Ubuntu Manpage: CCExtractor - closed captions extractor

Provided by: ccextractor_0.87+ds1-1_amd64

NAME

       CCExtractor - closed captions extractor

SYNOPSIS

       ccextractor   [options]   inputfile1  [inputfile2...]  [-o  outputfilename]  [-o1  outputfilename1]  [-o2
       outputfilename2]

DESCRIPTION

       Extracts closed captions and teletext subtitles from video streams.  DVB, .TS, ReplayTV  4000  and  5000,
       dvr-ms, bttv, Tivo, Dish Network, .mp4, HDHomeRun are known to work.  It can do two things:

       - Save the data to a "raw", unprocessed file which you can later use
         as input for other tools.

       - Generate a subtitles file (.srt,.smi, or .txt) which you can directly
         use with your favourite player.

OPTIONS

File name related options

inputfile: file(s) to process

-o outputfilename

Use -o parameters to define output filename if you don't like the default ones (same as infile
plus _1 or _2 when needed and file extension, e.g. .srt).

-cf filename

Write 'clean' data to a file. Cleans means the ES without TS or PES headers.

-stdout

Write output to stdout (console) instead of file. If stdout is used, then -o, -o1 and -o2 can't be
used. Also -stdout will redirect all messages to stderr (error).

-pesheader

Dump the PES Header to stdout (console). This is used for debugging purposes to see the contents
of each PES packet header.

-debugdvbsub

Write the DVB subtitle debug traces to console.

-ignoreptsjumps

Ignore PTS jumps (default).

-fixptsjumps

fix pts jumps. Use this parameter if you experience timeline resets/jumps in the output.

-stdin

Reads input from stdin (console) instead of file.

You can pass as many input files as you need. They will be processed in order. If a file name is
suffixed by +, ccextractor will try to follow a numerical sequence. For example, DVD001.VOB+ means
DVD001.VOB, DVD002.VOB and so on until there are no more files. Output will be one single file (either
raw or srt). Use this if you made your recording in several cuts (to skip commercials for example) but
you want one subtitle file with contiguous timing.

Output file segmentation

-outinterval x

output in interval of x seconds

--segmentonkeyonly -key

When segmenting files, do it only after a I frame trying to behave like FFmpeg

Network support

-udp port

Read the input via UDP (listening in the specified port) instead of reading a file.

-udp [host:]port

Read the input via UDP (listening in the specified port) instead of reading a file. Host can be a
hostname or IPv4 address. If host is not specified then listens on the local host.

-udp [src@host:]port

Read the input via UDP (listening in the specified port) instead of reading a file. Host and src
can be a hostname or IPv4 address. If host is not specified then listens on the local host.

-sendto host[:port]

Sends data in BIN format to the server according to the CCExtractor's protocol over TCP. For IPv6
use [address]:port

-tcp port

Reads the input data in BIN format according to CCExtractor's protocol, listening specified port
on the local host

-tcppassword password

Sets server password for new connections to tcp server

-tcpdesc description

Sends to the server short description about captions e.g. channel name or file name

Options that affect what will be processed

-1, -2, -12

Output Field 1 data, Field 2 data, or both (DEFAULT is -1)

--append

To prevent overwriting of existing files. The output will be appended instead.

-cc2

When in srt/sami mode, process captions in channel 2 instead of channel 1.

-svc --service N1[cs1],N2[cs2]...

Enable CEA-708 (DTVCC) captions processing for the listed services. The parameter is a comma
delimited list of services numbers, such as "1,2" to process the primary and secondary language
services. Pass "all" to process all services found.

If captions in a service are stored in 16-bit encoding, you can specify what charset or encoding
was used. Pass its name after service number (e.g. "1[EUC-KR],3" or "all[EUC-KR]") and it will
encode specified charset to UTF-8 using iconv. See iconv documentation to check if required
encoding/charset is supported.

In general, if you want English subtitles you don't need to use these options as they are
broadcast in field 1, channel 1. If you want the second language (usually Spanish) you may need to
try -2, or -cc2, or both.

