Provided by: shellia_5.6.1_all 
NAME
shellia - library for interactive shell scripts
# copyright: Bernd Schumacher <bernd.schumacher@hpe.com> (2007-2020) # license: GNU
General Public License, version 3
Author bernd.schumacher@hpe.com
Date 2018-07-26
Copyright
gpl3
Version
0.1
Manual section
3
Manual group
shell library
SYNOPSIS
. /usr/share/shellia/ia[.interactive|.check|.debug|]
eval "$ia_init"
[[ia_nocheck [-f]] | [[ia_stdout|ia_ignore regex] ...]]
ia_add command-sequence
dbg [debug-level [debug-topic ...]] debug-output
ia [-c|-C] [-x]
ENVIRONMENT
If ia_logfile contains the path to a writeable file, logfile output as seen by ia is
appended to that file.
DESCRIPTION
shellia is a library that allows to run shell scripts silently or interactive and helps to
check errors of commands that are combined in steps.
Each function of a shell programm (including the main shell programm) can include a group
of steps. A group of steps should always be enclosed between an initializing line eval
"$ia_init" and the line with command ia which starts the execution of the steps. Each
step is a command-sequence given as string argument to ia_add The command-sequence
contained in the string has the same requirements as if it would be given to the shell
command eval.
OPTIONS
. /usr/share/shellia/ia[.interactive|.check|.debug|]
To only load the shellia interactive library for basic interactive features use .
/usr/share/shellia/ia.interactive. To only load shellia check library to check
stderr, stdout and exit-value of steps use . /usr/share/shellia/ia.check. TO only
load the shellia debug library, to add debug-output to a shell script use .
/usr/share/shellia/ia.debug. To source all shellia libraries listed above is the
suggested method and can be done with . /usr/share/shellia/ia.
ia_nocheck
This command can be used, if the following ia command has enabled check-mode with
option [-c|-C] for its group of steps. This will disable the check of stderr and
stdout in the next single ia_add step. With opiton -f added, it will also disable
checking the exit value of the next single step.
ia_stdout regex
to use this command, the following ia command has to be used with option -c. regex
is a regualar expressions as defined in awk(1), to define which output of the
following step defined with ia_add will be standard output of the step. Each step
can be preceded with any number of ia_stdout regex commands. Because the user can
not suppress output allowed with ia_stodut with the option -s, ia_stdout should
only be used, if the output is intendet to be piped to another programm. regex
only needs to handle text without color-control-codes.
ia_ignore regex
to use this command, the following ia command has to be used with either option -c
or -C. regex is a regualar expressions as defined in awk(1), to define which
output of the following step defined with ia_add will be ignored. Each step can be
preceded with any number of ia_ignore regex commands. regex only needs to handle
text without color-control-codes.
-c if this option is given to ia all steps previous added with ia_add will be checked
with check-mode option -c (see check-mode below)
-C if this option is given to ia all steps previous added with ia_add will be checked
with check-mode option -C. (see check-mode below)
-x if this option is given to ia all steps previous added with ia_add will use
trace-mode. (see trace-mode below)
USAGE
The examples listed below try to show the technical features of shellia in very small
examples.
Be aware that the step size in the example listed below is only reasonable to demonstrate
shellia features. Please read shellia(7) NOTES, to learn about a reasonable size of
interactive steps.
Basic features
A script using the basic features to print hello world may look like:
01 #!/bin/sh
02 . /usr/share/shellia/ia.interactive
03 eval "$ia_init"
04 ia_add "echo \"hello\""
05 ia_add "echo \"world\""
06 ia
In line 02 the shellia library ia.interactive is loaded. Line 03 initializes shellia and
is needed before shellia functions can be used. It also consumes all shellia standard
options, so that the remaining options will be script-specific-options. Line 04 and 05
are using ia_add to add the echo commands. The execution starts in line 06 with the ia
command.
If the script is called without options, it only prints hello and world. If it is called
with option -i it will run in interactive mode, as discussed in shellia(1) Basic features.
On debian systems this script may be found at /usr/share/doc/shellia/examples/hello_world.
Interactive-mode
A script using a function in interactive-mode may look like:
01 . /usr/share/shellia/ia.interactive
02 say_hello()
03 {
04 local name
05 eval "$ia_init"
06 ia_add "name=\"$1\""
07 ia_add "echo \"hello \$name\""
08 ia
09 }
10 eval "$ia_init"
11 ia_add "say_hello <-i> -- \"$1\""
12 ia
Line 01, 10, 12 are equivalent as in the previous example. Line 02, 03, 04, 07 and 09 are
normal shell statements, with no additional comments. Line 05 to initialize shellia has
to be done in each function. Line 06 sets variable name to $1. Line 08 starts the steps
and is needed in all functions. Line 11 uses the special syntax <-i> which allows to
switch -i in interactive-mode.
