Ubuntu Manpage: dcut - Debian command upload tool for the archive upload queue

NAME

       dcut - Debian command upload tool for the archive upload queue

SYNOPSIS

       dcut [-Pds] [-c CONFIGFILE] [-k KEYID] [-m MAINTAINER] [-O COMMANDFILE] [ [--host] HOSTNAME] COMMAND [,
            COMMAND] ...

       dcut [-Pds] [-c CONFIGFILE] [-k KEYID] [-m MAINTAINER] [-O COMMANDFILE] [ [--host] HOSTNAME] -i
            CHANGESFILE

       dcut [-Pds] [-c CONFIGFILE] [ [--host] HOSTNAME] -U COMMANDFILE

       dcut -h

       dcut -v

DESCRIPTION

dcut creates and / or uploads Debian queue commands files for a Debian repository upload queue. It is a
companion for dput(1) and uses dput configuration files (see FILES, below).

The normal workflow is:

• Determine the queue control commands.

• Compose the batch of commands to upload.

• Determine the hostname of the queue host.

• Upload the commands to the queue host.

Determine queue control commands
In the default command-line syntax, parse each command-line argument COMMAND, in the format needed by a
Debian archive queue manager. Multiple queue commands must be separated by a comma (,) as a separate
word between each command.

See COMMANDS below for valid queue commands.

When the CHANGESFILE parameter is specified, instead parse that file and compose a rm command for each
file specified in CHANGESFILE.

If the --upload (-U) option is specified, instead read the queue control commands from the file
COMMANDFILE.

Compose the batch of commands
The Uploader field in the batch is set to the package maintainer specification MAINTAINER. If not
specified, the value of MAINTAINER is derived from environment variables (see ENVIRONMENT, below).

The Commands field in the batch is set to the sequence of queue control commands determined.

If the --output (-O) option is specified, write the batch to the file named by its COMMANDFILE argument.
Otherwise, write the batch to a temporary file and remove it after upload.

After writing the batch of commands to a file, sign the file with debsign(1). The MAINTAINER and KEYID
parameters, if specified, are passed to the debsign command.

If the --upload (-U) option is specified, do not compose the batch of commands; instead use the content
of its COMMANDFILE argument as the name of the command file to upload to the queue host.

Determine the queue host
The HOSTNAME must match one of the named hosts in the configuration (see dput.cf(5)). The value is
determined as follows:

• If the --host option is specified, use that option's HOSTNAME argument.

• If the first non-option argument is not a valid queue command, that is interpreted as the
HOSTNAME.

• Otherwise, HOSTNAME defaults to the value of the default_host_main configuration parameter.

Upload queue commands
Upload the composed batch of queue commands to the queue host HOSTNAME, using the parameters in the
dput.cf(5) configuration for that host.

If the --output (-O) option is specified, do not upload the commands to the queue host. Instead, leave
the composed file COMMANDFILE on the filesystem.

COMMANDS

       Presently supported commands are:

       rm     Remove  files  from  the  UploadQueue  directories.   dcut  generates  commands  that  search  the
              subdirectories  automatically,  but you can also specify --nosearchdirs and then target individual
              UploadQueue directories, i.e. either filenames without path for regular incoming or  DELAYED/DAYS-
              day/filename.  Wildcards are accepted.

       reschedule CHANGESFILE DAYS-day
              Move an upload from any DEFERRED queue to DAYS-day (use 0-day for immediate processing).

       cancel CHANGESFILE
              Cancels an upload from DEFERRED.

       Both  reschedule  and  cancel  take  a complete basename of a changes file as argument and operate on the
       whole upload, they process the changes and all files mentioned by it.

       The    authoritative    documentation    for    the    commands    interface    can    be    found     at
       ftp://ftp.upload.debian.org/pub/UploadQueue/README.

OPTIONS

-c CONFIGFILE
--config CONFIGFILE
Use the file CONFIGFILE for configuration. See dput.cf(5) for the specification of this file
format.

