Provided by: nn_6.7.3-12_amd64 
NAME
nn - efficient net news interface (No News is good news)
SYNOPSIS
nn [ options ] [ newsgroup | +folder | file ]...
nn -g [ -r ]
nn -a0 [ newsgroup ]...
DESCRIPTION
Net news is a world-wide information exchange service covering numerous topics in science and every day
life. Topics are organized in news groups, and these groups are open for everybody to post articles on a
subject related to the topic of the group.
Nn is a `point-and-shoot' net news interface program, or a news reader for short (not to be confused with
the human news reader). When you use nn, you can decide which of the many news groups you are interested
in, and you can unsubscribe to those which don't interest you. nn will let you read the new (and old)
articles in each of the groups you subscribe to using a menu based article selection prior to reading the
articles in the news group.
When a news group is entered, nn will locate all the presently unread articles in the group, and extract
their sender, subject, and other relevant information. This information is then rearranged, sorted, and
marked in various ways to give it a pleasant format when it is presented on the screen.
This will be done very quickly, because nn uses the NOV database via the NNTP XOVER command. The news
server to use can be overridden by setting the environment variable $NNTPSERVER to the name of the system
(such as news.newserver.com), or by setting the variable nntp-server (on the command line only, since it
is looked at before the init file), as "nntp-server=news.some.domain"). If you use multiple servers, you
probably want to set the nn-directory and newsrc variables on the command line to an alternate names as
well, since some of the data files are server dependent. If you are using a slow tcp link (such as ppp
over a modem) and NNTP, see the NOTES section at the end of this manual.
When the article menu appears on the screen, nn will be in a mode called selection mode. In this mode,
the articles which seems to be interesting can be selected by single keystrokes (using the keys a-z and
0-9). When all the interesting articles among the ones presently displayed have been selected, the space
bar is hit, which causes nn to enter reading mode.
In reading mode, each of the selected articles will be presented. You use the space bar to go on to the
next page of the current article, or to the next article. Of course, there are all sorts of commands to
scroll text up and down, skip to the next article, responding to an article, decrypt an article, and so
on.
When all the selected articles in the current group have been read, the last hit on the space bar will
cause nn will continue to the next group with unread articles, and enter selection mode on that group.
FREQUENTLY USED OPTIONS
nn accepts a lot of command line options, but here only the frequently used options are described.
Options can also be set permanently by including appropriate variable settings in the init file described
later. All options are described in the section on Command Line Options towards the end of this manual.
The frequently used command line options are:
-a0 Catch up on unread articles and groups. See the section "Catch up" below.
-g Prompt for the name of a news group or folder to be entered (with completion).
-r Used with -g to repeatedly prompt for groups to enter.
-lN Print only the first N lines of the first page of each article before prompting to continue. This
is useful on slow terminals and modem lines to be able to see the first few lines of longer
articles.
-sWORD Collect only articles which contain the string WORD in their subject (case is ignored). This is
normally combined with the -x and -m options to find all articles on a specific subject.
-s/regexp
Collect only articles whose subject matches the regular expression regexp. This is normally
combined with the -x and -m options to find all articles on a specific subject.
-nWORD or -n/regexp
Same as -s except that it matches on the sender's name instead of the article's subject. This is
normally combined with the -x and -m options to find all articles from a specific author. It
cannot be mixed with the -s option!
-i Normally searches with -n and -s are case independent. Using this option, the case becomes
significant.
-m Merge all articles into one `meta group' instead of showing them one group at a time. This is
normally used together with the -x and -s options to get all the articles on a specific subject
presented on a single menu (when you don't care about which group they belong to). When -m is
used, no articles will be marked as read.
-x[N] Present (or scan) all (or the last N) unread as well as read articles. When this option is used,
nn will never mark unread articles as read (i.e. .newsrc is not updated).
-X Read/scan unsubscribed groups also. Most useful when looking for a specific subject in all
groups, e.g.
nn -mxX -sSubject all
news.group or file or +folder
If none of these arguments are given, all subscribed news groups will be used. Otherwise, only
the specified news groups and/or files will be collected and presented. In specifying a news
groups, the following `meta notation' can be used:
If the news group ends with a `.' (or `.all'), all subgroups of the news group will be collected,
e.g.
comp.sources.
If a news group starts with a `.' (or `all.'), all the matching subgroups will be collected, e.g.
.sources.unix
The argument `all' identifies all (subscribed) news groups.
COMMAND INPUT
In general, nn commands consist of one or two key-strokes, and nn reacts instantly to the commands you
give it; you don't have to enter return after each command (except where explicitly stated).
Some commands have more serious effects than others, and therefore nn requests you to confirm the
command. You confirm by hitting the the y key, and reject by hitting the n key. Some `trivial' requests
may also be confirmed simply by hitting space. For example, to confirm the creation of a save file, just
hit space, but if one or more directories also have to be created, you must enter y.
Many commands will require that you enter a line of text, e.g. a file name or a shell command. If you
enter space as the first character on a line, the line will be filled with a default value (if one is
defined). For example, the default value for a file name is the last file name you have entered, and the
default shell command is your previous shell command. You can edit this default value as well as a
directly typed text, using the following editing commands. The erase, kill, and interrupt keys are the
keys defined by the current tty settings. On systems without job control, the suspend key will be
control-Z while it is the current suspend character on system with job control.
erase
Delete the last character on the line.
delete-word (normally ^W)
Delete the last word or component of the input.
kill
Delete all characters on the line.
interrupt and control-G
Cancel the command which needs the input.
suspend
Suspend nn if supported by the system. Otherwise, spawn an interactive shell.
return
Terminate the line, and continue with the command.
Related variables: erase-key, flow-control, flush-typeahead, help-key, kill-key, word-key.
BASIC COMMANDS
There are numerous commands in nn, and most of them can be invoked by a single keystroke. The
descriptions in this manual are based on the standard bindings of the commands to the keys, but it is
possible to customize these using the map command described later. For each of the keystroke commands
described in this manual, the corresponding command name will also be shown in curly braces, e.g.
{command}.
The following commands work in both selection mode and in reading mode. The notation ^X means `control
X':
? {help}
Help. Gives a one page overview of the commands available in the current mode.
^L {redraw}
Redraw screen.
^R {redraw}
Redraw screen (Same as ^L).
^P {message}
Repeat the last message shown on the message line. The command can be repeated to successively
show previous messages (the maximum number of saved messages is controlled via the message-history
variable.)
! {shell}
Shell escape. The user is prompted for a command which is executed by your favorite shell (see
the shell variable). Shell escapes are described in detail later on.
Q {quit}
Quit nn. When you use this command, you neither lose unread articles in the current group nor the
selections you might have made (unless the articles are expired in the meantime of course).
V {version}
Print release and version information.
:command {command}
Execute the command by name. This form can be used to invoke any of nn's commands, also those
which cannot be bound to a key (such as :coredump), or those which are not bound to a key by
default (such as post and unshar).
Related and basic variables: backup, backup-suffix, confirm-auto-quit, expert, mail, message-history,
new-group-action, newsrc, quick-count.
SELECTION MODE
In selection mode, the screen is divided into four parts: the header line showing the name of the news
group and the number of articles, the menu lines which show the collected articles - one article per
line, the prompt line where you enter commands, and the message line where nn prints various messages to
you.
Each menu line begins with an article id which is a unique letter (or digit if your screen can show more
than 26 menu lines). To select an articles for reading, you simply enter the corresponding id, and the
menu line will be high-lighted to indicate that the article is selected. When you have selected all the
interesting articles on the present menu, you simply hit space.
If there are more articles collected for the current group than could be presented on one screenful of
text, you will be presented with the next portion of articles to select from. When you have had the
opportunity to select among all the articles in the group, hitting space will enter reading mode.
If no articles have been selected in the current group, hitting space will enter selection mode on the
next news group, or exit nn if the current group was the last news group with unread articles. It is thus
possible to go through ALL unread articles (without reading any of them) just by hitting space a few
times.
The articles will be presented on the menu using one of the following layouts:
0: x Name......... Subject.............. +123
1: x Name......... 123 Subject..............
2: x 123 Subject...................................
3: x Subject...........................................
4: x Subject........................................
Here x is the letter or digit that must be entered to select the article, Name is the real name of the
sender (or the mail address if the real name cannot be found), Subject is the contents of the "Subject:"
line in the article, and 123 is the number of lines in the article.
Layout 0 and 1 are just two ways to present the same information, while layout 2 and 3 are intended for
groups whose articles have very long subject lines, e.g. comp.sources.
Layout 4 is a hybrid between layout 1 and 3. It will normally use layout 1, but it will use layout 3
(with a little indentation) for menu lines where the subject is longer than the space available with
layout 1.
Layout 1 is the default layout, and an alternative menu line layout is selected using the -L option or by
setting the layout variable. Once nn is started the layout can be changed at any time using the " key
{layout}.
The Name is limited to 16 characters, and to make maximum use of this space, nn will perform a series of
simplifications on the name, e.g. changing first names into initials, removing domain names from mail
addresses (if the real name is not found) etc. It does a good job, but some people on the net put weird
things into the From: field (or actually into their password file) which result in nn producing quite
cryptic, and sometimes funny "names".
One a usual 80 column terminal, the Subject is limited to about 60 characters (75 in layout 3) and is
thus only an approximation to the actual subject line which may be much longer. To get as much out of
this space, Re: prefixes (in various forms) are recognized and replaced by a single `>' character (see
the re-layout variable).
Since articles are sorted according to the subject, two or more adjacent articles may share the same
subject (ignoring any `>'s). In this case, only the first article will show the subject of the article;
the rest will only show the `>' character in the subject field (or a `-' if there is no `>' at the
beginning of the line). A typical menu will thus only show each subject once, saving a lot of time in
scanning the news articles.
If consolidated menus (see section below) are enabled, adjacent articles sharing the same subject will be
shown with a single line on the menu corresponding to the first of the articles. The number of articles
with the same subject will be shown as a braketed number in front of the subject, e.g. with layout 1:
x Name......... 123 [4] Subject..............
For further information see the section on consolidated menus below.
Related variables: collapse-subject, columns, confirm-entry, confirm-entry-limit, entry-report-limit,
fsort, kill, layout, limit, lines, long-menu, re-layout, repeat, slow-mode, sort, sort-mode, split,
subject-match-limit, subject-match-offset, subject-match-parts, subject-match-minimum.
ARTICLE ATTRIBUTES
While nn is running and between invocations, nn associates an attribute with each article on your system.
These attributes are used to differentiate between read and unread articles, selected articles, articles
marked for later treatment, etc. Depending on how nn is configured, these attributes can be saved
between invocations of nn, or some of them may only be used while nn is running.
The attribute is shown on the menu using either a single character following the article id or by high-
lighting the menu line, depending on the attribute and the capabilities of the terminal. You can also
change the attributes to your own taste (see the attributes variable).
The attribute of an article can be changed explicitly using the selection mode commands described below,
or it will change automatically for example when you have read or saved a selected article. If a command
may change any article attributes, it will be noted in the description of the command. The following
descriptions of the attributes will only mention the most important commands that may set (or preserve)
the attribute.
The following attributes may be associated with an article:
read Menu attribute "." - indicates that the article has been read or saved. When you leave the group,
these articles will be marked permanently read, and are not presented the next time you enter the
group.
seen Menu attribute "," - indicates that the article is unread, but that it has been presented on a
menu. Depending on how nn is configured, these articles will automatically be marked read when
you leave the group, they may remain seen, or they may just be unread the next time you enter the
group (see the auto-junk-seen, confirm-junk-seen, and retain-seen-status variables).
Only the commands continue (space) and read-skip (X) will mark unread articles on the current (or
all) menu pages as seen when they are used. Other commands that scroll through the menu pages or
enter reading mode will let unread articles remain unread.
unread Menu attribute " " - indicates an unread article. These articles were unread when you entered the
group, and they may remain unread when you leave the group, unless they have been marked seen by
the command that you used to leave the group or enter reading mode.
selected
Menu line high-lighted (or menu attribute "*") - indicates that you have selected the article. If
you leave the group, the selected articles will remain selected the next time you enter the group.
When you have read a selected article, the attribute will automatically change to read.
auto-selected
These articles have the same appearance as selected articles on the menu, and the only difference
is that these articles have been selected automatically via the auto-selection facility rather
than manually by you. Very few commands differentiate between these attributes and if they do, it
is explicitly stated in this manual. The main difference is that these articles are only marked
as unread when you leave the group (supposing they will also be auto-selected the next the group
is entered). This simplifies the house-keeping between invocations of nn.
leave Menu attribute "+" - indicates that the article is marked for later treatment by the leave-article
(l) command. These articles may be selected (on demand) when you have read all selected articles
in a group. However, if you do not select them then immediately, they are stored as the leave-
next attribute described below.
leave-next
Menu attribute "=" - indicates that the article is marked for later treatment by the leave-next
(L) command. This is a permanent attribute, which will remain on the article until you either
read the article, change the attribute, or it is expired. So assigning this attribute to an
article will effectively keep it unread until you do something. If the variable select-leave-next
is set, nn will ask whether these articles should be selected on entry to a group (but naturally,
doing so will change the leave-next attribute to select).
cancelled
Menu attribute "#" - indicates that the article has been cancelled. This is mainly useful when
tidying a folder; it is set by the cancel (C) command, and can be cleared by any command that
change attributes, e.g. you can select and deselect the article.
killed Menu attribute "!" - indicates that the article has been killed (e.g. by the K {kill-select}
command). Killed articles are immediately removed from the menu, so you should not normally see
articles with this attribute. If you do, report it as a bug!
The attributes are saved in two files: .newsrc (read articles) and .nn/select (other attributes). Plain
unread articles are saved by not occurring in either of these files. Both files are described in more
detail later on.
Related variables: attributes, auto-junk-seen, confirm-junk-seen, retain-seen-status, select-leave-next.
SELECTION MODE COMMANDS
The primary purpose of the selection mode is of course to select the articles to be read, but numerous
other commands may also be performed in this mode: saving of articles in files, replying and following up
on articles, mailing/forwarding articles, shell escapes etc.
As described above, the selected articles are marked either by showing the corresponding menu line in
standout mode (reverse video), or if the terminal does not have this capability by placing an asterisk
(*) after the selection letter or digit.
Most commands which are used to select articles will work as toggle commands. If the article is not
already selected, the selectedattribute on the article(s), independent on the previous attribute.
Otherwise, the article(s) will be deselected and marked unread. Consequently, any article can be marked
unread simply be selecting and deselecting it.
During selection, the cursor will normally be placed on the article following the last article whose
attribute was changed (initially the first article). The article pointed out by the cursor is called the
current article, and the following commands work relative to the current article and cursor position.
abc...z 01..9 {article N}
The article with the given identification letter or digit is selected or deselected. The
following article becomes the current article. If the variable auto-select-subject is set, all
articles with the same subject as the given article are selected.
. {select}
Select or deselect the current article and move the cursor to the next article.
, {line+1}
Move the cursor to the next article. You can use the down arrow as well.
/ {line-1}
Move cursor to previous article. You can use the up arrow as well.
* {select-subject}
Select or deselect all articles with same subject as current article. This will work across
several menu pages if necessary.
-x {select-range}
Select or deselect the range of articles between the current article and the article specified by
x. For example you can select all articles from e to k by simply typing e-k.
The following commands may change the attributes on all articles on the current menu page, or on all
articles on all menu pages.
@ {select-invert}
Reverse selections. All selected articles on the current page are deselected, and vice-versa.
(Use the find command to select all articles.)
~ {unselect-all}
Deselect all auto-selected articles in the group (this works across all menu pages). If the
command is executed twice, the selected articles will also be deselected.
+ {select-auto}
Perform auto-selections in the group (see the section on "auto kill/select" below).
= {find}
Prompts for a regular expression, and selects all articles on the menu (all pages) which matches
the regular expression. Depending on the variable select-on-sender matching is performed against
the subject (default) or the sender of the articles. An empty answer (= return) will reuse the
previous expression. Example: The command = . return will select all articles in the group.
J {junk-articles}
This is a very versatile command which can be used to perform all sorts of attribute changes,
either on individual articles, all articles on the current menu page, all articles with a specific
attribute, or all available articles. To access all the functions of this command, the J key may
have to be hit up to four times, to loop through different one-line menus. The full functionality
of the junk-articles command is described in a separate section below.
L {leave-next}
This is a specialized version of the generic J {junk-articles} command to set the leave-next
attribute on a subset of the articles on the menu. It is also described further below.
The following commands move between the pages belonging to the same news group when there are more
articles than will fit on a single page. These commands will not change any article attributes.
> {page+1}
Goto next menu page.
< {page-1}
Goto previous menu page, or to last menu page if on first menu page.
$ {page=$}
Goto last menu page.
^ {page=1}
Goto first menu page.
