Provided by: kea-admin_1.6.2-0ubuntu1_amd64 
NAME
perfdhcp - DHCP benchmarking tool
SYNOPSIS
perfdhcp [-1] [-4**|-6**] [-A encapsulation-level] [-b base] [-B] [-c] [-d drop-time] [-D max-drop] [-e
lease-type] [-E time-offset] [-f renew-rate] [-F release-rate] [-g thread-mode] [-h] [-i] [-I ip-offset]
[-l local-address|interface] [-L local-port] [-M mac-list-file] [-n num-request] [-N remote-port] [-O
random-offset] [-o code,hexstring] [-p test-period] [-P preload] [-r rate] [-R num-clients] [-s seed] [-S
srvid-offset] [-t report] [-T template-file] [-v] [-W exit-wait-time] [-w script_name] [-x
diagnostic-selector] [-X xid-offset] [server]
DESCRIPTION
perfdhcp is a DHCP benchmarking tool. It provides a way of measuring the performance of DHCP servers by
generating large amounts of traffic from simulated multiple clients. It is able to test both IPv4 and
IPv6 servers, and provides statistics concerning response times and the number of requests that are
dropped.
By default, tests are run using the full four-packet exchange sequence (DORA for DHCPv4, SARR for
DHCPv6). An option is provided to run tests using the initial two-packet exchange (DO and SA) instead. It
is also possible to configure perfdhcp to send DHCPv6 RENEW and RELEASE messages at a specified rate in
parallel with the DHCPv6 four-way exchanges.
When running a performance test, perfdhcp will exchange packets with the server under test as fast as
possible unless the -r parameter is used to limit the request rate. The length of the test can be limited
by setting a threshold on any or all of the number of requests made by perfdhcp, the elapsed time, or the
number of requests dropped by the server.
TEMPLATES
To allow the contents of packets sent to the server to be customized, perfdhcp allows the specification
of template files that determine the contents of the packets. For example, the customized packet may
contain a DHCPv6 ORO to request a set of options to be returned by the server, or it may contain the
Client FQDN option to request that the server perform DNS updates. This may be used to discover
performance bottlenecks for different server configurations (e.g. DDNS enabled or disabled).
Up to two template files can be specified on the command line, each file representing the contents of a
particular type of packet, the type being determined by the test being carried out. For example, if
testing DHCPv6:
• With no template files specified on the command line, perfdhcp will generate both SOLICIT and REQUEST
packets.
• With one template file specified, that file will be used as the pattern for SOLICIT packets: perfdhcp
will generate the REQUEST packets.
• With two template files given on the command line, the first will be used as the pattern for SOLICIT
packets, the second as the pattern for REQUEST packets.
(Similar determination applies to DHCPv4's DISCOVER and REQUEST packets.)
The template file holds the DHCP packet represented as a stream of ASCII hexadecimal digits and it
excludes any IP/UDP stack headers. The template file must not contain any characters other than
hexadecimal digits and spaces. Spaces are discarded when the template file is parsed; in the file, '12B4'
is the same as '12 B4' which is the same as '1 2 B 4'.
The template files should be used in conjunction with the command-line parameters which specify offsets
of the data fields being modified in outbound packets. For example, the -E time-offset switch specifies
the offset of the DHCPv6 Elapsed Time option in the packet template. If the offset is specified,
perfdhcp will inject the current elapsed-time value into this field before sending the packet to the
server.
In many scenarios, perfdhcp needs to simulate multiple clients, each having a unique client identifier.
Since packets for each client are generated from the same template file, it is necessary to randomize the
client identifier (or HW address in DHCPv4) in the packet created from it. The -O random-offset option
allows specification of the offset in the template where randomization should be performed. It is
important to note that this offset points to the end (not the beginning) of the client identifier (or HW
address field). The number of bytes being randomized depends on the number of simulated clients. If the
number of simulated clients is between 1 and 255, only one byte (to which the randomization offset
points) will be randomized. If the number of simulated clients is between 256 and 65535, two bytes will
be randomized. Note that the last two bytes of the client identifier will be randomized in this case: the
byte which the randomization offset parameter points to, and the one which precedes it (random-offset -
1). If the number of simulated clients exceeds 65535, three bytes will be randomized, and so on.
Templates may currently be used to generate packets being sent to the server in 4-way exchanges, i.e.
SOLICIT, REQUEST (DHCPv6) and DISCOVER, REQUEST (DHCPv4). They cannot be used when RENEW or RELEASE
packets are being sent.
OPTIONS
-1 Takes the server-ID option from the first received message.
-4 Establishes DHCPv4 operation; this is the default. It is incompatible with the -6 option.
-6 Establishes DHCPv6 operation. This is incompatible with the -4 option.
