Provided by: openssh-server_8.2p1-4ubuntu0.11_amd64 bug

NAME

     sshd_config — OpenSSH daemon configuration file

DESCRIPTION

     sshd(8) reads configuration data from /etc/ssh/sshd_config (or the file specified with -f on
     the command line).  The file contains keyword-argument pairs, one per line.  For each
     keyword, the first obtained value will be used.  Lines starting with ‘#’ and empty lines are
     interpreted as comments.  Arguments may optionally be enclosed in double quotes (") in order
     to represent arguments containing spaces.

     Note that the Debian openssh-server package sets several options as standard in
     /etc/ssh/sshd_config which are not the default in sshd(8):

              Include /etc/ssh/sshd_config.d/*.conf
              ChallengeResponseAuthentication no
              X11Forwarding yes
              PrintMotd no
              AcceptEnv LANG LC_*
              Subsystem sftp /usr/lib/openssh/sftp-server
              UsePAM yes

     /etc/ssh/sshd_config.d/*.conf files are included at the start of the configuration file, so
     options set there will override those in /etc/ssh/sshd_config.

     The possible keywords and their meanings are as follows (note that keywords are case-
     insensitive and arguments are case-sensitive):

     AcceptEnv
             Specifies what environment variables sent by the client will be copied into the
             session's environ(7).  See SendEnv and SetEnv in ssh_config(5) for how to configure
             the client.  The TERM environment variable is always accepted whenever the client
             requests a pseudo-terminal as it is required by the protocol.  Variables are
             specified by name, which may contain the wildcard characters ‘*’ and ‘?’.  Multiple
             environment variables may be separated by whitespace or spread across multiple
             AcceptEnv directives.  Be warned that some environment variables could be used to
             bypass restricted user environments.  For this reason, care should be taken in the
             use of this directive.  The default is not to accept any environment variables.

     AddressFamily
             Specifies which address family should be used by sshd(8).  Valid arguments are any
             (the default), inet (use IPv4 only), or inet6 (use IPv6 only).

     AllowAgentForwarding
             Specifies whether ssh-agent(1) forwarding is permitted.  The default is yes.  Note
             that disabling agent forwarding does not improve security unless users are also
             denied shell access, as they can always install their own forwarders.

     AllowGroups
             This keyword can be followed by a list of group name patterns, separated by spaces.
             If specified, login is allowed only for users whose primary group or supplementary
             group list matches one of the patterns.  Only group names are valid; a numerical
             group ID is not recognized.  By default, login is allowed for all groups.  The
             allow/deny groups directives are processed in the following order: DenyGroups,
             AllowGroups.

             See PATTERNS in ssh_config(5) for more information on patterns.

     AllowStreamLocalForwarding
             Specifies whether StreamLocal (Unix-domain socket) forwarding is permitted.  The
             available options are yes (the default) or all to allow StreamLocal forwarding, no
             to prevent all StreamLocal forwarding, local to allow local (from the perspective of
             ssh(1)) forwarding only or remote to allow remote forwarding only.  Note that
             disabling StreamLocal forwarding does not improve security unless users are also
             denied shell access, as they can always install their own forwarders.

     AllowTcpForwarding
             Specifies whether TCP forwarding is permitted.  The available options are yes (the
             default) or all to allow TCP forwarding, no to prevent all TCP forwarding, local to
             allow local (from the perspective of ssh(1)) forwarding only or remote to allow
             remote forwarding only.  Note that disabling TCP forwarding does not improve
             security unless users are also denied shell access, as they can always install their
             own forwarders.

     AllowUsers
             This keyword can be followed by a list of user name patterns, separated by spaces.
             If specified, login is allowed only for user names that match one of the patterns.
             Only user names are valid; a numerical user ID is not recognized.  By default, login
             is allowed for all users.  If the pattern takes the form USER@HOST then USER and
             HOST are separately checked, restricting logins to particular users from particular
             hosts.  HOST criteria may additionally contain addresses to match in CIDR
             address/masklen format.  The allow/deny users directives are processed in the
             following order: DenyUsers, AllowUsers.

             See PATTERNS in ssh_config(5) for more information on patterns.

     AuthenticationMethods
             Specifies the authentication methods that must be successfully completed for a user
             to be granted access.  This option must be followed by one or more lists of comma-
             separated authentication method names, or by the single string any to indicate the
             default behaviour of accepting any single authentication method.  If the default is
             overridden, then successful authentication requires completion of every method in at
             least one of these lists.

             For example, "publickey,password publickey,keyboard-interactive" would require the
             user to complete public key authentication, followed by either password or keyboard
             interactive authentication.  Only methods that are next in one or more lists are
             offered at each stage, so for this example it would not be possible to attempt
             password or keyboard-interactive authentication before public key.

             For keyboard interactive authentication it is also possible to restrict
             authentication to a specific device by appending a colon followed by the device
             identifier bsdauth or pam.  depending on the server configuration.  For example,
             "keyboard-interactive:bsdauth" would restrict keyboard interactive authentication to
             the bsdauth device.

             If the publickey method is listed more than once, sshd(8) verifies that keys that
             have been used successfully are not reused for subsequent authentications.  For
             example, "publickey,publickey" requires successful authentication using two
             different public keys.

             Note that each authentication method listed should also be explicitly enabled in the
             configuration.

             The available authentication methods are: "gssapi-with-mic", "hostbased",
             "keyboard-interactive", "none" (used for access to password-less accounts when
             PermitEmptyPasswords is enabled), "password" and "publickey".

     AuthorizedKeysCommand
             Specifies a program to be used to look up the user's public keys.  The program must
             be owned by root, not writable by group or others and specified by an absolute path.
             Arguments to AuthorizedKeysCommand accept the tokens described in the TOKENS
             section.  If no arguments are specified then the username of the target user is
             used.

