Ubuntu Manpage: Pod::Usage - print a usage message from embedded pod documentation

Provided by: perl-doc_5.30.0-9ubuntu0.5_all

NAME

       Pod::Usage - print a usage message from embedded pod documentation

SYNOPSIS

         use Pod::Usage

         my $message_text  = "This text precedes the usage message.";
         my $exit_status   = 2;          ## The exit status to use
         my $verbose_level = 0;          ## The verbose level to use
         my $filehandle    = \*STDERR;   ## The filehandle to write to

         pod2usage($message_text);

         pod2usage($exit_status);

         pod2usage( { -message => $message_text ,
                      -exitval => $exit_status  ,
                      -verbose => $verbose_level,
                      -output  => $filehandle } );

         pod2usage(   -msg     => $message_text ,
                      -exitval => $exit_status  ,
                      -verbose => $verbose_level,
                      -output  => $filehandle );

         pod2usage(   -verbose => 2,
                      -noperldoc => 1  );

         pod2usage(   -verbose => 2,
                      -perlcmd => $path_to_perl,
                      -perldoc => $path_to_perldoc,
                      -perldocopt => $perldoc_options );

ARGUMENTS

pod2usage should be given either a single argument, or a list of arguments corresponding to an
associative array (a "hash"). When a single argument is given, it should correspond to exactly one of the
following:

• A string containing the text of a message to print before printing the usage message

• A numeric value corresponding to the desired exit status

• A reference to a hash

If more than one argument is given then the entire argument list is assumed to be a hash. If a hash is
supplied (either as a reference or as a list) it should contain one or more elements with the following
keys:

"-message" string
"-msg" string
The text of a message to print immediately prior to printing the program's usage message.

"-exitval" value
The desired exit status to pass to the exit() function. This should be an integer, or else the
string "NOEXIT" to indicate that control should simply be returned without terminating the invoking
process.

"-verbose" value
The desired level of "verboseness" to use when printing the usage message. If the value is 0, then
only the "SYNOPSIS" section of the pod documentation is printed. If the value is 1, then the
"SYNOPSIS" section, along with any section entitled "OPTIONS", "ARGUMENTS", or "OPTIONS AND
ARGUMENTS" is printed. If the corresponding value is 2 or more then the entire manpage is printed,
using perldoc if available; otherwise Pod::Text is used for the formatting. For better readability,
the all-capital headings are downcased, e.g. "SYNOPSIS" => "Synopsis".

The special verbosity level 99 requires to also specify the -sections parameter; then these sections
are extracted and printed.

"-sections" spec
There are two ways to specify the selection. Either a string (scalar) representing a selection regexp
for sections to be printed when -verbose is set to 99, e.g.

"NAME|SYNOPSIS|DESCRIPTION|VERSION"

With the above regexp all content following (and including) any of the given "=head1" headings will
be shown. It is possible to restrict the output to particular subsections only, e.g.:

"DESCRIPTION/Algorithm"

This will output only the "=head2 Algorithm" heading and content within the "=head1 DESCRIPTION"
section. The regexp binding is stronger than the section separator, such that e.g.:

"DESCRIPTION|OPTIONS|ENVIORNMENT/Caveats"

will print any "=head2 Caveats" section (only) within any of the three "=head1" sections.

Alternatively, an array reference of section specifications can be used:

pod2usage(-verbose => 99, -sections => [
qw(DESCRIPTION DESCRIPTION/Introduction) ] );

This will print only the content of "=head1 DESCRIPTION" and the "=head2 Introduction" sections, but
no other "=head2", and no other "=head1" either.

"-output" handle
A reference to a filehandle, or the pathname of a file to which the usage message should be written.
The default is "\*STDERR" unless the exit value is less than 2 (in which case the default is
"\*STDOUT").

"-input" handle
A reference to a filehandle, or the pathname of a file from which the invoking script's pod
documentation should be read. It defaults to the file indicated by $0 ($PROGRAM_NAME for users of
English.pm).

