Provided by: ncdu_1.14.1-1_amd64 
NAME
ncdu - NCurses Disk Usage
SYNOPSIS
ncdu [options] dir
DESCRIPTION
ncdu (NCurses Disk Usage) is a curses-based version of the well-known 'du', and provides a fast way to
see what directories are using your disk space.
OPTIONS
Mode Selection
-h, --help
Print a short help message and quit.
-v, -V, --version
Print ncdu version and quit.
-f FILE
Load the given file, which has earlier been created with the "-o" option. If FILE is equivalent to
"-", the file is read from standard input.
For the sake of preventing a screw-up, the current version of ncdu will assume that the directory
information in the imported file does not represent the filesystem on which the file is being
imported. That is, the refresh, file deletion and shell spawning options in the browser will be
disabled.
dir Scan the given directory.
-o FILE
Export all necessary information to FILE instead of opening the browser interface. If FILE is "-",
the data is written to standard output. See the examples section below for some handy use cases.
Be warned that the exported data may grow quite large when exporting a directory with many files.
10.000 files will get you an export in the order of 600 to 700 KiB uncompressed, or a little over 100
KiB when compressed with gzip. This scales linearly, so be prepared to handle a few tens of megabytes
when dealing with millions of files.
-e Enable extended information mode. This will, in addition to the usual file information, also read the
ownership, permissions and last modification time for each file. This will result in higher memory
usage (by roughly ~30%) and in a larger output file when exporting.
When using the file export/import function, this flag will need to be added both when exporting (to
make sure the information is added to the export), and when importing (to read this extra information
in memory). This flag has no effect when importing a file that has been exported without the extended
information.
This enables viewing and sorting by the latest child mtime, or modified time, using 'm' and 'M',
respectively.
Interface options
-0 Don't give any feedback while scanning a directory or importing a file, other than when a fatal error
occurs. Ncurses will not be initialized until the scan is complete. When exporting the data with
"-o", ncurses will not be initialized at all. This option is the default when exporting to standard
output.
-1 Similar to "-0", but does give feedback on the scanning progress with a single line of output. This
option is the default when exporting to a file.
In some cases, the ncurses browser interface which you'll see after the scan/import is complete may
look garbled when using this option. If you're not exporting to a file, "-2" is probably a better
choice.
-2 Provide a full-screen ncurses interface while scanning a directory or importing a file. This is the
only interface that provides feedback on any non-fatal errors while scanning.
-q Quiet mode. While scanning or importing the directory, ncdu will update the screen 10 times a second
by default, this will be decreased to once every 2 seconds in quiet mode. Use this feature to save
bandwidth over remote connections. This option has no effect when "-0" is used.
-r Read-only mode. This will disable the built-in file deletion feature. This option has no effect when
"-o" is used, because there will not be a browser interface in that case. It has no effect when "-f"
is used, either, because the deletion feature is disabled in that case anyway.
WARNING: This option will only prevent deletion through the file browser. It is still possible to
spawn a shell from ncdu and delete or modify files from there. To disable that feature as well, pass
the "-r" option twice (see "-rr").
-rr In addition to "-r", this will also disable the shell spawning feature of the file browser.
--si
List sizes using base 10 prefixes, that is, powers of 1000 (KB, MB, etc), as defined in the
International System of Units (SI), instead of the usual base 2 prefixes, that is, powers of 1024
(KiB, MiB, etc).
--confirm-quit
Requires a confirmation before quitting ncdu. Very helpful when you accidentally press 'q' during or
after a very long scan.
--color SCHEME
Select a color scheme. Currently only two schemes are recognized: off to disable colors (the default)
and dark for a color scheme intended for dark backgrounds.
Scan Options
These options affect the scanning progress, and have no effect when importing directory information from
a file.
-x Do not cross filesystem boundaries, i.e. only count files and directories on the same filesystem as
the directory being scanned.
--exclude PATTERN
Exclude files that match PATTERN. The files will still be displayed by default, but are not counted
towards the disk usage statistics. This argument can be added multiple times to add more patterns.
-X FILE, --exclude-from FILE
Exclude files that match any pattern in FILE. Patterns should be separated by a newline.
--exclude-caches
Exclude directories containing CACHEDIR.TAG. The directories will still be displayed, but not their
content, and they are not counted towards the disk usage statistics. See
http://www.brynosaurus.com/cachedir/
-L, --follow-symlinks
Follow symlinks and count the size of the file they point to. As of ncdu 1.14, this option will not
follow symlinks to directories and will count each symlinked file as a unique file (i.e. unlike how
hard links are handled). This is subject to change in later versions.
KEYS
? Show help + keys + about screen
up, down j, k
Cycle through the items
right, enter, l
Open selected directory
left, <, h
Go to parent directory
n Order by filename (press again for descending order)
s Order by filesize (press again for descending order)
C Order by number of items (press again for descending order)
a Toggle between showing disk usage and showing apparent size.
