might be a world writable location that can be accessed by processes outside the chroot. The directory /build can only be accessed by the sbuild user and group and should be a safe location. The buildpath must be an empty directory because the last component of the path will be removed after the build is finished. Notice that depending on the chroot mode (see --chroot-mode), some locations inside the chroot might be bind mounts that are shared with other sbuild instances. You must avoid using these shared locations as the build path or otherwise concurrent runs of sbuild will likely fail. With the default schroot chroot mode, the directory /build is shared between multiple schroot sessions. You can change this behaviour in /etc/schroot/sbuild/fstab. The behaviour of other chroot modes will vary. This command line option sets the BUILD_PATH configuration variable. See sbuild.conf(5) for more information. --autopkgtest-virt-server=schroot|lxc|chroot|qemu|ssh The autopkgtest virtualization server. Can be specified with or without the autopkgtest-virt- prefix. For instance, the following set of command line options will use the autopkgtest-virt-schroot chroot mode for a package build: --chroot- mode=autopkgtest --autopkgtest-virt-server=schroot --chroot unstable-amd64-sbuild The value of the --chroot option will be passed as the last positional argument to the autopkgtest-virt-* invocation. Thus, the value of the --chroot option becomes the image name of the virtual machine in case of autopkgtest-virt-qemu, the lxc- container name in case of autopkgtest-virt-lxc, the path to the chroot in case of autopkgtest-virt-chroot, the name of the schroot in case of autopkgtest-virt- schroot and so on. This command line option sets the AUTOPKGTEST_VIRT_SERVER configuration variable. See sbuild.conf(5) for more information. --autopkgtest-virt-server-opt=string Pass the specified option directly to the respective autopkgtest-virt-* virtualization server in addition to the options already passed by sbuild. This option can be passed multiple times (once per autopkgtest-virt-* option) and can be freely mixed with the --autopkgtest-virt-server-opts option. Options will be passed to the respective autopkgtest-virt-* virtualization server in the order that the --autopkgtest-virt-server-opt and --autopkgtest-virt-server-opts options are given on the command line. See the manual pages of the respective autopkgtest- virt-* commands for more information. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section OPTION STRING PERCENT ESCAPES for more information. This command line option appends to the AUTOPKGTEST_VIRT_SERVER_OPTIONS configuration variable. See sbuild.conf(5) for more information. --autopkgtest-virt-server-opts=options Pass the specified options directly to the respective autopkgtest-virt-* virtualization server in addition to the options already passed by sbuild. The argument will be split by whitespaces and the resulting array passed to the autopkgtest-virt-* invocation. If any options contain spaces, use --autopkgtest-virt-server-opt for them. This option can be passed multiple times and can be freely mixed with the --autopkgtest-virt-server-opts option. Options will be passed to the respective autopkgtest-virt-* virtualization server in the order that the --autopkgtest-virt-server-opt and --autopkgtest-virt-server-opts options are given on the command line. See the manual pages of the respective autopkgtest-virt-* commands for more information. Certain percent escapes are supported. To write a literal percent sign, escape it with another percent sign. See the section OPTION STRING PERCENT ESCAPES for more information. This command line option appends to the AUTOPKGTEST_VIRT_SERVER_OPTIONS configuration variable. See sbuild.conf(5) for more information. --sbuild-mode=mode Behaviour changes for use in a buildd environment. This command line option sets the SBUILD_MODE configuration variable. See sbuild.conf(5) for more information. --stats-dir=directory Directory for writing build statistics to. This command line option sets the STATS_DIR configuration variable. See sbuild.conf(5) for more information. --purge-extra-packages This is an experimental option. Only use when you know what you are doing. Source packages must be buildable with only their build dependencies, all packages marked as Essential:yes, the build-essential package and their transitive dependencies installed. But by default, most chroots will also include Priority:required packages and apt as well as their transitive dependencies. This option will try to remove all additional packages that are not strictly required for the build right after build dependencies were installed. This currently works best with the aspcud resolver. The apt resolver will not make as much effort to remove all unneeded packages and will keep all providers of a virtual package and all packages from any dependency alternative that happen to be installed. The aptitude and xapt resolver do not implement this feature yet. The removed packages are not (yet) added again after the build finished. This can have undesirable side effects like lintian not working (because there is no apt to install its dependencies) or bare chroots becoming totally unusable after apt was removed from them. Thus, this option should only be used with throw-away chroots like schroot provides them where the original state is automatically restored after each build. This command line option sets the PURGE_EXTRA_PACKAGES configuration variable. See sbuild.conf(5) for more information. --bd-uninstallable-explainer=dose3|apt If the build dependencies cannot be satisfied by the chosen resolver, sbuild will run the selected method to give a better explanation why the build dependencies cannot be installed. Possible arguments for this option are dose3 (the default) and apt. To disable this feature, pass the empty string. Depending on the resolver, the dose3 explainer might report a dependency situation as satisfiable even if the chosen resolver found it to be unsatisfiable. This is especially likely to happen if the apt resolver (the default) is used. Such disparities can have two reasons: either the understanding of the involved dependency situation of the apt and dose3 solver differs (this is a bug) or the apt solver was unable to find a solution if the dependency situation is not trivial (for example if it involves packages from multiple repositories). In the former case, please report the disparity as a bug against the resolvers. In the latter case, use a resolver that is more likely to find a solution like the aptitude or aspcud resolvers. Especially the aspcud resolver should find a solution if and only if the dose3 solver also finds one. This command line option sets the BD_UNINSTALLABLE_EXPLAINER configuration variable. See sbuild.conf(5) for more information.