The following commands are used to enter reading mode for the selected articles, and to move between news
groups (in selection mode). They may change article attributes if noted below.
space {continue}
Continue to next menu page, or if on last menu page, read the selected articles. If no articles
have been selected, continue to the next news group. The unread articles on the current menu page
will automatically be marked seen.
return {continue-no-mark}
Identical to the continue command, except that the unread articles on the current menu page will
remain unread. (The newline key has the same effect).
Z {read-return}
Enter reading mode immediately with the currently selected articles. When all articles have been
read, return to selection mode in the current group. It will mark selected articles read as they
are read, but unread articles are not normally changed (can be controlled with the variable
marked-by-read-return.)
X {read-skip}
Mark all unmarked articles seen on all menu pages (or the pages defined by the marked-by-read-skip
variable), and enter reading mode immediately with the currently selected articles. As the
selected articles are read, they are marked read. When all selected articles have been read, nn
will enter selection mode in the next news group. When no articles are selected, it goes directly
to the next group. This can be used to skip all the articles in a large news group without having
to go through all the menu pages.
If you don't want to read the current group now, but want to keep it for later, you can use the following
commands which will only mark seen and read articles as read. Currently selected articles will still be
selected the next time you enter the group. None of these commands will change any attributes themselves
(by default).
N {next-group}
Go forward to the next group in the presentation sequence. If the variable marked-by-next-group
is set articles on the menu can optionally be marked seen
P {previous}
Go back to the previous group. This command will enter selection mode on the last active group
(two P commands in sequence will bring you to the current group). If there are still some unread
articles in the group, only those articles will be shown. Otherwise, all the articles which were
unread when nn was invoked will be shown marked with the read attribute (which can be changed as
usual).
As described in the "Article Attributes" section, the read and seen articles will normally be marked read
when you leave the group, and these articles are not shown the next time you enter the group.
In all releases prior to release 6.4, it was impossible to have individual articles in a group marked
unread when you left a group, and the default behaviour of release 6.4 onwards will closely match the
traditional behaviour. This means that the seen and read articles are treated alike for most practical
purposes with the default variable settings.
If you don't like nn to silently mark the seen articles read, you can set the variable confirm-junk-seen
to get nn to prompt you for confirmation before doing this, or you can unset the variable auto-junk-seen
to simply keep the seen articles for the next time you enter the group. You then have to use the J
{junk-articles} to mark articles read.
Using return {continue-no-mark} will also allow you to keep articles unread rather than marking them seen
when scrolling through the menu pages and entering reading mode. If this is your preferred reading
style, you can remap space to this command.
Related variables: auto-junk-seen, auto-preview-mode, auto-select-subject, case-fold-search, confirm-
auto-quit, confirm-entry, confirm-junk-seen, marked-by-next-group, marked-by-read-return, marked-by-read-
skip, retain-seen-status, select-on-sender.
CONSOLIDATED MENUS
Normally, nn will use one menu line for each article, so if there are many articles with identical
subjects, each menu page will only contain a few different subjects. To have each subject occur only
once on the menu, nn can operate with consolidated menus by setting the variable consolidated-menu.
When consolidated menus are used, nn operates with two kinds of subjects: open and closed.
An open subject is a subject which is shown in the traditional way with one menu line for each article
with the given subject. In other words, when consolidated menus are not used, all subjects are open (by
default).
A closed subject is a multi-article subject which is presented by a single menu line. This line will be
the normal menu line for the first (oldest) article with the subject, but with the subject field
annotated with a bracketed number showing the number of articles with that subject, e.g.
a Kim F. Storm 12 [4] Future plans for nn
b.Kim F. Storm 43 [3] More plans for nn
In this example, there are four unread articles with subject `a' of which the first is posted by me and
has 12 lines. The rest of the articles are hidden, and will only be shown on request. The `.' marker
on subject `b' shows that all three articles within that subject have been read (or seen).
To select (or deselect) ALL the articles within a closed subject, simply select the article shown on the
menu; this will automatically select (or deselect) the rest (see auto-select-closed). When all the
unread articles within a closed subject are selected, the menu line will be high-lighted.
If you want to view the individual articles in a subject (maybe to select individual articles), you can
open the subject with the commands:
(x Open subject x on menu.
(( Open current subject.
When you have completed viewing the opened subject, you can close it again using the commands:
)x Close subject x on menu (x is any article with the subject).
)) Close current subject.
In the basic layout of the menu line for a closed subject as shown above, ALL articles in the closed
subject are supposed to be either:
unread The menu line is not high-lighted.
selected
Menu line is fully high-lighted (if all UNREAD are selected).
read/seen
There is a `.' (read attribute) following the article id.
If neither of these cases apply, i.e. there is a mixture of unread, selected, and seen/read articles, the
bracketed number will have one of the following formats:
[U:T] There are U unread articles of T total (U<T).
[S/T] There are S selected articles of T total (S<U=T).
[S/U:T]
There are S selected of U unread of T total (S<U<T).
If there are any selected articles (S>0), the information between the brackets will be high-lighted (to
show that something is selected, but not all the unread articles).
Notice: Consolidated menus only work with the `subject' and `lexical' sorting methods.
Variables related to consolidated menus are: auto-select-closed, consolidated-menu, counter-delim-left,
counter-delim-right, counter-padding, save-closed-mode.
THE JUNK-ARTICLES AND LEAVE-NEXT COMMANDS
The J {junk-articles} command is a very flexible command which can perform all sorts of attribute
changes, either on individual articles, all articles on the current menu page, all articles with a
specific attribute, or all available articles.
To access all the functions of this command, the J key may have to be hit up to four times, to loop
through different one-line menus:
Mark Read
This submenu allows you to mark articles read.
Unmark This submenu allows you to mark articles unread.
Select This submenu allows you to select articles based on their attribute.
Kill This submenu allows you to mark articles read and remove them from the menu based on their
attribute.
The L {leave-next} command is an extension of the J command with a fifth menu:
Leave This menu allows you to mark articles for later handling with the leave-next attribute which will
keep the article unread until you explicitly change the attribute (e.g. by reading it) or it is
expired.
For each of these submenus, nn will list the most plausible choices you may use, but all of the following
answers can be used at all submenus. When you have entered a choice, nn will afterward ask whether the
change should be made to all menu pages or only the current page.
J Show next submenu.
L Change attribute on all leave articles.
N Change attribute on all leave-next articles.
R Change attribute on all read articles.
S Change attribute on all seen articles.
U Change attribute on all unmarked (i.e. unread) articles.
A Change attribute on all articles no matter their current attribute.
* Change attribute on all selected articles on the current page.
+ Change attribute on all selected articles on all pages.
a-z0-9 Change attribute on one or more specific articles on the current page. You end the list of
articles by a space or by using one of the other choices described above.
. Change attribute on current article.
, / Move the current article down or up the menu without changing any attributes.
READING MODE COMMANDS
In reading mode, the selected articles are presented one page at a time. To get the next page of an
article, simply hit space, and when you are on the last page of an article, hit space to get to the next
selected article. Articles are normally marked read when you go to the next article, while going back to
the menu, quitting nn, etc. will retain the attribute on the current article.
When you are on the last page of the last article, hit space to enter selection mode on the next group
(or the current group if reading mode was entered using the Z command).
To read an article, the following text scrolling commands are available:
space {continue}
Scroll one page forward or continue with the next article or group as described above.
backspace / delete {page-1}
Go one page backwards in article.
d {page+1/2}
Scroll one half page forward.
u {page-1/2}
Go one half page backwards.
return {line+1}
Scroll one line forward in the article.
tab {skip-lines}
Skip over lines starting with the same character as the last line on the current page. This is
useful to skip over included text or to the next file in a shell archive.
^ {page=1}
Move to the first page (excluding the header) of the article.
$ {page=$}
Move to the last page of the article.
gN {line=@}
Move to line N in the article.
/regexp {find}
Search forward for text matching the regular expression regexp in the article. If a matching text
is found, it will be high-lighted.
. {find-next}
Repeat search for last regular expression.
h {page=0}
Show the header of the article, and continue from the top of the article.
H {full-digest}
If the current article is extracted from a digest, show the entire digest article including its
header. Another H command will return to the current subarticle.
D {rot13}
Turn rot13 (caesar) decryption on and off for the current article, and redraw current page. If
the article is saved while it is decrypted on the screen, it will be saved in decrypted form as
well!
c {compress}
Turn compression on and off for the current article and redraw current page. With compression
turned on, multiple spaces and tabs are shown as a single space. This makes it much easier to
read right justified text which separate words with several spaces. (See also the compress
variable)
The following commands are used to move among the selected articles.
n {next-article}
Move to next selected article. This command skips the rest of the current article, marks it read,
and jumps directly to the first page of the next selected article (or to the next group if it was
the last selected article).
l {leave-article}
Mark the current article with the leave attribute and continue with the next selected article.
When all the selected articles in the current group have been read, these left over articles can
be automatically selected and shown once more, or the treatment can be postponed to the next time
you enter the group.
This is particularly useful if you see an article which you may want to respond to unless one
the following articles is already saying what you intended to say.
L {leave-next}
Mark the current article with the leave-next attribute and continue with the next selected
article.
p {previous}
Goto previous article.
k {next-subject}
Kill subject. Skips rest of current article, and all following articles with the same subject.
The skipped articles are marked read. To kill a subject permanently use the K command.
* {select-subject}
Show next article with same subject (even if it is not selected). This command will select all
following articles with the same subject as the current article (similar to the `*' command in
selection mode). This can be used to select only the first article on a subject in selection
mode, and then select all follow-ups in reading mode if you find the article interesting.
a {advance-article}
Goto the following article on the menu even if it is not selected. This command skips the rest of
the current article and jumps directly to the first page of the next article (it will not skip to
the next group if it is the last article). The attribute on the current article will be restored,
except for the unread attribute which will be changed to seen.
b {back-article}
Goto the article before current article on the menu even if it is not selected. This is similar
to the a command, except for the direction.
The following commands perform an immediate return from reading mode to selection mode in the current
group or skip to the next group.
= {goto-menu}
Return to selection mode in the current group (think of = as the "icon" of the selection menu).
The articles read so far will be marked read.
N {next-group}
Skip the rest of the selected and unread articles in the current group and go directly to the next
group. Only the read (and seen) articles in the current group are marked as read.
X {read-skip}
Mark all articles in the current group as read and go directly to the next group. (You will be
asked to confirm this command.)
Related variables: case-fold-search, charset, compress, data-bits, date, header-lines, mark-overlap,
monitor, overlap, scroll-clear-page, stop, trusted-escape-codes, wrap-header-margin.
PREVIEWING ARTICLES IN SELECTION MODE
In selection mode, it is possible to read a specific article on the menu without entering reading mode
for all the selected articles on the menu. Using the commands described below will enter reading mode
for one article only, and then return to the menu mode immediately after (depending on the setting of the
preview-continuation variable).
If there are more than 5 free lines at the bottom of the menu screen, nn will use that space to show the
article (a minimal preview window can be permanently allocated with the window variable). Otherwise, the
screen will be cleared to show the article.
After previewing an article, it will be marked read (if the preview-mark-read variable is set), and the
following article will become the current article.
%x {preview}
Preview article x.
%% {preview}
Preview the current article.
When the article is being shown, the following reading mode commands are very useful:
= {goto-menu}
Skip the rest of the current article, and return to menu mode.
n {next-article}
Skip the rest of the current article, and preview the next article.
l {leave-article}
Mark the article as selected (!) on the menu for handling later on. Then skip the rest of the
current article, and preview the next article.
%y {preview}
Preview article y .
If the variable auto-preview-mode is set, just hitting the article id in menu mode will enter preview
mode on the specified article.
Related variables: auto-preview-mode, min-window, preview-continuation, preview-mark-read, window.
SAVING ARTICLES
The following commands are used to save articles in files, unpack archives, decode binaries, etc. It is
possible to use the commands in both reading mode to save the current article and in selection mode to
save one or more articles on the menu.
The saved articles will be appended to the specified file(s) followed by an empty line each. Both files
and directories will be created as needed. When an article has been saved in a file, a message reporting
the number of lines saved will be shown if the save-report variable is set (default on).
S {save-full}
Save articles including the full article header.
O {save-short}
Save articles with a short header containing only the name of the sender, the subject, and the
posting date of the article.
E {save-header}
Save only the header of the articles.
W {save-body}
Write article without a header.
:print {print}
Print article. Instead of a file name, this command will prompt for the print command to which
the current article will be piped. The default print command is specified at compile time, but it
can be changed by setting the printer variable. The output will be identical to that of the O
command.
:patch {patch}
Send articles through patch(1) (or the program defined in the patch-command variable). Instead of
a file name, you will be prompted for the name of a directory in which you want the patch command
to be executed. nn will then pipe the body of the article through the patch command.
The output from the patch process will be shown on the screen and also appended to a file named
Patch.Result in the patch directory.
:unshar {unshar}
Unshar articles. You will be prompted for the name of a directory in which you want nn to unshar
the articles. nn will then pipe the proper parts of the article body into a Bourne Shell whose
working directory will be set to the specified directory.
During the unpacking, the normal output from the unshar process will appear on the screen, and
the menu or article text will be redrawn when the process is finished.
The output is also appended to a file named Unshar.Result in the unshar directory.
The file specified in unshar-header-file (default "Unshar.Headers") in the unshar directory will
contain the header and initial text (before the shar data) from the article. You can use the `G'
{goto-group} command to look at the Unshar.Headers file.
:decode {decode}
Decode uuencoded articles into binary files. You will be prompted for the name of a directory in
which you want nn to place the decoded binary files (the file names are taken from the uuencoded
data).
nn will combine several articles into single files as needed, and you can even decode unrelated
packages (into the same directory) with one decode command.
To be able to decode a binary file which spans several articles, nn may have to ignore lines
which fail the normal sanity checks on uuencoded data instead of treating them as transmission
errors. Consequently, it is strongly recommended to check the resulting decoded file using the
checksum which is normally contained in the original article. (Actually, you are also supposed to
do this after decoding with a stand-alone uudecode program).
The header and initial information in the decoded articles are saved in the file specified in
decode-header-file (default "Decode.Headers") in the same directory as the decoded files.
If decode-skip-prefix is non-null, :decode will attempt to ignore up to that many characters on
each line to find the encoded data. This is particularly useful in some binaries groups where
files are both uuencoded and packed with shar; nn will ignore the prefix added to each line by
shar, and thus be able to unshar, concatenate, and decode multi-part postings automatically.
In reading mode, the following keys can also be used to invoke the save commands:
s Same as S.
o Same as O.
w Same as W.
P Same as :print.
The save commands will prompt for a file name which is expanded according to the rules described in the
section on file name expansion below. For each group, it is possible to specify a default save file in
the init file, either in connection with the group presentation sequence or in a separate save-files
section (see below). If a default save file is specified for the group, nn will show this on the prompt
line when it prompts for the file name. You can edit this name as usual, but if you kill the entire name
immediately, nn will replace the default name with the last file name you entered. If you kill this as
well, nn will leave you with a blank line.
If the quick-save variable is set, nn will only prompt for a save file name when the current article is
inside a folder; otherwise, the default save file defined in the init file will be used unconditionally.
If the file (and directories in the path) does not exist, nn will ask whether the file (and the
directories) should be created.
If the file name contains an asterisk, e.g.
part*.shar
nn will save each of the articles in uniquely named files constructed by replacing the asterisk by
numbers from the sequence 1, 2, 3, etc. The format of the string that replaces the * can be changed with
the save-counter variable, and the first number to use can be changed via save-counter-offset.
In selection mode, nn will prompt you for the identifier of one or more articles you want to save. When
you don't want to save more articles, just hit space. The saved articles will be marked read.
If you enter an asterisk `*' when you are prompted for an article to save, nn will automatically save all
the selected articles on the current menu page and mark them read.
Likewise, if you enter a plus `+', nn will save all the selected articles on all menu pages and mark them
read.
This is very useful to unpack an entire package using the :unshar and :decode commands. It can also be
used in combination with the save selected articles feature to save a selection of articles in separate,
successively numbered files. But do not confuse these two concepts! The S* and S+ commands can be used
to save the selected articles in a single file as well as in separate files, and the save in separate
files feature can be used also when saving individual articles, either in the selection mode, or in the
article reading mode.
When articles are saved in a file with a full or partial header, any header lines in the body of the
article will be escaped by a tilde (e.g. ~From: ...) to enable nn to split the folder into separate
articles. The escape string can be redefined via the embedded-header-escape variable.
Articles can optionally be saved in MAIL or MMDF compatible format by setting the mail-format and mmdf-
format variables. These variables only specify the format used when creating a new folder, while
appending to an existing folder will be done in the format of the folder (unless folder-format-check is
false).
Related variables: confirm-append, confirm-create, decode-header-file, decode-skip-prefix, default-save-
file, folder-save-file, edit-patch-command, edit-print-command, edit-unshar-command, folder, folder-
format-check, mail-format, mmdf-format, patch-command, printer, quick-save, save-counter, save-counter-
offset, save-report, suggest-default-save, unshar-command, unshar-header-file.