On debian systems this script may be found at
/usr/share/doc/shellia/examples/hello_world_fun.
See shellia(1) Interactive-mode to read about using this script.
check-mode
Before demonstrating how to use the check-mode option -c or -C we first start with the
following script, without any check-mode option:
01 . /usr/share/shellia/ia
02 say_hello()
03 {
04 echo "hello $1"
05 echo "end of function say_hello" >&2
06 return 5
07 }
08 eval "$ia_init"
09 ia_add "say_hello \"$1\""
10 ia
If we run this script we get the following output and exit value:
01 $ ./hello_world_check "shellia user"
02 hello shellia user
03 end of function say_hello
04 $ echo $?
05 5
In the script lines 02 to 07 the function say_hello is defined. To call this function
shellia specific syntax is used in script line 08 to 10. Let's assume the function
say_hello may represent an external programm, that we have to use, but are not allowed to
change it. But we want to change the output presented to the user:
• the output "end of function say_hello" makes no sense for the user. We know it is
harmless, and we just want to suppress it.
• output starting with "hello" is what we want. But any other output, that we may not
have seen until now, should be displayed as error.
• We want to see every nonzero exit value as an error. Only an exit value of 5 seems
to be ok and should not be displayed as error.
We can get this with check-mode option -c or -C. There is a disccussion about which
option to use in shellia(7) When to use check option -c and -C.
check-mode -c
To get the wanted behaviour described in previous chapter with check-mode option -c we
change script line 10 to:
10 ia -c
and get the following output:
01 $ ./hello_world_check "shellia user"
02 --- output with ERROR from <hello_world_check> running <say_hello "shellia user"> ---
03 e:hello
04 e:end of function say_hello
05 e:exit=5
06 --- (q)uit (r)edo (i)gnore (s)witch interactive ---
07 ?
Output line 01 shows where errors happended. The output lines 03 to 05 start with e: to
classify the output as errors. Line 03 is also shown as error, because shellia does not
know, that it is the wanted output. Line 04 is what we want to be suppressed. And line 05
now shows every nonzero exit as an error. To make the program to behave as wanted we can
add the folloging lines +a, +b and +c before script line 09:
+a ia_stdout "^hello "
+b ia_ignore "end of function say_hello$"
+c ia_ignore "^exit=5$"
09 ia_add "say_hello \"$1\""
Line +a will display the output we want to see, and line +b and +c will ignore and
suppresses what we do not want to see.
check-mode -C
A file that starts to fix say_hello with check-mode option -C is provided as example and
the usage is explaind in shellia(1). On debian systems this script may be found at
/usr/share/doc/shellia/examples/hello_world_error. The changed script line from the
example in chapter check-mode is:
10 ia -C
and gives the following output:
01 $ ./hello_world_error "shellia user"
02 --- output with ERROR from <hello_world_error> running <say_hello "shellia user"> ---
03 e:end of function say_hello
04 e:exit=5
05 s:hello
--- (q)uit (r)edo (i)gnore (s)witch interactive ---
?
In line 05 s: already classifies the ouput as stdout. To make the program behave as
wanted we can add the folloging lines +a and +b before script line 09:
+a ia_ignore "end of function say_hello$"
+b ia_ignore "^exit=5$"
09 ia_add "say_hello \"$1\""
debug-mode
The library ia.debug includes functions to add debug-output to a shell script. The
script.using.shellia can then be called with a debug-runtime-config to define the
debug-level and to select debug-topics. See shellia(1) debug-mode to learn about
debug-runtime-config.
A simple script to add debug-output without debug-level or debug-topics is:
01 . /usr/share/shellia/ia
02 say_hello_world()
03 {
04 dbg "say_hello function start"
05 echo "hello world"
06 dbg "say_hello function end"
07 }
08 eval "$ia_init"
09 ia_add "dbg \"main program\""
10 ia_add say_hello_world
11 ia
Line 01, 08, 10 and 11 are already explained in a previous example. Line 04, 06 and 09
adds debug-output. Because no debug-level is defined the lowest possible value 1 is used.
In this script debug-output can be turned on when the script is started with a runtime
debug-level greater or equal to 1.
If you want to use debug-level 3 in the function, you can change the following lines:
04 dbg 3 "say_hello function start"
06 dbg 3 "say_hello function end"
Now a debug-runtime-level of at least 3 is needed to produce output for the changed lines.
Sometimes it is not enough to have debug-levels and you need debug-topics to define which
debug-output has to be shown. You can give a free defined debug-topic to each
debug-statement line. Normally you should only use a limited number of debug-topics to
make things not to complicated.
