Provided by: mia-tools_2.4.6-5build3_amd64 
NAME
mia-3dcost-translatedgrad - Evaluate the cost gradient between two images and convert it to a spline
representation.
SYNOPSIS
mia-3dcost-translatedgrad -i <in-file> -r <ref-file> -o <out-file> [options]
DESCRIPTION
mia-3dcost-translatedgrad Evaluate the cost gradient between two images and evaluate the transformation
related gradient for it based on the given transformation model.
OPTIONS
-i --in-file=(input, required); io
input image
For supported file types see PLUGINS:3dimage/io
-r --ref-file=(input, required); io
reference image
For supported file types see PLUGINS:3dimage/io
-o --out-file=(output, required); io
output vector field
For supported file types see PLUGINS:3dtransform/io
-g --gradimg-file=(output); io
norm image of the spline transformed gradient
For supported file types see PLUGINS:3dimage/io
-C --cost-gradimg-file=(output); io
norm image of the cost gradient
For supported file types see PLUGINS:3dimage/io
-f --transForm=spline:rate=5
Transformation the gradient relates to
For supported plugins see PLUGINS:3dimage/transform
-c --cost=ssd
cost function to use
For supported plugins see PLUGINS:3dimage/cost
Help & Info
-V --verbose=warning
verbosity of output, print messages of given level and higher priorities. Supported
priorities starting at lowest level are:
trace ‐ Function call trace
debug ‐ Debug output
info ‐ Low level messages
message ‐ Normal messages
warning ‐ Warnings
fail ‐ Report test failures
error ‐ Report errors
fatal ‐ Report only fatal errors
--copyright
print copyright information
-h --help
print this help
-? --usage
print a short help
--version
print the version number and exit
Processing
--threads=-1
Maxiumum number of threads to use for processing,This number should be lower or equal to
the number of logical processor cores in the machine. (-1: automatic estimation).
PLUGINS: 1d/splinebc
mirror Spline interpolation boundary conditions that mirror on the boundary
(no parameters)
repeat Spline interpolation boundary conditions that repeats the value at the boundary
(no parameters)
zero Spline interpolation boundary conditions that assumes zero for values outside
(no parameters)
PLUGINS: 1d/splinekernel
bspline B-spline kernel creation , supported parameters are:
d = 3; int in [0, 5]
Spline degree.
omoms OMoms-spline kernel creation, supported parameters are:
d = 3; int in [3, 3]
Spline degree.
PLUGINS: 3dimage/cost
lncc local normalized cross correlation with masking support., supported parameters are:
w = 5; uint in [1, 256]
half width of the window used for evaluating the localized cross correlation.
mi Spline parzen based mutual information., supported parameters are:
cut = 0; float in [0, 40]
Percentage of pixels to cut at high and low intensities to remove outliers.
mbins = 64; uint in [1, 256]
Number of histogram bins used for the moving image.
mkernel = [bspline:d=3]; factory
Spline kernel for moving image parzen hinstogram. For supported plug-ins see
PLUGINS:1d/splinekernel
rbins = 64; uint in [1, 256]
Number of histogram bins used for the reference image.
rkernel = [bspline:d=0]; factory
Spline kernel for reference image parzen hinstogram. For supported plug-ins see
PLUGINS:1d/splinekernel
ncc normalized cross correlation.
(no parameters)
ngf This function evaluates the image similarity based on normalized gradient fields. Given
normalized gradient fields $ _S$ of the src image and $ _R$ of the ref image various evaluators
are implemented., supported parameters are:
eval = ds; dict
plugin subtype (sq, ds,dot,cross). Supported values are:
ds ‐ square of scaled difference
dot ‐ scalar product kernel
cross ‐ cross product kernel
ssd 3D image cost: sum of squared differences, supported parameters are:
autothresh = 0; float in [0, 1000]
Use automatic masking of the moving image by only takeing intensity values into accound
that are larger than the given threshold.
norm = 0; bool
Set whether the metric should be normalized by the number of image pixels.
ssd-automask
3D image cost: sum of squared differences, with automasking based on given thresholds,
supported parameters are:
rthresh = 0; double
Threshold intensity value for reference image.
sthresh = 0; double
Threshold intensity value for source image.
PLUGINS: 3dimage/io
analyze Analyze 7.5 image
Recognized file extensions: .HDR, .hdr
Supported element types:
unsigned 8 bit, signed 16 bit, signed 32 bit, floating point 32 bit, floating point 64
bit
datapool Virtual IO to and from the internal data pool
Recognized file extensions: .@
dicom Dicom image series as 3D
Recognized file extensions: .DCM, .dcm
Supported element types:
signed 16 bit, unsigned 16 bit
hdf5 HDF5 3D image IO
Recognized file extensions: .H5, .h5
Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit,
unsigned 32 bit, signed 64 bit, unsigned 64 bit, floating point 32 bit, floating point 64
bit
inria INRIA image
Recognized file extensions: .INR, .inr
Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32
bit, floating point 32 bit, floating point 64 bit
mhd MetaIO 3D image IO using the VTK implementation (experimental).