If you are calling pod2usage() from a module and want to display that module's POD, you can use this:

use Pod::Find qw(pod_where);
pod2usage( -input => pod_where({-inc => 1}, __PACKAGE__) );

"-pathlist" string
A list of directory paths. If the input file does not exist, then it will be searched for in the
given directory list (in the order the directories appear in the list). It defaults to the list of
directories implied by $ENV{PATH}. The list may be specified either by a reference to an array, or by
a string of directory paths which use the same path separator as $ENV{PATH} on your system (e.g., ":"
for Unix, ";" for MSWin32 and DOS).

"-noperldoc"
By default, Pod::Usage will call perldoc when -verbose >= 2 is specified. This does not work well
e.g. if the script was packed with PAR. The -noperldoc option suppresses the external call to perldoc
and uses the simple text formatter (Pod::Text) to output the POD.

"-perlcmd"
By default, Pod::Usage will call perldoc when -verbose >= 2 is specified. In case of special or
unusual Perl installations, the -perlcmd option may be used to supply the path to a perl executable
which should run perldoc.

"-perldoc" path-to-perldoc
By default, Pod::Usage will call perldoc when -verbose >= 2 is specified. In case perldoc is not
installed where the perl interpreter thinks it is (see Config), the -perldoc option may be used to
supply the correct path to perldoc.

"-perldocopt" string
By default, Pod::Usage will call perldoc when -verbose >= 2 is specified. The -perldocopt option may
be used to supply options to perldoc. The string may contain several, space-separated options.

Formatting base class
The default text formatter is Pod::Text. The base class for Pod::Usage can be defined by pre-setting
$Pod::Usage::Formatter before loading Pod::Usage, e.g.:

BEGIN { $Pod::Usage::Formatter = 'Pod::Text::Termcap'; }
use Pod::Usage qw(pod2usage);

Pod::Usage uses Pod::Simple's _handle_element_end() method to implement the section selection, and in
case of verbosity < 2 it down-cases the all-caps headings to first capital letter and rest lowercase, and
adds a colon/newline at the end of the headings, for better readability. Same for verbosity = 99.

Pass-through options
The following options are passed through to the underlying text formatter. See the manual pages of these
modules for more information.

alt code indent loose margin quotes sentence stderr utf8 width

DESCRIPTION

       pod2usage  will  print a usage message for the invoking script (using its embedded pod documentation) and
       then exit the script with the desired exit status. The usage message printed may have any  one  of  three
       levels of "verboseness": If the verbose level is 0, then only a synopsis is printed. If the verbose level
       is  1, then the synopsis is printed along with a description (if present) of the command line options and
       arguments. If the verbose level is 2, then the entire manual page is printed.

       Unless they are explicitly specified, the default values for the exit status, verbose level,  and  output
       stream to use are determined as follows:

       •   If  neither  the  exit  status nor the verbose level is specified, then the default is to use an exit
           status of 2 with a verbose level of 0.

       •   If an exit status is specified but the verbose level is not, then the verbose level will default to 1
           if the exit status is less than 2 and will default to 0 otherwise.

       •   If an exit status is not specified but verbose level is given, then the exit status will default to 2
           if the verbose level is 0 and will default to 1 otherwise.

       •   If the exit status used is less than 2, then output is printed  on  "STDOUT".   Otherwise  output  is
           printed on "STDERR".

       Although  the  above  may  seem  a  bit  confusing  at first, it generally does "the right thing" in most
       situations.  This determination of the default values to use is based upon  the  following  typical  Unix
       conventions:

       •   An exit status of 0 implies "success". For example, diff(1) exits with a status of 0 if the two files
           have the same contents.

       •   An  exit status of 1 implies possibly abnormal, but non-defective, program termination.  For example,
           grep(1) exits with a status of 1 if it did not find a matching line for the given regular expression.