CHROOT MODES
The main purpose of sbuild is to build Debian packages in a clean chroot environment. Provisioning and managing these chroot environments is not done by sbuild itself but by multiple backends. The default backend (or chroot mode) is schroot which is an suid binary that allows regular users to enter a chroot environment. But sbuild also allows one to build packages in a qemu virtual machine, lxc, lxd or on a remote host reached by ssh using the autopkgtest backend. The backend can be chosen using the --chroot-mode command line argument or the $chroot_mode configuration parameter. schroot The default and recommended chroot mode. It is also used on Debian buildd machines. The easiest way to set up sbuild for use with the schroot backend is by using sbuild-createchroot which will also write out the necessary schroot configuration files in /etc. To use the chroots, the current user has to be added to the sbuild group, for example by running sbuild-adduser. Updating these schroot backends can be done using sbuild-update. See the respective man pages for more information about how to use these programs. Schroot supports chroots from directories, tarballs, filesystem images and block devices. Schroot provides ephemeral chroots either by unpacking a tarball into a temporary directory, by using an overlay filesystem for directory chroots or by using btrfs or lvm snapshots. Chroots usable by schroot are defined by configuration files in /etc/schroot/chroot.d/. When building for a specific distribution and architecture, sbuild will choose the chroot that is named (or has the alias) $distribution-$arch-sbuild, $distribution-sbuild, $distribution-$arch or $distribution, in that order of preference. The used chroot name can be overridden using the -c or --chroot options. sudo This chroot mode is deprecated and only provided for backwards compatibility and testing purposes. It operates by plainly entering the chosen chroot directory using "sudo chroot". Thus, this backend also does not provide ephemeral chroots. The sudo chroot mode searches for a symlink or directory located at /etc/sbuild/chroot/ or in the current directory, prefixed with chroot-. The expected names are resolved in the same order as for the schroot chroot mode and can be overridden using the -c or --chroot options. autopkgtest This is an experimental chroot mode that allows one to build packages in any chroot supported by autopkgtest. This allows one to build packages in lxc or lxd containers, a qemu virtual machine or on a remote host via ssh. Which autopkgtest server to use is determined via the --autopkgtest-virt-server option. Since autopkgtest (in contrast to schroot) does not maintain a registry of available containers or (virtual) machines, it is necessary to manually specify them using the --autopkgtest-virt-server-opts= command line argument. To avoid having to manually type the right container or machine name every time when sbuild is executed, percent escapes are permitted. unshare This is an experimental backend that allows one to build packages inside chroots provided by arbitrary tarballs. This allows one to set up an arbitrary build environment without having to become root. Building packages with schroot also doesn't require sudo (schroot is suid root) but setting up and updating chroots requires superuser permissions. The unshare backend only makes use of two small suid binaries (newuidmap and newgidmap) and only requires root once for enabling unprivileged userns clones (Debian carries a patch against the Linux kernel that disables this feature by detault). So after setting kernel.unprivileged_userns_clone=1 /etc/sysctl.d/, this backend allows arbitrary tarballs containing chroot environments to be used for package building. The default tarball location is in ~/.cache/sbuild/. The expected names are resolved in the same order as for the schroot chroot mode and can be overridden using the -c or --chroot options.
