NAME

       ipmctl-show-error-log - Shows thermal or media errors on the specified DCPMMs

SYNOPSIS

       ipmctl show [OPTIONS] -error (Thermal|Media) [TARGETS] [PROPERTIES]

DESCRIPTION

       Shows thermal or media errors on the specified DCPMMs.

OPTIONS

       -a, -all
           Shows all attributes.

       -h, -help
           Displays help for the command.

       -ddrt
           Used to specify DDRT as the desired transport protocol for the current invocation of ipmctl.

       -smbus
           Used to specify SMBUS as the desired transport protocol for the current invocation of ipmctl.

           Note

           The -ddrt and -smbus options are mutually exclusive and may not be used together.

       -lpmb
           Used to specify large transport payload size for the current invocation of ipmctl.

       -spmb
           Used to specify small transport payload size for the current invocation of ipmctl.

           Note

           The -lpmb and -spmb options are mutually exclusive and may not be used together.

       -o (text|nvmxml), -output (text|nvmxml)
           Changes the output format. One of: "text" (default) or "nvmxml".

TARGETS

       -dimm [DimmIDs]
           Filter output to specific DCPMMs by optionally supplying one or more comma-separated DCPMM
           identifiers. The default is to include all manageable DCPMMs.

PROPERTIES

       SequenceNumber
           Error log entries are stored with a sequence number starting with 1 and rolling over back to 1 after
           65535. Limit the error log entries returned by providing a sequence number. Only errors with a
           sequence number equal to or higher than provided will be returned. The default is 1.

       Level
           Severity level of errors to be fetched. One of:

           •   "High": High severity errors (Default)

           •   "Low": Low severity errors

       Count
           Max number of error entries to be fetched and printed. The default is 8 for media errors and 16 for
           thermal errors.

EXAMPLES

       Show all high thermal error log entries

       ipmctl show -error Thermal Level=High

       Show all low media error log entries

       ipmctl show -error Media Level=Low

LIMITATIONS

       To successfully execute this command, the specified DCPMM(s) must be manageable by the host software. In
       addition, for DCPMMs with firmware version 2.3 and above, errors due to AIT operations are no longer
       exposed.

RETURN DATA

       Prints errors of the specified type for the specified DCPMMs. If no errors are found, the following
       message will be printed:

       No errors found on DIMM (DimmID)

SAMPLE OUTPUT

        DimmID | System Timestamp    | Error Type
       =============================================================
        0x0001 | 01/01/1970 00:00:20 | 0x04 - Locked/Illegal Access
        0x0001 | 01/01/1970 00:00:21 | 0x04 - Locked/Illegal Access
       Show error executed successfully

       Media Error occurred on Dimm (DimmID):
       System Timestamp : 1527266471
       DPA : 0x000014c0
       PDA : 0x00000600
       Range : 4B
       Error Type : 4 - Locked/Illegal Access
       Error Flags : DPA Valid
       Transaction Type : 11 - CSR Write
       Sequence Number : 2

ipmctl                                             2020-02-10                           IPMCTL-SHOW-ERROR-LOG(1)