             The program should produce on standard output zero or more lines of authorized_keys
             output (see AUTHORIZED_KEYS in sshd(8)).  If a key supplied by AuthorizedKeysCommand
             does not successfully authenticate and authorize the user then public key
             authentication continues using the usual AuthorizedKeysFile files.  By default, no
             AuthorizedKeysCommand is run.

     AuthorizedKeysCommandUser
             Specifies the user under whose account the AuthorizedKeysCommand is run.  It is
             recommended to use a dedicated user that has no other role on the host than running
             authorized keys commands.  If AuthorizedKeysCommand is specified but
             AuthorizedKeysCommandUser is not, then sshd(8) will refuse to start.

     AuthorizedKeysFile
             Specifies the file that contains the public keys used for user authentication.  The
             format is described in the AUTHORIZED_KEYS FILE FORMAT section of sshd(8).
             Arguments to AuthorizedKeysFile accept the tokens described in the TOKENS section.
             After expansion, AuthorizedKeysFile is taken to be an absolute path or one relative
             to the user's home directory.  Multiple files may be listed, separated by
             whitespace.  Alternately this option may be set to none to skip checking for user
             keys in files.  The default is ".ssh/authorized_keys .ssh/authorized_keys2".

     AuthorizedPrincipalsCommand
             Specifies a program to be used to generate the list of allowed certificate
             principals as per AuthorizedPrincipalsFile.  The program must be owned by root, not
             writable by group or others and specified by an absolute path.  Arguments to
             AuthorizedPrincipalsCommand accept the tokens described in the TOKENS section.  If
             no arguments are specified then the username of the target user is used.

             The program should produce on standard output zero or more lines of
             AuthorizedPrincipalsFile output.  If either AuthorizedPrincipalsCommand or
             AuthorizedPrincipalsFile is specified, then certificates offered by the client for
             authentication must contain a principal that is listed.  By default, no
             AuthorizedPrincipalsCommand is run.

     AuthorizedPrincipalsCommandUser
             Specifies the user under whose account the AuthorizedPrincipalsCommand is run.  It
             is recommended to use a dedicated user that has no other role on the host than
             running authorized principals commands.  If AuthorizedPrincipalsCommand is specified
             but AuthorizedPrincipalsCommandUser is not, then sshd(8) will refuse to start.

     AuthorizedPrincipalsFile
             Specifies a file that lists principal names that are accepted for certificate
             authentication.  When using certificates signed by a key listed in
             TrustedUserCAKeys, this file lists names, one of which must appear in the
             certificate for it to be accepted for authentication.  Names are listed one per line
             preceded by key options (as described in AUTHORIZED_KEYS FILE FORMAT in sshd(8)).
             Empty lines and comments starting with ‘#’ are ignored.

             Arguments to AuthorizedPrincipalsFile accept the tokens described in the TOKENS
             section.  After expansion, AuthorizedPrincipalsFile is taken to be an absolute path
             or one relative to the user's home directory.  The default is none, i.e. not to use
             a principals file – in this case, the username of the user must appear in a
             certificate's principals list for it to be accepted.

             Note that AuthorizedPrincipalsFile is only used when authentication proceeds using a
             CA listed in TrustedUserCAKeys and is not consulted for certification authorities
             trusted via ~/.ssh/authorized_keys, though the principals= key option offers a
             similar facility (see sshd(8) for details).

     Banner  The contents of the specified file are sent to the remote user before authentication
             is allowed.  If the argument is none then no banner is displayed.  By default, no
             banner is displayed.

     CASignatureAlgorithms
             Specifies which algorithms are allowed for signing of certificates by certificate
             authorities (CAs).  The default is:

                   ssh-ed25519,ecdsa-sha2-nistp256,
                   ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                   sk-ssh-ed25519@openssh.com,
                   sk-ecdsa-sha2-nistp256@openssh.com,
                   rsa-sha2-512,rsa-sha2-256

             Certificates signed using other algorithms will not be accepted for public key or
             host-based authentication.

     ChallengeResponseAuthentication
             Specifies whether challenge-response authentication is allowed (e.g. via PAM).  The
             default is yes.

     ChrootDirectory
             Specifies the pathname of a directory to chroot(2) to after authentication.  At
             session startup sshd(8) checks that all components of the pathname are root-owned
             directories which are not writable by any other user or group.  After the chroot,
             sshd(8) changes the working directory to the user's home directory.  Arguments to
             ChrootDirectory accept the tokens described in the TOKENS section.

             The ChrootDirectory must contain the necessary files and directories to support the
             user's session.  For an interactive session this requires at least a shell,
             typically sh(1), and basic /dev nodes such as null(4), zero(4), stdin(4), stdout(4),
             stderr(4), and tty(4) devices.  For file transfer sessions using SFTP no additional
             configuration of the environment is necessary if the in-process sftp-server is used,
             though sessions which use logging may require /dev/log inside the chroot directory
             on some operating systems (see sftp-server(8) for details).

             For safety, it is very important that the directory hierarchy be prevented from
             modification by other processes on the system (especially those outside the jail).
             Misconfiguration can lead to unsafe environments which sshd(8) cannot detect.

             The default is none, indicating not to chroot(2).

     Ciphers
             Specifies the ciphers allowed.  Multiple ciphers must be comma-separated.  If the
             specified list begins with a ‘+’ character, then the specified ciphers will be
             appended to the default set instead of replacing them.  If the specified list begins
             with a ‘-’ character, then the specified ciphers (including wildcards) will be
             removed from the default set instead of replacing them.  If the specified list
             begins with a ‘^’ character, then the specified ciphers will be placed at the head
             of the default set.

             The supported ciphers are:

                   3des-cbc
                   aes128-cbc
                   aes192-cbc
                   aes256-cbc
                   aes128-ctr
                   aes192-ctr
                   aes256-ctr
                   aes128-gcm@openssh.com
                   aes256-gcm@openssh.com
                   chacha20-poly1305@openssh.com

             The default is:

                   chacha20-poly1305@openssh.com,
                   aes128-ctr,aes192-ctr,aes256-ctr,
                   aes128-gcm@openssh.com,aes256-gcm@openssh.com

             The list of available ciphers may also be obtained using "ssh -Q cipher".