BUILD ARTIFACTS
Sbuild is meant to be used to build architecture specific binary packages from a given source package. In addition, sbuild is also able to generate architecture independent binary packages as well as to rebuild the original source package that was used as input. In summary, sbuild is able to build architecture specific binary packages, architecture independent binary packages and source packages. What ends up being built is determined by the configuration variables BUILD_ARCH_ANY, BUILD_ARCH_ALL and BUILD_SOURCE, respectively. See sbuild.conf(5) for a detailed explanation of these configuration variables. By default, during native compilation, BUILD_ARCH_ANY and BUILD_ARCH_ALL are set to true while BUILD_SOURCE is set to false. During cross-compilation, BUILD_ARCH_ALL defaults to false. This behaviour can be changed either by using command line options or by modifying the configuration variables in your ~/.sbuildrc. The relevant command line options to change the values of BUILD_ARCH_ANY, BUILD_ARCH_ALL and BUILD_SOURCE are --arch-any/--no- arch-any, --arch-all/--no-arch-all and --source/--no-source, respectively. The values of BUILD_ARCH_ANY, BUILD_ARCH_ALL and BUILD_SOURCE change the parameter that dpkg-buildpackage is called with. The following table displays the argument passed to dpkg-buildpackage in the last column depending on the configuration options in the first three columns. BUILD_ARCH_ANY BUILD_ARCH_ALL BUILD_SOURCE dpkg-buildpackage flag ──────────────────────────────────────────────────────────────────────── false false false invalid false false true -S false true false -A false true true -g true false false -B true false true -G true true false -b true true true no option
EXTERNAL COMMANDS
Support to run external commands during an sbuild run is provided. A set of external commands can be run at various stages of a build. Providing commands to run is done through the appropriate options given on the command line and through the use of the configuration files. In the configuration file, the list of commands to run are placed in a hash of arrays of arrays of strings corresponding to the commands to run. There are several sets of commands. All command are run inside the chroot as root except for the pre/post-build- commands which are run as the user running sbuild outside of the chroot. To run an external command as another user than the root user, prefix your command with runuser -u sbuild --. Here is a summary of the ordering, user, internal/external to chroot for each command hook The following table shows each command hook in the context of the tasks sbuild performs. The column root shows whether the command is run as root (yes) or not (no). The column chroot shows whether the command is run inside our outside the chroot. The working directory inside the chroot is the one marked with <<BUILDDIR>> inside the log. By default, this is a directory of the format /build/packagename-XXXXXX/ where XXXXXX is a random ascii string. Otherwise, it is the directory set by --build-path or by the BUILD_PATH configuration option. The working directory outside of the chroot is $HOME. The remaining columns show the percent escapes that are defined in each command. Percent escapes that are available in all commands (%%, %a, %b, %s) are omitted. The value maybe in the column for the %d and %p escapes means that the value can not relied upon to be defined in these stages. More specifically, these escapes will not be defined at these points if the user specified a source package name without a version on the command line. In that case, the version will only become known after the source package has been retrieved in the "Fetch and unpack source package" stage. command/action root chroot %c %e %d,%p ────────────────────────────────────────────────────────────────────────── Initialise chroot session --pre-build-commands no outside no yes maybe Setup the chroot and variables --chroot-setup-commands yes inside no no maybe Update and upgrade packages --chroot-update-failed-commands yes inside no no maybe Fetch and unpack source package Install Dependencies --build-deps-failed-commands yes inside no no yes --starting-build-commands yes inside no no yes Run dpkg-buildpackage --build-failed-commands yes inside no no yes --finished-build-commands yes inside no no yes Run lintian (if configured) --chroot-cleanup-commands yes inside yes no yes Cleanup build files and dependencies Run piuparts (if configured) Run autopkgtest (if configured) Close schroot session --post-build-commands no outside yes yes yes --post-build-failed-commands no outside yes yes yes The commands can be given in the configuration files. They can be given as strings or as a list of arguments. For example, to run "foo" and "bar" with arguments before a build starts, specifying the "foo" command as a list and "bar" as a string, one could do this: $external_commands = { "pre-build-commands" => [ ['foo', 'arg1', 'arg2'], 'bar arg1 arg2 arg3', ], }; Hash keys for commands to run at other stages have the same name as their corresponding command-line option name without the preceding '--'. Here's an example of how to do the same with the previous example, except using the --pre-build-commands option. $ sbuild \ --pre-build-commands='foo arg1 arg2' \ --pre-build-commands='bar arg1 arg2 arg3' Note that