       •   An exit status of 2 or more implies a fatal error. For example, ls(1) exits with a status of 2 if you
           specify an illegal (unknown) option on the command line.

       •   Usage messages issued as a result of bad command-line syntax should go to "STDERR".   However,  usage
           messages issued due to an explicit request to print usage (like specifying -help on the command line)
           should go to "STDOUT", just in case the user wants to pipe the output to a pager (such as more(1)).

       •   If  program  usage  has  been  explicitly requested by the user, it is often desirable to exit with a
           status of 1 (as opposed to 0) after issuing the user-requested usage message.  It is  also  desirable
           to give a more verbose description of program usage in this case.

       pod2usage  doesn't  force  the  above  conventions upon you, but it will use them by default if you don't
       expressly tell it to do otherwise.  The ability of pod2usage() to accept a  single  number  or  a  string
       makes it convenient to use as an innocent looking error message handling function:

           use strict;
           use Pod::Usage;
           use Getopt::Long;

           ## Parse options
           my %opt;
           GetOptions(\%opt, "help|?", "man", "flag1")  ||  pod2usage(2);
           pod2usage(1)  if ($opt{help});
           pod2usage(-exitval => 0, -verbose => 2)  if ($opt{man});

           ## Check for too many filenames
           pod2usage("$0: Too many files given.\n")  if (@ARGV > 1);

       Some  user's  however  may  feel  that the above "economy of expression" is not particularly readable nor
       consistent and may instead choose to do something more like the following:

           use strict;
           use Pod::Usage qw(pod2usage);
           use Getopt::Long qw(GetOptions);

           ## Parse options
           my %opt;
           GetOptions(\%opt, "help|?", "man", "flag1")  ||
             pod2usage(-verbose => 0);

           pod2usage(-verbose => 1)  if ($opt{help});
           pod2usage(-verbose => 2)  if ($opt{man});

           ## Check for too many filenames
           pod2usage(-verbose => 2, -message => "$0: Too many files given.\n")
             if (@ARGV > 1);

       As with all things in Perl, there's more than  one  way  to  do  it,  and  pod2usage()  adheres  to  this
       philosophy.   If you are interested in seeing a number of different ways to invoke pod2usage (although by
       no means exhaustive), please refer to "EXAMPLES".

   Scripts
       The Pod::Usage distribution comes with a script pod2usage which offers a command line  interface  to  the
       functionality of Pod::Usage. See pod2usage.

EXAMPLES

       Each of the following invocations of "pod2usage()" will print just the "SYNOPSIS" section to "STDERR" and
       will exit with a status of 2:

           pod2usage();

           pod2usage(2);

           pod2usage(-verbose => 0);

           pod2usage(-exitval => 2);

           pod2usage({-exitval => 2, -output => \*STDERR});

           pod2usage({-verbose => 0, -output  => \*STDERR});

           pod2usage(-exitval => 2, -verbose => 0);

           pod2usage(-exitval => 2, -verbose => 0, -output => \*STDERR);

       Each of the following invocations of "pod2usage()" will print a message of "Syntax error." (followed by a
       newline)  to "STDERR", immediately followed by just the "SYNOPSIS" section (also printed to "STDERR") and
       will exit with a status of 2:

           pod2usage("Syntax error.");

           pod2usage(-message => "Syntax error.", -verbose => 0);

           pod2usage(-msg  => "Syntax error.", -exitval => 2);

           pod2usage({-msg => "Syntax error.", -exitval => 2, -output => \*STDERR});

           pod2usage({-msg => "Syntax error.", -verbose => 0, -output => \*STDERR});

           pod2usage(-msg  => "Syntax error.", -exitval => 2, -verbose => 0);

           pod2usage(-message => "Syntax error.",
                     -exitval => 2,
                     -verbose => 0,
                     -output  => \*STDERR);

