Provided by: ccal_4.0-4_amd64 
NAME
ccal - displays a calendar
SYNOPSIS
ccal [ options ] [ [ num_month ] year ]
ccal [ options ] [ word_month ] [ year ]
DESCRIPTION
By default, ccal will display a calendar for the current month with the current day marked. By specifing
certain arguments, ccal will display a calendar for a whole year or a specified month and year.
The transition from the Julian to Gregorian calendar is assumed to have occured in 1752 on the 3rd of
September. Ten days following that date were eliminated by the reformation, so the calendar for that
month is a bit unusual.
If displaying a calendar in the single-month format, ccal will look for a date file. If found, ccal will
read the file, looking for special date descriptions for that month which will be displayed to the right
of the calendar. By default, up to 24 appointments may be displayed per month. If the current date
happens to fall on one of these special dates, it will be flagged by an asterisk. If there is room,
appointments for the next month may also be displayed with some limitations (currently, special dates
such as the 3rd Thursday of will not be calculated for next month).
ccal can also optionally use colors when displaying the calendar. It will not display colors any time
the calendar is not directly displaying on the console. This is generally the desired behavior when your
redirecting cal's output to another program or a file.
ARGUMENTS
A verbally-specified month may be entered without specifying a year in the argument list; however, a
single numerical argument will be interpreted as a year. Only the first 3 characters of the month name
are significant for a verbally-specified month. The command `cal 10' refers to 10 AD, not October, and
not 1910.
The available options are:
--3[months]
Display previous/current/next month together. This option will be ignored when displaying a full
year.
--a[ppts]
Maximum number of appointments to display. Minimum is 8, maximum is 50, default is 24.
--col[or-file]=filename
Read color definitions from `filename' (default color filename depends on operating system).
--con[tinue]=n
Display the next n successive months starting with the month specified.
--d[ata-file]=filename
Read appointments from `filename' (default appointment data filename depends on operating system).
You may use -d up to 8 times in a commandline to specify multiple data file names.
--e[urope]
Use European format (first weekday is Monday).
--a[merican]
Use North American format (first weekday is Sunday), this is the default.
--f[uture]
If current month is displayed, then show only future appointments from the date file, not
appointments that are past. This allows room for other descriptions with future dates to be
displayed. As time progresses through the month, old descriptions are discarded and newer ones
are used. The --future switch affects only the display for the current month, and not other
months.
--j[ulian]
Display Julian dates (days one-based, numbered from January 1).
--m[onday]
Display Monday as the first day of the week (same as --europe)
--noc[olor]
Inhibit the use of colors.
--nod[ata]
Do not try to read any appointment data file.
--p[ause]
Pause before exiting and prompt for a keystroke.
--th[ismonth]
Disable display of next month appointments; show only current month's.
--to[day]
Show only today's appointments.
--u[se-color]
Allow the use of colors.
--y[ear]
Display a calendar for the current year.
There is an optional environment variable that can be used by ccal if found. If CALOPT is set then ccal
will read it and use any valid command line options found. This allows any commonly used switches to be
set in your environment and always used (e.g. --europe). Ccal will produce its usage screen when run if
any invalid options are set in this variable.
COMMAND EXAMPLES
ccal --f --d=my_dates
display the current month and future appointments defined in file `my_dates'
ccal 1996
display the entire year of 1996
ccal 9 1752
display the month of September 1752
ccal sep 1752
same as above
ccal January
display January of the current year
ccal help
help message displayed for unrecognized arguments
DATE FILES
ccal will search for a date file called cal.dat in the directory it was executed from. If not found it
will search in the users $HOME directory for a file called .cal.dat. If still not found, it will look
for a global cal.dat in a system wide directory. To find out where this location is you can run ccal
--help which will display the location.
The special date descriptions specified in the date file are single lines, formatted as follows:
YYYY MM DD NW xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
where
YYYY is the year,
MM is the month (01 - 12),
DD is the day (00 if the NW field is used),
NW is the weekday-of-month code (00 if the DD field is used)
xxxx is the description; it will be truncated as necessary to fit
The data MUST occupy the character fields as shown. If YYYY is specified as -999, the month and day are
assumed to be annual events such as holidays, and the description will be displayed for any year. If MM
is specified as -9, the day is assumed to be a monthly event for the specified year. In the weekday-of-
month code NW, N signifies on which weekday W the special date occurs. For example, 31 indicates the
third sunday. Values of W range from 1 to 7, for Sunday to Saturday, respectively. A value of 9 for N
indicates "last" as in 95 for "last thursday."