Input formats

With the exception of McPoodle's raw format, which is just the closed caption data with no other info,
CCExtractor can usually detect the input format correctly. To force a specific format:

-in=format

where format is one of these:

ts -> For Transport Streams.

ps -> For Program Streams.

es -> For Elementary Streams.

asf -> ASF container (such as DVR-MS).

wtv -> Windows Television (WTV)

bin -> CCExtractor's own binary format.

raw -> For McPoodle's raw files.

mp4 -> MP4/MOV/M4V and similar.

mkv -> Matroska container and WebM.

-ts, -ps, -es, -mp4, -wtv and -asf (or --dvr-ms) can be used as shorts.

Output formats

-out=format

where format is one of these:

srt -> SubRip (default, so not actually needed).

ass/ssa -> SubStation Alpha.

webvtt -> WebVTT format

webvtt-full -> WebVTT format with styling

sami -> MS Synchronized Accesible Media Interface.

bin -> CC data in CCExtractor's own binary format.

raw -> CC data in McPoodle's Broadcast format.

dvdraw -> CC data in McPoodle's DVD format.

txt -> Transcript (no time codes, no roll-up captions, just the plain transcription.

ttxt -> Timed Transcript (transcription with time info)

smptett -> SMPTE Timed Text (W3C TTML) format.

spupng -> Set of .xml and .png files for use with dvdauthor's spumux. See "Notes on spupng
output format"

null -> Don't produce any file output

report -> Prints to stdout information about captions in specified input. Don't produce any file
output

Options that affect how input files will be processed

-gt --goptime

Use GOP for timing instead of PTS. This only applies to Program or Transport Streams with MPEG2
data and overrides the default PTS timing. GOP timing is always used for Elementary Streams.

-nogt --nogoptime

Never use GOP timing (use PTS), even if ccextractor detects GOP timing is the reasonable choice.

-fp --fixpadding

Fix padding - some cards (or providers, or whatever) seem to send 0000 as CC padding instead of
8080. If you get bad timing, this might solve it.

-90090

Use 90090 (instead of 90000) as MPEG clock frequency. (reported to be needed at least by Panasonic
DMR-ES15 DVD Recorder)

-ve --videoedited

By default, ccextractor will process input files in sequence as if they were all one large file
(i.e. split by a generic, non video-aware tool. If you are processing video hat was split with a
editing tool, use -ve so ccextractor doesn't try to rebuild the original timing.

-s --stream [secs]

Consider the file as a continuous stream that is growing as ccextractor processes it, so don't try
to figure out its size and don't terminate processing when reaching the current end (i.e. wait for
more data to arrive). If the optional parameter secs is present, it means the number of seconds
without any new data after which ccextractor should exit. Use this parameter if you want to
process a live stream but not kill ccextractor externally. Note: If -s is used then only one
input file is allowed.

-poc --usepicorder

Use the pic_order_cnt_lsb in AVC/H.264 data streams to order the CC information. The default way
is to use the PTS information. Use this switch only when needed.

-myth

Force MythTV code branch.

-nomyth

Disable MythTV code branch. The MythTV branch is needed for analog captures where the closed
caption data is stored in the VBI, such as those with bttv cards (Hauppage 250 for example). This
is detected automatically so you don't need to worry about this unless autodetection doesn't work
for you.

-wtvconvertfix

This switch works around a bug in Windows 7's built in software to convert *.wtv to *.dvr-ms. For
analog NTSC recordings the CC information is marked as digital captions. Use this switch only when
needed.

-wtvmpeg2

Read the captions from the MPEG2 video stream rather than the captions stream in WTV files

-pn --program-number

In TS mode, specifically select a program to process. Not needed if the TS only has one. If this
parameter is not specified and CCExtractor detects more than one program in the input, it will
list the programs found and terminate without doing anything, unless -autoprogram (see below) is
used.

-autoprogram

If there's more than one program in the stream, just use the first one we find that contains a
suitable stream.

