Provided by: libsss-certmap0_2.2.3-3ubuntu0.13_amd64 
NAME
sss-certmap - SSSD Certificate Matching and Mapping Rules
DESCRIPTION
The manual page describes the rules which can be used by SSSD and other components to
match X.509 certificates and map them to accounts.
Each rule has four components, a “priority”, a “matching rule”, a “mapping rule” and a
“domain list”. All components are optional. A missing “priority” will add the rule with
the lowest priority. The default “matching rule” will match certificates with the
digitalSignature key usage and clientAuth extended key usage. If the “mapping rule” is
empty the certificates will be searched in the userCertificate attribute as DER encoded
binary. If no domains are given only the local domain will be searched.
RULE COMPONENTS
PRIORITY
The rules are processed by priority while the number '0' (zero) indicates the highest
priority. The higher the number the lower is the priority. A missing value indicates the
lowest priority. The rules processing is stopped when a matched rule is found and no
further rules are checked.
Internally the priority is treated as unsigned 32bit integer, using a priority value
larger than 4294967295 will cause an error.
MATCHING RULE
The matching rule is used to select a certificate to which the mapping rule should be
applied. It uses a system similar to the one used by “pkinit_cert_match” option of MIT
Kerberos. It consists of a keyword enclosed by '<' and '>' which identified a certain part
of the certificate and a pattern which should be found for the rule to match. Multiple
keyword pattern pairs can be either joined with '&&' (and) or '||' (or).
The available options are:
<SUBJECT>regular-expression
With this a part or the whole subject name of the certificate can be matched. For the
matching POSIX Extended Regular Expression syntax is used, see regex(7) for details.
For the matching the subject name stored in the certificate in DER encoded ASN.1 is
converted into a string according to RFC 4514. This means the most specific name
component comes first. Please note that not all possible attribute names are covered
by RFC 4514. The names included are 'CN', 'L', 'ST', 'O', 'OU', 'C', 'STREET', 'DC'
and 'UID'. Other attribute names might be shown differently on different platform and
by different tools. To avoid confusion those attribute names are best not used or
covered by a suitable regular-expression.
Example: <SUBJECT>.*,DC=MY,DC=DOMAIN
<ISSUER>regular-expression
With this a part or the whole issuer name of the certificate can be matched. All
comments for <SUBJECT> apply her as well.
Example: <ISSUER>^CN=My-CA,DC=MY,DC=DOMAIN$
<KU>key-usage
This option can be used to specify which key usage values the certificate should have.
The following values can be used in a comma separated list:
• digitalSignature
• nonRepudiation
• keyEncipherment
• dataEncipherment
• keyAgreement
• keyCertSign
• cRLSign
• encipherOnly
• decipherOnly
A numerical value in the range of a 32bit unsigned integer can be used as well to
cover special use cases.
Example: <KU>digitalSignature,keyEncipherment
<EKU>extended-key-usage
This option can be used to specify which extended key usage the certificate should
have. The following value can be used in a comma separated list:
• serverAuth
• clientAuth
• codeSigning
• emailProtection
• timeStamping
• OCSPSigning
• KPClientAuth
• pkinit
• msScLogin
Extended key usages which are not listed above can be specified with their OID in
dotted-decimal notation.
Example: <EKU>clientAuth,1.3.6.1.5.2.3.4
<SAN>regular-expression
To be compatible with the usage of MIT Kerberos this option will match the Kerberos
principals in the PKINIT or AD NT Principal SAN as <SAN:Principal> does.
Example: <SAN>.*@MY\.REALM
<SAN:Principal>regular-expression
Match the Kerberos principals in the PKINIT or AD NT Principal SAN.
Example: <SAN:Principal>.*@MY\.REALM
<SAN:ntPrincipalName>regular-expression
Match the Kerberos principals from the AD NT Principal SAN.
Example: <SAN:ntPrincipalName>.*@MY.AD.REALM
<SAN:pkinit>regular-expression
Match the Kerberos principals from the PKINIT SAN.
Example: <SAN:ntPrincipalName>.*@MY\.PKINIT\.REALM
<SAN:dotted-decimal-oid>regular-expression
Take the value of the otherName SAN component given by the OID in dotted-decimal
notation, interpret it as string and try to match it against the regular expression.
Example: <SAN:1.2.3.4>test
<SAN:otherName>base64-string
Do a binary match with the base64 encoded blob against all otherName SAN components.
With this option it is possible to match against custom otherName components with
special encodings which could not be treated as strings.
Example: <SAN:otherName>MTIz
<SAN:rfc822Name>regular-expression
Match the value of the rfc822Name SAN.
Example: <SAN:rfc822Name>.*@email\.domain
<SAN:dNSName>regular-expression
Match the value of the dNSName SAN.
Example: <SAN:dNSName>.*\.my\.dns\.domain
<SAN:x400Address>base64-string
Binary match the value of the x400Address SAN.
Example: <SAN:x400Address>MTIz
<SAN:directoryName>regular-expression
Match the value of the directoryName SAN. The same comments as given for <ISSUER> and
<SUBJECT> apply here as well.
Example: <SAN:directoryName>.*,DC=com
<SAN:ediPartyName>base64-string
Binary match the value of the ediPartyName SAN.
Example: <SAN:ediPartyName>MTIz
<SAN:uniformResourceIdentifier>regular-expression
Match the value of the uniformResourceIdentifier SAN.
Example: <SAN:uniformResourceIdentifier>URN:.*
<SAN:iPAddress>regular-expression
Match the value of the iPAddress SAN.
Example: <SAN:iPAddress>192\.168\..*
<SAN:registeredID>regular-expression
Match the value of the registeredID SAN as dotted-decimal string.