all these commands are executed through the shell in "/bin/sh". If specifying the command as a list in the config file, very few shell facilities are supported: no redirection, no command concatenation with ; and so on. When passing a string (in the config file or on the commandline), the string is passed as-is to the shell. So all shell facilities are available, given that you escape everything properly, as you would in an interactive shell. Besides running external commands, sbuild can also detect the use of certain percent escapes given as arguments. These are used to allow for a command to be supplied with a certain argument depending on the escape given. For example, it could be possible to have an external command be given the path to a .changes file. Here is a listing of keywords and a description of what it's converted to. %% Used to escape a '%'. %d, %SBUILD_DSC These escapes are converted to the absolute path to a package's .dsc file. %c, %SBUILD_CHANGES These escapes are converted to the absolute path to a package's source .changes file. This is the .changes file generated by the dpkg-buildpackage invocation and not the source-only .changes file that might've been produced additionally via --source-only-changes. This variable is only set after the build is finished, i.e in --chroot-cleanup-commands, --post-build-commands, and --post-build-failed-commands. %a, %SBUILD_HOST_ARCH These escapes are converted to the debian name of the architecture the build is being built for (e.g amd64, armhf). %e, %SBUILD_CHROOT_EXEC These escapes are converted to a command which can be executed on a host and can be given arguments which will then be executed inside the chroot. Standard input and output of the process started inside the chroot are connected to the program executed on the host. Thus, this command can also be used to copy data into the chroot and out of the chroot. The working directory of the process started inside the chroot is the root directory of the chroot. The process is started as the root user. This variable is not set if the external command is run inside the chroot. Thus this escape is only available for --pre-build-commands, --post-build-commands, and --post-build-failed-commands. %b, %SBUILD_BUILD_DIR These escapes are converted to the absolute path to the build directory inside the chroot. %p, %SBUILD_PKGBUILD_DIR These escapes are converted to the absolute path to the package build directory inside the chroot. %s, %SBUILD_SHELL This is converted to a command to spawn an interactive "bash" shell %SBUILD_BUILD_ARCH This escape is converted to the Debian name of the architecture that the build is being run on (e.g amd64, armhf). Percent escapes are only substituted when an appropriate value is defined for them. At other times, it is left unchanged. In practice this means that there are only two escapes that are not available in all external commands: %c and %e. For example, a .changes file is only defined at the end of a build, so using %c will only be substituted for post- build-commands and post-build-failed-commands. Here's an example of using an escape to run a program foo on a .changes file after a build is done. $ sbuild --post-build-commands \ 'foo %SBUILD_CHANGES' And here's an example that will spawn an interactive shell to investigate the problem whenever the build failed: $ sbuild --build-failed-commands '%SBUILD_SHELL' The following example would copy a file from the host into the chroot: $ sbuild --pre-build-commands \ 'cat blub.txt | %SBUILD_CHROOT_EXEC sh -c "cat > blub.txt"' One final note, external commands are processed in the order they are given. Also, the commands given in a configuration file are processed first, then the commands given through the command line options.
OPTION STRING PERCENT ESCAPES
Besides for external command strings, percent escapes can also be used in custom options passed to piuparts, autopkgtest and the chosen autopkgtest-virt server. This is for example useful for communicating the right chroot backend to piuparts or autopkgtest depending on the distribution or architecture the source package was built for. Here is a listing of keywords and a description of what it's converted to. %% Used to escape a '%'. %a, %SBUILD_HOST_ARCH These escapes are converted to the debian name of the architecture the build is being built for (e.g amd64, armhf). %r, %SBUILD_DISTRIBUTION The distribution that the source package was built for. This is the value recorded in debian/changelog or the value passed via the --dist option. Mnemonic: the r is the first letter in "release". Here is an example that will run piuparts with the right schroot chroot: $ sbuild --run-piuparts \ --piuparts-opts="--schroot=%r-%a-sbuild" Or an example of running autopkgtest with the right schroot chroot: $ sbuild --run-autopkgtest --autopkgtest-root-args= \ --autopkgtest-opts="-- schroot %r-%a-sbuild" To achieve the same effect via the configuration file, add the following: $autopkgtest_root_args = ''; $piuparts_opts = [ '--schroot=%r-%a-sbuild' ]; $autopkgtest_opts = [ '--', 'schroot', '%r-%a-sbuild' ]; The --autopkgtest-root-args option and the $autopkgtest_root_args configuration variable are set to the empty string because the default is to run autopkgtest with "sudo --" in front of it which is not needed with the schroot autopkgtest backend.
