Ubuntu Manpage: time - run programs and summarize system resource usage

NAME

       time - run programs and summarize system resource usage

SYNOPSIS

       time   [ -apqvV ] [ -f FORMAT ] [ -o FILE ]
              [ --append ] [ --verbose ] [ --quiet ] [ --portability ]
              [ --format=FORMAT ] [ --output=FILE ] [ --version ]
              [ --help ] COMMAND [ ARGS ]

DESCRIPTION

       time run the program COMMAND with any given arguments ARG....  When COMMAND finishes, time displays
       information about resources used by COMMAND (on the standard error output, by default).  If COMMAND exits
       with non-zero status, time displays a warning message and the exit status.

       time determines which information to display about the resources used by the COMMAND from the string
       FORMAT.  If no format is specified on the command line, but the TIME environment variable is set, its
       value is used as the format.  Otherwise, a default format built into time is used.

       Options to time must appear on the command line before COMMAND.  Anything on the command line after
       COMMAND is passed as arguments to COMMAND.

OPTIONS

       -o FILE, --output=FILE
              Write  the  resource  use statistics to FILE instead of to the standard error stream.  By default,
              this overwrites the file, destroying the file's previous contents.   This  option  is  useful  for
              collecting  information  on  interactive programs and programs that produce output on the standard
              error stream.

       -a, --append
              Append the resource use information to the output file instead of overwriting it.  This option  is
              only useful with the `-o' or `--output' option.

       -f FORMAT, --format FORMAT
              Use FORMAT as the format string that controls the output of time.  See the below more information.

       --help Print a summary of the command line options and exit.

       -p, --portability
              Use the following format string, for conformance with POSIX standard 1003.2:
                        real %e
                        user %U
                        sys %S

       -v, --verbose
              Use  the  built-in  verbose  format,  which  displays  each  available piece of information on the
              program's resource use on its own line, with an English description of its meaning.

       --quiet
              Do not report the status of the program even if it is different from zero.

       -V, --version
              Print the version number of time and exit.

FORMATTING THE OUTPUT

The format string FORMAT controls the contents of the time output. The format string can be set using
the `-f' or `--format', `-v' or `--verbose', or `-p' or `--portability' options. If they are not given,
but the TIME environment variable is set, its value is used as the format string. Otherwise, a built-in
default format is used. The default format is:
%Uuser %Ssystem %Eelapsed %PCPU (%Xtext+%Ddata %Mmax)k
%Iinputs+%Ooutputs (%Fmajor+%Rminor)pagefaults %Wswaps

The format string usually consists of `resource specifiers' interspersed with plain text. A percent sign
(`%') in the format string causes the following character to be interpreted as a resource specifier,
which is similar to the formatting characters in the printf(3) function.

A backslash (`\') introduces a `backslash escape', which is translated into a single printing character
upon output. `\t' outputs a tab character, `\n' outputs a newline, and `\\' outputs a backslash. A
backslash followed by any other character outputs a question mark (`?') followed by a backslash, to
indicate that an invalid backslash escape was given.

Other text in the format string is copied verbatim to the output. time always prints a newline after
printing the resource use information, so normally format strings do not end with a newline character (or
`\n').

There are many resource specifications. Not all resources are measured by all versions of Unix, so some
of the values might be reported as zero. Any character following a percent sign that is not listed in
the table below causes a question mark (`?') to be output, followed by that character, to indicate that
an invalid resource specifier was given.

The resource specifiers, which are a superset of those recognized by the tcsh(1) builtin `time' command,
are:
% A literal `%'.
C Name and command line arguments of the command being timed.
D Average size of the process's unshared data area, in Kilobytes.
E Elapsed real (wall clock) time used by the process, in [hours:]minutes:seconds.
F Number of major, or I/O-requiring, page faults that occurred while the process was running.
These are faults where the page has actually migrated out of primary memory.
I Number of file system inputs by the process.
K Average total (data+stack+text) memory use of the process, in Kilobytes.
M Maximum resident set size of the process during its lifetime, in Kilobytes.
O Number of file system outputs by the process.
P Percentage of the CPU that this job got. This is just user + system times divided by the
total running time. It also prints a percentage sign.
R Number of minor, or recoverable, page faults. These are pages that are not valid (so they
fault) but which have not yet been claimed by other virtual pages. Thus the data in the
page is still valid but the system tables must be updated.
S Total number of CPU-seconds used by the system on behalf of the process (in kernel mode),
in seconds.
U Total number of CPU-seconds that the process used directly (in user mode), in seconds.
W Number of times the process was swapped out of main memory.
X Average amount of shared text in the process, in Kilobytes.
Z System's page size, in bytes. This is a per-system constant, but varies between systems.
c Number of times the process was context-switched involuntarily (because the time slice
expired).
e Elapsed real (wall clock) time used by the process, in seconds.
k Number of signals delivered to the process.
p Average unshared stack size of the process, in Kilobytes.
r Number of socket messages received by the process.
s Number of socket messages sent by the process.
t Average resident set size of the process, in Kilobytes.
w Number of times that the program was context-switched voluntarily, for instance while
waiting for an I/O operation to complete.
x Exit status of the command.

EXAMPLES

       To run the command `wc /etc/hosts' and show the default information:
            time wc /etc/hosts

       To run the command `ls -Fs' and show just the user, system, and total time:
            time -f "\t%E real,\t%U user,\t%S sys" ls -Fs

       To edit the file BORK and have `time' append the elapsed time and number of signals to  the  file  `log',
       reading the format string from the environment variable `TIME':
            export TIME="\t%E,\t%k" # If using bash or ksh
            setenv TIME "\t%E,\t%k" # If using csh or tcsh
            time -a -o log emacs bork

       Users  of  the  bash shell need to use an explicit path in order to run the external time command and not
       the shell builtin variant.  On system where time is installed in /usr/bin, the first example would become
            /usr/bin/time wc /etc/hosts

ACCURACY

       The elapsed time is not collected atomically with the execution of the program; as a result,  in  bizarre
       circumstances  (if  the  time command gets stopped or swapped out in between when the program being timed
       exits and when time calculates how long it took to  run),  it  could  be  much  larger  than  the  actual
       execution time.

       When  the  running  time of a command is very nearly zero, some values (e.g., the percentage of CPU used)
       may be reported as either zero (which is wrong) or a question mark.

       Most information shown by time is derived from the wait3(2) system call.  The numbers are only as good as
       those returned by wait3(2).  On systems that do not have a wait3(2) call that returns status information,
       the times(2) system call is used instead.  However, it provides much less information than  wait3(2),  so
       on those systems time reports the majority of the resources as zero.

       The  `%I' and `%O' values are allegedly only `real' input and output and do not include those supplied by
       caching devices.  The meaning of `real' I/O reported by `%I' and `%O' may be  muddled  for  workstations,
       especially diskless ones.

DIAGNOSTICS

       The  time  command  returns  when the program exits, stops, or is terminated by a signal.  If the program
       exited normally, the return value of time is the return value of the program it  executed  and  measured.
       Otherwise,  the  return  value  is  128 plus the number of the signal which caused the program to stop or
       terminate.

AUTHOR

       time was written by David MacKenzie.  This man page was added by Dirk Eddelbuettel <edd@debian.org>,  the
       Debian  GNU/Linux  maintainer,  for use by the Debian GNU/Linux distribution but may of course be used by
       others.