Example: <SAN:registeredID>1\.2\.3\..*
MAPPING RULE
The mapping rule is used to associate a certificate with one or more accounts. A Smartcard
with the certificate and the matching private key can then be used to authenticate as one
of those accounts.
Currently SSSD basically only supports LDAP to lookup user information (the exception is
the proxy provider which is not of relevance here). Because of this the mapping rule is
based on LDAP search filter syntax with templates to add certificate content to the
filter. It is expected that the filter will only contain the specific data needed for the
mapping and that the caller will embed it in another filter to do the actual search.
Because of this the filter string should start and stop with '(' and ')' respectively.
In general it is recommended to use attributes from the certificate and add them to
special attributes to the LDAP user object. E.g. the 'altSecurityIdentities' attribute in
AD or the 'ipaCertMapData' attribute for IPA can be used.
This should be preferred to read user specific data from the certificate like e.g. an
email address and search for it in the LDAP server. The reason is that the user specific
data in LDAP might change for various reasons would break the mapping. On the other hand
it would be hard to break the mapping on purpose for a specific user.
The templates to add certificate data to the search filter are based on Python-style
formatting strings. They consist of a keyword in curly braces with an optional
sub-component specifier separated by a '.' or an optional conversion/formatting option
separated by a '!'. Allowed values are:
{issuer_dn[!((ad|ad_x500)|ad_ldap|nss_x500|(nss|nss_ldap))]}
This template will add the full issuer DN converted to a string according to RFC 4514.
If X.500 ordering (most specific RDN comes last) an option with the '_x500' prefix
should be used.
The conversion options starting with 'ad_' will use attribute names as used by AD,
e.g. 'S' instead of 'ST'.
The conversion options starting with 'nss_' will use attribute names as used by NSS.
The default conversion option is 'nss', i.e. attribute names according to NSS and
LDAP/RFC 4514 ordering.
Example: (ipacertmapdata=X509:<I>{issuer_dn!ad}<S>{subject_dn!ad})
{subject_dn[!((ad|ad_x500)|ad_ldap|nss_x500|(nss|nss_ldap))]}
This template will add the full subject DN converted to string according to RFC 4514.
If X.500 ordering (most specific RDN comes last) an option with the '_x500' prefix
should be used.
The conversion options starting with 'ad_' will use attribute names as used by AD,
e.g. 'S' instead of 'ST'.
The conversion options starting with 'nss_' will use attribute names as used by NSS.
The default conversion option is 'nss', i.e. attribute names according to NSS and
LDAP/RFC 4514 ordering.
Example: (ipacertmapdata=X509:<I>{issuer_dn!nss_x500}<S>{subject_dn!nss_x500})
{cert[!(bin|base64)]}
This template will add the whole DER encoded certificate as a string to the search
filter. Depending on the conversion option the binary certificate is either converted
to an escaped hex sequence '\xx' or base64. The escaped hex sequence is the default
and can e.g. be used with the LDAP attribute 'userCertificate;binary'.
Example: (userCertificate;binary={cert!bin})
{subject_principal[.short_name]}
This template will add the Kerberos principal which is taken either from the SAN used
by pkinit or the one used by AD. The 'short_name' component represents the first part
of the principal before the '@' sign.
Example:
(|(userPrincipal={subject_principal})(samAccountName={subject_principal.short_name}))
{subject_pkinit_principal[.short_name]}
This template will add the Kerberos principal which is given by the SAN used by
pkinit. The 'short_name' component represents the first part of the principal before
the '@' sign.
Example:
(|(userPrincipal={subject_pkinit_principal})(uid={subject_pkinit_principal.short_name}))
{subject_nt_principal[.short_name]}
This template will add the Kerberos principal which is given by the SAN used by AD.
The 'short_name' component represent the first part of the principal before the '@'
sign.
Example:
(|(userPrincipal={subject_principal})(samAccountName={subject_principal.short_name}))
{subject_rfc822_name[.short_name]}
This template will add the string which is stored in the rfc822Name component of the
SAN, typically an email address. The 'short_name' component represents the first part
of the address before the '@' sign.
Example: (|(mail={subject_rfc822_name})(uid={subject_rfc822_name.short_name}))
{subject_dns_name[.short_name]}
This template will add the string which is stored in the dNSName component of the SAN,
typically a fully-qualified host name. The 'short_name' component represents the first
part of the name before the first '.' sign.
Example: (|(fqdn={subject_dns_name})(host={subject_dns_name.short_name}))
{subject_uri}
This template will add the string which is stored in the uniformResourceIdentifier
component of the SAN.
Example: (uri={subject_uri})
{subject_ip_address}
This template will add the string which is stored in the iPAddress component of the
SAN.
Example: (ip={subject_ip_address})
{subject_x400_address}
This template will add the value which is stored in the x400Address component of the
SAN as escaped hex sequence.
Example: (attr:binary={subject_x400_address})
{subject_directory_name[!((ad|ad_x500)|ad_ldap|nss_x500|(nss|nss_ldap))]}
This template will add the DN string of the value which is stored in the directoryName
component of the SAN.
Example: (orig_dn={subject_directory_name})
{subject_ediparty_name}
This template will add the value which is stored in the ediPartyName component of the
SAN as escaped hex sequence.
Example: (attr:binary={subject_ediparty_name})
{subject_registered_id}
This template will add the OID which is stored in the registeredID component of the
SAN as a dotted-decimal string.
Example: (oid={subject_registered_id})
DOMAIN LIST
If the domain list is not empty users mapped to a given certificate are not only searched
in the local domain but in the listed domains as well as long as they are know by SSSD.
Domains not know to SSSD will be ignored.
AUTHORS
The SSSD upstream - https://pagure.io/SSSD/sssd/