     ClientAliveCountMax
             Sets the number of client alive messages which may be sent without sshd(8) receiving
             any messages back from the client.  If this threshold is reached while client alive
             messages are being sent, sshd will disconnect the client, terminating the session.
             It is important to note that the use of client alive messages is very different from
             TCPKeepAlive.  The client alive messages are sent through the encrypted channel and
             therefore will not be spoofable.  The TCP keepalive option enabled by TCPKeepAlive
             is spoofable.  The client alive mechanism is valuable when the client or server
             depend on knowing when a connection has become unresponsive.

             The default value is 3.  If ClientAliveInterval is set to 15, and
             ClientAliveCountMax is left at the default, unresponsive SSH clients will be
             disconnected after approximately 45 seconds.  Setting a zero ClientAliveCountMax
             disables connection termination.

     ClientAliveInterval
             Sets a timeout interval in seconds after which if no data has been received from the
             client, sshd(8) will send a message through the encrypted channel to request a
             response from the client.  The default is 0, indicating that these messages will not
             be sent to the client.

     Compression
             Specifies whether compression is enabled after the user has authenticated
             successfully.  The argument must be yes, delayed (a legacy synonym for yes) or no.
             The default is yes.

     DebianBanner
             Specifies whether the distribution-specified extra version suffix is included during
             initial protocol handshake.  The default is yes.

     DenyGroups
             This keyword can be followed by a list of group name patterns, separated by spaces.
             Login is disallowed for users whose primary group or supplementary group list
             matches one of the patterns.  Only group names are valid; a numerical group ID is
             not recognized.  By default, login is allowed for all groups.  The allow/deny groups
             directives are processed in the following order: DenyGroups, AllowGroups.

             See PATTERNS in ssh_config(5) for more information on patterns.

     DenyUsers
             This keyword can be followed by a list of user name patterns, separated by spaces.
             Login is disallowed for user names that match one of the patterns.  Only user names
             are valid; a numerical user ID is not recognized.  By default, login is allowed for
             all users.  If the pattern takes the form USER@HOST then USER and HOST are
             separately checked, restricting logins to particular users from particular hosts.
             HOST criteria may additionally contain addresses to match in CIDR address/masklen
             format.  The allow/deny users directives are processed in the following order:
             DenyUsers, AllowUsers.

             See PATTERNS in ssh_config(5) for more information on patterns.

     DisableForwarding
             Disables all forwarding features, including X11, ssh-agent(1), TCP and StreamLocal.
             This option overrides all other forwarding-related options and may simplify
             restricted configurations.

     ExposeAuthInfo
             Writes a temporary file containing a list of authentication methods and public
             credentials (e.g. keys) used to authenticate the user.  The location of the file is
             exposed to the user session through the SSH_USER_AUTH environment variable.  The
             default is no.

     FingerprintHash
             Specifies the hash algorithm used when logging key fingerprints.  Valid options are:
             md5 and sha256.  The default is sha256.

     ForceCommand
             Forces the execution of the command specified by ForceCommand, ignoring any command
             supplied by the client and ~/.ssh/rc if present.  The command is invoked by using
             the user's login shell with the -c option.  This applies to shell, command, or
             subsystem execution.  It is most useful inside a Match block.  The command
             originally supplied by the client is available in the SSH_ORIGINAL_COMMAND
             environment variable.  Specifying a command of internal-sftp will force the use of
             an in-process SFTP server that requires no support files when used with
             ChrootDirectory.  The default is none.

     GatewayPorts
             Specifies whether remote hosts are allowed to connect to ports forwarded for the
             client.  By default, sshd(8) binds remote port forwardings to the loopback address.
             This prevents other remote hosts from connecting to forwarded ports.  GatewayPorts
             can be used to specify that sshd should allow remote port forwardings to bind to
             non-loopback addresses, thus allowing other hosts to connect.  The argument may be
             no to force remote port forwardings to be available to the local host only, yes to
             force remote port forwardings to bind to the wildcard address, or clientspecified to
             allow the client to select the address to which the forwarding is bound.  The
             default is no.

     GSSAPIAuthentication
             Specifies whether user authentication based on GSSAPI is allowed.  The default is
             no.

     GSSAPICleanupCredentials
             Specifies whether to automatically destroy the user's credentials cache on logout.
             The default is yes.

     GSSAPIKeyExchange
             Specifies whether key exchange based on GSSAPI is allowed. GSSAPI key exchange
             doesn't rely on ssh keys to verify host identity.  The default is no.

     GSSAPIStrictAcceptorCheck
             Determines whether to be strict about the identity of the GSSAPI acceptor a client
             authenticates against.  If set to yes then the client must authenticate against the
             host service on the current hostname.  If set to no then the client may authenticate
             against any service key stored in the machine's default store.  This facility is
             provided to assist with operation on multi homed machines.  The default is yes.

     GSSAPIStoreCredentialsOnRekey
             Controls whether the user's GSSAPI credentials should be updated following a
             successful connection rekeying. This option can be used to accepted renewed or
             updated credentials from a compatible client. The default is “no”.

             For this to work GSSAPIKeyExchange needs to be enabled in the server and also used
             by the client.

     GSSAPIKexAlgorithms
             The list of key exchange algorithms that are accepted by GSSAPI key exchange.
             Possible values are

                gss-gex-sha1-,
                gss-group1-sha1-,
                gss-group14-sha1-,
                gss-group14-sha256-,
                gss-group16-sha512-,
                gss-nistp256-sha256-,

                gss-curve25519-sha256-
             The default is “gss-gex-sha1-,gss-group14-sha1-”.  This option only applies to
             protocol version 2 connections using GSSAPI.