Recognized file extensions: .MHA, .MHD, .mha, .mhd
Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32
bit, floating point 32 bit, floating point 64 bit
nifti NIFTI-1 3D image IO. The orientation is transformed in the same way like it is done with
'dicomtonifti --no-reorder' from the vtk-dicom package.
Recognized file extensions: .NII, .nii
Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32
bit, signed 64 bit, unsigned 64 bit, floating point 32 bit, floating point 64 bit
vff VFF Sun raster format
Recognized file extensions: .VFF, .vff
Supported element types:
unsigned 8 bit, signed 16 bit
vista Vista 3D
Recognized file extensions: .-, .V, .VISTA, .v, .vista
Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit,
unsigned 32 bit, floating point 32 bit, floating point 64 bit
vti 3D image VTK-XML in- and output (experimental).
Recognized file extensions: .VTI, .vti
Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32
bit, floating point 32 bit, floating point 64 bit
vtk 3D VTK image legacy in- and output (experimental).
Recognized file extensions: .VTK, .VTKIMAGE, .vtk, .vtkimage
Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32
bit, floating point 32 bit, floating point 64 bit
PLUGINS: 3dimage/transform
affine Affine transformation (12 degrees of freedom), supported parameters are:
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
axisrot Restricted rotation transformation (1 degrees of freedom). The transformation is restricted to
the rotation around the given axis about the given rotation center, supported parameters are:
axis =(required, 3dfvector)
rotation axis.
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
origin =(required, 3dfvector)
center of the transformation.
raffine Restricted affine transformation (3 degrees of freedom). The transformation is restricted to
the rotation around the given axis and shearing along the two axis perpendicular to the given
one, supported parameters are:
axis =(required, 3dfvector)
rotation axis.
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
origin =(required, 3dfvector)
center of the transformation.
rigid Rigid transformation, i.e. rotation and translation (six degrees of freedom)., supported
parameters are:
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
origin = [[0,0,0]]; 3dfvector
Relative rotation center, i.e. <0.5,0.5,0.5> corresponds to the center of the volume.
rotation Rotation transformation (three degrees of freedom)., supported parameters are:
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
origin = [[0,0,0]]; 3dfvector
Relative rotation center, i.e. <0.5,0.5,0.5> corresponds to the center of the volume.
rotbend Restricted transformation (4 degrees of freedom). The transformation is restricted to the
rotation around the x and y axis and a bending along the x axis, independedn in each direction,
with the bending increasing with the squared distance from the rotation axis., supported
parameters are:
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
norot = 0; bool
Don't optimize the rotation.
origin =(required, 3dfvector)
center of the transformation.
spline Free-form transformation that can be described by a set of B-spline coefficients and an
underlying B-spline kernel., supported parameters are:
anisorate = [[0,0,0]]; 3dfvector
anisotropic coefficient rate in pixels, nonpositive values will be overwritten by the
'rate' value..
debug = 0; bool
enable additional debugging output.
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
kernel = [bspline:d=3]; factory
transformation spline kernel. For supported plug-ins see PLUGINS:1d/splinekernel
penalty = ; factory
transformation penalty energy term. For supported plug-ins see
PLUGINS:3dtransform/splinepenalty
rate = 10; float in [1, inf)
isotropic coefficient rate in pixels.
translate Translation (three degrees of freedom), supported parameters are:
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
vf This plug-in implements a transformation that defines a translation for each point of the grid
defining the domain of the transformation., supported parameters are:
imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc
imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel
PLUGINS: 3dtransform/io
bbs Binary (non-portable) serialized IO of 3D transformations
Recognized file extensions: .bbs
datapool Virtual IO to and from the internal data pool
Recognized file extensions: .@
vista Vista storage of 3D transformations
Recognized file extensions: .v, .v3dt
xml XML serialized IO of 3D transformations
Recognized file extensions: .x3dt
PLUGINS: 3dtransform/splinepenalty
divcurl divcurl penalty on the transformation, supported parameters are:
curl = 1; float in [0, inf)
penalty weight on curl.
div = 1; float in [0, inf)
penalty weight on divergence.
norm = 0; bool
Set to 1 if the penalty should be normalized with respect to the image size.
weight = 1; float in (0, inf)
weight of penalty energy.
EXAMPLE
Evaluate the SSD cost between src.v and ref.v and store the gradient gradient corresponding to a spline
transformation in grad.v3dt.
mia-3dcost-translatedgrad -i src.v -o grad.v3dt -f spline:rate=8 -c ssd
AUTHOR(s)
Gert Wollny
COPYRIGHT
This software is Copyright (c) 1999‐2015 Leipzig, Germany and Madrid, Spain. It comes with ABSOLUTELY
NO WARRANTY and you may redistribute it under the terms of the GNU GENERAL PUBLIC LICENSE Version 3
(or later). For more information run the program with the option '--copyright'.