Ubuntu Manpage: i.rectify - Rectifies an image by computing a coordinate transformation for each pixel in the image

Provided by: grass-doc_7.8.2-1build3_all

NAME

       i.rectify   -  Rectifies  an  image  by computing a coordinate transformation for each pixel in the image
       based on the control points.

KEYWORDS

       imagery, rectify

SYNOPSIS

       i.rectify
       i.rectify --help
       i.rectify [-cat] group=name  [input=name[,name,...]]  extension=string order=integer   [resolution=float]
       [memory=memory in MB]   [method=string]   [--help]  [--verbose]  [--quiet]  [--ui]

   Flags:
       -c
           Use current region settings in target location (def.=calculate smallest area)

       -a
           Rectify all raster maps in group

       -t
           Use thin plate spline

       --help
           Print usage summary

       --verbose
           Verbose module output

       --quiet
           Quiet module output

       --ui
           Force launching GUI dialog

   Parameters:
       group=name [required]
           Name of input imagery group

       input=name[,name,...]
           Name of input raster map(s)

       extension=string [required]
           Output raster map(s) suffix

       order=integer [required]
           Rectification polynomial order (1-3)
           Options: 1-3
           Default: 1

       resolution=float
           Target resolution (ignored if -c flag used)

       memory=memory in MB
           Amount of memory to use in MB
           Default: 300

       method=string
           Interpolation method to use
           Options: nearest, linear, cubic, lanczos, linear_f, cubic_f, lanczos_f
           Default: nearest

DESCRIPTION

i.rectify uses the control points included in the source data or identified with the Ground Control
Points Manager to calculate a transformation matrix and then converts x,y cell coordinates to standard
map coordinates for each pixel in the image. The result is a planimetric image with a transformed
coordinate system (i.e., a different coordinate system than before it was rectified). Supported
transformation methods are first, second, and third order polynomial and thin plate spline. Thin plate
spline is recommended for ungeoreferenced satellite imagery where ground control points (GCPs) are
included. Examples are NOAA/AVHRR and ENVISAT imagery which include throusands of GCPs.

If no ground control points are available, the Ground Control Points Manager must be run before
i.rectify. An image must be georeferences before it can reside in a standard coordinate LOCATION, and
therefore be analyzed with the other map layers in the standard coordinate LOCATION. Upon completion of
i.rectify, the rectified image is deposited in the target standard coordinate LOCATION. This LOCATION is
selected using i.target.

More than one raster map may be rectified at a time. Each cell file should be given a unique output file
name. The rectified image or rectified raster maps will be located in the target LOCATION when the
program is completed. The original unrectified files are not modified or removed.

If the -c flag is used, i.rectify will only rectify that portion of the image or raster map that occurs
within the chosen window region in the target location, and only that portion of the cell file will be
relocated in the target database. It is important therefore, to check the current mapset window in the
target LOCATION if the -c flag is used.

If you are rectifying a file with plans to patch it to another file using the GRASS program r.patch,
choose option number one, the current window in the target location. This window, however, must be the
default window for the target LOCATION. When a file being rectified is smaller than the default window in
which it is being rectified, NULLs are added to the rectified file. Patching files of the same size that
contain NULL data, eliminates the possibility of a no-data line in the patched result. This is because,
when the images are patched, the NULLs in the image are "covered" with non-NULL pixel values. When
rectifying files that are going to be patched, rectify all of the files using the same default window.

Coordinate transformation
The desired order of transformation (1, 2, or 3) is selected with the order option. The program will
calculate the RMSE and check the required number of points.

Linear affine transformation (1st order transformation)
x’ = ax + by + c
y’ = Ax + By + C The a,b,c,A,B,C are determined by least squares regression based on the control points
entered. This transformation applies scaling, translation and rotation. It is NOT a general purpose
rubber-sheeting like TPS, nor is it ortho-photo rectification using a DEM, not second order polynomial,
etc. It can be used if (1) you have geometrically correct images, and (2) the terrain or camera
distortion effect can be ignored.

Polynomial Transformation Matrix (2nd, 3d order transformation)
i.rectify uses a first, second, or third order transformation matrix to calculate the registration
coefficients. The number of control points required for a selected order of transformation (represented
by n) is
((n + 1) * (n + 2) / 2) or 3, 6, and 10 respectively. It is strongly recommended that one or more
additional points be identified to allow for an overly-determined transformation calculation which will
generate the Root Mean Square (RMS) error values for each included point. The RMS error values for all
the included control points are immediately recalculated when the user selects a different transformation
order from the menu bar. The polynomial equations are performed using a modified Gaussian elimination
method.

Thin plate spline (TPS) transformation
TPS transformation is selected with the -t flag. This method of coordinate transformation is recommended
for satellite imagery where hundreds or thousands of GCPs are included, and for historical printed or
scanned maps with unknown georeferencing and/or known localized distortions.

TPS combines a linear affine transformation with individual transformation coefficients for each GCP,
using the radial basis kernel function with the distance dist between any two points:
dist2 * log(dist) As a consequence, localized distortions can be removed with TPS transformation. For
example, scan line sensors will have due to the changing viewing angle larger distortions towards the end
points of the scan line than at the center of the scan line. Even higher order polynomial transformations
are not able to remove these locally different distortions, but TPS transformation can. For best results,
TPS requires an even and, for localized distortions, dense spacing of GCPs.

Resampling method
The rectified data is resampled with one of seven different methods: nearest, bilinear, cubic, lanczos,
bilinear_f, cubic_f, or lanczos_f.

The method=nearest method, which performs a nearest neighbor assignment, is the fastest of the resampling
methods. It is primarily used for categorical data such as a land use classification, since it will not
change the values of the data cells. The method=bilinear method determines the new value of the cell
based on a weighted distance average of the 4 surrounding cells in the input map. The method=cubic method
determines the new value of the cell based on a weighted distance average of the 16 surrounding cells in
the input map. The method=lanczos method determines the new value of the cell based on a weighted
distance average of the 25 surrounding cells in the input map.

The bilinear, cubic and lanczos interpolation methods are most appropriate for continuous data and cause
some smoothing. These options should not be used with categorical data, since the cell values will be
altered.

In the bilinear, cubic and lanczos methods, if any of the surrounding cells used to interpolate the new
cell value are NULL, the resulting cell will be NULL, even if the nearest cell is not NULL. This will
cause some thinning along NULL borders, such as the coasts of land areas in a DEM. The bilinear_f,
cubic_f and lanczos_f interpolation methods can be used if thinning along NULL edges is not desired.
These methods "fall back" to simpler interpolation methods along NULL borders. That is, from lanczos to
cubic to bilinear to nearest.

If nearest neighbor assignment is used, the output map has the same raster format as the input map. If
any of the other interpolations is used, the output map is written as floating point.

NOTES

       If i.rectify starts normally but after some time the following text is seen:
       ERROR: Error writing segment file
       the user may try the -c flag or the module needs more free space on the hard drive.

AUTHORS

       William R. Enslin, Michigan State University, Center for Remote Sensing

       Modified for GRASS 5.0 by:
       Luca Palmeri (palmeri@ux1.unipd.it)
       Bill Hughes
       Pierre de Mouveaux (pmx@audiovu.com)
       CMD mode by Bob Covill

SOURCE CODE

       Available at: i.rectify source code (history)

       Main index | Imagery index | Topics index | Keywords index | Graphical index | Full index

       © 2003-2019 GRASS Development Team, GRASS GIS 7.8.2 Reference Manual