Ubuntu Manpage: auditon — configure system audit parameters

Provided by: freebsd-manpages_12.0-1_all

NAME

       auditon — configure system audit parameters

SYNOPSIS

       #include <bsm/audit.h>

       int
       auditon(int cmd, void *data, u_int length);

DESCRIPTION

The auditon() system call is used to manipulate various audit control operations. The data argument
should point to a structure whose type depends on the command. The length argument specifies the size of
*data in bytes. The cmd argument may be any of the following:

A_SETPOLICY Set audit policy flags. The data argument must point to a int value set to one or more
the following audit policy control values bitwise OR'ed together: AUDIT_CNT, AUDIT_AHLT,
AUDIT_ARGV, and AUDIT_ARGE. If AUDIT_CNT is set, the system will continue even if it
becomes low on space and discontinue logging events until the low space condition is
remedied. If it is not set, audited events will block until the low space condition is
remedied. Unaudited events, however, are unaffected. If AUDIT_AHLT is set, a panic(9)
if it cannot write an event to the global audit log file. If AUDIT_ARGV is set, then
the argument list passed to the execve(2) system call will be audited. If AUDIT_ARGE is
set, then the environment variables passed to the execve(2) system call will be audited.
The default policy is none of the audit policy control flags set.

A_SETKAUDIT Set the host information. The data argument must point to a auditinfo_addr_t structure
containing the host IP address information. After setting, audit records that are
created as a result of kernel events will contain this information.

A_SETKMASK Set the kernel preselection masks (success and failure). The data argument must point
to a au_mask_t structure containing the mask values as defined in <bsm/audit.h>. These
masks are used for non-attributable audit event preselection. The field am_success
specifies which classes of successful audit events are to be logged to the audit trail.
The field am_failure specifies which classes of failed audit events are to be logged.
The value of both fields is the bitwise OR'ing of the audit event classes specified in
bsm/audit.h. The various audit classes are described more fully in audit_class(5).

A_SETQCTRL Set kernel audit queue parameters. The data argument must point to a au_qctrl_t
structure (defined in <bsm/audit.h>) containing the kernel audit queue control settings:
aq_hiwater, aq_lowater, aq_bufsz, aq_delay, and aq_minfree. The field aq_hiwater
defines the maximum number of audit record entries in the queue used to store the audit
records ready for delivery to disk. New records are inserted at the tail of the queue
and removed from the head. For new records which would exceed the high water mark, the
calling thread is inserted into the wait queue, waiting for the audit queue to have
enough space available as defined with the field aq_lowater. The field aq_bufsz defines
the maximum length of the audit record that can be supplied with audit(2). The field
aq_delay is unused. The field aq_minfree specifies the minimum amount of free blocks on
the disk device used to store audit records. If the value of free blocks falls below
the configured minimum amount, the kernel informs the audit daemon about low disk space.
The value is to be specified in percent of free file system blocks. A value of 0
results in a disabling of the check. The default and maximum values (default/maximum)
for the audit queue control parameters are:

aq_hiwater 100/10000 (audit records)
aq_lowater 10/aq_hiwater (audit records)
aq_bufsz 32767/1048576 (bytes)
aq_delay (Not currently used.)

A_SETSTAT Return ENOSYS. (Not implemented.)

A_SETUMASK Return ENOSYS. (Not implemented.)

A_SETSMASK Return ENOSYS. (Not implemented.)

A_SETCOND Set the current auditing condition. The data argument must point to a int value
containing the new audit condition, one of AUC_AUDITING, AUC_NOAUDIT, or AUC_DISABLED.
If AUC_NOAUDIT is set, then auditing is temporarily suspended. If AUC_AUDITING is set,
auditing is resumed. If AUC_DISABLED is set, the auditing system will shutdown,
draining all audit records and closing out the audit trail file.

A_SETCLASS Set the event class preselection mask for an audit event. The data argument must point
to a au_evclass_map_t structure containing the audit event and mask. The field
ec_number is the audit event and ec_class is the audit class mask. See audit_event(5)
for more information on audit event to class mapping.

A_SETPMASK Set the preselection masks for a process. The data argument must point to a
auditpinfo_t structure that contains the given process's audit preselection masks for
both success and failure. The field ap_pid is the process id of the target process.
The field ap_mask must point to a au_mask_t structure which holds the preselection masks
as described in the A_SETKMASK section above.

A_SETFSIZE Set the maximum size of the audit log file. The data argument must point to a
au_fstat_t structure with the af_filesz field set to the maximum audit log file size. A
value of 0 indicates no limit to the size.

A_GETCLASS Return the event to class mapping for the designated audit event. The data argument
must point to a au_evclass_map_t structure. See the A_SETCLASS section above for more
information.

