NAME

       zmq_poller - input/output multiplexing

SYNOPSIS

       void *zmq_poller_new (void); int zmq_poller_destroy (void *poller_p);*

       int zmq_poller_add (void *poller, void *socket, void *user_data, short events); *int
       zmq_poller_modify (void *poller, void *socket, short events); int zmq_poller_remove (void
       *poller, void *socket);

       int zmq_poller_add_fd (void *poller, int fd, void *user_data, short events); int
       zmq_poller_modify_fd (void *poller, int fd, short events); int zmq_poller_remove_fd (void
       *poller, int fd);

       int zmq_poller_wait (void *poller, zmq_poller_event_t *event, long timeout); int
       zmq_poller_wait_all (void *poller, zmq_poller_event_t *events, int n_events, long
       timeout);

       int zmq_poller_fd (void *poller, zmq_fd_t *fd);

DESCRIPTION

       The zmq_poller*_ functions provide a mechanism for applications to multiplex input/output
       events in a level-triggered fashion over a set of sockets.

       zmq_poller_new and zmq_poller_destroy manage the lifetime of a poller instance.
       zmq_poller_new creates and returns a new poller instance, while zmq_poller_destroy
       destroys it. A pointer to a valid poller must be passed as the poller_p argument of
       zmq_poller_destroy. In particular, zmq_poller_destroy may not be called multiple times for
       the same poller instance. zmq_poller_destroy sets the passed pointer to NULL in case of a
       successful execution. zmq_poller_destroy implicitly unregisters all registered sockets and
       file descriptors.

       zmq_poller_add, zmq_poller_modify and zmq_poller_remove manage the 0MQ sockets registered
       with a poller.

       zmq_poller_add registers a new socket with a given poller. Both poller and socket must
       point to valid 0MQ objects. The events parameter specifies which event types the client
       wants to subscribe to. It is legal to specify no events (i.e. 0), and activate them later
       with zmq_poller_modify. In addition, user_data may be specified, which is not used by the
       poller, but passed back to the caller when an event was signalled in a call to
       zmq_poller_wait or zmq_poller_wait_all. user_data may be NULL. If it is not NULL, it must
       be a valid pointer. Otherwise, behaviour is undefined. zmq_poller_add may not be called
       multiple times for the same socket (unless zmq_poller_remove has been called for that
       socket).

       zmq_poller_modify modifies the subscribed events for a socket. It is legal to specify no
       events (i.e. 0) to disable events temporarily, and reactivate them later with another call
       to zmq_poller_modify.

       zmq_poller_remove removes a socket registration completely. zmq_poller_remove must be
       called before a socket is closed with zmq_close.

       Note that it is not necessary to call zmq_poller_remove for any socket before calling
       zmq_poller_destroy.

       Also note that calling zmq_poller_remove is not equivalent to calling zmq_poller_modify
       with no events. zmq_poller_modify does not free resources associated with the socket
       registration, and requires that the socket remains valid.

       zmq_poller_add_fd, zmq_poller_modify_fd and zmq_poller_remove_fd are analogous to the
       previous functions but manage regular file descriptiors registered with a poller. On
       Windows, these functions can only be used with WinSock sockets.

       In the following, 0MQ sockets added with zmq_poller_add and file descriptors added with
       zmq_poller_add_fd are referred to as registered objects.

       The zmq_poller_event_t structure is defined as follows:

           typedef struct
           {
               void *socket;
           #if defined _WIN32
               SOCKET fd;
           #else
               int fd;
           #endif
               void *user_data;
               short events;
           } zmq_poller_event_t;

       For each registered object, zmq_poller_wait_all() shall examine the registered objects for
       the event(s) currently registered.

       If none of the registered events have occurred, zmq_poller_wait_all shall wait timeout
       milliseconds for an event to occur on any of the registered objects. If the value of
       timeout is 0, zmq_poller_wait_all shall return immediately. If the value of timeout is -1,
       zmq_poller_wait_all shall block indefinitely until one event has occurred on any of the
       registered objects.

       The events argument zmq_poller_wait_all must be a pointer to an array of at least n_events
       elements. Behaviour is undefined if events does not point to an array of at least n_events
       elements.

       zmq_poller_wait_all returns at most n_events events. If more than n_events events were
       signalled, only an unspecified subset of the signalled events is returned through events.

       A caller is advised to ensure that n_events is equal to the number of registered objects.
       Otherwise, a livelock situation may result: If more than n_events registered objects have
       an active event on each call to zmq_poller_wait_all, it might happen that the same subset
       of registered objects is always returned, and the caller never notices the events on the
       others.

       zmq_poller_wait_all returns the number of valid elements. The valid elements are placed in
       positions 0 to n_events - 1 in the events array. All members of a valid element are set to
       valid values by zmq_poller_wait_all. The client does therefore not need to initialize the
       contents of the events array before a call to zmq_poller_wait_all. It is unspecified
       whether the the remaining elements of events are written to by zmq_poller_wait_all.

       zmq_poller_fd queries the file descriptor associated with the zmq_poller, and stores it in
       the address pointer to by fd. The zmq_poller is only guaranteed to have a file descriptor
       if at least one thread-safe socket is currently registered.

