Provided by: uftrace_0.9.3-1ubuntu1_amd64 
NAME
uftrace-graph - Show function call graph
SYNOPSIS
uftrace graph [options] [FUNCTION]
DESCRIPTION
This command shows a function call graph for the binary or the given function in a uftrace record
datafile. If the function name is omitted, whole function call graph will be shonw. If user gives a
function name it will show backtrace and calling functions. Each function in the output is annotated
with a hit count and the total time spent running that function.
GRAPH OPTIONS
-f FIELD, --output-fields=FIELD
Customize field in the output. Possible values are: total, self and addr. Multiple fields can be
set by using comma. Special field of `none' can be used (solely) to hide all fields. Default is
`total'. See FIELDS.
COMMON OPTIONS
-F FUNC, --filter=FUNC
Set filter to trace selected functions only. This option can be used more than once. See uf‐
trace-replay(1) for an explanation of filters.
-N FUNC, --notrace=FUNC
Set filter not to trace selected functions (or the functions called underneath them). This option
can be used more than once. See uftrace-replay(1) for an explanation of filters.
-C FUNC, --caller-filter=FUNC
Set filter to trace callers of selected functions only. This option can be used more than once.
See uftrace-replay(1) for an explanation of filters.
-T TRG, --trigger=TRG
Set trigger on selected functions. This option can be used more than once. See uftrace-replay(1)
for an explanation of triggers.
-D DEPTH, --depth DEPTH
Set trace limit in nesting level.
-t TIME, --time-filter=TIME
Do not show functions which run under the time threshold. If some functions explicitly have the
`trace' trigger applied, those are always traced regardless of execution time.
--no-libcall
Do not show library calls.
--no-event
Do not show any events.
--match=TYPE
Use pattern match using TYPE. Possible types are regex and glob. Default is regex.
COMMON ANALYSIS OPTIONS
--kernel-full
Show all kernel functions called outside of user functions.
--kernel-only
Show kernel functions only without user functions.
--event-full
Show all (user) events outside of user functions.
--tid=TID[,TID,...]
Only print functions called by the given threads. To see the list of threads in the data file,
you can use uftrace report --threads or uftrace info. This option can also be used more than
once.
--demangle=TYPE
Use demangled C++ symbol names for filters, triggers, arguments and/or return values. Possible
values are “full”, “simple” and “no”. Default is “simple” which ignores function arguments and
template parameters.
-r RANGE, --time-range=RANGE
Only show functions executed within the time RANGE. The RANGE can be <start>~<stop> (separated by
“~”) and one of <start> and <stop> can be omitted. The <start> and <stop> are timestamp or
elapsed time if they have <time_unit> postfix, for example `100us'. The timestamp or elapsed time
can be shown with -f time or -f elapsed option respectively in uftrace replay(1).
EXAMPLES
This command show data like below:
$ uftrace record loop
$ uftrace replay
# DURATION TID FUNCTION
[24447] | main() {
[24447] | foo() {
8.134 us [24447] | loop();
7.296 us [24447] | loop();
7.234 us [24447] | loop();
24.324 us [24447] | } /* foo */
[24447] | foo() {
7.234 us [24447] | loop();
7.231 us [24447] | loop();
7.231 us [24447] | loop();
22.302 us [24447] | } /* foo */
[24447] | bar() {
10.100 ms [24447] | usleep();
10.138 ms [24447] | } /* bar */
10.293 ms [24447] | } /* main */
Running the graph command shows function call graph like below:
$ uftrace graph
# Function Call Graph for 'loop' (session: 073f1e84aa8b09d3)
========== FUNCTION CALL GRAPH ==========
10.293 ms : (1) loop
10.293 ms : (1) main
46.626 us : +-(2) foo
44.360 us : | (6) loop
: |
10.138 ms : +-(1) bar
10.100 ms : (1) usleep
The topmost node is not for function but for the executable. The left side shows total time running the
function on the right side. The number in parentheses before the function name is the invocation count.
As you can see, main was called once and ran around 10 msec. It called foo twice and then foo called
loop 6 times in total. The time is the sum of all execution time of the function.
It can also be seen that main called bar once and that bar then called usleep once. To avoid too deep
nesting level, it shows calls that have only a single call path at the same level. So usleep is not
called from main directly.
Running the graph command on the main function shows called functions and backtrace like below:
$ uftrace graph main
# Function Call Graph for 'main' (session: 073f1e84aa8b09d3)
=============== BACKTRACE ===============
backtrace #0: hit 1, time 10.293 ms
[0] main (0x4004f0)
========== FUNCTION CALL GRAPH ==========
# TOTAL TIME FUNCTION
10.293 ms : (1) main
46.626 us : +-(2) foo
44.360 us : | (6) loop
: |
10.138 ms : +-(1) bar
10.100 ms : (1) usleep
Note that the `main' is the top-level function so it has no backtrace above itself. Running graph com‐
mand on a leaf function looks like below.
$ uftrace graph loop
# Function Call Graph for 'loop' (session: 073f1e84aa8b09d3)
=============== BACKTRACE ===============
backtrace #0: hit 6, time 44.360 us
[0] main (0x4004b0)
[1] foo (0x400622)
[2] loop (0x400f5f6)
========== FUNCTION CALL GRAPH ==========
# TOTAL TIME FUNCTION
44.360 us : (6) loop
The backtrace shows that loop is called from foo and that foo is called from main. Since loop is a leaf
function, it didn’t call any other function. In this case, loop was called only from a single path so
backtrace #0 is hit 6 times.
FIELDS
The uftrace allows for user to customize the graph output with some of fields. Here the field means info
on the left side of the colon (:) character. By default it uses time only, but you can use other fields
in any order like:
$ uftrace record tests/t-abc
$ uftrace graph -f total,self,addr
# Function Call Graph for 't-sort' (session: b007f4b7cf792878)
========== FUNCTION CALL GRAPH ==========
# TOTAL TIME SELF TIME ADDRESS FUNCTION
10.145 ms 561f652cd610 : (1) t-sort
10.145 ms 39.890 us 561f652cd610 : (1) main
16.773 us 0.734 us 561f652cd7ce : +-(2) foo
16.039 us 16.039 us 561f652cd7a0 : | (6) loop
: |
10.088 ms 14.740 us 561f652cd802 : +-(1) bar
10.073 ms 10.073 ms 561f652cd608 : (1) usleep
Each field has following meaning:
• total: function execution time in total
• self : function execution time excluding its children’s
• addr : address of the function
The default value is `total'. If given field name starts with “+”, then it’ll be appended to the default
fields. So “-f +addr” is as same as “-f total,addr”. And it also accepts a special field name of `none'
which disables the field display and shows function output only.
$ uftrace graph -f none
# Function Call Graph for 't-sort' (session: b007f4b7cf792878)
========== FUNCTION CALL GRAPH ==========
(1) t-sort
(1) main
+-(2) foo
| (6) loop
|
+-(1) bar
(1) usleep
This output can be useful when comparing two different call graph outputs using diff tool.
SEE ALSO
uftrace(1), uftrace-record(1), uftrace-replay(1), uftrace-tui(1)
AUTHORS
Namhyung Kim <namhyung@gmail.com>.
Uftrace User Manuals Sep, 2018 UFTRACE-GRAPH(1)