Provided by: linklint_2.3.5-5.1_all 
NAME
Linklint - fast link checker and website maintenance tool
SYNOPSIS
linklint [-cache directory] [-case] [-checksum] [-concise_url] [-db1..9] [-delay d] [-doc] [-docbase
base] [-dont_output xxxx] [-error] [-flush] [-forward] [-help] [-help_all] [-host hostname:port] [-host
hostname] [-htmlonly] [-http] [-http_header name:value] [-ignore ignoreset] [-index file] [-language zz]
[-limit n] [-list] [-local linkset] [-map /a=[/b]] [-net] [-netmod] [-netset] [-no_anchors]
[-no_query_string] [-no_warn_index] [-orphan] [-out file] [-output_frames] [-output_index filename]
[-password realm user:password] [-proxy hostname[:port]] [-quiet] [-redirect] [-retry] [-silent] [-skip
skipset] [-textonly] [-timeout t] [-url_doc_prefix url/] [-version] [-warn] [-xref] linkset
VERSION
2.3.5 August 13, 2001
DESCRIPTION
This manual page documents briefly the Linklint program, which is an Open Source Perl program that checks
local and remote HTML links.
This manual page was written for the Debian distribution because the original program does not have a
manual page. Instead, it has documentation in the HTML format; see below.
OPTIONS
Input File Selection
Whether you are doing a local site check or an HTTP site check, you specify which directories (presumably
containing HTML files) to check with one or more linksets. A linkset uses two wildcard characters @ and
#. Each linkset specifies one or more directories much like the standard * and ? wildcard characters are
used to specify the characters in the * names of files in one directory.
The @ character matches any string of characters (this kind of acts like "*"), and the # character (which
is kind of like "?") matches any string of characters except "/" . The best way to understand how @ and #
work is to look at a few examples:
the entire site /@
the homepage only (default) /
files in the root directory only /#
. . . and one directory down /#/#
files in the sub directory only /sub/#
files in the sub directory and below /sub/@
specific files /file1 /file2 ...
specific subdirectories /sub1/@ /sub2/@ ...
If you specify more than one linkset, files matching any of the linksets will be checked. HTML files that
don't match any of the linksets will be skipped. Linklint will see if they exist but won't check any of
their links.
Other File Selection Options
-skip skipset
Skips HTML files that match skipset. "Linklint" will make sure these files exist but won't add any
of their links to the list of files to check. Multiple skipsets are allowed, but each must be
preceded with -skip on the command line. Skipsets use the same wildcard characters as linksets.
-ignore ignoreset
Ignores files matching ignoreset. "Linklint" doesn't even check to see if these files exist.
Multiple ignoresets are allowed, but each must be preceded with -ignore on the command line.
Ignoresets use the same wildcard characters as linksets.
-limit n
Limits checking to n HTML files (default 500). All HTML files after the first n are skipped.
Local Site Checking
If you are developing HTML pages on a computer that does not have an http server, or if you are
developing a simple site that does not use Server Redirection or extensive CGI, you should use local site
checking.
linklint /@
Checks all HTML files in the current directory and below. Assumes that the current directory is the
server root directory so links starting with "/" default to this directory. You must specify /@ to check
the entire site. See Which Files to Check for details.
linklint -root dir /@
Checks all HTML files in dir and below. This is useful if you want to check several sites on the same
machine or if you don't want to run Linklint in your public HTML directory.
Other Local Site Options
-host hostname
By default "Linklint" assumes all links on your site that start with "http://" are remote links to
other sites. If you have absolute links to your own site, give "Linklint" your hostname and links
starting with "http://hostname" will be treated as local files. If you specify -host hostname:port,
only http links to this hostname and port will be treated as local files.
-case
Makes sure that the filename (upper/lower) case used links inside of html tags matches the case used
by the file system. This is for Windows only and is very handy if you are porting a site to a Unix
host.
-orphan
Checks all directories that contain files used on the site for unused (orphan) files.
-index file
Uses file as the default index file instead of the default list used by "Linklint". You can specify
more than one file but each one must be preceded by -index on the command line. If a default index
file is not found, "Linklint" uses a listing of the entire directory. See the Default File section
for details.
-map /a=[/b]
Substitutes leading /a with /b. For server-side image maps or to simulate Server Redirection.
-no_warn_index
Turns of the "index file not found" warning. Applies to local site checking only.
-no_anchors
Tells "Linklint" to ignore named anchors. This could ease memory problems for people with large
sites who are primarily interested in missing pages and not missing named anchors. This option works
for both HTTP and local site checks.
