Ubuntu Manpage: lttng-snapshot - Take LTTng snapshots and configure snapshot outputs

Provided by: lttng-tools_2.11.2-1build1_amd64

NAME

       lttng-snapshot - Take LTTng snapshots and configure snapshot outputs

SYNOPSIS

       Add a snapshot output:

       lttng [GENERAL OPTIONS] snapshot add-output [--max-size=SIZE]
             [--name=NAME] [--session=SESSION]
             (--ctrl-url=URL --data-url=URL | URL)

       Remove a snapshot output:

       lttng [GENERAL OPTIONS] snapshot del-output [--session=SESSION]
             (ID | NAME)

       List current snapshot outputs:

       lttng [GENERAL OPTIONS] snapshot list-output [--session=SESSION]

       Take a snapshot:

       lttng [GENERAL OPTIONS] snapshot record [--max-size=SIZE]
             [--name=NAME] [--session=SESSION]
             (--ctrl-url=URL --data-url=URL | URL)

DESCRIPTION

The lttng snapshot command manages the snapshot outputs and takes snapshots.

A snapshot is a dump of the current sub-buffers of all the channels of a given tracing session. When a
snapshot is taken, the memory dump is sent to the registered snapshot outputs.

The tracing session should be created in snapshot mode to make sure that taking snapshots is allowed.
This is done at tracing session creation time using the lttng-create(1) command’s --snapshot option.

Note that, when a snapshot is taken, the sub-buffers are not cleared. This means that different recorded
snapshots may contain the same events.

If you want, instead, to keep all the trace data, but divide it into archived chunks which are then free
to process (just like snapshots), see the lttng-rotate(1) and lttng-enable-rotation(1) commands. Trace
chunk archives do not overlap like snapshots can.

Snapshot outputs
Snapshot outputs are the destinations of snapshot files when a snapshot is taken using the record action.

As of this version, only one snapshot output is allowed.

A snapshot output can be added using the add-output action. The output destination URL is set using
either the URL positional argument, or both the --ctrl-url and --data-url options. See lttng-create(1) to
learn more about the URL format.

A name can be assigned to an output when adding it using the --name option. This name is part of the
names of the snapshot files written to this output.

By default, the snapshot files can be as big as the sum of the sizes of all the sub-buffers or all the
channels of the selected tracing session. The maximum total size of all the snapshot files can be
configured using the --max-size option.

Snapshot outputs can be listed using the list-output action.

Snapshot outputs can be removed using the del-output action. The configured name can be used when
removing an output, or an ID as listed by the list-output action.

Taking a snapshot
Taking a snapshot of the current tracing session is as easy as:

$ lttng snapshot record

This writes the snapshot files to the configured output. It is possible to use a custom, unregistered
output at record time using the same options supported by the add-output action.

Note
Before taking a snapshot on a system with a high event throughput, it is recommended to first run
lttng stop (see lttng-stop(1)). Otherwise, the snapshot could contain "holes", the result of the
tracers overwriting unconsumed trace packets during the record operation. After the snapshot is
recorded, the tracers can be started again with lttng start (see lttng-start(1)).

OPTIONS

       General options are described in lttng(1).

   Target
       -s SESSION, --session=SESSION
           Take a snapshot of the sub-buffers of the channels contained in the tracing session named SESSION
           instead of the current tracing session.

   Snapshot output
       -C URL, --ctrl-url=URL
           Set control path URL to URL (must use --data-url option also).

       -D URL, --data-url=URL
           Set data path URL to URL (must use --ctrl-url option also).

       -m SIZE, --max-size=SIZE
           Limit the total size of all the snapshot files written when recording a snapshot to SIZE bytes. The k
           (kiB), M (MiB), and G (GiB) suffixes are supported.

       -n NAME, --name=NAME
           Assign the name NAME to the snapshot output.

   Program information
       -h, --help
           Show command help.

           This option, like lttng-help(1), attempts to launch /usr/bin/man to view the command’s man page. The
           path to the man pager can be overridden by the LTTNG_MAN_BIN_PATH environment variable.

       --list-options
           List available command options.

ENVIRONMENT VARIABLES

       LTTNG_ABORT_ON_ERROR
           Set to 1 to abort the process after the first error is encountered.

       LTTNG_HOME
           Overrides the $HOME environment variable. Useful when the user running the commands has a
           non-writable home directory.

       LTTNG_MAN_BIN_PATH
           Absolute path to the man pager to use for viewing help information about LTTng commands (using lttng-
           help(1) or lttng COMMAND --help).

       LTTNG_SESSION_CONFIG_XSD_PATH
           Path in which the session.xsd session configuration XML schema may be found.

       LTTNG_SESSIOND_PATH
           Full session daemon binary path.

           The --sessiond-path option has precedence over this environment variable.

       Note that the lttng-create(1) command can spawn an LTTng session daemon automatically if none is running.
       See lttng-sessiond(8) for the environment variables influencing the execution of the session daemon.

FILES

       $LTTNG_HOME/.lttngrc
           User LTTng runtime configuration.

           This is where the per-user current tracing session is stored between executions of lttng(1). The
           current tracing session can be set with lttng-set-session(1). See lttng-create(1) for more
           information about tracing sessions.

       $LTTNG_HOME/lttng-traces
           Default output directory of LTTng traces. This can be overridden with the --output option of the
           lttng-create(1) command.

       $LTTNG_HOME/.lttng
           User LTTng runtime and configuration directory.

       $LTTNG_HOME/.lttng/sessions
           Default location of saved user tracing sessions (see lttng-save(1) and lttng-load(1)).

       /etc/lttng/sessions
           System-wide location of saved tracing sessions (see lttng-save(1) and lttng-load(1)).

           Note
           $LTTNG_HOME defaults to $HOME when not explicitly set.

EXIT STATUS

       0
           Success

       1
           Command error

       2
           Undefined command

       3
           Fatal error

       4
           Command warning (something went wrong during the command)

BUGS

       If you encounter any issue or usability problem, please report it on the LTTng bug tracker
       <https://bugs.lttng.org/projects/lttng-tools>.

RESOURCES

       •   LTTng project website <https://lttng.org>

       •   LTTng documentation <https://lttng.org/docs>

       •   Git repositories <http://git.lttng.org>

       •   GitHub organization <http://github.com/lttng>

       •   Continuous integration <http://ci.lttng.org/>

       •   Mailing list <http://lists.lttng.org> for support and development: lttng-dev@lists.lttng.org

       •   IRC channel <irc://irc.oftc.net/lttng>: #lttng on irc.oftc.net

COPYRIGHTS

       This program is part of the LTTng-tools project.

       LTTng-tools is distributed under the GNU General Public License version 2
       <http://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html>. See the LICENSE
       <https://github.com/lttng/lttng-tools/blob/master/LICENSE> file for details.

THANKS

       Special thanks to Michel Dagenais and the DORSAL laboratory <http://www.dorsal.polymtl.ca/> at École
       Polytechnique de Montréal for the LTTng journey.

       Also thanks to the Ericsson teams working on tracing which helped us greatly with detailed bug reports
       and unusual test cases.