EVENT TYPES

       The events parameter of zmq_poller_add and zmq_poller_modify, and the events member of the
       zmq_poller_event_t structure are bit masks constructed by OR’ing a combination of the
       following event flags:

       ZMQ_POLLIN
           For 0MQ sockets, at least one message may be received from the socket without
           blocking. For standard sockets this is equivalent to the POLLIN flag of the poll()
           system call and generally means that at least one byte of data may be read from fd
           without blocking.

       ZMQ_POLLOUT
           For 0MQ sockets, at least one message may be sent to the socket without blocking. For
           standard sockets this is equivalent to the POLLOUT flag of the poll() system call and
           generally means that at least one byte of data may be written to fd without blocking.

       ZMQ_POLLERR
           For 0MQ sockets this flag has no effect on the zmq_poller_add and zmq_poller_modify
           functions, and is never set in the events member of the zmq_poller_event_t structure.
           For standard sockets, this flag is passed through zmq_poller_wait_all to the
           underlying poll() system call and generally means that some sort of error condition is
           present on the socket specified by fd.

       ZMQ_POLLPRI
           For 0MQ sockets this flag has no effect on the zmq_poller_add and zmq_poller_modify
           functions, and is never set in the events member of the zmq_poller_event_t structure.
           For standard sockets this means there is urgent data to read. Refer to the POLLPRI
           flag for more informations. For a file descriptor, refer to your OS documentation: as
           an example, GPIO interrupts are signaled through a POLLPRI event. This flag has no
           effect on Windows.

           Note
           The zmq_poller*_ functions may be implemented or emulated using operating system
           interfaces other than poll(), and as such may be subject to the limits of those
           interfaces in ways not defined in this documentation.

THREAD SAFETY

       Like most other 0MQ objects, a poller is not thread-safe. All operations must be called
       from the same thread. Otherwise, behaviour is undefined.

RETURN VALUE

       zmq_poller_new returns a valid pointer to a poller, or NULL in case of a failure.

       All functions that return an int, return -1 in case of a failure. In that case,
       zmq_errno() can be used to query the type of the error as described below.

       zmq_poller_wait_all returns the number of events signalled and returned in the events
       array. It never returns 0.

       All other functions return 0 in case of a successful execution.

ERRORS

       On zmq_poller_new: ENOMEM:: A new poller could not be allocated successfully.

       On zmq_poller_destroy: EFAULT:: poller_p did not point to a valid poller. Note that
       passing an invalid pointer (e.g. pointer to deallocated memory) may cause undefined
       behaviour (e.g. an access violation).

       On zmq_poller_add, zmq_poller_modify and zmq_poller_remove: EFAULT:: poller did not point
       to a valid poller. Note that passing an invalid pointer (e.g. pointer to deallocated
       memory) may cause undefined behaviour (e.g. an access violation). ENOTSOCK:: socket did
       not point to a valid socket. Note that passing an invalid pointer (e.g. pointer to
       deallocated memory) may cause undefined behaviour (e.g. an access violation).

       On zmq_poller_add: EMFILE:: TODO

       On zmq_poller_add or zmq_poller_add_fd: ENOMEM:: Necessary resources could not be
       allocated. EINVAL:: socket resp. fd was already registered with the poller.

       On zmq_poller_modify, zmq_poller_modify_fd, zmq_poller_remove or zmq_poller_remove_fd:
       EINVAL:: socket resp. fd was not registered with the poller.

       On zmq_poller_add_fd, zmq_poller_modify_fd and zmq_poller_remove_fd: EBADF*: The fd
       specified was the retired fd.

       On zmq_poller_wait and zmq_poller_wait_all: ENOMEM:: Necessary resources could not be
       allocated. ETERM:: At least one of the registered objects is a socket whose associated 0MQ
       context was terminated. EFAULT:: The provided events was NULL, or poller did not point to
       a valid poller, or there are no registered objects and timeout was negative. EINTR:: The
       operation was interrupted by delivery of a signal before any events were available.
       EAGAIN:: No registered event was signalled before the timeout was reached.

       On _zmq_poller_fd: EINVAL:: The poller has no associated file descriptor. EFAULT:: The
       provided poller did not point to a valid poller.

EXAMPLE

       Polling indefinitely for input events on both a 0MQ socket and a standard socket..

           void *poller = zmq_poller_new ();

           zmq_poller_event_t events [2];
           /* First item refers to 0MQ socket 'socket' */
           zmq_poller_add (poller, socket, ZMQ_POLLIN, NULL);
           /* Second item refers to standard socket 'fd' */
           zmq_poller_add_fd (poller, fd, ZMQ_POLLIN, NULL);
           /* Poll for events indefinitely */
           int rc = zmq_poller_wait_all (items, events, 2, -1);
           assert (rc >= 0);
           /* Returned events will be stored in 'events' */
           zmq_poller_destroy (&poller);

SEE ALSO

       zmq_socket(3) zmq_send(3) zmq_recv(3) zmq(7)

AUTHORS

       This page was written by the 0MQ community. To make a change please read the 0MQ
       Contribution Policy at http://www.zeromq.org/docs:contributing.