     HostbasedAcceptedKeyTypes
             Specifies the key types that will be accepted for hostbased authentication as a list
             of comma-separated patterns.  Alternately if the specified list begins with a ‘+’
             character, then the specified key types will be appended to the default set instead
             of replacing them.  If the specified list begins with a ‘-’ character, then the
             specified key types (including wildcards) will be removed from the default set
             instead of replacing them.  If the specified list begins with a ‘^’ character, then
             the specified key types will be placed at the head of the default set.  The default
             for this option is:

                ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ecdsa-sha2-nistp384-cert-v01@openssh.com,
                ecdsa-sha2-nistp521-cert-v01@openssh.com,
                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ssh-ed25519-cert-v01@openssh.com,
                sk-ssh-ed25519-cert-v01@openssh.com,
                rsa-sha2-512-cert-v01@openssh.com,
                rsa-sha2-256-cert-v01@openssh.com,
                ssh-rsa-cert-v01@openssh.com,
                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                sk-ecdsa-sha2-nistp256@openssh.com,
                ssh-ed25519,sk-ssh-ed25519@openssh.com,
                rsa-sha2-512,rsa-sha2-256,ssh-rsa

             The list of available key types may also be obtained using "ssh -Q
             HostbasedAcceptedKeyTypes".

     HostbasedAuthentication
             Specifies whether rhosts or /etc/hosts.equiv authentication together with successful
             public key client host authentication is allowed (host-based authentication).  The
             default is no.

     HostbasedUsesNameFromPacketOnly
             Specifies whether or not the server will attempt to perform a reverse name lookup
             when matching the name in the ~/.shosts, ~/.rhosts, and /etc/hosts.equiv files
             during HostbasedAuthentication.  A setting of yes means that sshd(8) uses the name
             supplied by the client rather than attempting to resolve the name from the TCP
             connection itself.  The default is no.

     HostCertificate
             Specifies a file containing a public host certificate.  The certificate's public key
             must match a private host key already specified by HostKey.  The default behaviour
             of sshd(8) is not to load any certificates.

     HostKey
             Specifies a file containing a private host key used by SSH.  The defaults are
             /etc/ssh/ssh_host_ecdsa_key, /etc/ssh/ssh_host_ed25519_key and
             /etc/ssh/ssh_host_rsa_key.

             Note that sshd(8) will refuse to use a file if it is group/world-accessible and that
             the HostKeyAlgorithms option restricts which of the keys are actually used by
             sshd(8).

             It is possible to have multiple host key files.  It is also possible to specify
             public host key files instead.  In this case operations on the private key will be
             delegated to an ssh-agent(1).

     HostKeyAgent
             Identifies the UNIX-domain socket used to communicate with an agent that has access
             to the private host keys.  If the string "SSH_AUTH_SOCK" is specified, the location
             of the socket will be read from the SSH_AUTH_SOCK environment variable.

     HostKeyAlgorithms
             Specifies the host key algorithms that the server offers.  The default for this
             option is:

                ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ecdsa-sha2-nistp384-cert-v01@openssh.com,
                ecdsa-sha2-nistp521-cert-v01@openssh.com,
                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ssh-ed25519-cert-v01@openssh.com,
                sk-ssh-ed25519-cert-v01@openssh.com,
                rsa-sha2-512-cert-v01@openssh.com,
                rsa-sha2-256-cert-v01@openssh.com,
                ssh-rsa-cert-v01@openssh.com,
                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                sk-ecdsa-sha2-nistp256@openssh.com,
                ssh-ed25519,sk-ssh-ed25519@openssh.com,
                rsa-sha2-512,rsa-sha2-256,ssh-rsa

             The list of available key types may also be obtained using "ssh -Q
             HostKeyAlgorithms".

     IgnoreRhosts
             Specifies that .rhosts and .shosts files will not be used in
             HostbasedAuthentication.

             /etc/hosts.equiv and /etc/ssh/shosts.equiv are still used.  The default is yes.

     IgnoreUserKnownHosts
             Specifies whether sshd(8) should ignore the user's ~/.ssh/known_hosts during
             HostbasedAuthentication and use only the system-wide known hosts file
             /etc/ssh/known_hosts.  The default is “no”.

     Include
             Include the specified configuration file(s).  Multiple pathnames may be specified
             and each pathname may contain glob(7) wildcards.  Files without absolute paths are
             assumed to be in /etc/ssh.  An Include directive may appear inside a Match block to
             perform conditional inclusion.

     IPQoS   Specifies the IPv4 type-of-service or DSCP class for the connection.  Accepted
             values are af11, af12, af13, af21, af22, af23, af31, af32, af33, af41, af42, af43,
             cs0, cs1, cs2, cs3, cs4, cs5, cs6, cs7, ef, le, lowdelay, throughput, reliability, a
             numeric value, or none to use the operating system default.  This option may take
             one or two arguments, separated by whitespace.  If one argument is specified, it is
             used as the packet class unconditionally.  If two values are specified, the first is
             automatically selected for interactive sessions and the second for non-interactive
             sessions.  The default is lowdelay for interactive sessions and throughput for non-
             interactive sessions.

     KbdInteractiveAuthentication
             Specifies whether to allow keyboard-interactive authentication.  The argument to
             this keyword must be yes or no.  The default is to use whatever value
             ChallengeResponseAuthentication is set to (by default yes).

     KerberosAuthentication
             Specifies whether the password provided by the user for PasswordAuthentication will
             be validated through the Kerberos KDC.  To use this option, the server needs a
             Kerberos servtab which allows the verification of the KDC's identity.  The default
             is no.

     KerberosGetAFSToken
             If AFS is active and the user has a Kerberos 5 TGT, attempt to acquire an AFS token
             before accessing the user's home directory.  The default is no.

     KerberosOrLocalPasswd
             If password authentication through Kerberos fails then the password will be
             validated via any additional local mechanism such as /etc/passwd.  The default is
             yes.