       Each of the following invocations of "pod2usage()" will print the "SYNOPSIS" section  and  any  "OPTIONS"
       and/or "ARGUMENTS" sections to "STDOUT" and will exit with a status of 1:

           pod2usage(1);

           pod2usage(-verbose => 1);

           pod2usage(-exitval => 1);

           pod2usage({-exitval => 1, -output => \*STDOUT});

           pod2usage({-verbose => 1, -output => \*STDOUT});

           pod2usage(-exitval => 1, -verbose => 1);

           pod2usage(-exitval => 1, -verbose => 1, -output => \*STDOUT});

       Each of the following invocations of "pod2usage()" will print the entire manual page to "STDOUT" and will
       exit with a status of 1:

           pod2usage(-verbose  => 2);

           pod2usage({-verbose => 2, -output => \*STDOUT});

           pod2usage(-exitval  => 1, -verbose => 2);

           pod2usage({-exitval => 1, -verbose => 2, -output => \*STDOUT});

   Recommended Use
       Most  scripts  should  print  some  type of usage message to "STDERR" when a command line syntax error is
       detected. They should also provide an option (usually "-H" or "-help") to print a (possibly more verbose)
       usage message to "STDOUT". Some scripts may even wish to go so far as to  provide  a  means  of  printing
       their  complete  documentation  to "STDOUT" (perhaps by allowing a "-man" option). The following complete
       example uses Pod::Usage in combination with Getopt::Long to do all of these things:

           use strict;
           use Getopt::Long qw(GetOptions);
           use Pod::Usage qw(pod2usage);

           my $man = 0;
           my $help = 0;
           ## Parse options and print usage if there is a syntax error,
           ## or if usage was explicitly requested.
           GetOptions('help|?' => \$help, man => \$man) or pod2usage(2);
           pod2usage(1) if $help;
           pod2usage(-verbose => 2) if $man;

           ## If no arguments were given, then allow STDIN to be used only
           ## if it's not connected to a terminal (otherwise print usage)
           pod2usage("$0: No files given.")  if ((@ARGV == 0) && (-t STDIN));

           __END__

           =head1 NAME

           sample - Using GetOpt::Long and Pod::Usage

           =head1 SYNOPSIS

           sample [options] [file ...]

            Options:
              -help            brief help message
              -man             full documentation

           =head1 OPTIONS

           =over 4

           =item B<-help>

           Print a brief help message and exits.

           =item B<-man>

           Prints the manual page and exits.

           =back

           =head1 DESCRIPTION

           B<This program> will read the given input file(s) and do something
           useful with the contents thereof.

           =cut

CAVEATS

       By default, pod2usage() will use $0 as the path to the pod input file.  Unfortunately, not all systems on
       which Perl runs will set $0 properly (although if $0 isn't found, pod2usage() will search  $ENV{PATH}  or
       else the list specified by the "-pathlist" option).  If this is the case for your system, you may need to
       explicitly  specify  the  path  to  the  pod  docs for the invoking script using something similar to the
       following:

           pod2usage(-exitval => 2, -input => "/path/to/your/pod/docs");

       In the pathological case that a script is called via a relative path and the script  itself  changes  the
       current  working  directory (see "chdir" in perlfunc) before calling pod2usage, Pod::Usage will fail even
       on robust platforms. Don't do that. Or use FindBin to locate the script:

           use FindBin;
           pod2usage(-input => $FindBin::Bin . "/" . $FindBin::Script);

AUTHOR

       Please report bugs using <http://rt.cpan.org>.

       Marek Rouchal <marekr@cpan.org>

       Brad Appleton <bradapp@enteract.com>

       Based on code for Pod::Text::pod2text() written by Tom Christiansen <tchrist@mox.perl.com>

ACKNOWLEDGMENTS

       rjbs for refactoring Pod::Usage to not use Pod::Parser any more.

       Steven McDougall <swmcd@world.std.com> for his help and patience with re-writing this manpage.