-datapid

Don't try to find out the stream for caption/teletext data, just use this one instead.

-datastreamtype

Instead of selecting the stream by its PID, select it by its type (pick the stream that has this
type in the PMT)

-streamtype

Assume the data is of this type, don't autodetect. This parameter may be needed if -datapid or
-datastreamtype is used and CCExtractor cannot determine how to process the stream. The value will
usually be 2 (MPEG video) or 6 (MPEG private data).

-haup --hauppauge

If the video was recorder using a Hauppauge card, it might need special processing. This parameter
will force the special treatment.

-mp4vidtrack

In MP4 files the closed caption data can be embedded in the video track or in a dedicated CC
track. If a dedicated track is detected it will be processed instead of the video track. If you
need to force the video track to be processed instead use this option.

-noautotimeref

Some streams come with broadcast date information. When such data is available, CCExtractor will
set its time reference to the received data. Use this parameter if you prefer your own reference.
Note: Current this only affects Teletext in timed transcript with -datets.

--noscte20

Ignore SCTE-20 data if present.

--webvtt-create-css

Create a separate file for CSS instead of inline.

-deblev

Enable debug so the calculated distance for each two strings is displayed. The output includes
both strings, the calculated distance, the maximum allowed distance, and whether the strings are
ultimately considered equivalent or not, i.e. the calculated distance is less or equal than the
max allowed..

-anvid --analyzevideo

Analyze the video stream even if it's not used for subtitles. This allows one to provide video
information.

Levenshtein distance

When processing teletext files CCExtractor tries to correct typos by comparing consecutive lines.
If line N+1 is almost identical to line N except for minor changes (plus next characters) then it
assumes that line N that a typo that was corrected in N+1. This is currently implemented in
teletext because it's where samples files that could benefit from this were available. You can
adjust, or disable, the algorithm settings with the following parameters.

-nolevdist

Don't attempt to correct typos with Levenshtein distance.

-levdistmincnt value

Minimum distance we always allow regardless of the length of the strings.Default 2. This means
that if the calculated distance is 0,1 or 2, we consider the strings to be equivalent.

-levdistmaxpct value

Maximum distance we allow, as a percentage of the shortest string length. Default 10%.0 For
example, consider a comparison of one string of 30 characters and one of 60 characters. We want to
determine whether the first 30 characters of the longer string are more or less the same as the
shortest string, i.e. whether the longest string is the shortest one plus new characters and maybe
some corrections. Since the shortest string is 30 characters and the default percentage is 10%,
we would allow a distance of up to 3 between the first 30 characters.

Options that affect what kind of output will be produced

-chapters (Experimental)

Produces a chapter file from MP4 files. Note that this must only be used with MP4 files, for other
files it will simply generate subtitles file.

-bom

Append a BOM (Byte Order Mark) to output files. Note that most text processing tools in linux
will not like BOM. This is the default in Windows builds.

-nobom

Do not append a BOM (Byte Order Mark) to output files. Note that this may break files when using
Windows. This is the default in non-Windows builds.

-unicode

Encode subtitles in Unicode instead of Latin-1.

-utf8

Encode subtitles in UTF-8 (no longer needed. because UTF-8 is now the default).

-latin1

Encode subtitles in Latin-1

-nofc --nofontcolor

For .srt/.sami/.vtt, don't add font color tags.

--nohtmlescape

For .srt/.sami/.vtt, don't covert html unsafe character

-nots --notypesetting

For .srt/.sami/.vtt, don't add typesetting tags.

-trim

Trim lines.

-dc --defaultcolor

Select a different default color (instead of white). This causes all output in .srt/.smi/.vtt
files to have a font tag, which makes the files larger. Add the color you want in RGB, such as -dc
#FF0000 for red.

-sc --sentencecap

Sentence capitalization. Use if you hate ALL CAPS in subtitles.

-sbs --splitbysentence

Split output text so each frame contains a complete sentence. Timings are adjusted based on number
of characters.