FOLDER MAINTENANCE
When more than one article is saved in a folder, nn is able to split the folder, and each article in the
folder can be treated like a separate article.
This means that you can save, decode, reply, follow-up, etc. just as with the original article.
You can also cancel (delete) individual articles in a folder using the normal C {cancel} command
described later. When you quit from the folder, you will then be given the option to remove the
cancelled articles from the folder.
The original folder is saved in a file named `BackupFolder~' in the .nn directory (see the backup-folder-
path variable) by renaming or copying the old folder as appropriate. When the folder has been
compressed, the backup folder will be removed unless the variable keep-backup-folder is set.
If all articles in a folder are cancelled, the folder will be removed or truncated to zero length
(whatever is allowed by directory and file permissions). In this case no backup folder is retained even
when keep-backup-folder is set!
If the variable trace-folder-packing is set, nn will show which articles are kept and which are removed
as the folder is rewritten.
Folders are rewritten in the format of the original folder, i.e. the mail-format and mmdf-format
variables are ignored.
Related variables: backup-folder-path, keep-backup-folder, trace-folder-packing.
FILE NAME EXPANSION
When the save commands prompts for a file name, the following file name expansions are performed on the
file name you enter:
+folder
The + is replaced by the contents of the folder variable (default value "~/News/") resulting in
the name of a file in the folder directory. Examples:
+emacs, +nn, +sources/shar/nn
+ A single plus is replaced by the expansion of the file name contained in the default-save-file
variable (or by folder-save-file when saving from a folder).
~/file The ~ is replaced by the contents of the environment variable HOME, i.e. the path name of your
home directory. Examples:
~/News/emacs, ~/News/nn, ~/src/shar/nn
~user/file
The ~user part is replaced by the user's home directory as defined in the /etc/passwd file.
|command-line
Instead of writing to a file, the articles are piped to the given shell (/bin/sh) command-line.
Each save or write command will create a separate pipe, but all articles saved or written in one
command (in selection mode) are given as input to the same shell command. Example:
| pr | lp
This will print the articles on the printer after they have been piped through pr.
It is possible to create separate pipes for each saved article by using a double pipe symbol
in the beginning of the command, e.g.
|| cd ~/src/nn ; patch
The following symbols are expanded in a file name or command:
$F will be expanded to the name of the current group with the periods replaced by slashes, e.g.
rec/music/synth.
$G will be expanded to the name of the current group.
$L will be expanded to the last component of the name of the current group. You may use this to
create default save file names like +src/$L in the comp.sources groups.
$N will be expanded to the (local) article number, e.g. 1099. In selection mode it is only allowed
at the end of the file name!
$(VAR) is replaced by the string value of the environment variable VAR.
Using these symbols, a simple naming scheme for `default folder name' is +$G which will use the group
name as folder name. Another possibility is +$F/$N.
As mentioned above, you can also instruct nn to save a series of files in separate, unique files. All
that is required is that the file name contains an asterisk, e.g.
+src/hype/part*.shar
This will cause each of the articles to be saved in separate, unique files named part1.shar, part2.shar,
and so on, always choosing a part number that results in a unique file name (i.e. if part1.shar did
already exist, the first article would be saved in part2.shar, the next in part3.shar, and so on).
Related variables: default-save-file, folder, folder-save-file, save-counter, save-counter-offset.
FILE AND GROUP NAME COMPLETION
When entering a file name or a news group name, a simple completion feature is available using the space,
tab, and ? keys.
Hitting space anywhere during input will complete the current component of the file name or group name
with the first available possibility.
If this possibility is not the one you want, keep on hitting space until it appears.
When the right completion has appeared, you can just continue typing the file or group name, or you can
hit tab to fix the current component, and get the first possibility for the next component, and then use
space to go through the other possible completions.
The ? key will produce a list of the possible completions of the current component. If the list is too
long for the available space on screen, the key can be repeated to get the next part of the list.
The current completion can be deleted with the erase key.
The default value for a file name is the last file name you have entered, so if you enter a space as the
first character after the prompt, the last file name will be repeated (and you can edit it if you like).
In some cases, a string will already be written for you in the prompt line, and to get the default value
in these cases, use the kill key. This also means that if you neither want the initial value, nor the
default value, you will have to hit the kill twice to get a clean prompt line.
Related variables: comp1-key, comp2-key, help-key, suggest-default-save.
POSTING AND RESPONDING TO ARTICLES
In both selection mode and reading mode you can post new articles, post follow-ups to articles, send
replies to the author of an article, and you can send mail to another user with the option of including
an article in the letter. In reading mode, a response is made to the current article, while in selection
mode you will be prompted for an article to respond to.
The following commands are available (the lower-case equivalents are also available in reading mode):
R {reply}
Reply through mail to the author of the article. This is the preferred way to respond to an
article unless you think your reply is of general interest.
F {follow}
Follow-up with an article in the same newsgroup (unless an alternative group is specified in the
article header). The distribution of the follow-up is normally the same as the original article,
but this can be modified via the follow-distribution variable.
M {mail}
Mail a letter or forward an article to a single recipient. In selection mode, you will be
prompted for an article to include in your letter, and in reading mode you will be asked if the
current article should be included in the letter. You will then be prompted for the recipient of
the letter (default recipient is yourself) and the subject of the letter (if an article is
included, you may hit space to get the default subject which is the subject of the included
article).
The header of the article is only included in the posted letter if it is forwarded (i.e. not
edited), or if the variable include-full-header is set.
:post {post}
Post a new article to any newsgroup. This command will prompt you for a comma-separated list of
newsgroups to post to (you cannot enter a space because space is used for group name completion as
described below).
If you enter ? {help-key} as the first key, nn will show you a list of all available news groups
and their purpose. While paging through this list, you can enter q to quit looking at the list.
You can also enter / followed by a regular expression (typically a single word) which will cause
nn to show a (much shorter) list containing only the lines matching the regular expression.
Normally, you will be prompted for the distribution of the article with the default take from
default-distribution, but this can be changed via the post-distribution variable.
Generally, nn will construct a file with a suitable header, optionally include a copy of the article in
the file with each non-empty line prefixed by a `>' character (except in mail mode), and invoke an editor
of your choice (using the EDITOR environment variable) on this file, positioning you on the first line of
the body of the article (if it knows the editor).
When you have completed editing the message, it will compare it to the unedited file, and if they are
identical (i.e. you did not make any changes to the file), or it is empty, the operation is cancelled.
Otherwise you will be prompted for an action to take on the constructed article (enter first letter
followed by return, or just return to take the default action):
a)bort c)c e)dit h)old i)spell m)ail p)ost r)eedit s)end v)iew w)rite 7)bit
Action: (post article)
You now have the opportunity to perform one of the following actions:
a throw the response away (will ask for confirmation),
c mail a copy of a follow-up to the poster of the article,
e edit the file again,
h hold response for later completion,
i run an (interactive) spell-checker on the text,
m mail a (blind) copy to a specified recipient,
n same as abort (no don't post),
p post article (same as send),
r throw away the edited text and edit the original text,
s send the article or letter,
v view the article (through the pager),
w append it to a file (before you send it),
y confirm default answer (e.g. yes post it), or
7 strip the high-order bit from all characters in the message
If you have selected a 7-bit character set (this is determined by the values of the charset and data-bits
variables), nn will not allow you to post an article or send a letter whose body contains characters with
the high-order bit set. It will warn you after you have first edited the message and disable the c)c,
m)ail, p)ost, s)end and y)es actions. You can then either e)dit the message to delete those characters,
use 7)bit to strip the high-order bits, a)bort the message, or h)old it and select an 8-bit character set
from nn.
To complete an unfinished response saved by the h)old command, simply enter any response action, e.g. R
{reply}. This will notice the unfinished response and ask you whether you want to complete it now. Only
one unfinished response can exist at a time. Notice that the $A environment variable may no longer be
valid as a path to the original article when the response is completed.
If your message contains 8-bit characters, the charset variable is not set to "unknown" and the message
does not already have a MIME-Version or Content-XXX header, nn will add the following headers to your
message before sending it:
MIME-Version: 1.0
Content-Type: text/plain; charset=charset
Content-Transfer-Encoding: 8bit
It must be noted that sending 8-bit characters over the current news and mail networks is risky at best;
although large parts of the network will pass through such characters unchanged, high-order bits may
occasionally be stripped. Although the MIME standard provides solutions for this by encoding the
characters, this is not yet supported by nn. Adding the above headers is an interim solution that is
compatible with current practice and is much better than just sending the message without any hints about
the character set used.
Related variables: append-signature-mail, append-signature-post, charset, data-bits, default-
distribution, follow-distribution, post-distribution, edit-response-check, editor, include-art-id,
include-full-header, included-mark, mail-header, mail-record, mail-script, mailer, mailer-pipe-input,
news-header, news-record, news-script, orig-to-include-mask, pager, query-signature, record, response-
check-pause, response-default-answer, save-counter, save-counter-offset, save-report, spell-checker.
JUMPING TO OTHER GROUPS
By default nn will present the news groups in a predefined sequence (see the section on Presentation
Sequence later on). To override this sequence and have a look at any other group the G {goto-group}
command available in both selection and reading mode enables you to move freely between all the
newsgroups.
Furthermore, the G command enables you to open folders and other files, to read old articles you have
read before, and to grep for a specific subject in a group.
It is important to notice that normally the goto command is recursive, i.e. a new menu level is created
when the specified group or folder is presented, and when it has been read, nn will continue the activity
in the group that was presented before the goto command was executed. However, if there are unread
articles in the target group you can avoid entering a new menu level by using the j reply described
below. The current menu level (i.e. number of nested goto commands) will be shown in the prompt line as
"<N>" (in reverse video).
The goto command is very powerful, but unfortunately also a little bit tricky at first sight, because the
facilities it provides depend on the context in which the command is used.
When executed, the goto command will prompt you for the name of the newsgroup, folder, or file to open.
It will use the first letter you enter to distinguish these three possibilities:
return An empty answer is equivalent to the current newsgroup.
letter The answer is taken to be the name of a newsgroup. If a news group with the given name does not
exist, nn will treat the answer as a regular expression and locate the first group in the
presentation sequence (or among all groups) whose name matches the expression.
+
The answer is taken to be the name of a folder. If only `+' is entered, it is equivalent to the
default save file for the current group.
/ or ./ or ~/
The answer is taken to be the name of a file, either relative to the current directory, relative
to your home directory, or an absolute path name for the file.
% In reading mode, this reply corresponds to reading the current article (and splitting it as a
digest). In selection mode, it will prompt for an article on the menu to read.
@ This choice is equivalent to the archive file for the current group.
= and number
These answers are equivalent to the same answers described below applied to the current group
(e.g. G return = and G = are equivalent).
Specifying a folder, a file, or an article (with %) will cause nn to treat the file like a digest and
split it into separate articles (not physically!) which are then presented on a menu in the usual way,
allowing you to read or save individual subarticles from the folder.
When you enter a group name, nn will ask you how many articles in the group you want to see on the menu.
You can give the following answers:
a number N
In this case you will get the newest N articles in the group, or if you specified the current
group (by hitting return to the group name prompt or entering the number directly), you will get
that many extra articles included on the same menu (without creating a new menu level).
j This answer can only be given if there are unread articles in the group. It will instruct nn to
jump directly to the specified group in the presentation sequence without creating a new menu
level.
u This instructs nn to present the unread articles in the group (if there are any). If you have
already read the group (in the current invocation of nn), the u answer will instruct nn to present
the articles that were unread when you entered nn.
a This instruct nn to present all articles in the group.
sword or =word
This instructs nn to search all articles in the groups, but only present the articles containing
the word word in the subject. Notice that case is ignored when searching for the word in the
subject lines.
nword Same as the s form except that it searched for articles where the sender name matches word.
eword Same as the s form except that it Psearched for articles where either the subject or the sender
name matches word.
word = /regexp
When the first character of the word specified with the s, n, and e forms is a slash `/', the rest
of the input is interpreted as a regular expression to search for. Notice that regular expression
matching is case insensitive when case-fold-search is set (default).
return The meaning of an empty answer depends on the context: if there are unread articles in the
specified group the unread articles will be presented, otherwise all articles in the group will be
included in the menu.
If you specified the current group, and the menu already contains all the available articles, nn will
directly prompt for a word to search for in the subject of all articles (the prompt will be an equal
sign.)
When the goto command creates a new menu level, nn will not perform auto kill or selection in the group.
You can use the + command in menu mode to perform the auto-selections.
There are three commands in the goto family:
G {goto-group}
This is the general goto command described above.
B {back-group}
Backup one or more groups. You can hit this key one or more times to go back in the groups
already presented (including those without new articles); when you have found the group you are
looking for, hit space to enter it.
A {advance-group}
Advance one or more groups. This command is similar to the B command, but operates in the
opposite direction.
N {next-group}
When used within an A or B command, it skips forward to the next group in the sequence with unread
articles or which has previously been visited.
P {previous}
When used within an A or B command, it skips backwards to the preceding group in the sequence with
unread articles or which has previously been visited.
Once you have entered an A or Bcommand, you can freely mix the A, B, P, and N commands to find the group
you want, and you can also use the G command to be prompted for a group name.
To show the use of the goto command some typical examples on its use are given below:
Present the unread articles in the dk.general group
G dk.general return u
Jump directly to the gnu.emacs group and continue from there
G gnu.emacs return j
Include the last 10 READ articles in the current group menu
G 10 return
Find all articles in rec.music.misc on the subject Floyd
G rec.music.misc return
= floyd return
Open the folder +nn
G +nn return
Split current article as a digest (in reading mode)
G %
Related variables: case-fold-search, default-save-file, folder-save-file
AUTOMATIC KILL AND SELECTION
When there is a subject or an author which you are either very interested in, or find completely
uninteresting, you can easily instruct nn to auto-select or auto-kill articles with specific subjects or
from specific authors. These instructions are stored in a kill file, and the most common types of
entries can be created using the following command:
K {kill-select}
Create an entry in your personal kill file. The contents of the entry is specified during a short
dialog that is described in details below. This command is available in both selection and
reading mode.
Entries in the kill file may apply to a single newsgroup or to all newsgroups. Furthermore, entries may
be permanent or they may be expired a given number of days after their entry.
To increase performance, nn uses a compiled version of the kill file which is read in when nn is invoked.
The compiled kill file will automatically be updated if the normal kill file has been modified.
The following dialog is used to build the kill file entry:
AUTO (k)ill or (s)elect (CR => Kill subject 30 days)
If you simply want nn to kill all articles with the subject of the current article (in reading
mode) or a specific article (which nn will prompt for in selection mode), just hit return. This
will cause nn to create an entry in the kill file to kill the current (or specified) subject in
the current group for a period of 30 days (which should be enough for the discussion to die out).
You can control the default kill period, or change it into a "select" period via the default-kill-
select variable.
If this "default behaviour" is not what you want, just answer either k or s to kill or select
articles, respectively, which will bring you on to the rest of the questions.
AUTO SELECT on (s)ubject or (n)ame (s)
(The SELECT will be substituted with KILL depending on the previous answer). Here you specify
whether you want the kill or select to depend on the subject of the article (s or space), or on
the name of the author (n).
SELECT NAME:
(Again SELECT may be substituted with KILL and SUBJECT may replace NAME). You must now enter a
name (or subject) to select (or kill). In reading mode, you may just hit return (or %) to use the
name (or subject) of the current article. In selection mode, you can use the name (or subject)
from an article on the menu by answering with % followed by the corresponding article identifier.
When the name or subject is taken from an article (the current or one from the menu), nn will only
select or kill articles where the name or subject matches the original name or subject exactly
including case.
If the first character typed at the prompt is a slash `/', the rest of the line is used as a
regular expression which is used to match the name or subject (case insensitive).
Otherwise, nn will select or kill articles which contain the specified string anywhere in the name
or subject (ignoring case).
SELECT in (g)roup `dk.general' or in (a)ll groups (g)
You must now specify whether the selection or kill should apply to the current group only (g or
space) or to all groups (a).
Lifetime of entry in days (p)ermanent (30)
You can now specify the lifetime of the entry, either by entering a number specifying the number
of days the entry should be active, or p to specify the entry as a permanent entry. An empty
reply is equivalent to 30 days.
CONFIRM SELECT ....
Finally, you will be asked to confirm the entry, and you should especially note the presence or
absence of the word exact which specify whether an exact match applies for the entry.
Related variables: default-kill-select, kill.
THE FORMAT OF THE KILL FILE
The kill file consists of one line for each entry. Empty lines and lines starting with a # character are
ignored. nn automatically places a # character in the first position of expired entries when it compiles
the kill file. You can then edit the kill file manually from time to time to clean out these entries.
Each line has the following format
[expire time :] [group name] : flags : string [: string]...
Permanent entries have no expire time (in which case the colon is omitted as well!). Otherwise, the
expire time defines the time (as a time_t value) when the entry should be expired.