HTTP Site Checking
If you have a complicated site that uses lots of CGI or Server Redirection, you should use HTTP site
checking. Even though an HTTP site check reads pages via your HTTP server, you will get the best
performance if you do your checking on a machine that has a high speed connection to your server.
linklint -http -host www.site.com /@
The -http flag tells "Linklint" to check HTML files on the site www.site.com via a remote http
connection. You must specify a -host whenever you do an HTTP site check (otherwise Linklint won't where
to get your pages). You can specify /@ to check the entire site. See Which Files to Check for details.
HTTP Site Check Options
-http
This flag tells Linklint to perform an HTTP site check instead of a local site check. All files
(except server side image maps) will be read via the HTTP protocol from your web server.
-host hostname:port
If you include :port at the end of your hostname, Linklint uses this port for the HTTP site check.
-password realm user:password
Uses user and password as authorization to enter password protected realm. Realms are named areas of
a site that share a common set of usernames and passwords. If passwords are needed to check your
site, Linklint will tell you which realms need passwords in warning messages. Enclose the realm in
double quotes if it contains spaces. If no password is given for a specific realm, Linklint will try
using the password for the ""DEFAULT"" realm if it was provided.
-timeout t
Times out after t seconds (default 15) when getting files via http. Once data is received, an
additional t seconds is allowed. The timeout is disabled on Windows machines since the Windows port
of Perl does not support the "alarm()" function.
-delay d
Delays d seconds between requests to the same host (default 0). This is a friendly thing to do
especially if you are checking many links on the same host.
-local linkset
Gets files that match linkset locally. The default -local linkset is @.map (which matches any link
ending in .map). This allows Linklint to follow links through server-side image maps. The default
is ignored if you specify your own -local expressions. You need to specify the -root directory for
this option to work propery.
-map /a=[/b]
Substitutes leading /a with /b. For server-side image maps or to simulate Server Redirection.
-no_anchors
Tells "Linklint" to ignore named anchors.
-no_query_string
Up until version 2.3.4, Linklint did not use query strings while doing HTTP site checks. Query
strings were removed before making HTTP requests. As of 2.3.4 query strings in links are used in the
requests. Use the -no_query_string flag to get back the "old" behavior.
-http_header Name:value
Adds the HTTP header Name: value to all HTTP requests generated by Linklint. You will need to use
quotation marks to hide spaces in the header line from the command line interpreter. Linklint will
automatically add a space after the first colon if there is not one there already. Multiple (unique)
header lines are allowed.
-language zz
This option is only useful if you are checking a site that uses content negotiation to present the
same URL in different languages.
Creates an HTTP Request header of the form Accept-Language: zz that is included as part of all HTTP
requests generated by Linklint. Multiple -language specifications are allowed. This will result in
a single Accept-Language: header that lists all of the languages you have specified in alphabetical
order. Some web sites can use this information to return pages to you in a specific language.
If you need to get more complicated than this, use the more general purpose -http_header to create
your own header. There is a partial list of language abbreviations (taken from Debian) included as
part of the Linklint documentation.
Remote URL Checking
A remote URL check is used to see if a remote URL exists (or has been recently modified). Links in the
remote pages are not checked nor does Linklint look for named anchors in remote URLs.
Remote URL checking can be used to check all of the "remote" links on your site (those that link to pages
on other sites) or it can check a list of URLs. There are several ways to specify which remote URLs to
check:
linklint http://somehost/file.html
Checks to see if /file.html exists on somehost. Multiple URLs can be entered on the command line, in an
@commandfile, or in an @@httpfile. Every URL to be checked must begin with "http://". This will disable
site checking.
linklint @@httpfile
Checks all the remote http URLs found in httpfile. Anything in the file starting with "http://" is
considered to be a URL. If the file looks like a remoteX.txt file generated by Linklint then all failed
URLs will be cross referenced.
linklint @@ -doc linkdoc
Assuming you have already done a site check and used -doc linkdoc to put all of your output files in the
linkdoc directory, Linklint will check all the remote links that were found on your site and cross
reference all failed URLs without doing a site check. You can use the -netmod or -netset flags to enable
the status-cache.
linklint -net [site check options]
The -net flag tells Linklint to check all remote links after doing either a local or HTTP site check
site. If you are having memory problems, don't use the -net option, instead use one of the @@ options
above.
Other Remote URL Options
-timeout t
Times out after t seconds (default 15) when getting files via http. Once data is received, an
additional t seconds is allowed. The timeout is disabled on Windows machines since the Windows port
of Perl does not support the "alarm()" function.
-delay d
Delays d seconds between requests to the same host (default 0). This is a friendly thing to do
especially if you are checking many links on the same host.
-redirect
Checks for <meta> redirects in the headers of remote URLs that are html files. If a redirect is
found it is followed. This feature is disabled if the status cache is used.
-proxy hostname[:port]
Sends all remote HTTP requests through the proxy server hostname and the optional port. This allows
you to check remote URLs or (new with version 2.3.1) your entire site from within a firewall that has
an http proxy server. Some error messages (relating to host errors) may not be available through a
proxy server.