--capfile -caf file

Add the contents of 'file' to the list of words that must be capitalized. For example, if file is
a plain text file that contains

Tony
Alan

Whenever those words are found they will be written exactly as they appear in the file. Use one
line per word. Lines starting with # are considered comments and discarded.

-unixts REF

For timed transcripts that have an absolute date instead of a timestamp relative to the file
start), use this time reference (UNIX timestamp). 0 => Use current system time. ccextractor will
automatically switch to transport stream UTC timestamps when available.

-datets

In transcripts, write time as YYYYMMDDHHMMss,ms.

-sects

In transcripts, write time as ss,ms

-UCLA

Transcripts are generated with a specific format that is convenient for a specific project, feel
free to play with it but be aware that this format is really live - don't rely on its output
format not changing between versions.

-lf

Use LF (UNIX) instead of CRLF (DOS, Windows) as line terminator.

-autodash

Based on position on screen, attempt to determine the different speakers and a dash (-) when each
of them talks (.srt/.vtt only, -trim required).

-xmltv mode

produce an XMLTV file containing the EPG data from the source TS file. Mode: 1 = full output 2 =
live output. 3 = both

-sem

Create a .sem file for each output file that is open and delete it on file close.

-dvbcolor

For DVB subtitles, also output the color of the subtitles, if the output format is SRT or WebVTT.

-nodvbcolor

In DVB subtitles, disable color in output.

-dvblang
For DVB subtitles, select which language's caption stream will be processed. e.g. 'eng' for
English. If there are multiple languages, only this specified language stream will be processed
(default).

-ocrlang

Manually select the name of the Tesseract .traineddata file. Helpful if you want to OCR a caption
stream of one language with the data of another language. e.g. '-dvblang chs -ocrlang chi_tra'
will decode the Chinese (Simplified) caption stream but perform OCR using the Chinese
(Traditional) trained data This option is also helpful when the traineddata file has non standard
names that don't follow ISO specs

-oem

Select the OEM mode for Tesseract, could be 0, 1 or 2. 0: OEM_TESSERACT_ONLY - default value, the
fastest mode. 1: OEM_LSTM_ONLY - use LSTM algorithm for recognition. 2:
OEM_TESSERACT_LSTM_COMBINED - both algorithms.

-mkvlang

For MKV subtitles, select which language's caption stream will be processed. e.g. 'eng' for
English. Language codes can be either the 3 letters bibliographic ISO-639-2 form (like "fre" for
french) or a language code followed by a dash and a country code for specialities in languages
(like "fre-ca" for Canadian French).

-nospupngocr

When processing DVB don't use the OCR to write the text as comments in the XML file.

-font

Specify the full path of the font that is to be used when generating SPUPNG files.

Options that affect how ccextractor reads and writes (buffering)

-bi --bufferinput

Forces input buffering.

-nobi -nobufferinput

Disables input buffering.

-bs --buffersize val

Specify a size for reading, in bytes (suffix with K or or M for kilobytes and megabytes). Default
is 16M.

-koc

keep-output-close. If used then CCExtractor will close the output file after writing each subtitle
frame and attempt to create it again when needed.

-ff --forceflush

Flush the file buffer whenever content is written.

Options that affect the built-in 608 closed caption decoder

-dru

Direct Roll-Up. When in roll-up mode, write character by character instead of line by line. Note
that this produces (much) larger files.

-noru --norollup

If you hate the repeated lines caused by the roll-up emulation, you can have ccextractor write
only one line at a time, getting rid of these repeated lines.

-ru1 / ru2 / ru3

roll-up captions can consist of 2, 3 or 4 visible lines at any time (the number of lines is part
of the transmission). If having 3 or 4 lines annoys you you can use -ru to force the decoder to
always use 1, 2 or 3 lines. Note that 1 line is not a real mode rollup mode, so CCExtractor does
what it can. In -ru1 the start timestamp is actually the timestamp of the first character
received which is possibly more accurate.