The group name field can have three forms:
news.group.name
If it is the name of a single news group (e.g. comp.unix), the entry applies to that group only.
/regular expression
If it starts with a slash `/' followed by a regular expression (e.g. /^news\..*), the entry
applies to all groups whose name are matched by the regular expression.
empty An empty group field will apply the entry to all groups.
The flags field consists of a list of characters which identifies the type of entry, and the
interpretation of each string field. When used, the flag characters must be used in the order in which
they are described below:
~ (optional)
When this flag is present on any of the entries for a specific group, it causes all entires which
are not auto-selected to be killed. This is a simple way to say: I'm interested in this and that,
but nothing else.
+ or ! (optional)
Specify an auto-select + or an auto-kill ! entry, respectively. If neither are used, the article
is neither selected nor killed which is useful in combination with the `~' flag.
> (optional)
When used with a subject (flag s), the kill entry only matches follow-ups to that subject (i.e.
where the Subject: line starts with Re:). For example, to kill all "Re:"'s in rec.humor use the
following kill entry: rec.humor:!>s/:.
< (optional)
When used with a subject (flag s), the kill entry only matches base articles with that subject
(i.e. where the Subject: line does not start with Re:). For example, to kill all articles asking
for help (but not follow-ups) in the tex group, add this to your kill file:
comp.text.tex:!s</:^HELP
n or s or a (mandatory)
Specify whether the corresponding string applies to the name n or to the subject s of an article.
If flag a is used, the corresponding string is ignored (but must be present), and the entry
applies to articles with a non-empty References: line.
/ (optional)
Specifies that the corresponding string is a regular expression which the sender or subject is
matched against. If not specified, a simple string match is performed using the given string.
= (optional)
Specifies that the match against the name or subject is case sensitive. Furthermore, when regular
expression matching is not used, the name or subject must be of the same length of the string to
match. Otherwise, the match will be case insensitive, and a string may occur anywhere in the name
or subject to match.
| or & (mandatory if multiple strings)
If more than one string is specified, the set of flags corresponding to each string must be
separated by either an or operator `|' or an and operator `&'. The and operator has a higher
precedence than the or operator, e.g. a complex match expression a|b&c|d will succeed if either
of a, b&c, or d matches.
The string field in the entry is the name, subject or regular expression that will be matched against the
name or subject of each article in the group (or all groups). Colons and backslashes must be escaped
with a backslash in the string.
Example 1: Auto-select articles from `Tom Collins' (exact) on subject `News' in all groups:
:+n=&s:Tom Collins:News
Example 2: Kill all articles which are neither from `Tom' or `Eve' in some.group. Select only articles
from Eve:
some.group:~n:Tom
some.group:+n:Eve
The second example can also be written as a single entry with an or operator (in this case, the
select/kill attribute only applies to the succeeding strings):
some.group:~n|+n:Tom:Eve
To remove expired entries, to "undo" a K command, and to make the more advanced entries with more than
one string, you will have to edit the kill file manually. To recompile the file, you can use the
:compile command. When you invoke nn, it will also recompile the kill file if the compiled version is
out of date.
SHELL ESCAPES
The ! commands available in selection and reading mode are identical in operation (with one exception).
When you enter the shell escape command, you will be prompted for a shell command. This command will be
fed to the shell specified in the shell variable (default loaded from the SHELL environment variable or
/bin/sh) after the following substitutions have been performed on the command:
File name expansion
The earlier described file name expansions will be performed on all arguments.
$G will be substituted with the name of the current news group.
$L will be substituted with the last component of the name of the current news group.
$F will be substituted with the name of the current news group with the periods replaced by slashes.
$N will be substituted with the (local) article number (only defined in reading mode).
$A is replaced by the full path name of the file containing the current article (only defined in
reading mode).
% Same as $A.
$(VAR) is replaced by the string value of the environment variable VAR.
When the shell command is completed, you will be asked to hit any key to continue. If you hit the ! key
again, you will be prompted for a new shell command. Any other key will redraw the screen and return you
to the mode you came from.
Related variables: shell, shell-restrictions.
MISCELLANEOUS COMMANDS
Below are more useful commands which are available in both selection and reading modes.
U {unsub}
Unsubscribe to the current group. You will not see this group any more unless you explicitly
request it. If the variable unsubscribe-mark-read is set, all articles in the group will be
marked read when you unsubscribe.
If the variable keep-unsubscribed is not set, the group will be removed from .newsrc. If you
are not subscribing to the group, you will be given the possibility to resubscribe to the group!
This may be used in connection with the G command to resubscribe a group.
C {cancel}
Cancel (delete) an article in the current group or folder. Cancelling articles in a folder will
cause the folder to be rewritten when it is closed. In selection mode, you will be prompted for
the identifier of the article to cancel. Normal users can only cancel their own articles. See
also the section on folder maintenance.
Y {overview}
Provide an overview of the groups with unread articles.
" {layout}
Change menu layout in selection mode. The menu will be redrawn using the next layout (cycling
through ..., 2, 3, 4, 0, 1, ...)
Most of the commands in nn are bound to a key and can be activated by a single keystroke. However, there
are a few commands that cannot be bound to a key directly.
As shown in the keystroke command descriptions, all commands have a name, and it is possible to activate
a command by name with the extended command key (:). Hitting this key will prompt you for the name of a
command (and parameters). For example, an alternative to hitting the R key to reply to an article is to
enter the extended command :reply followed by return. The :post and :unshar commands described earlier
can also be bound to a key. The complete list of commands which can be bound to keys is provided in the
section on Key Mappings below.
The following extended commands cannot be bound to a key, mainly because they require additional
parameters on the prompt line, or because it should not be possible to activate them too easily.
:admin Enter administrative mode. This is identical in operation to the nnadmin(1M) program.
:bug Prepare and send a bug report to the nn-bugs mailing address.
:cd [ directory ]
Change current working directory. If the directory argument is not provided, nn will prompt for
it.
:clear Clear the screen (without redraw). This may be useful at the beginning of the init file (possibly
guarded by "on program nn"), or in some macros.
:compile
Recompile the kill file. This is not necessary under normal operation since nn automatically
compiles the file on start-up if it has changed, but it can be used if you modify the kill file
while nn is suspended.
:coredump
Abort with a core dump. For debugging purposes only.
:define macro
Define macro number macro as described in the Macro Definition section below. If macro is
omitted, the next free macro number will be chosen.
:dump table
Same as the :show command described below.
:help [ subject ]
Provide online help on the specified subject. If you omit the subject, a list of the available
topics will be given.
:load [ file ]
Load the specified file. If the file argument is omitted, the init file is reloaded. The
sequence part (if present) is ignored.
:local variable [ value ]
Make the variable local to the current group. Subsequent changes to the variable will only be
effective until the current group is left. If a value is specified, it will be assigned to the
local variable. To assign a new value to a boolean variable, the values on and off must be used.
:lock variable
Lock the specified variable so it cannot be modified.
:man Call up the online manual. The manual is presented as a normal folder with the program name in
the `From' field and the section title in the `subject' field. All the normal commands related to
a folder works for the online manual as well, e.g. you can save and print sections of the manual.
:map arguments
This is the command used for binding commands to the keys. It is fully described in the Key
Mapping section below.
:mkdir [ directory ]
Create the directory (and the directories in its path). It will prompt for at directory name if
the argument is omitted.
:motd Show the message of the day (maintained by the news administrator in the file "motd" in the lib
directory. This file is automatically displayed on start-up whenever it changes if the motd
variable is set.
:pwd Print path name of current working directory on message line.
:q Has no effect besides redrawing the screen if necessary. If an extended command (one which is
prefixed by a :) produces any output requiring the screen to be redrawn, the screen will not be
redrawn immediately if the variable delay-redraw is set (useful on slow terminals). Instead
another : prompt is shown to allow you to enter a new extended command immediately. It is
sufficient to hit return to redraw the screen, but it has been my experience that entering q
return in this situation happens quite often, so it was made a no-op.
:q! Quit nn without updating the .newsrc file.
:Q Quit nn. This is equivalent to the normal Q command.
:rmail Open your mailbox (see the mail variable) as a folder to read the incoming messages. This is not
a full mail interface (depending on the nn configuration, you may not be able to delete messages,
add cc: on replies, etc), but it can give you a quick glance at new mail without leaving nn.
:set variable [ value ]
Set a boolean variable to true or assign the value to a string or integer variable. The :set
command is described in details in the section on VARIABLES.
:sh Suspend nn, or if that is not possible, spawn an interactive shell.
:show groups mode
Show the total number or the number of unread articles in the current group, depending on mode:
all (list the number of unread articles in all groups including groups which you have unsubscribed
to), total (list the total number of articles in all existing groups), sequence (list unread
groups in presentation sequence order), subscr (list all subscribed groups), unsub (list
unsubscribed groups only). Any other mode results in a listing of the number of unread articles
in all subscribed groups including those you have suppressed with the `!' symbol in the group
presentation sequence. To get just the currently unread groups in the presentation sequence, use
the `Y' {overview} command.
:show kill
Show the kill entries that applies to the current group and to all groups.
:show rc [ group ]
Show the .newsrc and select file entries for the current or the specified group.
:show map [ mode ]
Show the key bindings in the current or specified mode.
:sort [ mode ]
Reorder the articles on the menu according to mode or if omitted to the default sort-mode. The
following sorting modes are available:
arrival: list articles by local article number which will be the same as the order in which they
arrived on the system (unless groups are merged),
subject: articles with identical subjects are grouped and ordered after age of the oldest article
in the group,
lexical: subjects in lexicographical order,
age: articles ordered after posting date only,
sender: articles ordered after sender's name.
:toggle variable
Toggle a boolean variable.
:unread [ group ] [ articles ]
Mark the current (or specified) group as unread. If the articles argument is omitted, the number
of unread articles in the group will be set to the number of unread articles when nn was invoked.
Otherwise, the argument specifies the number of unread articles.
:unset variable
Set a boolean variable to false or clear an integer variable.
:x Quit nn and mark all articles in the current group as read!
Related variables: backup, bug-report-address, delay-redraw, keep-unsubscribed, unsubscribe-mark-read,
mail, pager, sort-mode.
CATCH UP
If you have not read news for some time, there are probably more news than you can cope with. Using the
option -a0 nn will put you into catch-up mode.
The first question you will get is whether to catch up interactively or automatically. If you instruct
nn to catch up automatically, it will simply mark all articles in all groups as read, thus bringing you
completely up-to-date.
If you choose the interactive mode, nn will locate all groups with unread articles, and for each group it
will prompt you for an action to take on the group. An action is selected using a single letter followed
by return. The following actions are available:
y Mark all articles as read in current group.
n Do not update group (this is the default action if you just hit return).
r Enter reading mode to read the group.
U Unsubscribe to the group.
? Give a list of actions.
q Quit. When you quit, nn will ask whether the rest of the groups should be updated unconditionally
or whether they should remain unread.
VARIABLES AND OPTIONS
It is possible to control the behaviour of nn through the setting (and unsetting) of the variables
described below. There are several ways of setting variables:
- Through command line options when nn is invoked.
- Through assignments on the command line when nn is invoked.
- Through global set commands in the init file.
- Through set or local commands executed from entry macros.
- Through the :set extended command when you run nn.
There are four types of variables:
- Boolean variables
- Integer variables
- String variables
- Key variables
Boolean variables control a specific function in nn, e.g. whether the current time is shown in the
prompt line. A boolean variable is set to true with the command
set variable
and it is set to false with either of the following (equivalent) commands:
unset variable
set novariable
You can also toggle the value of a boolean variable using the command:
toggle variable
For example:
set time
unset time
set notime
toggle time
Integer variables control an amount e.g. the size of the preview window, or the maximum number of
articles to read in each group. They are set with the following command:
set variable value
In some cases, not setting an integer value has a special meaning, for example, not having a minimal
preview window or reading all articles in the groups no matter how many there are. The special meaning
can be re-established by the following command:
unset variable
For example:
set window 7
unset limit
String variables may specify directory names, default values for prompts, etc. They are set using the
command
set variable string
Normally, the string value assigned to the variable value starts at the first non-blank character after
the variable name and ends with the last non-blank character (excluding comments) on the line. To
include leading or trailing blanks, or the comment start symbol, #, in the string they must be escaped
using a backslash `\', e.g. to set included-mark to the string " # ", the following assignment can be
used:
set included-mark \ \#\ # blank-#-blank
To include a backslash in the string, it must be duplicated `\\'. A backslash may also be used to
include the following special characters in the string: \a=alarm, \b=backspace, \e=escape, \f=form-feed,
\n=new-line, \r=return, \t=tab.
Key variables control the keys used to control special functions during user input such as line editing
and completion. They are set using the command
set variable key-name
A variable can be locked which makes further modification of the variable impossible:
lock variable
This can be used in the setup init file which is loaded unconditionally to enforce local conventions or
restrictions. For example, to fix the included-mark variable to the string ">", the following commands
can be placed in the setup file:
set included-mark >
lock included-mark
Some variables only make sense when set on the command line, since they are examined early in startup,
before the init files are read. The syntax for setting variables on the command line is:
variable=value
The value may need to be quoted if it contains white space or special characters. They can be intermixed
with other options, and are examined prior to other argument parsing.
The current variable settings can be shown with the :set command:
:set (without arguments)
This will give a listing of the variables which have been set in either the init file or
interactively.
:set all
This will give a listing of all variables. Modified variables will be marked with a `*' and local
variables will be marked with a `>'. A locked variable is marked with a `!'.
:set /regexp
This will give a listing of all variables whose name matches the given regular expression.
:set partial-name space
The space (comp1-key) key will complete the variable name as usual, but as a side effect it will
display the variable's current value in the message line.
Variables are global by default, but a local instantiation of the variable can be created using the
:local command. The local variable will overlay the global variable as long as the current group is
active, i.e. the global variable will be used again when you exit the current group. The initial value
of the local variable will be the same as the global variable, unless a new value is specified in the
:local command:
:local variable [ value ]
The following variables are available:
also-full-digest (boolean, default false)
When a digest is split, the digest itself is not normally included on the menu, and as such the
initial administrative information is not available. Setting also-full-digest will cause the
(unsplit) digest to be included on the menu. These articles are marked with a @ at the beginning
of the subject.
also-subgroups (boolean, default true)
When set, a group name in the presentation sequence will also cause all the subgroups of the group
to be included, for example, comp.unix will also include comp.unix.questions, etc. When also-
subgroups is not set, subgroups are only included if the group name is followed by a `.' in which
case the main group is not included, i.e. `comp.unix' is not included when `comp.unix.' is
specified in the presentation sequence, and vice-versa. Following a group name by an asterisk
`*', e.g. comp.unix*, will include the group as well as all subgroups independently of the setting
of also-subgroups.
append-signature-mail (boolean, default false)
When false, it is assumed that the .signature file is automatically appended to responses sent via
E-mail. If true, .signature will be appended to the letter (see query-signature).
append-signature-post (boolean, default false)
When false, it is assumed that the .signature file is automatically appended to posted articles.
If true, .signature will explicitly be appended to posted articles (see query-signature).
attributes symbols (string, default ....)
Each element in this string represents a symbol used to represent an article attribute when
displayed on the screen. See the section on Marking Articles and Attributes.
auto-junk-seen (boolean, default true)
When set, articles which have the seen attribute (,) will be marked read when the current group is
left. If not set, these articles will still be either unread or marked seen the next time the
group is entered (see also confirm-junk-seen and retain-seen-status).
auto-preview-mode (boolean, default false)
Enables Auto Preview Mode. In this mode, selecting an article on the menu using its article id
(letter a-z) will enter preview mode on that article immediately. Furthermore, the `n' {next-
article} command will preview the next article on the menu only if it has the same subject as the
current article; otherwise, it will return to the menu with the cursor placed on the next article.
The continue command at the end of the article and the `=' {goto-menu} returns to the menu
immediately as usual.
auto-read-mode-limit N (integer, default 0)
When operating in auto reading mode, nn will auto-select all unread articles in the group, skip
the article selection phase, and enter reading mode directly after entry to the group.
Auto reading mode is disabled when auto-read-mode-limit is zero; it is activated unconditionally
if the value is negative, and conditionally if the value is greater than zero and the number of
unread articles in the current group does not exceed the given value.
auto-select-closed mode (integer, default 1)
Normally, selecting a closed subject (usually in consolidated menu mode) will select (or deselect)
all unread articles with the given subject (or all articles if they are all read). This behaviour
can be changed via the value of this variable as follows:
0: select only the first article with the subject (shown on menu).
1: select only the unread articles with the subject.