-b basetype=value
Indicates the base MAC or DUID used to simulate different clients. The basetype may be "mac" or
"duid". (The keyword "ether" may alternatively used for MAC.) The -b option can be specified
multiple times. The MAC address must consist of six octets separated by single (:) or double (::)
colons, for example: mac=00:0c:01:02:03:04. The DUID value is a hexadecimal string; it must be at
least six octets long and not longer than 64 bytes, and the length must be less than 128
hexadecimal digits, for example: duid=0101010101010101010110111F14.
-d drop-time
Specifies the time after which a request is treated as having been lost. The value is given in
seconds and may contain a fractional component. The default is 1 second.
-e lease-type
Specifies the type of lease being requested from the server. It may be one of the following:
address-only
Only regular addresses (v4 or v6) will be requested.
prefix-only
Only IPv6 prefixes will be requested.
address-and-prefix
Both IPv6 addresses and prefixes will be requested.
The -e prefix-only and -e address-and-prefix forms may not be used with the -4 option.
-f renew-rate
Specifies the rate at which DHCPv4 or DHCPv6 renew requests are sent to a server. This value is
only valid when used in conjunction with the exchange rate (given by -r rate). Furthermore, the
sum of this value and the release-rate (given by -F rate) must be equal to or less than the
exchange rate.
-g thread-mode
Allows selection of thread-mode, which can be either 'single' or 'multi'. In multi-thread mode
packets are received in a separate thread, which allows better utilisation of CPUs. In a
single-CPU system it is better to run in one thread to avoid threads blocking each other. If more
than one CPU is present in the system, multi-thread mode is the default; otherwise single-thread
is the default.
-h Prints help and exits.
-i Performs only the initial part of the exchange: DISCOVER-OFFER if -4 is selected,
SOLICIT-ADVERTISE if -6 is chosen.
-i is incompatible with the following options: -1, -d, -D, -E, -S, -I and -F. In addition, it
cannot be used with multiple instances of -O, -T and -X.
-l local-addr|interface
For DHCPv4 operation, specifies the local hostname/address to use when communicating with the
server. By default, the interface address through which traffic would normally be routed to the
server is used. For DHCPv6 operation, specifies the name of the network interface through which
exchanges are initiated.
-L local-port
Specifies the local port to use. This must be zero or a positive integer up to 65535. A value of 0
(the default) allows perfdhcp to choose its own port.
-M mac-list-file
Specifies a text file containing a list of MAC addresses, one per line. If provided, a MAC address
will be chosen randomly from this list for every new exchange. In DHCPv6, MAC addresses are used
to generate DUID-LLs. This parameter must not be used in conjunction with the -b parameter.
-N remote-port
Specifies the remote port to use. This must be zero or a positive integer up to 65535. A value of
0 (the default) allows perfdhcp to choose the standard service port.
-o code,hexstring
Forces perfdhcp to insert the specified extra option (or options if used several times) into
packets being transmitted. The code specifies the option code and the hexstring is a hexadecimal
string that defines the content of the option. Care should be taken as perfdhcp does not offer any
kind of logic behind those options; they are simply inserted into packets and sent as is. Be
careful not to duplicate options that are already inserted. For example, to insert client class
identifier (option code 60) with a string 'docsis', use -o 60,646f63736973. The -o may be used
multiple times. It is necessary to specify the protocol family (either -4 or -6) before using -o.
-P preload
Initiates preload exchanges back-to-back at startup. Must be 0 (the default) or a positive
integer.
-r rate
Initiates the rate of DORA/SARR (or if -i is given, DO/SA) exchanges per second. A periodic report
is generated showing the number of exchanges which were not completed, as well as the average
response latency. The program continues until interrupted, at which point a final report is
generated.
-R num-clients
Specifies how many different clients are used. With a value of 1 (the default), all requests seem
to come from the same client. Must be a positive number.
-s seed
Specifies the seed for randomization, making runs of perfdhcp repeatable. This must be 0 or a
positive integer. The value 0 means that a seed is not used; this is the default.
-T template-file
Specifies a file containing the template to use as a stream of hexadecimal digits. This may be
specified up to two times and controls the contents of the packets sent (see the "Templates"
section above).
-v Prints the version of this program.
-W exit-wait-time
Specifies the exit-wait-time parameter, which causes perfdhcp to wait for exit-wait-time after an
exit condition has been met, to receive all packets without sending any new packets. Expressed in
microseconds. If not specified, 0 is used (i.e. exit immediately after exit conditions are met).
-w script_name
Specifies the name of the script to be run before/after perfdhcp. When called, the script is
passed a single parameter, either "start" or "stop", indicating whether it is being called before
or after perfdhcp.
-x diagnostic-selector
Includes extended diagnostics in the output. This is a string of single keywords specifying the
operations for which verbose output is desired. The selector key letters are:
a Prints the decoded command line arguments.
e Prints the exit reason.
i Prints the rate processing details.
s Prints the first server-ID.
t When finished, prints timers of all successful exchanges.