-d
--debug
Display debugging messages.

-h
--help Display help information, then exit.

--host HOSTNAME
Specify the HOSTNAME unambiguously. This allows naming a host that may be ambiguous with a queue
command.

-m MAINTAINER
--maintainer MAINTAINER
Use MAINTAINER for the Uploader field and GnuPG key selection. This has no effect when --upload
is used.

-k KEYID
--keyid KEYID
Specify the GnuPG key id KEYID to pass to the debsign(1) command. This has no effect when
--upload is used.

-O COMMANDFILE
--output COMMANDFILE
Write commands file to COMMANDFILE instead of uploading. You should not specify a HOSTNAME when
using this option. Also, this option should not be used with --upload.

-P
--passive
Use passive mode for FTP. If not specified, default for FTP is active mode.

-s
--simulate
Do not actually upload to the queue host.

-U COMMANDFILE
--upload COMMANDFILE
Instead of composing a new queue command file, upload the existing file COMMANDFILE. Note: No
checks (syntax or presence/validity of signature) are currently performed.

-i CHANGESFILE
--input CHANGESFILE
Do not parse queue commands from the command line. Instead, read the package changes file
CHANGESFILE and compose a rm command for each file specified in CHANGESFILE. This has no effect
when --upload is used.

-v
--version
Display version information, then exit.

ENVIRONMENT

       DEBEMAIL
       EMAIL  If  MAINTAINER  is  not specified, use the first of these which has a value to determine the email
              address portion of MAINTAINER.

       DEBFULLNAME
              If MAINTAINER is not specified, use this value to determine the full name portion of MAINTAINER.

       USER   If no username is specified for authenticating to the remote host, use the value of this variable.

FILES

       Configuration
              See dput.cf(5) for the files to configure dcut.

EXAMPLES

       To upload a GPG signed commands file that removes dput_0.9.2.33_all.deb file from the  queue,  one  would
       have to do:

       $ dcut rm dput_0.9.2.33_all.deb

       This creates and uploads a commands file that looks like the following:

       -----BEGIN PGP SIGNED MESSAGE-----
       Hash: SHA1

       Uploader: Foo Bar <foo@bar.org>
       Commands:
        rm dput_0.9.2.33_all.deb

       -----BEGIN PGP SIGNATURE-----
       Version: GnuPG v1.4.9 (GNU/Linux)

       iEYEARECAAYKAkisYx0ACgkQ4eu+pS04mIfwLQCg85XVpae/LHLrbvzywcQNt9PS
       ztsAoMgw6HjcI9flfmwjgMiapcu379Pu
       =fjp0

       -----END PGP SIGNATURE-----
       To  upload a GPG signed commands file that removes files named in dput_0.9.4_i386.changes from the queue,
       one would have to do:

       $ dcut --input dput_0.9.4_i386.changes

       This creates and uploads a commands file that looks like the following:

       -----BEGIN PGP SIGNED MESSAGE-----
       Hash: SHA1

       Uploader: Foo Bar <foo@bar.org>
       Commands:
        rm --searchdirs dput_0.9.4.dsc
        rm --searchdirs dput_0.9.4.tar.gz
        rm --searchdirs dput_0.9.4_all.deb

       -----BEGIN PGP SIGNATURE-----
       Version: GnuPG v1.4.9 (GNU/Linux)

       iEYEARECAAYKAkisYx0ACgkQ4eu+pS04mIfwLQCg85XVpae/LHLrbvzywcQNt9PS
       ztsAoMgw6HjcI9flfmwjgMiapcu379Pu
       =fjp0

       -----END PGP SIGNATURE-----
       If you've uploaded packages with the --delayed option (uploaded to DEFERRED queue), then use  the  cancel
       command with a .changes file:

       $ dcut cancel dput_0.9.4_i386.changes

       This creates and uploads a commands file just like the other commands.