     KerberosTicketCleanup
             Specifies whether to automatically destroy the user's ticket cache file on logout.
             The default is yes.

     KexAlgorithms
             Specifies the available KEX (Key Exchange) algorithms.  Multiple algorithms must be
             comma-separated.  Alternately if the specified list begins with a ‘+’ character,
             then the specified methods will be appended to the default set instead of replacing
             them.  If the specified list begins with a ‘-’ character, then the specified methods
             (including wildcards) will be removed from the default set instead of replacing
             them.  If the specified list begins with a ‘^’ character, then the specified methods
             will be placed at the head of the default set.  The supported algorithms are:

                   curve25519-sha256
                   curve25519-sha256@libssh.org
                   diffie-hellman-group1-sha1
                   diffie-hellman-group14-sha1
                   diffie-hellman-group14-sha256
                   diffie-hellman-group16-sha512
                   diffie-hellman-group18-sha512
                   diffie-hellman-group-exchange-sha1
                   diffie-hellman-group-exchange-sha256
                   ecdh-sha2-nistp256
                   ecdh-sha2-nistp384
                   ecdh-sha2-nistp521
                   sntrup4591761x25519-sha512@tinyssh.org

             The default is:

                   curve25519-sha256,curve25519-sha256@libssh.org,
                   ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,
                   diffie-hellman-group-exchange-sha256,
                   diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,
                   diffie-hellman-group14-sha256

             The list of available key exchange algorithms may also be obtained using "ssh -Q
             KexAlgorithms".

     ListenAddress
             Specifies the local addresses sshd(8) should listen on.  The following forms may be
             used:

                   ListenAddress hostname|address [rdomain domain]
                   ListenAddress hostname:port [rdomain domain]
                   ListenAddress IPv4_address:port [rdomain domain]
                   ListenAddress [hostname|address]:port [rdomain domain]

             The optional rdomain qualifier requests sshd(8) listen in an explicit routing
             domain.  If port is not specified, sshd will listen on the address and all Port
             options specified.  The default is to listen on all local addresses on the current
             default routing domain.  Multiple ListenAddress options are permitted.  For more
             information on routing domains, see rdomain(4).

     LoginGraceTime
             The server disconnects after this time if the user has not successfully logged in.
             If the value is 0, there is no time limit.  The default is 120 seconds.

     LogLevel
             Gives the verbosity level that is used when logging messages from sshd(8).  The
             possible values are: QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and
             DEBUG3.  The default is INFO.  DEBUG and DEBUG1 are equivalent.  DEBUG2 and DEBUG3
             each specify higher levels of debugging output.  Logging with a DEBUG level violates
             the privacy of users and is not recommended.

     MACs    Specifies the available MAC (message authentication code) algorithms.  The MAC
             algorithm is used for data integrity protection.  Multiple algorithms must be comma-
             separated.  If the specified list begins with a ‘+’ character, then the specified
             algorithms will be appended to the default set instead of replacing them.  If the
             specified list begins with a ‘-’ character, then the specified algorithms (including
             wildcards) will be removed from the default set instead of replacing them.  If the
             specified list begins with a ‘^’ character, then the specified algorithms will be
             placed at the head of the default set.

             The algorithms that contain "-etm" calculate the MAC after encryption (encrypt-then-
             mac).  These are considered safer and their use recommended.  The supported MACs
             are:

                   hmac-md5
                   hmac-md5-96
                   hmac-sha1
                   hmac-sha1-96
                   hmac-sha2-256
                   hmac-sha2-512
                   umac-64@openssh.com
                   umac-128@openssh.com
                   hmac-md5-etm@openssh.com
                   hmac-md5-96-etm@openssh.com
                   hmac-sha1-etm@openssh.com
                   hmac-sha1-96-etm@openssh.com
                   hmac-sha2-256-etm@openssh.com
                   hmac-sha2-512-etm@openssh.com
                   umac-64-etm@openssh.com
                   umac-128-etm@openssh.com

             The default is:

                   umac-64-etm@openssh.com,umac-128-etm@openssh.com,
                   hmac-sha2-256-etm@openssh.com,hmac-sha2-512-etm@openssh.com,
                   hmac-sha1-etm@openssh.com,
                   umac-64@openssh.com,umac-128@openssh.com,
                   hmac-sha2-256,hmac-sha2-512,hmac-sha1

             The list of available MAC algorithms may also be obtained using "ssh -Q mac".

     Match   Introduces a conditional block.  If all of the criteria on the Match line are
             satisfied, the keywords on the following lines override those set in the global
             section of the config file, until either another Match line or the end of the file.
             If a keyword appears in multiple Match blocks that are satisfied, only the first
             instance of the keyword is applied.

             The arguments to Match are one or more criteria-pattern pairs or the single token
             All which matches all criteria.  The available criteria are User, Group, Host,
             LocalAddress, LocalPort, RDomain, and Address (with RDomain representing the
             rdomain(4) on which the connection was received).

             The match patterns may consist of single entries or comma-separated lists and may
             use the wildcard and negation operators described in the PATTERNS section of
             ssh_config(5).

             The patterns in an Address criteria may additionally contain addresses to match in
             CIDR address/masklen format, such as 192.0.2.0/24 or 2001:db8::/32.  Note that the
             mask length provided must be consistent with the address - it is an error to specify
             a mask length that is too long for the address or one with bits set in this host
             portion of the address.  For example, 192.0.2.0/33 and 192.0.2.0/8, respectively.