-concise_url
Turns off printing successful URLs to STDOUT during remote link checking.
Status Cache Options
The Status Cache is a very powerful feature. It allows you to keep track of recent changes in all of the
remote (off-site) pages you link to. You can then use the Linklint output files to quickly check changed
pages to see if they still meet your needs.
The flags below make use of the status cache file linklint.url (kept in your HOME or LINKLINT directory).
This file keeps track of the modification dates of all the remote URLs that you check.
-netmod
Operates just like -net but makes use of the status cache. Newly checked URLs will be entered in the
cache. Linklint will tell you which (previously cached) URLs have been modified since the last
-netset.
-netset
Like -netmod but also resets the last modified status in the cache for all URLs that checked ok. If
you always use -netset, modified URLs will be reported just once.
-retry
Only checks URLs that have a host fail status in the cache. Sometimes a URL fails because its host
is temporarily down. This flag enables you to recheck just those links. An easy way to recheck all
the cached URLs with host failures is "linklint @@ -retry". Use "linklint @@linkdoc/remoteX.txt
-retry" if you want failed URLs to be cross referenced.
-flush
Removes all URLs from the cache that are not currently being checked. The -retry flag has no effect
on which URLs are flushed.
-checksum
Ensures that every URL that has been modified is reported as such. This flag can make the remote
checking take longer. Many of the pages that require a checksum are dynamically generated and will
always be reported as modified.
-cache directory
Reads and writes the linklint.url cache file in this directory. The default directory is set by your
LINKLINT or HOME environment variables.
Output Options
No output files are generated by default, only progress and a brief summary of the results are printed to
the screen. You can produce complete documentation (split up into separate files) in a -doc directory or
put selected output in a single -out file or by redirecting the standard output to a file. See the Output
File Specification section for a detailed description of all output files.
Multi File Output
-doc linkdoc
Sends all output to the linkdoc directory. The output is divided into separate .txt and .html files.
Complete documentation is always produced regardless of the single file flags.
The file index.txt contains an index to all the other files; index.html is an HTML version of the
index. The index files for remote URL checking are ur_lindex.txt and url_index.html.
-textonly
Prevents any HTML files from being created in the -doc directory.
-htmlonly
Erases redundant text files in the -doc directory after they have been used to create the HTML output
files. The files remote.txt and remoteX.txt are not erased since they can be used by Linklint to
recheck remote URLs.
-docbase base
Overrides the default base expression used for directing a browser to the resources listed in the
output HTML files. The base is prepended to local links in the output HTML files. This only affects
the links in HTML output files, it has no effect on what is displayed in these files. Ordinarily
this flag would only be used during a local site check to set the base to "http://host".
-output_frames
All HTML output data files are linked to from index.html. If you use this flag then the the data
files will be opened up in a new frame (window) which can be handy in some cases since it always
leaves the index.html file open in its own window.
-output_index filename
The output index files were previously named linklint.txt and linklint.html. These have now been
changed to index.txt and index.html. You can use the -output_index option to change this name back
to "linklint" or to something else.
-url_doc_prefix url/
By default, the output files associate with remote URL checking all start with "url". You can change
this with the -url_doc_prefix option. If the url_doc_prefix contains a "/" character then the
appropriate directory will be created (as a subdirectory of the -doc directory).
-dont_output xxxx
Don't create output files that contain "xxxx". Can be repeated. Example:
-dont_output "X$"
will supress the output of all cross reference files.
Single File Output
-error
Lists missing files and other errors.
-out file
Sends list output and summary information to file.
-list
Lists all found files, links, directories etc.
-warn
Lists all warnings.
-xref
Adds cross references to the lists.
-forward
Sorts lists by referring file.
Debug and other Flags
-db1
Debugs command line input and linkset expressions.
-db2
Prints the name of every file that gets checked (not just HTML files).
-db3
Debugs HTML parser, prints out tags and resulting links.
-db4
Debugs socket connection (kind of).
-db5
Not used.
-db6
Details last-modified status for remote URLs (requires -netset or -netmod).
-db7
Prints brief debug information while checking remote URLs.
-db8
Prints all http headers while checking remote URLs.
-db9
Generates random http errors.
-version
Gives version information.
-help
Lists a few simple examples of how to use Linklint.
-help_all
Lists all help (contained in program) including every input option.
-quiet
Disables printing progress to the screen.
-silent
Disables printing summarys to the screen.
AUTHOR
Linklint is written by James B. Bowlin <jbowlin@linklint.org>. This manual page was written by Denis
Barbier <barbier@debian.org> for the Debian system (but may be used by others) by cut'n'paste from
original documentation written in HTML.