M Order by latest child mtime, or modified time. (press again for descending order) Requires the -e
flag.
d Delete the selected file or directory. An error message will be shown when the contents of the
directory do not match or do not exist anymore on the filesystem.
t Toggle dirs before files when sorting.
g Toggle between showing percentage, graph, both, or none. Percentage is relative to the size of the
current directory, graph is relative to the largest item in the current directory.
c Toggle display of child item counts.
m Toggle display of latest child mtime, or modified time. Requires the -e flag.
e Show/hide 'hidden' or 'excluded' files and directories. Please note that even though you can't see
the hidden files and directories, they are still there and they are still included in the directory
sizes. If you suspect that the totals shown at the bottom of the screen are not correct, make sure
you haven't enabled this option.
i Show information about the current selected item.
r Refresh/recalculate the current directory.
b Spawn shell in current directory.
Ncdu will determine your preferred shell from the "NCDU_SHELL" or "SHELL" variable (in that order),
or will call "/bin/sh" if neither are set. This allows you to also configure another command to be
run when he 'b' key is pressed. For example, to spawn the vifm(1) file manager instead of a shell,
run ncdu as follows:
export NCDU_SHELL=vifm
ncdu
q Quit
FILE FLAGS
Entries in the browser interface may be prefixed by a one-character flag. These flags have the following
meaning:
! An error occurred while reading this directory.
. An error occurred while reading a subdirectory, so the indicated size may not be correct.
< File or directory is excluded from the statistics by using exlude patterns.
> Directory is on another filesystem.
@ This is neither a file nor a folder (symlink, socket, ...).
H Same file was already counted (hard link).
e Empty directory.
EXAMPLES
To scan and browse the directory you're currently in, all you need is a simple:
ncdu
If you want to scan a full filesystem, your root filesystem, for example, then you'll want to use "-x":
ncdu -x /
Since scanning a large directory may take a while, you can scan a directory and export the results for
later viewing:
ncdu -1xo- / | gzip >export.gz
# ...some time later:
zcat export.gz | ncdu -f-
To export from a cron job, make sure to replace "-1" with "-0" to suppress any unnecessary output.
You can also export a directory and browse it once scanning is done:
ncdu -o- | tee export.file | ./ncdu -f-
The same is possible with gzip compression, but is a bit kludgey:
ncdu -o- | gzip | tee export.gz | gunzip | ./ncdu -f-
To scan a system remotely, but browse through the files locally:
ssh -C user@system ncdu -o- / | ./ncdu -f-
The "-C" option to ssh enables compression, which will be very useful over slow links. Remote scanning
and local viewing has two major advantages when compared to running ncdu directly on the remote system:
You can browse through the scanned directory on the local system without any network latency, and ncdu
does not keep the entire directory structure in memory when exporting, so you won't consume much memory
on the remote system.
HARD LINKS
Every disk usage analysis utility has its own way of (not) counting hard links. There does not seem to
be any universally agreed method of handling hard links, and it is even inconsistent among different
versions of ncdu. This section explains what each version of ncdu does.
ncdu 1.5 and below does not support any hard link detection at all: each link is considered a separate
inode and its size is counted for every link. This means that the displayed directory sizes are incorrect
when analyzing directories which contain hard links.
ncdu 1.6 has basic hard link detection: When a link to a previously encountered inode is detected, the
link is considered to have a file size of zero bytes. Its size is not counted again, and the link is
indicated in the browser interface with a 'H' mark. The displayed directory sizes are only correct when
all links to an inode reside within that directory. When this is not the case, the sizes may or may not
be correct, depending on which links were considered as "duplicate" and which as "original". The
indicated size of the topmost directory (that is, the one specified on the command line upon starting
ncdu) is always correct.
ncdu 1.7 and later has improved hard link detection. Each file that has more than two links has the "H"
mark visible in the browser interface. Each hard link is counted exactly once for every directory it
appears in. The indicated size of each directory is therefore, correctly, the sum of the sizes of all
unique inodes that can be found in that directory. Note, however, that this may not always be same as the
space that will be reclaimed after deleting the directory, as some inodes may still be accessible from
hard links outside it.
BUGS
Directory hard links are not supported. They will not be detected as being hard links, and will thus be
scanned and counted multiple times.
Some minor glitches may appear when displaying filenames that contain multibyte or multicolumn
characters.
All sizes are internally represented as a signed 64bit integer. If you have a directory larger than 8 EiB
minus one byte, ncdu will clip its size to 8 EiB minus one byte. When deleting items in a directory with
a clipped size, the resulting sizes will be incorrect.
Item counts are stored in a signed 32-bit integer without overflow detection. If you have a directory
with more than 2 billion files, quite literally anything can happen.
Please report any other bugs you may find at the bug tracker, which can be found on the web site at
https://dev.yorhel.nl/ncdu
AUTHOR
Written by Yoran Heling <projects@yorhel.nl>.
SEE ALSO
du(1)