LOCAL ARCHIVE
The apt and aptitude resolvers create a local archive for installing build dependencies. This is an internal implementation detail of the build dependency resolver, which is not user configurable, and is intended to be entirely transparent to the user. The local archive exists only transiently during the package build. It does not persist across builds, and it is only used to store the dummy dependency packages created for a single build. The dependency resolvers do the following: • Create a dummy dependency package. This contains the Build-Depends (and optionally Build-Depends-Arch and Build-Depends-Indep) as Depends, and Build-Conflicts (and optionally Build-Conflicts-Arch and Build-Conflicts-Indep) as Conflicts. • Install the dummy dependency package into the local archive, • Generate the Packages, Sources and Release files. • Write a sources.list file for the local archive into /etc/apt/sources.list.d. • Inject the lists directly into /var/lib/apt/lists. This step is to save running updating all apt sources which is undesirable during a build; apt and aptitude do not support updating a single source at present. • Regenerate the apt caches to ensure everything is in sync. • Install the dummy dependency package with apt or aptitude; the dummy package is pulled from the local apt archive, while all its dependencies are pulled from the regular configured apt sources. At the end of the build, the local archive is removed, along with the rest of the build tree.
EXAMPLES
Before you use sbuild for the first time, you have to do some setup depending on the chroot mode you are using. The default chroot mode is schroot. To use sbuild with the schroot backend, you need to add your user to the sbuild group and create a schroot chroot. The latter can be accomplished by using sbuild-createchroot(8). After this one time setup, you can now use sbuild to build packages like this: % sbuild -d unstable bash Or on a .dsc: % sbuild -d unstable bash.dsc Or from within an unpacked source package (the -d parameter is not necessary here because the distribution is inferred from debian/changelog): % sbuild
ENVIRONMENT VARIABLES
The following environment variables are used by sbuild: HOME The home directory of the user. LOGNAME Used in lockfiles. SBUILD_CONFIG Path to an additional configuration file on top of the system wide and user specific ones.
FILES
/etc/sbuild/sbuild.conf Configuration, maintained by the system administrator. This may be used to override the defaults. /etc/sbuild/chroot Directory containing symbolic links to chroots. This is only used for sudo chroot access; schroot access uses the schroot chroot configuration. ~/.sbuildrc User-specific configuration. A custom path to a configuration file can also be specified through setting the SBUILD_CONFIG environment variable to the path of an additional configuration file. /var/lib/sbuild Build trees, archive signing keys, build statistics and lock files.
AUTHORS
Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>. sbuild is based on debbuild, written by James Troup <james@nocrew.org> and has been modified by Ben Collins <bcollins@debian.org>, Ryan Murray <rmurray@debian.org>, Francesco Paolo Lovergine <frankie@debian.org>, Michael Banck <mbanck@debian.org>, and Roger Leigh <rleigh@debian.org>
COPYRIGHT
Copyright © 1998-2000 Roman Hodek <roman@hodek.net> Copyright © 1998-1999 James Troup <troup@debian.org> Copyright © 2003-2006 Ryan Murray <rmurray@debian.org> Copyright © 2001-2003 Rick Younie <younie@debian.org> Copyright © 2003-2004 Francesco Paolo Lovergine <frankie@debian.org> Copyright © 2005 Michael Banck <mbanck@debian.org> Copyright © 2005-2009 Roger Leigh <rleigh@debian.org>
SEE ALSO
sbuild.conf(5), sbuild-abort(1), sbuild-adduser(8), sbuild-apt(1), sbuild-checkpackages(1), sbuild-createchroot(8), sbuild-distupgrade(1), sbuild-hold(1), sbuild-setup(7). sbuild-shell(1), sbuild-unhold(1), sbuild-update(1), sbuild-upgrade(1), schroot(1),