2: select all available articles with the subject.
auto-select-rw (boolean, default false)
If set, a subject of an article read or posted is automatically used for subsequent auto-selecting
(if not already selected). This is the most efficient way to see your own posts automatically.
auto-select-subject (boolean, default false)
When set, selecting an article from the menu using the article id (a-z), all articles on the menu
with the same subject will automatically be selected as well.
backup (boolean, default true)
When set, a copy of the initial .newsrc and select files will save be the first time they are
changed. nn remembers the initial contents of these files internally, so the backup variable can
be set any time if not set on start-up.
backup-folder-path file (string, default "BackupFolder~")
When removing deleted articles from a folder, this variable defines the name of the file where a
(temporary) copy of the original folder is saved. If the file name doesn't contain a `/', the
file will be located in the .nn directory. Otherwise the file name is used directly as the
relative or full path name of the backup file. If possible, the old folder will be renamed to the
backup folder name; otherwise the old folder is copied to the backup folder.
backup-suffix suffix (string, default ".bak")
The suffix appended to file names to make the corresponding backup file name (see backup).
bug-report-address address (string, default mtpins@nndev.org)
The mail address to which bug reports created with the :bug command are sent.
case-fold-search (boolean, default true)
When set, string and regular expression matching will be case independent. This is related to all
commands matching on names or subjects, except in connection with auto-kill and auto-select where
the individual kill file entries specifies this property.
charset charset (string, default "us-ascii")
The character set in use on your terminal. Legal values are "us-ascii", "iso-8859-X", where X is a
nonzero digit, and "unknown". Setting this variable also sets the data-bits variable to the
default bit width of the character set (7 for "us-ascii" and "unknown", 8 for the "iso-8859-X"
sets).
The value of this variable also determines whether nn allows 8-bit characters in the body of
articles being posted and letters being mailed (unless the value is "unknown", in which case this
is determined by the value of the data-bits variable). If necessary, nn will add extra headers to
the message indicating its the character set.
check-group-access (boolean, default false)
When set, nn will perform a check on the readability of a group's readability before showing the
menu for that group. Normally, this is not necessary since all users traditionally have access to
all news groups. Setting (and locking) this variable may be used to limit access to a news group
via the permissions and ownership of the group's spool directory (this will only work for non-NNTP
sites).
collapse-subject offset (integer, default 25)
When set (non-negative), subject lines which are too long to be presented in full on the menus
will be "collapsed" by removing a sufficient number of characters from the subject starting at the
given offset in the subject. This is useful in source groups where the "Part (01/10)" string
sometimes disappears from the menu. When not set (or negative), the subjects are truncated.
columns col (integer, default screen width)
This variable contains the screen width i.e. character positions per line.
comp1-key key (key, default space)
The key which gives the first/next completion, and the default value when nn is prompting for a
string, e.g. a file name.
comp2-key key (key, default tab)
The key which ends the current completion and gives the first completion for the next component
when nn is prompting for a string, e.g. a file name.
compress (boolean, default false)
This variable controls whether text compression (see the compress command) is turned on or off
when an article is shown. The compression is still toggled for the current article with the
compress command key.
confirm-append (boolean, default false)
When set, nn will ask for confirmation before appending an article to an existing file (see also
confirm-create).
confirm-auto-quit (boolean, default false)
When set, nn will ask for confirmation before quitting after having read the last group. If not
confirmed, nn will recycle the presentation sequence looking for groups that were skipped with the
`N' {next-group} command. But it will not look for new articles arrived since the invocation of
nn.
confirm-create (boolean, default true)
When set, nn will ask for confirmation before creating a new file or directory when saving or
unpacking an article (see also confirm-append).
confirm-entry (boolean, default false)
When set, nn will ask for confirmation before entering a group with more than confirm-entry-limit
unread articles (on the first menu level). It is useful on slow terminals if you don't want to
wait until nn has drawn the first menu to be able to skip the group.
Answering no to the "Enter?" prompt will cause nn to skip to the next group without marking the
current group as read. If you answer by hitting interrupt, nn will ask the question "Mark as
read?" which allows you to mark the current group as read before going to the next group. If this
second question is also answered by hitting interrupt, nn will quit immediately.
confirm-entry-limit articles (integer, default 0)
Specifies the minimum number of unread articles in a group for which the confirm-entry
functionality is activated.
confirm-junk-seen (boolean, default false)
When set, nn will require confirmation before marking seen articles as read when auto-junk-seen is
set.
confirm-messages (boolean, default false)
In some cases, nn will sleep one second (or more) when it has shown a message to the user, e.g. in
connection with macro debugging. Setting confirm-messages will cause nn to wait for you to
confirm all messages by hitting any key. (It will show the symbol <> to indicate that it is
awaiting confirmation.)
consolidated-manual (boolean, default false)
When set, the online manual will be presented with one menu line for each program in the nn
package.
consolidated-menu (boolean, default false)
When set, nn will automatically close all multi-article subjects on entry to a group, so that each
subject only occur once on the menu page.
counter-delim-left (string, default "[")
The delimiter string output to the left of the article counter in a closed subject's menu line.
counter-delim-right (string, default "] ")
The delimiter string output to the right of the article counter in a closed subject's menu line.
counter-padding pad (integer, default 5)
On a consolidated menu, the subjects may not be very well aligned because the added [...] counters
have varying length. To (partially) remedy this, all counters (and subjects without counters) are
prefixed by up to pad spaces to get better alignment. Increasing it further may yield practically
perfect alignment at the cost of less space for the subject itself.
cross-filter-seq (boolean, default true)
When set, cross posted articles will be presented in the first possible group, i.e. according to
the current presentation sequence (cross-post filtering on sequence). The article is
automatically marked read in the other cross posted groups unless you unsubscribe to the first
group in which it was shown before reading the other groups. Likewise, it is sufficient to leave
the article unread in the first group to keep it for later handling.
If not set, cross-postings are shown in the first group occurring on the Newsgroups: line which
the user subscribes to (i.e. you let the poster decide which group is most appropriate to read his
posting).
cross-post (boolean, default false)
Normally, nn will only show cross-posted articles in the first subscribed group on the Newsgroups:
line. When cross-post is set, nn will show cross-posted articles in all subscribed groups to
which they are posted.
cross-post-limit N (integer, default 0)
If this variable is set to a value other than 0, then any articles posted to more than N
newsgroups are automatically skipped. A value of 5 is pretty good for discarding ``spam''
articles.
data-bits bits (integer, default 7)
When set to 7, nn will display characters with the 8th bit set using a meta-notation M-7bit-char.
If set to 8, these characters are sent directly to the screen (unless monitor is set). Setting the
charset variable also sets this variable to the default bit width of character set.
It also controls whether keyboard input is 7 or 8 bits, and thus whether key maps contain 127 or
255 entries. See the key mapping section for more details.
If the charset has value "unknown", the value of data-bits also determines whether nn allows 8-bit
characters in the body of articles being posted and letters being mailed (this is normally
determined directly by the charset variable).
date (boolean, default true)
If set nn will show the article posting date when articles are read.
debug mask (integer, default 0)
Look in the source if you are going to use this.
decode-header-file file (string, default "Decode.Headers")
The name of the file in which the header and initial text of articles decoded with the :decode
command is saved. Unless the file name starts with a `/', the file will be created in the same
directory as the decoded files. The information is not saved if this variable is not set.
decode-skip-prefix N (integer, default 2)
When non-null, the :decode command will automatically skip up to N characters at the beginning of
each line to find valid uuencoded data. This allows nn to automatically decode (multi-part)
postings which are both uuencoded and packed with shar.
default-distribution distr (string, default "world")
The distribution to use as the default suggestion when posting articles using the follow and post
commands if the corresponding follow-distribution or post-distribution variable contains the
default option.
default-kill-select [1]days (number, default 30)
Specifies the default action for the K {kill-select} command if the first prompt is answered by
return. It contains the number of days to keep the kill or select entry in the kill file (1-99
days). If it has the value days+100 (e.g. 130), it denotes that the default action is to select
rather than kill on the subject for the specified period.
default-save-file file (string, default +$F)
The default save file used when saving articles in news groups where no save file has been
specified in the init file (either in a save-files section or in the presentation sequence). It
can also be specified using the abbreviation "+" as the file name when prompted for a file name
even in groups with their own save file.
delay-redraw (boolean, default false)
Normally, nn will redraw the screen after extended commands (:cmd) that clear the screen. When
delay-redraw is set nn will prompt for another extended command instead of redrawing the screen
(hit return to redraw).
echo-prefix-key (boolean, default true)
When true, hitting a prefix key (see the section on key mapping below) will cause the prefix key
to be echoed in the message line to indicate that another key is expected.
edit-patch-command (boolean, default true)
When true, the :patch command will show the current patch-command and give you a chance to edit it
before applying it to the articles.
edit-print-command (boolean, default true)
When true, the print command will show the current printer command and give you a chance to edit
it before printing the articles. Otherwise the articles are just printed using the current
printer command.
edit-response-check (boolean, default true)
When editing a response to an article, it normally does not have any meaning to send the initial
file prepared by nn unaltered, since it is either empty or only contains included material. When
this variable is set, exiting the editor without having changed the file will automatically abort
the response action without confirmation.
edit-unshar-command (boolean, default false)
When true, the :unshar command will show the current unshar-command and give you a chance to edit
it before applying it to the articles.
editor command (string, default not set)
When set, it will override the current EDITOR environment variable when editing responses and new
articles.
embedded-header-escape string (string, default '~')
When saving an article to a file, header lines embedded in the body of the article are escaped
using this string to make it possible for nn to split the folder correctly afterwards. Header
lines are not escaped if this variable is not set.
enter-last-read-mode mode (integer, default 1)
Normally, nn will remember which group is active when you quit, and offer to jump directly to this
group when you start nn the next time. This variable is used to control this behaviour. The
following mode values are recognized:
0: Ignore the remembered group (r.g.).
1: Enter r.g. if the group is unread (with user confirmation)
2: Enter r.g. or first unread group after it in the sequence (w/conf).
3: Enter r.g. if the group is unread (no confirmation)
4: Enter r.g. or first unread group after it in the sequence (no conf).
entry-report-limit articles (integer, default 300)
Normally, nn will just move the cursor to the upper left corner of the screen while it is reading
articles from the database on entry to a group. For large groups this may take more than a
fraction of a second, and nn can then report what it is doing. If it must read more articles than
the number specified by this variable, nn will report which group and how many articles it is
reading.
erase-key key (key, default tty erase key)
The key which erases the last input character when nn is prompting for a string, e.g. a file name.
expert (boolean, default false)
If set nn will use slightly shorter prompts (e.g. not tell you that ? will give you help), and be
a bit less verbose in a few other cases (e.g. not remind you that posted articles are not
available instantly).
expired-message-delay pause (integer, default 1)
If a selected article is found to have been expired, nn will normally give a message about this
and sleep for a number of seconds specified by this variable. Setting this variable to zero will
still make nn give the message without sleeping afterwards. Setting it to -1 will cause the
message not to be shown at all.
flow-control (boolean, default true)
When set, nn will turn on xon/xoff flow-control before writing large amounts of text to the
screen. This should guard against lossage of output, but in some network configurations it has
had the opposite effect, losing several lines of the output. This variable is always true on
systems with CBREAK capabilities which can do single character reads without disabling flow
control.
flush-typeahead (boolean, default false)
When true, nn will flush typeahead prior to reading commands from the keyboard. It will not flush
typeahead while reading parameters for a command, e.g. file names etc.
folder directory (string, default ~/News)
The full pathname of the folder directory which will replace the + in folder names. It will be
initialized from the FOLDER environment variable if it is not set in the init file.
folder-format-check (boolean, default true)
When saving an article with a full or partial header in an existing folder, nn will check the
format of the folder to be able to append the article in the proper format. If this variable is
not set, folders are assumed to be in the format specified via the mmdf-format and mail-format
variables, and articles are saved in that format without checking. Otherwise, the *-format
variables are only used to determine the format for new folders.
folder-save-file file (string, default not set)
The default save file used when saving articles from a folder.
follow-distribution words (string, default see below)
This variable controls how the Distribution: header is constructed for a follow-up to an original
article. Its value is a list of words selected from the following list:
[ [ always ] same ] [ ask ] [ default | distribution ]
This is interpreted in two steps:
- First the default distribution is determined. If same is specified and the original article has
a Distribution: header, that header is used. Else if default is specified (or distribution is
omitted), the value of default-distribution is used. And finally, if only a distribution (any
word) is specified that is used as the default.
- Then if ask is specified, the user will be asked to confirm the default distribution or provide
another distribution. However, if always (and same) is specified, and the default was taken from
the original article's distribution, the original distribution is used without confirmation.
The default value of follow-distribution is always same default, i.e. use either the original
distribution or the default-distribution without confirmation in either case.
from-line-parsing strictness (integer, default 2)
Specifies how strict nn must parse a "From " line in a folder to recognize it as a mail format
message separator line. The following strictness values determine whether a line starting with
"From " will be recognized as a separator line:
0: Always.
1: Line must have at least 8 fields.
2: Line must contain a valid date and time (ctime style).
fsort (boolean, default true)
When set, folders are sorted alphabetically according to the subject (and age). Otherwise, the
articles in a folder will be presented in the sequence in which they were saved.
guard-double-slash (boolean, default false)
Normally, when entering a file name, entering two slashes `//' in a row (or following a slash by a
plus `/+') will cause nn to erase the entire line and replace it with the `/' (or `+'). On some
systems, two slashes are used in network file names, and on those systems guard-double-slash can
be set; that will cause nn to require three slashes in a row to clear the input.
header-lines list (string, no default)
When set, it determines the list of header fields that are shown when an article is read instead
of the normal one line header showing the author and subject. See the full description in the
section on Customized Article Headers below.
help-key key (key, default ?)
The key which ends the current completion and gives a list of possible completions for the next
component when nn is prompting for a string, e.g. a file name.
ignore-re (boolean, default false)
If set, articles with subjects already seen in a previous invocation of nn or another newsreader -
and not auto-selected - are automatically killed. A great way to read even less news!
ignore-xon-xoff (boolean, default false)
Normally, nn will ignore ^S and ^Q in the input from the terminal (if they are not handled in the
tty driver). Setting this variable will treat these characters as normal input.
include-art-id (boolean, default false)
The first line in a response with included material normally reads "...somebody... writes:"
without a reference to the specific article from which the quotation was taken (this is found in
the References: line). When this variable is set, the line will also include the article id of
the referenced article: "In ...article... ... writes:".
include-full-header (boolean, default false)
When set, the mail (M) command will always include the full header of the original article. If it
is not set, it only includes the header when the article is forwarded without being edited.
include-mark-blank-lines (boolean, default false)
When set, the included-mark is placed on blank lines in included articles. Otherwise, blank lines
are left blank (to make it easy to delete whole paragraphs with `d}' in vi and `C-@ M-] C-W' in
emacs).
included-mark string (string, default ">")
This string is prefixed to all lines in the original article that are included in a reply or a
follow-up. (Now you have the possibility to change it, but please don't. Lines with a mixture of
prefixes like
: orig-> <> } ] #- etc.
are very difficult to comprehend. Let's all use the standard folks! (And hack inews if it is the
50% rule that bothers you.)
inews shell-command (string, default "INEWS_PATH -h")
The program which is invoked by nn to deliver an article to the news transport. The program will
be given a complete article including a header containing the newsgroups to which the article is
to be posted. See also inews-pipe-input. It is not used when cancelling an article!
inews-pipe-input (boolean, default true)
When set, the article to be posted will be piped into the inews program. Otherwise, the file
containing the article will be given as the first (and only) argument to the inews command.
initial-newsrc-file file (string, default '.defaultnewsrc')
Defines the name of a file which is used as the initial .newsrc file for new users. The name may
be a full path name, or as the default a file name which will be looked for in a number of places:
in the standard news lib directory (where it can be shared with other news readers), in nn's lib
directory, and in the database directory. Groups which are not present in the initial .newsrc
file will be automatically unsubscribed provided new-group-action is set to a value allowing
unsubscribed groups to be omitted from .newsrc.
keep-backup-folder (boolean, default false)
When set, the backup folder (see backup-folder-path) created when removing deleted articles from a
folder is not removed. Notice that a backup folder is not created if all articles are removed
from a folder!
keep-unsubscribed (boolean, default true)
When set, unsubscribed groups are kept in .newsrc. If not set, nn will automatically remove all
unsubscribed from .newsrc if tidy-newsrc is set. See also unsubscribe-mark-read.
kill (boolean, default true)
If set, nn performs automatic kill and selection based on the kill file.
kill-debug (boolean, default false)
When set, nn will display a trace of the auto-kill/select process on entry to a group. It is
automatically turned off if `q' is entered as the answer to a "hit any key" prompt during the
debug output.
kill-key key (key, default tty kill key)
The key which deletes the current line when nn is prompting for a string, e.g. a file name.
kill-reference-count N (integer, default 0)
When this variable is non-zero, all articles which have N or more references on the References:
line (corresponding to the number of >>'s on the menu line) will be auto-killed if they are not
auto-selected (or preserved) via an entry in the kill file. It should probably not be used
globally for all groups, but can be set on a per-group via the entry macros.
layout number (integer, default 1)
Set the menu layout. The argument must be a number between 0 and 4.
limit max-articles (integer, default infinite)
Limit the maximum number of articles presented in each group to max-articles. The default is to
present all unread articles no matter how many there are. Setting this variable, only the most
recent max-articles articles will be presented, but all the articles will still be marked as read.