If ALL of the fields contain a positive number and the year is at least 1970, then the description is
assumed to be periodic, starting at the given date, with the period in days specified in NW (e.g. 1995 01
06 14 will display the description every 2nd Friday using 6 January 1995 as the base date). The base
date does not get displayed.
You can display birthdays and anniversaries by putting the year of birth (or other special event) inside
brackets or braces, in the description. This number is converted to the number of years since the year
you indicate and the brackets or braces are removed from the output. If braces {} are used the number
will have an ordinal suffix, as in 21st, 32nd, 43rd, 54th, etc. If the number in brackets or braces is
greater than the current year, the number will be displayed unchanged. Example: "Alex's {1961} birthday"
will display as "Alex's 34th birthday" (if the current year is 1995). If you need to include brackets or
braces in your output then you can escape them by prefixing it with a '\'. Example: "Alex's \{1961\}
birthday" will be displayed as "Alex's {1961} birthday".
NOTE: If ccal is invoked with the --europe or --monday switch, then the W values 1-7 denote Monday(1) to
Sunday(7) rather than Sunday(1) to Saturday(7).
A line in cal.dat must start with -999 or a 4-digit number to be considered as data. The data lines may
be in any order. All these appointments will be displayed in chronological order, regardless of the
ordering in the appointment data file.
If ccal was compiled with the reminder support then ccal will also search for the files dates and .dates
in the same places as for the caldat equivalents. The dates file is used by the reminder(1) program and
is an alternate, less-powerful format for specifying descriptions. A file in this format cannot be
specified with the --data-file= option.
The reminder format consists of text lines of length < screen width in the following format:
DDDDDDDD:N:xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx:yyyyyy:S
where
DDDDDDDD
is the date in one of the following formats:
M/D/Y an event occurring on a specific day (year can be two or four digits, but must be two for backward
compatibility with reminder)
M/D an event occurring every year
D an event occurring every month
DDD an event occurring every week (day of the week is 'Sun', 'Mon', etc.)
N is the number of days notice of the event to give the user (ignored by ccal)
xxxxx the event description
yyyyy an optional receptor of the event (e.g. Mr. Jones)
S status flag, either N for normal event or D for a deleted (not displayed) event
Blank lines are ignored. A line otherwise not in the above format is assume to specify a file name from
which to read more events. The file is searched for in the usual places.
LOCALISATION
ccal will also use the user's locale definitions to determine which day to use as the starting weekday.
This is overriden if the -europe or the -american command line switches are used.
If you do not set the -europe or -american switch, your locale is properly defined, and you see a
different start weekday different from what you would expect, either ccal or your libc definitions are to
blame. If you think this is a bug in ccal please report it.
COLOR ATTRIBUTES
ccal will search for a color definition file called cal.col in the directory it was executed from. If
not found it will search in the users $HOME directory for a file called .cal.col. If still not found, it
will look for a global system-wide /etc/cal.col You can confirm the location for the system-wide
definition by running ccal --help which will display it.
Users may override the default colors used when displaying calendars. This may be done by creating a
color definition file in their home directory.
Example of a color definition file:
15 02 video colors for month name
01 03 video colors for weekday header
07 01 video colors for normal calendar days
13 01 video colors for sundays
14 02 video colors for current day
07 06 bkgd for yearly calendar (space between months)
11 00 video colors for special day descriptions
12 08 video colors for * indicating descr.=today
FG BG
Color definitions must appear as above, as a two-character field for the foreground color, followed by a
space, followed by a two-character field for the background color. The color definitions must start on
the first line, and must not contain blank lines. Comments may appear after the second field, provided
that the total line length does not exceed 80 characters.
Possible colors:
black 0
blue 1
green 2
cyan 3
red 4
violet 5
orange 6
light gray 7
dark gray 8
bright blue 9
bright green 10
bright cyan 11
bright red 12
bright violet 13
yellow 14
white 15
Specifying a background color from 8 to 15 will result in a background color of 0 to 7, with flashing
text.
FILES
cal.dat Date file
cal.col Color definition file
$HOME/.cal.dat User's local date file
$HOME/.cal.col User's local color file
/etc/cal.dat System wide definition for dates
/etc/cal.dat System wide definition for colors
~/.dates Date file used with UNIX reminder program and can be used with cal.
AUTHOR
Alex Matulich - alex@unicorn.us.com
...with enhancements and modifications by other
contributors.
(c) 1993-2001 by Unicorn Research Corporation http://unicorn.us.com.
Inspired by an Amiga program by Gary L. Brant.
SEE ALSO
date(1), reminder(1), rs(1)
28 January 2004 CAL(1)