Provided by: minc-tools_2.3.00+dfsg-3build2_amd64 
NAME
mincdump - Convert minc files to ASCII form (CDL)
SYNOPSIS
mincdump [-c] [-h] [-v var1,...] [-b lang] [-f lang] [-l len] [-n name] [-p f_digits[,d_digits]] file
DESCRIPTION
mincdump is based upon the netCDF tool ncdump, modified to work with both MINC 1 (netCDF) and MINC 2
(HDF5) format files. It is intended for use primarily with scripts such as mincdiff and mincheader.
Since it was not created at the Montreal Neurological Insititute it does not follow the usual conventions
for MINC programs.
mincdump generates an ASCII representation of a specified minc file on standard output. The ASCII
representation is in a form called CDL (``network Common Data form Language'') that can be viewed,
edited, or serve as input to ncgen. ncgen is a companion program that can generate a binary minc file
from a CDL file. Hence ncgen and mincdump can be used as inverses to transform the data representation
between binary and ASCII representations. See ncgen for a description of CDL and netCDF representations.
mincdump defines a default format used for each type of netCDF data, but this can be changed if a
`C_format' attribute is defined for a netCDF variable. In this case, mincdump will use the `C_format'
attribute to format each value. For example, if floating-point data for the netCDF variable `Z' is known
to be accurate to only three significant digits, it would be appropriate to use the variable attribute
Z:C_format = "%.3g"
mincdump may also be used as a simple browser for netCDF data files, to display the dimension names and
sizes; variable names, types, and shapes; attribute names and values; and optionally, the values of data
for all variables or selected variables in a netCDF file.
mincdump uses `_' to represent data values that are equal to the `_FillValue' attribute for a variable,
intended to represent data that has not yet been written. If a variable has no `_FillValue' attribute,
the default fill value for the variable type is used if the variable is not of byte type.
OPTIONS
-c Show the values of coordinate variables (variables that are also dimensions) as well as the
declarations of all dimensions, variables, and attribute values. Data values of non-coordinate
variables are not included in the output. This is the most suitable option to use for a brief
look at the structure and contents of a netCDF file.
-h Show only the header information in the output, that is the declarations of dimensions, variables,
and attributes but no data values for any variables. The output is identical to using the -c
option except that the values of coordinate variables are not included. (At most one of -c or -h
options may be present.)
-v var1,...,varn
The output will include data values for the specified variables, in addition to the declarations
of all dimensions, variables, and attributes. One or more variables must be specified by name in
the comma-delimited list following this option. The list must be a single argument to the
command, hence cannot contain blanks or other white space characters. The named variables must be
valid netCDF variables in the input-file. The default, without this option and in the absence of
the -c or -h options, is to include data values for all variables in the output.
-b lang
A brief annotation in the form of a CDL comment (text beginning with the characters ``//'') will
be included in the data section of the output for each `row' of data, to help identify data values
for multidimensional variables. If lang begins with `C' or `c', then C language conventions will
be used (zero-based indices, last dimension varying fastest). If lang begins with `F' or `f',
then Fortran language conventions will be used (one-based indices, first dimension varying
fastest). In either case, the data will be presented in the same order; only the annotations will
differ. This option is useful for browsing through large volumes of multidimensional data.
-f lang
Full annotations in the form of trailing CDL comments (text beginning with the characters ``//'')
for every data value (except individual characters in character arrays) will be included in the
data section. If lang begins with `C' or `c', then C language conventions will be used (zero-
based indices, last dimension varying fastest). If lang begins with `F' or `f', then Fortran
language conventions will be used (one-based indices, first dimension varying fastest). In either
case, the data will be presented in the same order; only the annotations will differ. This option
may be useful for piping data into other filters, since each data value appears on a separate
line, fully identified.
-l len Changes the default maximum line length (80) used in formatting lists of non-character data
values.
-n name
CDL requires a name for a netCDF data set, for use by ncgen -b in generating a default netCDF file
name. By default, mincdump constructs this name from the last component of the pathname of the
input netCDF file by stripping off any extension it has. Use the -n option to specify a different
name. Although the output file name used by ncgen -b can be specified, it may be wise to have
mincdump change the default name to avoid inadvertently overwriting a valuable netCDF file when
using mincdump, editing the resulting CDL file, and using ncgen -b to generate a new netCDF file
from the edited CDL file.
-p float_digits[,double_digits]
Specifies default precision (number of significant digits) to use in displaying floating-point or
double precision data values for attributes and variables. If specified, this value overrides the
value of the `C_format' attribute for any variable that has such an attribute. Floating-point
data will be displayed with float_digits significant digits. If double_digits is also specified,
double-precision values will be displayed with that many significant digits. In the absence of
any -p specifications, floating-point and double-precision data are displayed with 7 and 15
significant digits respectively. CDL files can be made smaller if less precision is required. If
both floating-point and double-presision precisions are specified, the two values must appear
separated by a comma (no blanks) as a single argument to the command. If you really want every
last bit of precision from the netCDF file represented in the CDL file for all possible floating-
point values, you will have to specify this with -p 9,17 (according to Theorem 15 of the paper
listed under REFERENCES).
EXAMPLES
Look at the structure of the data in the netCDF file `foo.mnc':
mincdump -c foo.mnc
Produce an annotated CDL version of the structure and data in the netCDF file `foo.mnc', using C-style
indexing for the annotations:
mincdump -b c foo.mnc > foo.cdl
Output data for only the variables `uwind' and `vwind' from the netCDF file `foo.mnc', and show the
floating-point data with only three significant digits of precision:
mincdump -v uwind,vwind -p 3 foo.mnc
Produce a fully-annotated (one data value per line) listing of the data for the variable `omega', using
Fortran conventions for indices, and changing the netCDF dataset name in the resulting CDL file to
`omega':
mincdump -v omega -f fortran -n omega foo.mnc > Z.cdl
AUTHOR
Originally written by members of the Unidata Program at the University Corporation for Atmospheric
Research.
Modified by Bert Vincent (bert@bic.mni.mcgill.ca) for use with both netCDF and HDF5 files.
COPYRIGHTS
Copyright © University Corporation for Atmospheric Research
REFERENCES
What Every Computer Scientist should Know About Floating-Point Arithmetic, D. Goldberg, ACM Computing
Surveys, Vol. 23, No. 1, March 1991, pp. 5-48.
SEE ALSO
ncdump(1), ncgen(1), netcdf(3)
BUGS
Character arrays that contain a null-byte are treated like C strings, so no characters after the null
byte appear in the output.
Multidimensional character string arrays are not handled well, since the CDL syntax for breaking a long
character string into several shorter lines is weak.
There should be a way to specify that the data should be displayed in `record' order, that is with the
all the values for `record' variables together that have the same value of the record dimension.
$Date: 2004-05-20 21:52:08 $ MINCDUMP(1)