This is useful to get up-to-date quickly if you have not read news for a longer period.
lines lin (integer, default screen height)
This variable contains the screen height i.e. number of lines.
long-menu (boolean, default false)
If set nn will not put an empty line after the header line and an empty line before the prompt
line; this gives you two extra menu lines.
macro-debug (boolean, default false)
If set nn will trace the execution of all macros. Prior to the execution of each command or
operation in a macro, it will show the name of the command or the input string or key stroke at
the bottom of the screen.
mail file (string, default not set)
file must be a full path name of a file. If defined, nn will check for arrival of new mail every
minute or so by looking at the specified file.
mail-alias-expander program (string, default not set)
When set, aliases used in mail responses may be expanded by the specified program. The program
will be given the completed response in a file as its only argument, and the aliases should be
expanded directly in this file (of course the program may use temporary files and other means to
expand the aliases as long the the result is stored in the provided file).
Notice: currently there are no alias expanders delivered with nn.
Warning: Errors in the expansion process may lead to the response not being sent.
mail-format (boolean, default false)
When set, nn will save articles in a format that is compatible with normal mail folders. Unless
folder-format-check is false, it is only used to specify the format used when new folders are
created. This variable is ignored if mmdf-format is set.
mail-header headers (string, default not set)
The headers string specifies one or more extra header lines (separated by semi-colons `;') which
are added to the header of mail sent from nn using the reply and mail commands. For example:
set mail-header Reply-To: storm@texas.dk;Organization: TI - DK
To include a semicolon `;' in a header, precede it by a backslash (which must be doubled because
of the conventions for entering strings).
mail-record file (string, default not set)
file must be a full path name of a file. If defined, all replies and mail will be saved in this
file in standard mailbox format, i.e. you can use you favourite mailer (and nn) to look at the
file.
mail-script file (string, default not set)
When set, nn will use the specified file instead of the standard aux script when executing the
reply and mail commands.
mailer shell-command (string, default REC_MAIL)
The program which is invoked by nn to deliver a message to the mail transport. The program will
be given a complete mail message including a header containing the recipient's address. See also
mailer-pipe-input.
mailer-pipe-input (boolean, default true)
When set, the message to be sent will be piped into the mailer program. Otherwise, the file
containing the message will be given as the first (and only) argument to the mailer command.
marked-by-next-group N (integer, default 0)
Specifies the amount of (unmarked) articles on the menu marked seen by the N {next-group} command
in selection mode. See marked-by-read-skip for possible values of N.
marked-by-read-return N (integer, default 0)
Specifies the amount of (unmarked) articles on the menu marked seen by the Z {read-return} command
in selection mode. See marked-by-read-skip for possible values of N.
marked-by-read-skip N (integer, default 4)
Specifies the amount of (unmarked) articles on the menu marked seen by the X {read-skip} command
in selection mode. The following values of N are recognized:
0: No articles are marked seen
1: Current page is marked seen
2: Previous pages are marked seen
3: Previous and current pages are marked seen
4: All pages are marked seen
mark-overlap (boolean, default false)
When set, nn will draw a line (using the underline capabilities of the terminal if possible) to
indicate the end of the overlap (see the overlap variable).
mark-overlap-shading (boolean, default false)
When set, nn will shade overlapping lines (see the overlap variable) using the attributes defined
by the shading-on and shading-off variables (of if not set, with the underline attribute). This
is typically used to give overlapping lines a different colour on terminals which have this
capability.
menu-spacing mode (integer, default 0)
When mode is a non-zero number as described below, nn will add blank lines between the lines on
the menu to increase readability at the cost of presenting fewer articles on each page. The
following values of mode are recognized:
0: Don't add blank lines between menu lines.
1: Add a blank line between articles with different subjects.
2: Add a blank line between all articles.
merge-report-rate rate (integer, default 1)
When nn is invoked with the -m option (directly or via nngrap), a status report of the merging
process is displayed and updated on the screen every rate seconds. The report contains the time
used so far and an estimate of the time needed to complete the merge.
message-history N (integer, default 15)
Specifies the maximum number, N, of older messages which can be recalled with the ^P {message}
command.
min-window size (integer, default 7)
When the window variable is not set, nn will clear the screen to preview an article if there are
less than size unused lines at the bottom of the menu screen.
mmdf-format (boolean, default false)
When set, nn will save articles in MMDF format. Unless folder-format-check is false, it is only
used to specify the format used when new folders are created.
monitor (boolean, default false)
When set, nn will show all characters in the received messages using a "cat -v" like format.
Otherwise, only the printable characters are shown (default).
motd (boolean, default true)
When set, nn will display the message of the day on start-up if it has changed since it was last
shown. The message is taken from the file "motd" in the lib directory. It can also be shown
(again) using the :motd command.
multi-key-guard-time timeout (integer, default 2)
When reading a multi-key sequence from the keyboard, nn will expect the characters constituting
the multi-key to arrive "quickly" after each other. When a partial multi-key sequence is read, nn
will wait (at least) timeout tenths of a second for each of the following characters to arrive to
complete the multi-key sequence. If the multi-key sequence is not completed within this period,
nn will read the partial multi-key sequence as individual characters instead. This way it is
still possible to use for example the ESC key on a terminal with vt100 like arrow keys. When nn
is used via an rlogin connection, you may have to increase the timeout to get reliable recognition
of multi-keys.
new-group-action action (integer, default 3)
This variable controls how new groups are treated by nn. It is an integer variable, and the
following values can be used. Some of these actions (marked with an *) will only work when keep-
unsubscribed is set, since the presence of a group in .newsrc is the only way to recognize it as
an old group:
0) Ignore groups which are not in .newsrc. This will obviously include new groups, and therefore
you must explicitly add any new groups that you care about (by editing the .newsrc file, or using
the G menu command and then subscribing to the group). When NNTP is being used, this setting
prevents the active.times data from being read from the server; this can be helpful when using a
slow link, since the data can often be hundreds of KBytes long.
1*) Groups not in .newsrc are considered to be new, and are inserted at the beginning of the
.newsrc file.
2*) Groups not in .newsrc are considered to be new, and are appended to the end of the .newsrc
file.
3) New groups are recognized via a time-stamp saved in the file .nn/LAST and in the database,
i.e. it is not dependent on the groups currently in .newsrc. The new groups are automatically
appended to .newsrc with subscription. Old groups not present in .newsrc will be considered to be
unsubscribed.
4) As 3, but the user is asked to confirm that the new group should be appended to .newsrc. If
rejected, the group will not be appended to .newsrc, and thus be regarded as unsubscribed.
5) As 4, except that the information is stored in a format compatible with the rn news reader
(.rnlast). This needs to be tested!
new-style-read-prompt (boolean, default true)
When set, the reading mode prompt line includes the group name and the number of selected articles
in the group.
news-header headers (string, default not set)
The headers string specifies one or more extra header lines (separated by semi-colons `;') which
are added to the header of articles posted from nn using the follow and post commands. See mail-
header for an example.
news-record file (string, default not set)
Save file for follow-ups and postings. Same rules and format as the mail-record variable.
news-script file (string, default not set)
When set, nn will use the specified file instead of the standard aux script when executing the
follow and post commands.
newsrc file (string, default "~/.newsrc") Specifies the
file used by nn to register which groups and articles have been read. The default setting
corresponds to the .newsrc file used by other news readers. Notice that nn release 6.4 onwards
does allow individual articles to be marked unread, and some articles marked unread, and thus no
longer messes up .newsrc for other news readers! Also see nntp-server.
nn-directory directory (string, default "~/.nn")
It only makes sense to set this variable on the command line, e.g. "nn-directory=$HOME/.nn2" since
it is looked at before the init file is read. It must be set to a full pathname. Usually set
when using multiple servers; see newsrc above and nntp-server below.
nntp-cache-dir directory (string, default "~/.nn")
When NNTP is used, nn needs to store articles temporarily on disk. This variable specifies which
directory nn will use to hold these files. The default value may be changed during configuration.
This variable can only be set in the init file.
nntp-cache-size size (integer, default 10, maximum 10)
Specifies the number of temporary files in the nntp cache. The default and maximum values may be
changed during configuration.
nntp-debug (boolean, default false)
When set, a trace of the nntp related traffic is displayed in the message line on the screen.
nntp-server hostname or filename (string)
It only makes sense to set this variable on the command line, e.g. "nntp-server=news.some.domain",
since it is looked at before the init file, If you use multiple servers, you probably want to set
the nn-directory and newsrc variables on the command line to alternate names as well, since some
of the data files are server dependent.
old [max-articles] (integer, default not set)
When old is set, nn will present (or scan) all (or the last max-articles) unread as well as read
articles. While old is set, nn will never mark any unread articles as read.
old-packname (boolean, default false)
When set, nn display names identically to nn-6.6.5 (and earlier). Only set this if you have a
large number of entries in your killfile that no longer work due to the new behaviour. Note that
in the long run, this option will go away, so it's best to update your killfile rather than set
this.
orig-to-include-mask N (integer, default 3)
When replying to an article, nn will include some of the header lines which may be used to
construct a proper mail address for the poster of the original article. These addresses are
placed on Orig-To: lines in the reply header and will automatically be removed before the letter
is sent. This variable specifies which headers from the article are included; its value N is the
sum of the following values:
1: Reply-To:
2: From:
4: Path:
overlap lines (integer, default 2)
Specifies the number of overlapping lines from one page to the next when paging through an article
in reading mode. The last line from the previous page will be underlined if the terminal has that
capability.
pager shell-command (string, default $PAGER)
This is the pager used by the :admin command (and nnadmin) when it executes certain commands, e.g.
grepping in the Log file.
patch-command shell-command (string, default "patch -p0")
This is the command which is invoked by the :patch command.
post-distribution words (string, default see below)
This variable controls how the Distribution: header is constructed when posting an original
article. Its value is a list of words selected from the following list:
[ ask ] [ default | distribution ]
This is interpreted in two steps:
- First the default distribution is determined. If default is specified (or distribution is
omitted), the value of default-distribution is used. Otherwise, the specified distribution (any
word) is used as the default.
- Then if ask is specified, the user will be asked to confirm the default distribution or provide
another distribution.
The default value of post-distribution is ask default, i.e. use the default-distribution with
confirmation from the user.
preview-continuation cond (integer, default 12)
This variable determines on what terms the following article should be automatically shown when
previewing an article, and the next-article command is used, or continue is used at the end of the
article. The following values can be used:
0 - never show the next article (return to the menu).
1 - always show the next article (use 'q' to return to the menu).
2 - show the next article if it has the same subject as the current article, else return to the
menu.
The value should be the sum of two values: one for the action after using continue on the last
page of the article, and one for the action performed when the next-article command is used
multiplied by 10.
preview-mark-read (boolean, default true)
When set, previewing an article will mark the article as read.
previous-also-read (boolean, default true)
When set, going back to the previously read group with P {previous} will include articles read in
the current invocation of nn even if there are still unread articles in the group.
print-header-lines fields (string, default "FDGS")
Specifies the list of header fields that are output when an article is printed via the :print
command and print-header-type is 1 (short header). The fields specification is described in the
section on Customized Article Headers below.
print-header-type N (integer, default 1)
Specifies what kind of header is printed by the :print command, corresponding to the three save-*
commands: 0 prints only the article body (no header), 1 prints a short header, and 2 prints the
full article header.
printer shell-command (string, default is system dep.)
This is the default value for the print command. It should include an option which prevents the
spooler from echoing a job-id or similar to the terminal to avoid problems with screen handling
(e.g. lp -s on System V).
query-signature (boolean, default ...)
Will cause nn to require confirmation before appending the .signature file to out-going mail or
news if the corresponding append-sig-... variable is set.
quick-count (boolean, default true)
When set, calculating the total number of unread articles at start-up is done by simple
subtracting the first unread article number from the total number of articles in each group. This
is very fast, and fairly accurate but it may be a bit too large. If not set, each line in .newsrc
will be interpreted to count every unread article, thus giving a very accurate number. This
variable is also used by nncheck.
quick-save (boolean, default false)
When set, nn will not prompt for a file name when an article is saved (unless it belongs to a
folder). Instead it uses the save file specified for the current group in the init file or the
default save file.
re-layout N (integer, default 0)
Normally on the menu, nn will prefix the subject a number of `>'s corresponding to the number of
references on the References: line. The re-layout variable may be set to use a different prefix
on the subjects:
0: One `>' per reference is shown (default).
1: A single `>' is shown if the Subject contains Re:.
2: The number of references is shown as `n>'
3: A single Re: is shown.
4: If any references use layout 0, else layout 1.
re-layout-read N (integer, default -1)
When the header-lines variable is not set, or contains the "*" field specifier, a line similar to
the menu line will be used as the header of the article in reading mode, including the sender's
name and the article's subject. When this variable is negative, the subject on this header line
will be prefixed according to the re-layout variable. Otherwise, it will define the format of the
"Re:" prefix to be used instead of the re-layout used on the menu.
read-return-next-page (boolean, default false)
When set, the Z {read-return} command will return to the next menu page rather than the current
menu page.
record file (string, no default)
Setting this pseudo variable will set both the mail-record and the news-record variables to the
specified pathname.
repeat (boolean, default false)
When set, nn will not eliminate duplicated subject lines on menus (I cannot imagine why anyone
should want that, but....)
repeat-group-query (boolean, default false)
When set, invoking nn with the -g option will always repeat the query for a group to enter until
you quit explicitly. (Same as setting the -r option permanently).
report-cost (boolean, default true)
This variable is ignored unless nn is running with accounting enabled (see nnacct). When set, nn
will report the cost of the current session and the total on exit.
response-check-pause pause (integer, default 2)
Specifies the number of seconds to wait after posting an article to see whether the action *might*
have failed. Some commands run in the background and may thus not have completed during this
period, so even when nn says "Article posted", it may still fail (in which case you are informed
via mail).
response-default-answer action (string, default "send")
The default action to be taken when hitting return to the "response action" prompt (abort, edit,
send, view, write). If it is unset, no default action is defined.
retain-seen-status (boolean, default false)
Normally, seen articles will just be unread the next time the group is entered (unless they were
marked read by auto-junk-seen). If retain-seen-status is set, the seen attribute on the articles
will survive to the next time the group is entered. (This is not recommended because it may
result in very large select files).
retry-on-error times (integer, default 0)
When set, nn will try the specified number of times to open an article before reporting that the
article does not exist any more. This may be necessary in some network environments.
save-closed-mode mode (integer, default 13)
When saving an article in selection mode (i.e. by selecting it from the menu), nn will simply save
the specified article if the article's subject is open. When the selected menu entry is a closed
subject, the save-closed-mode variable determines how many articles among the closed articles
should be saved:
0: save root article (the one on the menu) only
1: save selected articles within subject
2: save unread (excl selected) articles within subject
3: save selected+unread articles within subject
4: save all articles within subject
If `10' is added to the above values, nn will not save the selected subject immediately; instead
it will ask which articles to save using the above value as the default answer.
save-counter format (string, default "%d")
This is the printf-format which nn uses to create substitution string for the trailing * in save
file names. You can set this to more complex formats if you like, but be sure that it will
produce different strings for different numbers. An alternative format which seems to be popular
is ".%02d" .
save-counter-offset N (integer, default 0)
Normally, file names created with the part.* form will substitute the * with successive numbers
starting from one. Setting this variable will cause these numbers to start from N+1.
save-header-lines fields (string, default "FDNS")
Specifies the list of header fields that are saved when an article is saved via the O {save-short}
command. The fields specification is described in the section on Customized Article Headers
below.
save-report (boolean, default true)
When set, a message reporting the number of lines written is shown after saving an article. Since
messages are shown for a few seconds, this may slow down the saving of many articles (e.g. using
the S* command).
scroll-clear-page (boolean, default true)
Determines whether nn clears the screen before showing each new page of an article.
scroll-last-lines N (integer, default 0)
Normally, nn will show each new page of an article from the top of the screen (with proper marking
of the overlap). When this variable is set to a negative value, nn will scroll the text of the
new pages from the bottom of the screen instead. If it is set to a positive value, nn will show
pages from the top as usual, but switch to scrolling when there are less than the specified number
of lines left in the article.
select-leave-next (boolean, default false)
When set, you will be asked whether to select articles with the leave-next attribute on entry to a
group with left over articles.
select-on-sender (boolean, default false)
Specifies whether the find (=) command in article selection mode will match on the subject or the
sender.
shading-on code... (control string, default not set)
Specifies the escape code to be sent to the terminal to cause "shading" of the following output to
the screen. This is used if the mark-overlap-shading is set, and by the `+' attribute in the
header-lines variable.
shading-off code... (control string, default not set)
Specifies the escape code to be sent to the terminal to turn off the shading defined by shading-
on. Shading will typically be done by changing the foreground colour to change, e.g.
on term ti924-colour
set shading-on ^[ [ 3 2 m
set shading-off ^[ [ 3 7 m
set mark-overlap-shading
unset mark-overlap
end
shell program (string, default $SHELL)
The shell program used to execute shell escapes.
shell-restrictions (boolean, default false)
When set (in the init file), nn will not allow the user to invoke the shell in any way, including
saving on pipes. It also prevents the user from changing certain variables containing commands.
show-purpose-mode N (integer, default 1)
Normally, nn will show the purpose of a group the first time it is read, provided a purpose is
known. Setting this variable, this behaviour can be changed as follows:
0: Never show the purpose.