             Only a subset of keywords may be used on the lines following a Match keyword.
             Available keywords are AcceptEnv, AllowAgentForwarding, AllowGroups,
             AllowStreamLocalForwarding, AllowTcpForwarding, AllowUsers, AuthenticationMethods,
             AuthorizedKeysCommand, AuthorizedKeysCommandUser, AuthorizedKeysFile,
             AuthorizedPrincipalsCommand, AuthorizedPrincipalsCommandUser,
             AuthorizedPrincipalsFile, Banner, ChrootDirectory, ClientAliveCountMax,
             ClientAliveInterval, DenyGroups, DenyUsers, ForceCommand, GatewayPorts,
             GSSAPIAuthentication, HostbasedAcceptedKeyTypes, HostbasedAuthentication,
             HostbasedUsesNameFromPacketOnly, Include, IPQoS, KbdInteractiveAuthentication,
             KerberosAuthentication, LogLevel, MaxAuthTries, MaxSessions, PasswordAuthentication,
             PermitEmptyPasswords, PermitListen, PermitOpen, PermitRootLogin, PermitTTY,
             PermitTunnel, PermitUserRC, PubkeyAcceptedKeyTypes, PubkeyAuthentication,
             RekeyLimit, RevokedKeys, RDomain, SetEnv, StreamLocalBindMask,
             StreamLocalBindUnlink, TrustedUserCAKeys, X11DisplayOffset, X11Forwarding and
             X11UseLocalhost.

     MaxAuthTries
             Specifies the maximum number of authentication attempts permitted per connection.
             Once the number of failures reaches half this value, additional failures are logged.
             The default is 6.

     MaxSessions
             Specifies the maximum number of open shell, login or subsystem (e.g. sftp) sessions
             permitted per network connection.  Multiple sessions may be established by clients
             that support connection multiplexing.  Setting MaxSessions to 1 will effectively
             disable session multiplexing, whereas setting it to 0 will prevent all shell, login
             and subsystem sessions while still permitting forwarding.  The default is 10.

     MaxStartups
             Specifies the maximum number of concurrent unauthenticated connections to the SSH
             daemon.  Additional connections will be dropped until authentication succeeds or the
             LoginGraceTime expires for a connection.  The default is 10:30:100.

             Alternatively, random early drop can be enabled by specifying the three colon
             separated values start:rate:full (e.g. "10:30:60").  sshd(8) will refuse connection
             attempts with a probability of rate/100 (30%) if there are currently start (10)
             unauthenticated connections.  The probability increases linearly and all connection
             attempts are refused if the number of unauthenticated connections reaches full (60).

     PasswordAuthentication
             Specifies whether password authentication is allowed.  The default is yes.

     PermitEmptyPasswords
             When password authentication is allowed, it specifies whether the server allows
             login to accounts with empty password strings.  The default is no.

     PermitListen
             Specifies the addresses/ports on which a remote TCP port forwarding may listen.  The
             listen specification must be one of the following forms:

                   PermitListen port
                   PermitListen host:port

             Multiple permissions may be specified by separating them with whitespace.  An
             argument of any can be used to remove all restrictions and permit any listen
             requests.  An argument of none can be used to prohibit all listen requests.  The
             host name may contain wildcards as described in the PATTERNS section in
             ssh_config(5).  The wildcard ‘*’ can also be used in place of a port number to allow
             all ports.  By default all port forwarding listen requests are permitted.  Note that
             the GatewayPorts option may further restrict which addresses may be listened on.
             Note also that ssh(1) will request a listen host of “localhost” if no listen host
             was specifically requested, and this name is treated differently to explicit
             localhost addresses of “127.0.0.1” and “::1”.

     PermitOpen
             Specifies the destinations to which TCP port forwarding is permitted.  The
             forwarding specification must be one of the following forms:

                   PermitOpen host:port
                   PermitOpen IPv4_addr:port
                   PermitOpen [IPv6_addr]:port

             Multiple forwards may be specified by separating them with whitespace.  An argument
             of any can be used to remove all restrictions and permit any forwarding requests.
             An argument of none can be used to prohibit all forwarding requests.  The wildcard
             ‘*’ can be used for host or port to allow all hosts or ports respectively.
             Otherwise, no pattern matching or address lookups are performed on supplied names.
             By default all port forwarding requests are permitted.

     PermitRootLogin
             Specifies whether root can log in using ssh(1).  The argument must be yes,
             prohibit-password, forced-commands-only, or no.  The default is prohibit-password.

             If this option is set to prohibit-password (or its deprecated alias,
             without-password), password and keyboard-interactive authentication are disabled for
             root.

             If this option is set to forced-commands-only, root login with public key
             authentication will be allowed, but only if the command option has been specified
             (which may be useful for taking remote backups even if root login is normally not
             allowed).  All other authentication methods are disabled for root.

             If this option is set to no, root is not allowed to log in.

     PermitTTY
             Specifies whether pty(4) allocation is permitted.  The default is yes.

     PermitTunnel
             Specifies whether tun(4) device forwarding is allowed.  The argument must be yes,
             point-to-point (layer 3), ethernet (layer 2), or no.  Specifying yes permits both
             point-to-point and ethernet.  The default is no.

             Independent of this setting, the permissions of the selected tun(4) device must
             allow access to the user.

     PermitUserEnvironment
             Specifies whether ~/.ssh/environment and environment= options in
             ~/.ssh/authorized_keys are processed by sshd(8).  Valid options are yes, no or a
             pattern-list specifying which environment variable names to accept (for example
             "LANG,LC_*").  The default is no.  Enabling environment processing may enable users
             to bypass access restrictions in some configurations using mechanisms such as
             LD_PRELOAD.

     PermitUserRC
             Specifies whether any ~/.ssh/rc file is executed.  The default is yes.

     PidFile
             Specifies the file that contains the process ID of the SSH daemon, or none to not
             write one.  The default is /run/sshd.pid.

     Port    Specifies the port number that sshd(8) listens on.  The default is 22.  Multiple
             options of this type are permitted.  See also ListenAddress.

     PrintLastLog
             Specifies whether sshd(8) should print the date and time of the last user login when
             a user logs in interactively.  The default is yes.

     PrintMotd
             Specifies whether sshd(8) should print /etc/motd when a user logs in interactively.
             (On some systems it is also printed by the shell, /etc/profile, or equivalent.)  The
             default is yes.