Options that affect timing

-delay ms

For srt/sami/webvtt, add this number of milliseconds to all times. For example, -delay 400 makes
subtitles appear 400ms late. You can also use negative numbers to make subs appear early.

Notes on times: -startat and -endat times are used first, then -delay. So if you use -srt -startat 3:00
-endat 5:00 -delay 120000, ccextractor will generate a .srt file, with only data from 3:00 to 5:00 in the
input file(s) and then add that (huge) delay, which would make the final file start at 5:00 and end at
7:00.

Options that affect what segment of the input file(s) to process

-startat time

Only write caption information that starts after the given time. Time can be seconds, MM:SS or
HH:MM:SS. For example, -startat 3:00 means 'start writing from minute 3.

-endat time

Stop processing after the given time (same format as -startat). The -startat and -endat options
are honored in all output formats. In all formats with timing information the times are
unchanged.

-scr --screenfuls num

Write 'num' screenfuls and terminate processing.

Options that affect which codec is to be used have to be searched in input

If codec type is not selected then first elementary stream suitable for subtitle is selected, please
consider -teletext -noteletext override this option.

-codec dvbsub

select the dvb subtitle from all elementary stream, if stream of dvb subtitle type is not found
then nothing is selected and no subtitle is generated

-nocodec dvbsub

ignore dvb subtitle and follow default behaviour

-codec teletext

select the teletext subtitle from elementary stream

-nocodec teletext

ignore teletext subtitle

NOTE: option given in form -foo=bar ,-foo = bar and --foo=bar are invalid. Valid option are only
in form -foo bar. nocodec and codec parameter must not be same. If found to be same then
parameter of nocodec is ignored, this flag should be passed once, more then one are not supported
yet and last parameter would taken in consideration

Adding start and end credits

CCExtractor can _try_ to add a custom message (for credits for example) at the start and end of the file,
looking for a window where there are no captions. If there is no such window, then no text will be added.
The start window must be between the times given and must have enough time to display the message for at
least the specified time.

--startcreditstext txt

Write this text as start credits. If there are several lines, separate them with the characters
\n, for example Line1\nLine 2.

--startcreditsnotbefore time

Don't display the start credits before this time (S, or MM:SS). Default: 0

--startcreditsnotafter time

Don't display the start credits after this time (S, or MM:SS). Default: 5:00

--startcreditsforatleast time

Start credits need to be displayed for at least this time (S, or MM:SS). Default: 2

--startcreditsforatmost time

Start credits should be displayed for at most this time (S, or MM:SS). Default: 5

--endcreditstext txt

Write this text as end credits. If there are several lines, separate them with the characters \n,
for example Line1\nLine 2.

--endcreditsforatleast time

End credits need to be displayed for at least this time (S, or MM:SS). Default: 2

--endcreditsforatmost time

End credits should be displayed for at most this time (S, or MM:SS). Default: 5

Options that affect debug data

-debug

Show lots of debugging output.

-608

Print debug traces from the EIA-608 decoder. If you need to submit a bug report, please send the
output from this option.

-708

Print debug information from the (currently in development) EIA-708 (DTV) decoder.

-goppts

Enable lots of time stamp output.

-xdsdebug

Enable XDS debug data (lots of it).

-vides

Print debug info about the analysed elementary video stream.

-cbraw

Print debug trace with the raw 608/708 data with time stamps.

-nosync

Disable the syncing code. Only useful for debugging purposes.

-fullbin

Disable the removal of trailing padding blocks when exporting to bin format. Only useful for for
debugging purposes.

-parsedebug

Print debug info about the parsed container file. (Only for TS/ASF files at the moment.)

-parsePAT

Print Program Association Table dump.

-parsePMT

Print Program Map Table dump.

-dumpdef

Hex-dump defective TS packets.

-investigate_packets

If no CC packets are detected based on the PMT, try to find data in all packets by scanning.

Teletext related options

-tpage page

Use this page for subtitles (if this parameter is not used, try to autodetect). In Spain the page
is always 888, may vary in other countries.