1: Show the purpose for new groups only.
2: Show the purpose for all groups.
When NNTP is being used, a setting of 0 prevents the newsgroups purpose data from being read from
the server; this can be helpful when using a slow link, since the data can often be hundreds of
KBytes long.
sign-type (string, default pgp)
What program nn will use to sign messages via the Sign command. Only pgp and gpg are currently
valid.
silent (boolean, default false)
When set, nn won't print the logo or "No News" if there are no unread articles. Only useful to
set in the init file or with the -Q option.
slow-mode (boolean, default false)
When set, nn will cut down on the screen output to give better response time at low speed.
Normally, nn will use standout mode (if possible) to mark selected articles on the menu, but when
slow-mode is set, nn will just put an asterisk `*' next to the article identifier on selected
articles. Also when slow-mode is set nn will avoid redrawing the screen in the following cases:
After a goto-group command an empty menu is shown (hit space to make it appear), and after
responding to an article, only the prompt line is shown (use ^L to redraw the screen). To avoid
redrawing the screen after an extended command, set the delay-redraw variable as well.
slow-speed speed (integer, default 1200)
If the terminal is running at this baud rate or lower, the on slow (see the section on init files)
condition will be true, and the on fast will be false (and vice-versa).
sort (boolean, default true)
When set, nn will sort articles according to the current sort-mode on entry to a group.
Otherwise, articles will be presented in order of arrival. If not set on entry to a menu for
merged groups, the articles from each group will be kept together on the menu. If sort is unset
while merged groups are presented on the menu, the articles will be reordered by local article
number (which may not keep articles from the same group together).
sort-mode mode (integer, default 1)
The default sort algorithm used to sort the articles on entry to a news group. It is a numeric
value corresponding to one of the sorting methods described in connection with the :sort command:
0 - arrival (ordered by article number)
1 - subject (subjects ordered after age of first article)
2 - lexical (subjects in lexicographical order)
3 - age (articles ordered after posting date only)
4 - sender (articles ordered after sender's name)
spell-checker shell-command (string, default not set)
When set, responses can be checked for spelling mistakes via the (i)spell action. The command to
perform the spelling is given the file containing the full article including header as its only
argument. If the spell checker can fix spelling mistakes, it must apply the changes directly to
this file.
split (boolean, default true)
When set, digests will automatically and silently be split into sub-articles which are then
handled transparently as normal articles. Otherwise, digests are presented as one article (which
you can split on demand with the G command).
stop lines (integer, default not set)
When stop is set, nn will only show the first lines lines of the of each article before prompting
you to continue. This is useful on slow terminals and modem lines to be able to see the first few
lines of longer articles (and skipping the rest with the n command).
subject-match-limit length (integer, default 256)
Subjects will be considered identical if their first length characters match. Setting this
uncritically to a low value may cause unexpected results!
subject-match-offset offset (integer, default 0)
When set to a positive number, that many characters at the beginning of the subject will be
ignored when comparing subjects for ordering and equality purposes.
subject-match-parts (boolean, default false)
When set, two subjects will be considered equal if they are identical up to the first (differing)
digit. Together with the subject-match-offset variable, this can be used in source groups where
the subject often has a format like:
vXXXXXX: Name of the package (Part 01/04)
Setting subject-match-offset to 8 and subject-match-parts to true will make nn consider all four
parts of the package having the same subject (and thus be selectable with `*').
Notice that changing the subject-match-... variables manually will not have an immediate effect.
To reorder the menu, an explicit :sort command must be performed. These variables are mainly
intended to be set using the :local command in on entry macros for source and binary groups (entry
macros are evaluated before the menu is collected and sorted).
subject-match-minimum characters (integer, default 4)
When set to a positive number, that many characters at the beginning of the subject must match
before the subject-match-parts option comes into affect. This is important, because the part
matching causes the rest of the line to be ignored after the first digit pair is discovered. This
begins after any subject-match-offset has been applied.
suggest-default-save (boolean, default true)
When set, nn will present the default-save-file when prompting for a save file name in a group
without a specific save file, or folder-save-file when saving from a folder. When not set, no
file name is presented, and to use the default save file, a single + must be specified.
tidy-newsrc (boolean, default false)
When set, nn will automatically remove lines from .newsrc which represent groups not found in the
active file or unsubscribed groups if keep-unsubscribed is not set.
time (boolean, default true)
When set, nn will show the current time in the prompt line. This is useful on systems without a
sysline (1) utility.
trace-folder-packing (boolean, default true)
When set, a trace of the retained and deleted messages is printed when a folder is rewritten.
trusted-escape-codes codes (string, default none)
When set to a list of one or more characters, nn will trust and output escape characters in an
article if it is followed by one of the characters in the list. For example, to switch to or from
kanji mode, control codes like "esc $" and "esc ( J" may be present in the text. To allow these
codes, use the following command:
set trusted-escape-codes ($
You can also set it to all to pass all escape codes through to the screen. Notice that nn thinks
all characters (including esc) output to the screen as occupy one column.
unshar-command shell-command (string, default "/bin/sh")
This is the command which is invoked by the unshar command.
unshar-header-file file (string, default "Unshar.Headers")
The name of the file in which the header and initial text of articles unpacked with the :unshar
command is saved. Unless the file name starts with a `/', the file will be created in the same
directory as the unpacked files. The information is not saved if this variable is not set.
Setting it to "Unshar.Result" will cause the headers and the results from the unpacking process to
be merged in a meaningful way (unless mmdf-format is set).
unsubscribe-mark-read (boolean, default true)
When set, unsubscribing to a group will automatically mark all current articles read; this is
recommended to keep the size of .newsrc down. Otherwise, unread articles in the unsubscribe
groups are kept in .newsrc. If keep-unsubscribed is false, this variable has no effect.
update-frequency (integer, default 1)
Specifies how many changes need to be done to the .newsrc or select files before they are written
back to disk. The default setting causes .newsrc to be updated every time a group has been read.
use-editor-line (boolean, default true)
Most editors accept arguments of the form:
editor [-arguments] +n filename
where editor is the name of the editor, and n is the line number to put the cursor upon entering
the file. If use-editor-line is false, it will not add the "+n" to the arguments.
use-path-in-from (boolean, default false)
When mail-format is set, saved articles will be preceded by a specially formatted "From " line:
From origin date
Normally, the origin will be the name of the news group where the article appeared, but if use-
path-in-from is set, the contents of the "Path:" header will be used as the origin.
use-selections (boolean, default true)
When set, nn uses the selections and other article attributes saved last time nn was used. If not
set, nn ignores the select file.
visible-bell (boolean, default true)
When set, nn will flash the screen instead of "ringing the bell" if the visible bell (flash)
capability is defined in the termcap/terminfo database.
window size (integer, default not set)
When set, nn will reserve the last size lines of the menu screen for a preview window. If not
set, nn will clear the screen to preview an article if there are less than min-window lines at the
bottom of the screen. As a side effect, it can also be used to reduce the size of the menus,
which may be useful on slow terminals.
word-key key (key, default ^W)
The key which erases the last input component or word when nn is prompting for a string, e.g. the
last name in a path name.
wrap-header-margin size (integer, default 6)
When set (non-negative), the customized header fields specified in header-lines will be split
across several lines if they don't fit on one line. When size is greater than zero, lines will be
split at the first space occurring in the last size columns of the line. If not set (or
negative), long header lines will be truncated if they don't fit on a single line.
CUSTOMIZED ARTICLE HEADER PRESENTATION
Normally, nn will just print a (high-lighted) single line header containing the author, subject, and date
(optional) of the article when it is read.
By setting the header-lines variable as described below, it is possible to get a more informative multi
line header with optional high-lighting and underlining.
The header-lines variable is set to a list of header line identifiers, and the customized headers will
then contain exactly these header lines in the specified order.
The same specifications are also used by the :print and save-short commands via the print-header-lines
and save-header-lines variables.
The following header line identifiers are recognized in the header-lines, print-header-lines, and save-
header-lines variables:
A Approved:
a Spool-File:(path of spool file containing the article)
B Distribution:
C Control:
D Date:
d Date-Received:
F From:
f Sender:
G Newsgroup:(current group)
g Newsgroup:(current group if cross-posted or merged)
I Message-Id:
K Keywords:
L Lines:
N Newsgroups:
n Newsgroups: (but only if cross posted)
O Organization:
P Path:
R Reply-To:
S Subject:
v Save-File:(the default save file for this article)
W Followup-To:
X References:
x Back-References:
Y Summary:
The 'G' and 'g' fields will include the local article number if it is known, e.g.
Newsgroup: news.software.nn/754
The following special symbols are recognized in the header-lines variable (and ignored otherwise):
Preceding the identifier with an equal sign "=" or an underscore "_" will cause the header field contents
to be high-lighted or underlined.
A plus sign "+" will use the shading attribute defined by shading-on and shading-off to high-light the
field contents. If no shading attribute is defined it will underline the field instead.
Including an asterisk "*" in the list will produce the standard one line header at that point.
Example: The following setting of the header-lines variable will show the author (underlined),
organization, posting date, and subject (high-lighted) when articles are read:
set header-lines _FOD=S
COMMAND LINE OPTIONS
Some of the command line options have already been described, but below we provide a complete list of the
effect of each option by showing the equivalent set, unset, or toggle command.
Besides the options described below, you can set any of nn's variables directly on the command line via
an argument of the following format:
variable=value
To set or unset a boolean variable, the value can be specified as on or off (t and f will also work).
Notice that the init files are read before the options are parsed (unless you use the -I option).
Therefore, the options which are related to boolean variables set in the init file will toggle the value
set there, rather than the default value. Consequently, the meaning of the options are also user-
defined.
The explanations below describe the effect related to the default setting of the variables, with the
`reverse' effect in square brackets.
-aN {set limit N}
Limit the maximum number of articles presented in each group to N. This is useful to get up-to-
date quickly if you have not read news for a longer period.
-a0 Mark all unread articles as read. See the full explanation at the beginning of this manual.
-B {toggle backup}
Do not [do] backup the rc file.
-d {toggle split}
Do not [do] split digests into separate articles.
-f {toggle fsort}
Do not [do] sort folders according to the subject (present the articles in a folder in the
sequence in which they were saved).
-g Prompt for the name of a news group or folder to be entered
-i {toggle case-fold-search}
Normally searches with -n and -s are case independent. Using this option, the case becomes
significant.
-I Do not read the init file. This must be the first option!! The global setup file is still read.
-Ifile-list
Specifies an alternate list of init files to be loaded instead of the standard global and private
init files. The list is a comma-separated list of file names. Names which does not contain a `/'
are looked for in the ~/.nn directory. An empty element in the list is interpreted as the global
init file. The list of init files must not be separated from the -I option by blanks, and it must
be the first option. Example: The default behaviour corresponds to using -I,init (first the
global file, then the file ~/.nn/init). The global setup file is still read as the first init
file independently of the -I option used.
-k {toggle kill}
Do not [do] perform automatic kill and selection of articles.
-lN {set stop N}
Stop after printing the first N lines of each article. This is useful on slow terminals.
-L[f] {set layout f}
Select alternative menu layout f (0 to 4). If f is omitted, menu layout 3 is selected.
-m {no corresponding variable}
Merge all articles into one `meta group' instead of showing them one group at a time. When -m is
used, no articles will be marked as read.
-nWORD Collect only articles which contain the string WORD in the sender's name (case is ignored). If
WORD starts with a slash `/', the rest of the argument is used as a regular expression instead of
a fixed string.
-N {no corresponding variable}
Disable updating of the rc file. This includes not recording that groups have been read or
unsubscribed to (although nn will think so until you quit).
-q {toggle sort}
Do not [do] sort the articles (q means quick, but it isn't any quicker in practice!)
-Q {toggle silent}
Quiet mode - don't [do] print the logo or "No News" messages.
-r {toggle repeat-group-query}
Make -g repeat query for a group to enter.
-sWORD Collect only articles which contain the string WORD in their subject (case is ignored). If WORD
starts with a slash `/', the rest of the argument is used as a regular expression instead of a
fixed string.
-S {toggle repeat}
Do not [do] eliminate duplicated subject lines on menus.
-T {toggle time}
Do not [do] show the current time in the prompt line.
-w[N] {set window N}
Reserve N lines of the menu screen for a preview window. If N is omitted, the preview window is
set to 5 lines.
-W {toggle confirm-messages}
[Don't] Wait for confirmation on all messages.
-x[N] {set old N}
Present (or scan) all (or the last N) unread as well as read articles. This will never mark
unread articles as read.
-X {no corresponding variable}
Read/scan unsubscribed groups also. Most useful when looking for a specific subject in all
groups, e.g.
nn -mxX -sSubject all
MACRO DEFINITIONS
Practically any combination of commands and key strokes can be defined as a macro which can be bound to a
single key in menu and/or reading mode.
The macro definition must specify a sequence of commands and key strokes as if they were typed directly
from the keyboard. For example, a string specifying a file name must follow a save command. This manual
does not give a complete specification of all the input required by the various commands; it is
recommended to execute the desired command sequence from the keyboard prior to defining the macro to get
the exact requirements of each command.
Although it is possible to define temporary macros interactively using the :define command, macro
definitions are normally placed in the init file. Macros are numbered from 0 to 100, i.e. it is possible
to define a total of 101 different macros (implicit macros defined with the map command uses internal
numbers from 101 to 200).
To define macro number M, the following construction is used (the line breaks are mandatory):
define M
body
end
The body consists of a sequence of tokens separated by white space (blanks or newlines). However,
certain tokens continue to the end of the current line.
The following tokens may occur in the macro body:
Comments
Empty lines and text following a # character (preceded by white space) is ignored.
Command Names
Any command name listed in the key mapping section can be included in a macro causing that command
to be invoked when the macro is executed.
Extended Commands
All the extended commands which can be executed through the command command (normally bound to the
: key) can also be executed in a macro. An extended command starts with a colon (:) and continues
to the end of the current line. Example:
:show groups total
Key Strokes
A key stroke (which is normally mapped into a command depending on the current mode) is specified
as a key name enclosed in single quotes. Examples (A-key, left arrow key, RETURN key):
'A' 'left' '^M'
Shell Commands
External commands can be invoked as part of a macro execution. There are two forms of shell
command invocations available depending on whether a command may produce output or require user
input, or it is guaranteed to complete without input or output to the terminal. The difference is
that in the latter case, nn does not prepare the terminal to be used by another program. When the
command completes, the screen is not redrawn automatically; you should use the redraw command to
do that. The tho forms are:
:!echo this command uses the terminal
:!!echo this command does not > /tmp/file
Strings
Input to commands prompting for a string, e.g. a file name, can be specified in a macro as a
double quoted string. Example (save without prompting for a file name):
save-short "+$G"
Conditionals
Conditionals may occur anywhere in a macro; a conditional is evaluated when the macro is executed,
and if the condition is false the rest of the current line is ignored. The following conditionals
are available:
?menu True in menu mode
?show True in reading mode
?folder True when looking at a folder
?group True when looking at a news group
?yes Query user, true if answer is yes
?no Query user, true if answer is no
Example (stop macro execution if user rejects to continue):
prompt "continue? " ?no break
In addition to these conditionals, it is possible to test the current value of boolean and integer
variables using the following form:
?variable=value
This conditional will be true (1) if the variable is an integer variable whose current value is
the one specified, or (2) if the variable is a boolean variable which is either on or off.
Examples:
?layout=3 :set layout 1
?monitor=on break
?sort=off :sort age
break Terminate macro execution completely. This includes nested macros. Example (stop if looking at a
folder):
?folder break
return Terminate execution of current macro. If the current macro is called from another macro,
execution of that macro continues immediately.
input Query the user for a key stroke or a string, for example a file name. Example (prompt the user
for a file name in the usual way):
save-short input
yes Confirm unconditionally if a command requires confirmation. It is ignored if the command does not
require confirmation. Example (confirm creation of new files):
save-short "+$G" yes
no Terminate execution of current macro if a command requires confirmation; otherwise ignore it. If
neither yes nor no is specified when a command requires confirmation, the user must answer the
question as usual - if the user confirms the action execution continues normally; otherwise the
execution of the current macro is terminated. Example (do not create new files):
save-short "+$L/misc" no
prompt string
Print the string in the prompt line (highlighted). The string must be enclosed in double quotes.