     PubkeyAcceptedKeyTypes
             Specifies the key types that will be accepted for public key authentication as a
             list of comma-separated patterns.  Alternately if the specified list begins with a
             ‘+’ character, then the specified key types will be appended to the default set
             instead of replacing them.  If the specified list begins with a ‘-’ character, then
             the specified key types (including wildcards) will be removed from the default set
             instead of replacing them.  If the specified list begins with a ‘^’ character, then
             the specified key types will be placed at the head of the default set.  The default
             for this option is:

                ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ecdsa-sha2-nistp384-cert-v01@openssh.com,
                ecdsa-sha2-nistp521-cert-v01@openssh.com,
                sk-ecdsa-sha2-nistp256-cert-v01@openssh.com,
                ssh-ed25519-cert-v01@openssh.com,
                sk-ssh-ed25519-cert-v01@openssh.com,
                rsa-sha2-512-cert-v01@openssh.com,
                rsa-sha2-256-cert-v01@openssh.com,
                ssh-rsa-cert-v01@openssh.com,
                ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,
                sk-ecdsa-sha2-nistp256@openssh.com,
                ssh-ed25519,sk-ssh-ed25519@openssh.com,
                rsa-sha2-512,rsa-sha2-256,ssh-rsa

             The list of available key types may also be obtained using "ssh -Q
             PubkeyAcceptedKeyTypes".

     PubkeyAuthOptions
             Sets one or more public key authentication options.  Two option keywords are
             currently supported: none (the default; indicating no additional options are
             enabled) and touch-required.

             The touch-required option causes public key authentication using a FIDO
             authenticator algorithm (i.e. ecdsa-sk or ed25519-sk) to always require the
             signature to attest that a physically present user explicitly confirmed the
             authentication (usually by touching the authenticator).  By default, sshd(8)
             requires user presence unless overridden with an authorized_keys option.  The
             touch-required flag disables this override.  This option has no effect for other,
             non-authenticator public key types.

     PubkeyAuthentication
             Specifies whether public key authentication is allowed.  The default is yes.

     RekeyLimit
             Specifies the maximum amount of data that may be transmitted before the session key
             is renegotiated, optionally followed a maximum amount of time that may pass before
             the session key is renegotiated.  The first argument is specified in bytes and may
             have a suffix of ‘K’, ‘M’, or ‘G’ to indicate Kilobytes, Megabytes, or Gigabytes,
             respectively.  The default is between ‘1G’ and ‘4G’, depending on the cipher.  The
             optional second value is specified in seconds and may use any of the units
             documented in the TIME FORMATS section.  The default value for RekeyLimit is default
             none, which means that rekeying is performed after the cipher's default amount of
             data has been sent or received and no time based rekeying is done.

     RevokedKeys
             Specifies revoked public keys file, or none to not use one.  Keys listed in this
             file will be refused for public key authentication.  Note that if this file is not
             readable, then public key authentication will be refused for all users.  Keys may be
             specified as a text file, listing one public key per line, or as an OpenSSH Key
             Revocation List (KRL) as generated by ssh-keygen(1).  For more information on KRLs,
             see the KEY REVOCATION LISTS section in ssh-keygen(1).

     RDomain
             Specifies an explicit routing domain that is applied after authentication has
             completed.  The user session, as well and any forwarded or listening IP sockets,
             will be bound to this rdomain(4).  If the routing domain is set to %D, then the
             domain in which the incoming connection was received will be applied.

     SecurityKeyProvider
             Specifies a path to a library that will be used when loading FIDO authenticator-
             hosted keys, overriding the default of using the built-in USB HID support.

     SetEnv  Specifies one or more environment variables to set in child sessions started by
             sshd(8) as “NAME=VALUE”.  The environment value may be quoted (e.g. if it contains
             whitespace characters).  Environment variables set by SetEnv override the default
             environment and any variables specified by the user via AcceptEnv or
             PermitUserEnvironment.

     StreamLocalBindMask
             Sets the octal file creation mode mask (umask) used when creating a Unix-domain
             socket file for local or remote port forwarding.  This option is only used for port
             forwarding to a Unix-domain socket file.

             The default value is 0177, which creates a Unix-domain socket file that is readable
             and writable only by the owner.  Note that not all operating systems honor the file
             mode on Unix-domain socket files.

     StreamLocalBindUnlink
             Specifies whether to remove an existing Unix-domain socket file for local or remote
             port forwarding before creating a new one.  If the socket file already exists and
             StreamLocalBindUnlink is not enabled, sshd will be unable to forward the port to the
             Unix-domain socket file.  This option is only used for port forwarding to a Unix-
             domain socket file.

             The argument must be yes or no.  The default is no.

     StrictModes
             Specifies whether sshd(8) should check file modes and ownership of the user's files
             and home directory before accepting login.  This is normally desirable because
             novices sometimes accidentally leave their directory or files world-writable.  The
             default is yes.  Note that this does not apply to ChrootDirectory, whose permissions
             and ownership are checked unconditionally.

     Subsystem
             Configures an external subsystem (e.g. file transfer daemon).  Arguments should be a
             subsystem name and a command (with optional arguments) to execute upon subsystem
             request.

             The command sftp-server implements the SFTP file transfer subsystem.

             Alternately the name internal-sftp implements an in-process SFTP server.  This may
             simplify configurations using ChrootDirectory to force a different filesystem root
             on clients.

             By default no subsystems are defined.

     SyslogFacility
             Gives the facility code that is used when logging messages from sshd(8).  The
             possible values are: DAEMON, USER, AUTH, LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4,
             LOCAL5, LOCAL6, LOCAL7.  The default is AUTH.

     TCPKeepAlive
             Specifies whether the system should send TCP keepalive messages to the other side.
             If they are sent, death of the connection or crash of one of the machines will be
             properly noticed.  However, this means that connections will die if the route is
             down temporarily, and some people find it annoying.  On the other hand, if TCP
             keepalives are not sent, sessions may hang indefinitely on the server, leaving
             "ghost" users and consuming server resources.