-tverbose

Enable verbose mode in the teletext decoder.

-teletext

Force teletext mode even if teletext is not detected. If used, you should also pass -datapid to
specify the stream ID you want to process.

-noteletext

Disable teletext processing. This might be needed for video streams that have both teletext
packets and CEA-608/708 packets (if teletext is processed then CEA-608/708 processing is
disabled).

Transcript customizing options

-customtxt format

Use the passed format to customize the (Timed) Transcript output. The format must be like this:
1100100 (7 digits). These indicate whether the next things should be displayed or not in the
(timed) transcript. They represent (in order):

— Display start time

— Display end time

— Display caption mode

— Display caption channel

— Use a relative timestamp ( relative to the sample)

— Display XDS info

— Use colors

Examples:

0000101 is the default setting for transcripts
1110101 is the default for timed transcripts
1111001 is the default setting for -ucla

Make sure you use this parameter after others that might affect these settings (-out, -ucla, -xds,
-txt, -ttxt ...)

Communication with other programs and console output

--gui_mode_reports

Report progress and interesting events to stderr in a easy to parse format. This is intended to be
used by other programs. See docs directory for details.

--no_progress_bar

Suppress the output of the progress bar

-quiet

Don't write any message.

Notes on the CEA-708 decoder: While it is starting to be useful, it's a work in progress. A number of
things don't work yet in the decoder itself, and many of the auxiliary tools (case conversion to name
one) won't do anything yet. Feel free to submit samples that cause problems and feature requests.

Notes on spupng output format: One .xml file is created per output field. A set of .png files are created
in a directory with the same base name as the corresponding .xml file(s), but with a .d extension. Each
.png file will contain an image representing one caption and named subNNNN.png, starting with
sub0000.png.

For example, the command:

ccextractor -out=spupng input.mpg

will create the files:

input.xml
input.d/sub0000.png
input.d/sub0001.png
...

The command:

ccextractor -out=spupng -o /tmp/output -12 input.mpg

will create the files:

/tmp/output_1.xml
/tmp/output_1.d/sub0000.png
/tmp/output_1.d/sub0001.png
...
/tmp/output_2.xml
/tmp/output_2.d/sub0000.png
/tmp/output_2.d/sub0001.png
...

Burned-in subtitle extraction

-hardsubx

Enable the burned-in subtitle extraction subsystem.
NOTE: The following options will work only if -hardsubx is specified before them:-

-ocr_mode

Set the OCR mode to either frame-wise, word-wise or letter wise.
e.g. -ocr_mode frame (default), -ocr_mode word, -ocr_mode letter

-subcolor

Specify the color of the subtitles
Possible values are in the set {white,yellow,green,cyan,blue,magenta,red}.
Alternatively, a custom hue value between 1 and 360 may also be specified.
e.g. -subcolor white or -subcolor 270 (for violet).
Refer to an HSV color chart for values.

-min_sub_duration

Specify the minimum duration that a subtitle line must exist on the screen.
The value is specified in seconds.
A lower value gives better results, but takes more processing time.
The recommended value is 0.5 (default).
e.g. -min_sub_duration 1.0 (for a duration of 1 second)

-detect_italics

Specify whether italics are to be detected from the OCR text.
Italic detection automatically enforces the OCR mode to be word-wise

-conf_thresh

Specify the classifier confidence threshold between 1 and 100.
Try and use a threshold which works for you if you get a lot of garbage text.
e.g. -conf_thresh 50

-whiteness_thresh

For white subtitles only, specify the luminance threshold between 1 and 100.
This threshold is content dependent, and adjusting values may give you better results
Recommended values are in the range 80 to 100.
The default value is 95

An example command for burned-in subtitle extraction is as follows:

ccextractor video.mp4 -hardsubx -subcolor white -detect_italics -whiteness_thresh 90 -conf_thresh
60

--version

Display current CCExtractor version and detailed information.

NAME

SYNOPSIS

DESCRIPTION

OPTIONS

SEE ALSO