T When finished, prints templates.
DHCPV4-ONLY OPTIONS
The following options only apply for DHCPv4 (i.e. when -4 is given).
-B Forces broadcast handling.
DHCPV6-ONLY OPTIONS
The following options only apply for DHCPv6 (i.e. when -6 is given).
-c Adds a rapid-commit option (exchanges will be SOLICIT-ADVERTISE).
-F release-rate
Specifies the rate at which IPv6 RELEASE requests are sent to a server. This value is only valid
when used in conjunction with the exchange rate (given by -r rate). Furthermore, the sum of this
value and the renew-rate (given by -f rate) must be equal to or less than the exchange rate value.
-A encapsulation-level
Specifies that relayed traffic must be generated. The argument specifies the level of
encapsulation, i.e. how many relay agents are simulated. Currently the only supported
encapsulation-level value is 1, which means that the generated traffic is equivalent to the amount
of traffic passing through a single relay agent.
TEMPLATE-RELATED OPTIONS
The following options may only be used in conjunction with -T and control how perfdhcp modifies the
template. The options may be specified multiple times on the command line; each occurrence affects the
corresponding template file (see "Templates" above).
-E time-offset
Specifies the offset of the secs field (DHCPv4) or elapsed-time option (DHCPv6) in the second
(i.e. REQUEST) template; must be 0 or a positive integer. A value of 0 disables this.
-I ip-offset
Specifies the offset of the IP address (DHCPv4) in the requested-IP option or IA_NA option
(DHCPv6) in the second (REQUEST) template.
-O random-offset
Specifies the offset of the last octet to randomize in the template. This must be an integer
greater than 3. The -T switch must be given to use this option.
-S srvid-offset
Specifies the offset of the server-ID option in the second (REQUEST) template. This must be a
positive integer, and the switch can only be used when the template option (-T) is also given.
-X xid-offset
Specifies the offset of the transaction ID (xid) in the template. This must be a positive integer,
and the switch can only be used when the template option (-T) is also given.
OPTIONS CONTROLLING A TEST
-D max-drop
Aborts the test immediately if max-drop requests have been dropped. Use -D 0 to abort if even a
single request has been dropped. max-drop must be a positive integer. If max-drop includes the
suffix '%', it specifies a maximum percentage of requests that may be dropped before abort. In
this case, testing of the threshold begins after 10 requests have been expected to be received.
-n num-requests
Initiates num-request transactions. No report is generated until all transactions have been
initiated/waited-for, after which a report is generated and the program terminates.
-p test-period
Sends requests for test-period, which is specified in the same manner as -d. This can be used as
an alternative to -n or both options can be given, in which case the testing is completed when
either limit is reached.
-t interval
Sets the delay (in seconds) between two successive reports.
ARGUMENTS
server Indicates the server to test, specified as an IP address. In the DHCPv6 case, the special name
'all' can be used to refer to All_DHCP_Relay_Agents_and_Servers (the multicast address FF02::1:2),
or the special name 'servers' to refer to All_DHCP_Servers (the multicast address FF05::1:3). The
server is mandatory except where the -l option is given to specify an interface, in which case it
defaults to 'all'.
ERRORS
perfdhcp can report the following errors in the packet exchange:
tooshort
A message was received that was too short.
orphans
A message was received which does not match one sent to the server (i.e. it is a duplicate
message, a message that has arrived after an excessive delay, or one that is just not recognized).
locallimit
Local system limits have been reached when sending a message.
EXIT STATUS
perfdhcp can exit with one of the following status codes:
0 Success.
1 General error.
2 Error in command-line arguments.
3 No general failures in operation, but one or more exchanges were unsuccessful.
MAILING LISTS AND SUPPORT
There are two public mailing lists available for the Kea project. kea-users (kea-users at lists.isc.org)
is intended for Kea users, while kea-dev (kea-dev at lists.isc.org) is intended for Kea developers,
prospective contributors, and other advanced users. Both lists are available at https://lists.isc.org.
The community provides best-effort support on both of those lists.
ISC provides professional support for Kea services. See https://www.isc.org/kea/ for details.
HISTORY
The perfdhcp tool was initially coded in October 2011 by John DuBois, Francis Dupont, and Marcin
Siodelski of ISC. Kea 1.0.0, which included perfdhcp, was released in December 2015.
SEE ALSO
kea-dhcp4(8), kea-dhcp6(8), kea-dhcp-ddns(8), kea-ctrl-agent(8), kea-admin(8), kea-netconf(8),
keactrl(8), kea-lfc(8), Kea Administrator Reference Manual.
AUTHOR
Internet Systems Consortium
COPYRIGHT
2020, Internet Systems Consortium
1.6.2 Feb 27, 2020 PERFDHCP(8)