A_GETKAUDIT Get the current host information. The data argument must point to a auditinfo_addr_t
structure.

A_GETPINFO Return the audit settings for a process. The data argument must point to a auditpinfo_t
structure which will be set to contain ap_auid (the audit ID), ap_mask (the preselection
mask), ap_termid (the terminal ID), and ap_asid (the audit session ID) of the given
target process. The process ID of the target process is passed into the kernel using
the ap_pid field. See the section A_SETPMASK above and getaudit(2) for more
information.

A_GETPINFO_ADDR Return the extended audit settings for a process. The data argument must point to a
auditpinfo_addr_t structure which is similar to the auditpinfo_t structure described
above. The exception is the ap_termid (the terminal ID) field which points to a
au_tid_addr_t structure can hold much a larger terminal address and an address type.
The process ID of the target process is passed into the kernel using the ap_pid field.
See the section A_SETPMASK above and getaudit(2) for more information.

A_GETSINFO_ADDR Return the extended audit settings for a session. The data argument must point to a
auditinfo_addr_t structure. The audit session ID of the target session is passed into
the kernel using the ai_asid field. See getaudit_addr(2) for more information about the
auditinfo_addr_t structure.

A_GETKMASK Return the current kernel preselection masks. The data argument must point to a
au_mask_t structure which will be set to the current kernel preselection masks for non-
attributable events.

A_GETPOLICY Return the current audit policy setting. The data argument must point to a int value
which will be set to one of the current audit policy flags. The audit policy flags are
described in the A_SETPOLICY section above.

A_GETQCTRL Return the current kernel audit queue control parameters. The data argument must point
to a au_qctrl_t structure which will be set to the current kernel audit queue control
parameters. See the A_SETQCTL section above for more information.

A_GETFSIZE Returns the maximum size of the audit log file. The data argument must point to a
au_fstat_t structure. The af_filesz field will be set to the maximum audit log file
size. A value of 0 indicates no limit to the size. The af_currsz field will be set to
the current audit log file size.

A_GETCWD Return ENOSYS. (Not implemented.)

A_GETCAR Return ENOSYS. (Not implemented.)

A_GETSTAT Return ENOSYS. (Not implemented.)

A_GETCOND Return the current auditing condition. The data argument must point to a int value
which will be set to the current audit condition, one of AUC_AUDITING, AUC_NOAUDIT or
AUC_DISABLED. See the A_SETCOND section above for more information.

A_SENDTRIGGER Send a trigger to the audit daemon. The data argument must point to a int value set to
one of the acceptable trigger values: AUDIT_TRIGGER_LOW_SPACE (low disk space where the
audit log resides), AUDIT_TRIGGER_OPEN_NEW (open a new audit log file),
AUDIT_TRIGGER_READ_FILE (read the audit_control file), AUDIT_TRIGGER_CLOSE_AND_DIE
(close the current log file and exit), AUDIT_TRIGGER_NO_SPACE (no disk space left for
audit log file). AUDIT_TRIGGER_ROTATE_USER (request audit log file rotation).
AUDIT_TRIGGER_INITIALIZE (initialize audit subsystem for Mac OS X only). or
AUDIT_TRIGGER_EXPIRE_TRAILS (request audit log file expiration).

RETURN VALUES

       Upon successful completion, the value 0 is returned; otherwise the value -1 is returned  and  the  global
       variable errno is set to indicate the error.

ERRORS

       The auditon() function will fail if:

       [ENOSYS]           Returned by options not yet implemented.

       [EFAULT]           A failure occurred while data transferred to or from the kernel failed.

       [EINVAL]           Illegal argument was passed by a system call.

       [EPERM]            The process does not have sufficient permission to complete the operation.

       The  A_SENDTRIGGER command is specific to the FreeBSD and Mac OS X implementations, and is not present in
       Solaris.

HISTORY

       The  OpenBSM  implementation  was created by McAfee Research, the security division of McAfee Inc., under
       contract to Apple Computer Inc. in 2004.  It was subsequently adopted by the TrustedBSD  Project  as  the
       foundation for the OpenBSM distribution.

AUTHORS

       This  software  was  created  by  McAfee  Research, the security research division of McAfee, Inc., under
       contract to Apple Computer Inc.  Additional authors include Wayne Salamon, Robert Watson, and SPARTA Inc.

       The Basic Security Module (BSM) interface to audit records and audit event stream format were defined  by
       Sun Microsystems.

       This  manual  page  was written by Tom Rhodes <trhodes@FreeBSD.org>, Robert Watson <rwatson@FreeBSD.org>,
       and Wayne Salamon <wsalamon@FreeBSD.org>.

Debian                                            April 7, 2016                                       AUDITON(2)