             The default is yes (to send TCP keepalive messages), and the server will notice if
             the network goes down or the client host crashes.  This avoids infinitely hanging
             sessions.

             To disable TCP keepalive messages, the value should be set to no.

             This option was formerly called KeepAlive.

     TrustedUserCAKeys
             Specifies a file containing public keys of certificate authorities that are trusted
             to sign user certificates for authentication, or none to not use one.  Keys are
             listed one per line; empty lines and comments starting with ‘#’ are allowed.  If a
             certificate is presented for authentication and has its signing CA key listed in
             this file, then it may be used for authentication for any user listed in the
             certificate's principals list.  Note that certificates that lack a list of
             principals will not be permitted for authentication using TrustedUserCAKeys.  For
             more details on certificates, see the CERTIFICATES section in ssh-keygen(1).

     UseDNS  Specifies whether sshd(8) should look up the remote host name, and to check that the
             resolved host name for the remote IP address maps back to the very same IP address.

             If this option is set to no (the default) then only addresses and not host names may
             be used in ~/.ssh/authorized_keys from and sshd_config Match Host directives.

     UsePAM  Enables the Pluggable Authentication Module interface.  If set to yes this will
             enable PAM authentication using ChallengeResponseAuthentication and
             PasswordAuthentication in addition to PAM account and session module processing for
             all authentication types.

             Because PAM challenge-response authentication usually serves an equivalent role to
             password authentication, you should disable either PasswordAuthentication or
             ChallengeResponseAuthentication.

             If UsePAM is enabled, you will not be able to run sshd(8) as a non-root user.  The
             default is no.

     VersionAddendum
             Optionally specifies additional text to append to the SSH protocol banner sent by
             the server upon connection.  The default is none.

     X11DisplayOffset
             Specifies the first display number available for sshd(8)'s X11 forwarding.  This
             prevents sshd from interfering with real X11 servers.  The default is 10.

     X11Forwarding
             Specifies whether X11 forwarding is permitted.  The argument must be yes or no.  The
             default is no.

             When X11 forwarding is enabled, there may be additional exposure to the server and
             to client displays if the sshd(8) proxy display is configured to listen on the
             wildcard address (see X11UseLocalhost), though this is not the default.
             Additionally, the authentication spoofing and authentication data verification and
             substitution occur on the client side.  The security risk of using X11 forwarding is
             that the client's X11 display server may be exposed to attack when the SSH client
             requests forwarding (see the warnings for ForwardX11 in ssh_config(5)).  A system
             administrator may have a stance in which they want to protect clients that may
             expose themselves to attack by unwittingly requesting X11 forwarding, which can
             warrant a no setting.

             Note that disabling X11 forwarding does not prevent users from forwarding X11
             traffic, as users can always install their own forwarders.

     X11UseLocalhost
             Specifies whether sshd(8) should bind the X11 forwarding server to the loopback
             address or to the wildcard address.  By default, sshd binds the forwarding server to
             the loopback address and sets the hostname part of the DISPLAY environment variable
             to localhost.  This prevents remote hosts from connecting to the proxy display.
             However, some older X11 clients may not function with this configuration.
             X11UseLocalhost may be set to no to specify that the forwarding server should be
             bound to the wildcard address.  The argument must be yes or no.  The default is yes.

     XAuthLocation
             Specifies the full pathname of the xauth(1) program, or none to not use one.  The
             default is /usr/bin/xauth.

TIME FORMATS

     sshd(8) command-line arguments and configuration file options that specify time may be
     expressed using a sequence of the form: time[qualifier], where time is a positive integer
     value and qualifier is one of the following:

           ⟨none⟩  seconds
           s | S   seconds
           m | M   minutes
           h | H   hours
           d | D   days
           w | W   weeks

     Each member of the sequence is added together to calculate the total time value.

     Time format examples:

           600     600 seconds (10 minutes)
           10m     10 minutes
           1h30m   1 hour 30 minutes (90 minutes)

TOKENS

     Arguments to some keywords can make use of tokens, which are expanded at runtime:

           %%    A literal ‘%’.
           %D    The routing domain in which the incoming connection was received.
           %F    The fingerprint of the CA key.
           %f    The fingerprint of the key or certificate.
           %h    The home directory of the user.
           %i    The key ID in the certificate.
           %K    The base64-encoded CA key.
           %k    The base64-encoded key or certificate for authentication.
           %s    The serial number of the certificate.
           %T    The type of the CA key.
           %t    The key or certificate type.
           %U    The numeric user ID of the target user.
           %u    The username.

     AuthorizedKeysCommand accepts the tokens %%, %f, %h, %k, %t, %U, and %u.

     AuthorizedKeysFile accepts the tokens %%, %h, %U, and %u.

     AuthorizedPrincipalsCommand accepts the tokens %%, %F, %f, %h, %i, %K, %k, %s, %T, %t, %U,
     and %u.

     AuthorizedPrincipalsFile accepts the tokens %%, %h, %U, and %u.

     ChrootDirectory accepts the tokens %%, %h, %U, and %u.

     RoutingDomain accepts the token %D.

FILES

     /etc/ssh/sshd_config
             Contains configuration data for sshd(8).  This file should be writable by root only,
             but it is recommended (though not necessary) that it be world-readable.

SEE ALSO

     sftp-server(8), sshd(8)

AUTHORS

     OpenSSH is a derivative of the original and free ssh 1.2.12 release by Tatu Ylonen.  Aaron
     Campbell, Bob Beck, Markus Friedl, Niels Provos, Theo de Raadt and Dug Song removed many
     bugs, re-added newer features and created OpenSSH.  Markus Friedl contributed the support
     for SSH protocol versions 1.5 and 2.0.  Niels Provos and Markus Friedl contributed support
     for privilege separation.