NAME

       gant - console based ANT+ information retrieval client for Garmin GPS products

SYNOPSIS

       gant [ OPTIONS ]

DESCRIPTION

       gant  is  a  small  command-line  utility  to  retrieve information (sports tracks, etc.) from Garmin GPS
       products over the wireless ANT/ANT+ protocols. Currently supported devices are the Forerunner 405.

OPTIONS

       -a authfile
              Provide authfile (default ~/.gant).

       -f name
              Assign a name to the ANT device. (default garmin)

       -d devno
              ttyUSB devno Device no. (default 0)

       -i id  ID for pairing (default random)

       -m mydev
              (default 0)

       -p     Passive

       -v     Verbose

       -D level
              Debug

       -r     Reset the device

       -n     Do not write auth file

       -z     Do not pair

   Help options
       -h     Show command line options.

EXAMPLE 1

       Put 405 in pairing mode gant -f paul -a auth405

       This gives your garmin a name of "paul" and an auth file of "auth405" The 405 will ask you if you wish to
       pair with "paul". Obviously you might want to use a different name :)

       Download with: gant -nza auth405 > output

       or -Dnza if you want lots of debug output

       It  doesn't  seem to be very reliable at starting the download and I haven't investigated why yet. So, if
       it doesn't start downloading press ctrl-c and try again. I find it helps to take the watch out  of  power
       save mode.

       If you've already downloaded the data, then you'll need to set "force send" to yes on the watch.

       Compare output with .TCX file produce by windows ANT Agent.

EXAMPLE 2

            HOWTO USE gant

       1.  plugin  your ANT+ stick 2. the system will load the kernel module "cp210x" 3. to find out what ttyUSB
       device is used run

              # dmesg|grep "cp210x converter"
              [...] cp210x 3-1:1.0: cp210x converter detected
              [...] usb 3-1: cp210x converter now attached to ttyUSB3

       In this case you have to use the optione "-d 3". If it is ttyUSB0 then  you  don't  need  the  -d  option
       because 0 is the default 4. put the watch into paring mode (menu -> configuration -> ANT+ ->
          computer -> pairing on) 5. pair the computer with the watch ("mywatch" as name for the watch and
          the file "auth405" as an authorization file which will be created)

              # gant -d 3 -f mywatch -a auth405

       6. download saved tracks from the watch

              # gant -d 3 -f mywatch -nza auth405

       You get the possible options with

              # gant -h

       To convert the downloaded TCX file (e.g. 2011-07-22-123456.tcx) you can use gpsbabel:

              # gpsbabel -t -i gtrnctr -f 2011-07-22-123456.tcx -o gpx -F 2011-07-22-123456.gpx

       -- 2011-07-22 Noèl Köthe <noel@debian.org>

DEVICES

       Wireless  ANT  communications  happens  over a USB2ANT dongle. Under Linux the dongle is driven by cp210x
       kernel module, and presented to user-space as a USB serial port, /dev/ttyUSBxxx where xxx is an  integer.
       The  dongle  is  typically  carrying  the USB vendor id/product id pair of 0fcf/1004 or 0fcf/1008. Recent
       Linux systems employ udev to handle device nodes and permissions, thus appropriate

FILES

       /lib/modules/`uname -r`/kernel/drivers/usb/serial/cp210x.ko
              Kernel driver module for USB2ANT dongle.

       /dev/ttyUSBxxx
              Serial device created for dongle.

       $HOME/.gant
              Default authentication file.

AUTHOR

       gant was written by paul@ant.sbrk.co.uk, Wali and Klaus@Ethgen.de. This man  page  is  Copyright  ©  2013
       Kristóf Ralovich.

SEE ALSO

       http://code.google.com/p/antpm