We change 2 lines to the free invented debug-topics called start and end:
04 dbg 3 start "say_hello function start"
06 dbg 3 end "say_hello function end"
The script now should look like the hello_world_debug script, that on debian systems may
be found at /usr/share/doc/shellia/examples/hello_world_debug.
See shellia(1) debug-mode to read about using this script.
log-mode
The library ia.log includes functions to add logging to a shell script.
In the logfile each line starts with a number of bars. Following lines with the same
number of bars, result from the same function, which is used as header.
A simple script with logging called hello_world_log is provided as example. On debian
systems it may be found at /usr/share/doc/shellia/examples/hello_world_log. A part of
this script is:
01 ia_logfile="$(mktemp)"
02 export ia_logfile
03 . /usr/share/shellia/ia
04 say_hello()
05 {
06 local name
07 eval "$ia_init"
08 ia_add "dbg \"funtion say_hello called with $# arguments\""
09 ia_add "name=\"$1\""
10 ia_stdout "^hello"
11 ia_add "echo \"hello \$name\""
12 ia -c
13 }
14 eval "$ia_init"
15 ia_add "dbg \"main program begin\""
16 ia_nocheck # do not check the already checked output of next line
17 ia_add "say_hello <-i> -- \"$1\""
18 ia -c
In line 03 the ia library is loaded, which also loads ia.log. The logging is simply
enabled by setting variable ia_logfile in line 01 with the path to the logfile and
exporting it in line 02. The new logfile output will be appended to the logfile.
To see 2 levels of logging in the logfile we have a main program and a function in the
example. Both use check-mode with ia -c in line 07 and 14 which allows to log checked
output. To not double check the function say_hello in the main program line 16 ia_nocheck
is added to not check the output of line 17.
The output to the logfile is discussed in shellia(1).
trace-mode
Trace-mode can be enabled with ia -x for a group of steps. When tracemode is enabled,
before each step set -x is called and after each stet set +x is called. This way, no
shellia internal commands are traced.
A simple script with trace-mode called hello_world_trace is provided as example. On
debian systems it may be found at /usr/share/doc/shellia/examples/hello_world_trace. A
part of this script is:
01 . /usr/share/shellia/ia
02 write_file() {
03 eval "$ia_init"
04 ia_add "echo \"hello $2\" >$1"
05 ia -c -x
06 }
07 show_file() {
08 eval "$ia_init"
09 ia_stdout "^hello"
10 ia_add "cat $1"
11 ia -c -x
12 }
13 eval "$ia_init"
14 ia_add "file=\"\$(mktemp)\""
15 ia_add "write_file <-i> -- \"\$file\" \"$1\""
16 ia_stdout "."
17 ia_add "show_file <-i> -- \"\$file\""
18 ia_add "rm -f \"\$file\""
19 ia -c -x
Without trace-mode (without -x in line 05 11 and 19) this script would just print one line
starting with hello. The following output is printed when calling
$ /usr/share/doc/shellia/examples/hello_world_trace "shellia user"
+ mktemp
+ file=/tmp/tmp.zCDaHg9dFP
+ echo hello shellia user
+ write_file -- /tmp/tmp.zCDaHg9dFP shellia user
+ cat /tmp/tmp.zCDaHg9dFP
+ show_file -- /tmp/tmp.zCDaHg9dFP
hello shellia user
+ rm -f /tmp/tmp.zCDaHg9dFP
Because log-mode is enabled the following log is written:
|hello_world_trace
|+ mktemp
|+ file=/tmp/tmp.zCDaHg9dFP
||hello_world_trace/write_file
||+ echo hello shellia user
|+ write_file -- /tmp/tmp.zCDaHg9dFP shellia user
||hello_world_trace/show_file
||+ cat /tmp/tmp.zCDaHg9dFP
||s:hello shellia user
|+ show_file -- /tmp/tmp.zCDaHg9dFP
|s:hello shellia user
|+ rm -f /tmp/tmp.zCDaHg9dFP
The log shows, that trace-mode output is included in the log-mode output hierarchie. To
get trace-mode output in a logfile, it is important that log-mode and also check-mode is
enabled.
Also if no-check is used for a step, this step will not create trace-mode output in the
logfile.
variable in Interactive-mode
If you want to enable the user to see the value of a variable, before it is used, with key
press v, you can write $<var> instead of $var or ${var}.
PREFIX
Commands or global variables brought by shellia normally start with ia (see NAME in
shellia(7)). If ia.debug is used there will also be commands and global variables that
start with dbg. But if you already use one or both of this prefixes, you can change them,
while loading the library.
The example changes ia to mycmd and dbg to myprnt:
ia_prefix=mycmd
dbg_prefix=myprnt
. /usr/share/shellia/ia
Now the new prefixes have to be used, e.g. ia_add is now mycmd_add.
SEE ALSO
shellia(1), shellia(7), awk(1)
SHELLIA()