Example:
prompt "Enter recipient name"
When the macro terminates, the original prompt shown on entry to the macro will automatically be
redrawn. If this is not desirable (e.g. if the macro goes from selection to reading mode), the
redrawing of the prompt can be disabled by using a prompt command with an empty string ("").
Example:
prompt "Enter reading mode?" # old prompt is saved
?no return # and old prompt is restored
read-skip # changes the prompt
prompt "" # so forget old prompt
echo string
Display the string in the prompt line for a short period. Example:
?show echo "Cannot be used in reading mode" break
puts string-to-end-of-line
The rest of the line is output directly to the terminal without interpretation.
macro M
Invoke macro number M. The maximum macro nesting level is five (also catches macro loops).
I use the following macro to quickly save all the selected files in a file whose name is entered as
usual. It also works in reading mode (saving just the current article).
define 1
:unset save-report
save-short input yes
?menu '+'
:set save-report
end
KEY MAPPINGS
The descriptions of the keys and commands provided in this manual reflects the default key mappings in
nn. However, you can easily change these mappings to match your personal demands, and it is also
possible to remap keys depending on the terminal in use. Permanent remapping of keys must be done
through the init file, while temporary changes (for the duration of the current invocation of nn) can be
made with the :map command.
The binding and mapping of keys are controlled by four tables:
The multikey definition table
This table is used for mapping multicharacter key sequences into single characters. By default
the table contains the mappings for the four cursor keys, and there is room for 10 user-defined
multikeys. The fourteen multikeys are named: up, down, right, left (the four arrow keys), and #0
through #9 for the user-defined keys.
Multikey #i (where i is a digit or an arrow key name) is defined using the following command:
map #i key-sequence
where the sequence is a list of 7-bit character names (see below) separated by spaces. For
example, if the HOME key sends the sequence ESC [ H, you can define multikey #0 to be the home key
using the command:
map #0 ^[ [ H
The input key mapping table
All characters that are read from the keyboard will be mapped through the input mapping table.
Consequently, you can globally remap one key to produce any other key value. By default all keys
are mapped into themselves.
An entry in the input key mapping table to map input-key into new-key is made with the command
map key input-key new-key
For example, to make your ESC key function as interrupt you can use the command
map key ^[ ^G
The selection mode key binding table
This table defines for each key which command should be invoked when that key is pressed in
selection mode, i.e. when the article menu is shown. The command to bind a key to a command in
selection mode is:
map menu key command
For example, to have the HOME key defined as multikey #0 above bound to the select command, the
following command is used:
map menu #0 select
To remap a key to select a specific article on the menu (which the `a' through `z' keys do by
default), the command must be specified as `article N' where N is the entry number on the menu
counted from zero (i.e. a=0, b=1, ..., z=25, 0=26, ..., 9=35). For example, to map `J' to select
article `j', the following command is used:
map menu J article 9
The reading mode key binding table
This table defines for each key which command should be invoked when that key is pressed in
reading mode, i.e. when the article text is shown. The command to bind a key to a command in
reading mode is:
map show key command
In addition to the direct mappings described above, the following variations of the map command are
available:
User defined keymaps
Additional keymaps can be defined using the command
make map newmap
This will create a new keymap which can initialized using normal map commands, e.g.
map newmap key command
To activate a user-defined keymap, it must be bound to a prefix key:
map base-map prefix-key prefix newmap
When used, the prefix key itself does not activate a command, but instead it require another key
to be entered and then execute the command bound to that key in the keymap which is bound to the
prefix key.
For example, to let the key sequence "^X i" execute macro number 10 in both modes, the following
commands can be used:
make map ctl-x
map ctl-x i macro 10
map both ^X prefix ctl-x
Mapping keys in both modes
Using the pseudo-keymap `both', it is possible to map a key to a command in both selection and
reading mode at once. For example, to map the home key to macro number 5 in both modes, the
following command can be used:
map both #0 macro 5
Aliasing
A key can also be mapped directly to the command currently bound to another key. Later remapping
of the other key will not change the mapping of the `aliased' key. This is done using the
following command:
map keymap new-key as old-key
Binding macros to keys
A previously defined macro can be bound to a key using the command:
map keymap key macro macro-number
Implicit macro definitions
An implicit macro can also be defined directly in connection with the map command:
map keymap key (
body...
)
Keys and character names are specified using the following notation:
C A single printable character represents the key or character itself.
^C This notation represents a control key or character. DEL is written as ^?
125, 0175, 0x7D
Characters and keys can be specified by their ordinal value in decimal, octal, and hexadecimal
notation.
up, down, right, left
These names represent the cursor keys.
#0 through #9
These symbols represent the ten user-defined multikeys.
If the variable data-bits is 7, key maps can specify binding of all keys in the range 0x00 to 0x7F, and
the 8th bit will be stripped in all keyboard input. If the variable data-bits is 8, the 8th bit is not
cleared, and key maps are extended to allow binding of keys in the range 0xA0 to 0xFE (corresponding to
the national characters defined by the ISO 8859 character sets). Binding commands to these keys can be
done either by using their numeric value, or directly specifying the 8 bit character in the map command,
e.g.
map menu 0xC8 macro 72
--
STANDARD KEY BINDINGS
Below is a list of all the commands that can be bound to keys, either in selection mode, in reading mode,
or both. For each command the default command key bindings in both modes are shown. If the key is not
bound in one of the modes, but it can be bound, the corresponding part will just be empty. If the
command cannot be bound in one of the modes, that mode will contain the word nix.
Function Selection mode Reading mode
advance-article nix a
advance-group A A
article N a-z0-9 nix
back-article nix b
back-group B B
cancel C C
command : :
compress nix c
continue space space
continue-no-mark return nix
decode
find = /
find-next nix .
follow F fF
full-digest nix H
goto-group G G
goto-menu nix = Z
help ? ?
junk-articles J nix
kill-select K K
layout " nix
leave-article nix l
leave-next L L
line+1 , down return
line-1 / nix
line=@ nix g
macro M
mail M m M
message ^P ^P
next-article nix n
next-group N N
next-subject nix k
nil
overview Y Y
page+1 > nix
page+1/2 nix d
page-1 < delete backspace
page-1/2 nix u
page=0 nix h
page=1 ^ ^
page=$ $ $
patch
post
preview % %
previous P p
print P
quit Q Q
read-return Z nix
read-skip X X
redraw ^L ^R ^L ^R
reply R r R
rot13 nix D
save-full S s S
save-short O o O
save-header E e E
save-body W w W
select . nix
select-auto + nix
select-invert @ nix
select-range - nix
select-subject * *
shell ! !
skip-lines nix tab
unselect-all ~ nix
unshar
unsub U U
version V V
See the descriptions of the default bindings for a description of the commands. The pseudo command nil
is used to unbind a key.
THE INIT FILES
The init files are used to customize nn's behaviour to local conventions and restrictions and to satisfy
each user's personal taste.
Normally, nn reads up to three init files on start-up if they exist (all init files are optional):
$LIB/setup
A system-wide file located in the library directory. This file is always loaded before any other
init file (even when the -I option is specified). It cannot contain a group presentation
sequence.
$LIB/init
Another system-wide (global) init file located in the library directory. This file may be ignored
via the -I option.
~/.nn/init
The private init file located in the user's .nn directory. It is read after the global init file
to allow the user to change the default setup.
The init file is parsed one line at a time. If a line ends with a backslash `\', the backslash is
ignored, and the following line is appended to the current line.
The init file may contain the following types of commands (and data):
Comments
Empty lines and lines with a # character as the first non-blank character are ignored. Except
where # has another meaning defined by the command syntax (e.g. multi-keys are named #n), trailing
comments on input lines are ignored.
Variable settings
You can set (or unset) all the variables described earlier to change nn's behaviour permanently.
The set and unset commands you can use in the init file have exactly the same format as the :set
and :unset commands described earlier (except that the : prefix is omitted.)
Variables can also be locked via the lock command; this is typically done in the setup file to
enforce local policies.
Key mappings
You can use all the versions of the map command in the init file.
Macro Definitions
You can define sequences of commands and key strokes using the define...end construction, which
can then be bound to single keys with the map command.
Load terminal specific files
You can load a terminal specific file using the
load file
The character @ in the file will be replaced by the terminal type defined in the TERM environment
variable. nn silently ignores the load command if the file does not exist (so you don't have to
have a specific init file for terminals which does not require remapping). If the file is not
specified by an absolute pathname, it must reside in your ~/.nn directory. Examples:
# load local customizations
load /usr/lib/nninit
# load personal terminal specific customizations
load init.@
Switch to loading a different init file
You can skip the rest of the current init file and start loading a different init file with the
following command:
chain file
If this occur in the private or global init file, the chained init file may contain a sequence
part which will replace the private or global presentation sequence respectively.
Stop loading current init file
You can skip the rest of the current init file with the following command:
stop
Give error messages and/or terminate
If an error is detected in the init file, the following commands can be used to print an error
message and/or terminate execution:
error fatal error message...
Print the message and terminate execution.
echo warning message...
Print the message and continue.
exit [ status ]
Terminate nn with the specified exit status or 0 if omitted.
Change working directory of nn
You can use the cd command to change the working directory whenever you enter nn. Example:
# Use folder directory as working directory inside nn
cd ~/News
Command groups
The init file can contain groups of commands which are executed under special conditions. The
command groups are described in the section on command groups below.
One or more save-files sections
A save-files section is used to assign default save files to specific groups:
save-files
group-name (pattern) file-name
...
end
The group name (patterns) and save file names are specified in the same way as in the presentation
sequence (see below). Example:
save-files
news* +news/$L
comp.sources* /u/src/$L/
end
The news group presentation sequence
The last part of the init file may specify the sequence in which you want the news groups to be
presented. This part starts with the command sequence and continues to the end of the init file.
Both init files may contain a presentation sequence. In this case, the global sequence is appended to
the private sequence.
COMMAND GROUPS
Command groups may only occur in the init file, and they provide a way to have series of commands
executed at certain points during news reading.
In release 6.4 onwards, these possibilities are still rather rudimentary, and a mixture of normal init
file syntax and macro syntax is used depending on whether the command group is only executed on start-up
or several times during the nn session.
A command group begins with the word on and ends with the word end. The following command groups are
conditionally executed during the parsing of the init file if the specified condition is true. They may
also have an optional else part which is executed if the condition is false:
on condition
commands
[ else
commands ]
end
The following conditional command groups may be used in the init file to be executed at start-up:
on [ test ]
The commands (init file syntax) in the group are executed only if the specified test is true. A
shell is spawned to execute the command "[ test ]", so all the options of the test(1) command is
available. For example, to unset the flow-control variable if the tty is a pseudo-tty, the
following conditional can be used:
on [ -n "`tty | grep ttyp`" ]
unset flow-control
end
on !shell command
The command group is executed if the given shell command exits with 0 status (success). Care
should be taken that the command does not produce any output, e.g. by redirecting its output to
/dev/null. For example, to prevent people from reading news if load is above a specific level,
the following conditional might be placed in the global setup file.
on !load-above 5
error load is too high, try again later.
end
on `shell command` string...
The command group is executed if the first output line from executing the specified shell command
is listed among the specified string values. The shell command can be omitted on subsequent
occurrences of this conditional, in which case the output from the last shell command is used.
For example, the following conditional can be used to switch to an init file which has a limited
sequence for news reading during working hours, evenings, and nights:
on `date +%H` 9 10 11 12 13 14 15 16
chain init.work
end
on `` 17 18 19 20 21
chain init.evening
else
chain init.night
end
on `` string...
This is equivalent to the previous form except that instead of executing a shell command, the
output from the previous
on $variable [ value ]
If no value strings are specified, the command group is executed if the given variable is defined
in the environment. Otherwise, the command group is executed only if the value of the variable
occur in the value list. For example, if you want nn to look for mail in whatever $MAIL is set to
- if it is set - you can use the following code:
on $MAIL
set mail $(MAIL)
end
on slow
The commands (init file syntax) in the group are executed only if the current terminal output
speed is less than or equal to the baud rate set in the slow-speed variable. This can be used to
optimize the user-interface for slow terminals by setting suitable variables:
on slow
set confirm-entry
set slow-mode
set delay-redraw
unset visible-bell
set compress
unset header-lines
set stop 5
set window 10
end
on fast
Same as on slow except that the commands are only executed when the terminal is running at a speed
above the slow-speed value.
on term term-type...
The commands are executed if one of the term-type names is identical to value of the TERM
environment variable.
on host host-name...
The commands are executed if the local host's name occur in the host-name list.
on program program-name...
The commands are executed if the current program (nn, nncheck, etc) in the program-name list.
The following on command groups are really macros which may be executed during nn's normal processing,
and as such they cannot have an else part.
on entry [ group list ]
These commands (macro format!) are executed every time nn enters a news group. If a group list is
not specified, the commands are associated with all groups which don't have its own entry macro
specified in the group sequence. Otherwise, the entry macro will be associated with the groups in
the list. The group list is specified using the meta-notations described in the presentation
sequence section.
All `:' commands at the beginning of the command group are executed before nn collects the
articles in the group, so it is possible to set or unset variables like cross-post and auto-read-
mode-limit before any articles are collected and the menu is (not) shown.
The non-`:' commands, and `:' commands that follows a command of another type will be executed
immediately after the first menu page is presented. The execution of a `:' command can be
postponed by using a double `::' as the command prefix.
on entry comp.sources* alt.sources
:set cross-post on # set before collection
:local auto-read-mode-limit -1 # set before showing menu
::unset cross-post # set after collection
end
on start-up
These `:' commands (macro format!) are executed on start-up just before nn enters the first news
group. However, postponed commands (i.e. non-`:' commands) will not be executed until the first
group is shown (it works like an entry macro).
GROUP PRESENTATION SEQUENCE
News groups are normally presented in the sequence defined in the system-wide init file in nn's library
directory.
You can personalize the presentation sequence by specifying an alternative sequence in the private init
file. The sequence in the private init file is used before the global presentation sequence, and need
only describe the deviations from the default presentation sequence.
The presentation sequence must start with the word
sequence
followed by a list of the news group names in the order you want them to be presented. The group names
must be separated by white space. The sequence list must be the last part of the init file (the parsing
of commands from the init file stops when the word sequence is encountered).
You may use a full group name like "comp.unix.questions", or just the name of a main group or subgroup,
e.g. "comp" or "comp.unix". However, if "comp" precedes "comp.unix.questions" in the list, this subgroup
will be placed in the normal alphabetic sequence during the collection of all the "comp" groups.
Groups which are not explicitly mentioned in any of the sequence files will be placed after the mentioned
groups, unless `!!' is used and it has not been disabled (as described below).
Each group name may be followed by a file or folder name (must start with either of `/' `~' or `+') which
will specify the default save file for that group (and its subgroups). A single `+' following the group
name is an abbreviation for the last save file name used. For example, the following two sequences are
equivalent:
group1 +file group2 +file group3 +file
group1 +file group2 + group3 +
When an article is saved, the default save name will be used as the initial contents of the file name
prompt for further editing. It therefore does not need to be be a complete file name (unless you use the
quick save mode).
Each group name may also be associated with a so-called entry action. This is basically an (unnamed)
macro which is invoked on entry to the group (following the same rules as the `on entry' command group
related to :set and :unset commands).
The entry action begins with a left parenthesis `(' and ends with a right parenthesis `)' on an otherwise
empty line:
comp.sources. +src/$L/ (
:set cross-post
)
The last entry action can be repeated by specifying an empty set of parenthesis, e.g.
comp.unix. +unix ()
The entry action of a preceding group in the sequence can be associated with the current group(s) by
specifying the name of the group in the parentheses instead of the commands, e.g.
comp.unix. +unix (comp.sources.unix)
A macro can also be associated with the entry action by specifying its number in the same way as the
group name above, e.g.
rec.music. +music (30)
Notice that it is the current definition of the macro which is associated with the group, so if the macro
is later redefined with the `:define' command, it will not have any effect on the entry action.
Group names can be specified using the following notations:
group.name
Append the group (if it exists) to the presentation sequence list. If also-subgroups is set
(default), all subscribed subgroups of the group will be included as well (if there are any).
Examples: "comp", "comp.unix", "comp.unix.questions". If the group does not exits (e.g. "comp"),
the subgroups will be included even when also-subgroups is not set, i.e. "comp" is equivalent to
"comp.".
group.name.
Append the subgroups of the specified group to the presentation sequence. The group itself (if it
exists) is not included. Examples: "comp.", "comp.unix.".
.group.name
Append the groups whose name ends with the specified name to the sequence. Example: ".test".
group.name*
Append the group and its subgroups to the presentation sequence list (even when also-subgroups is
not set). Example: "comp.unix*".
The following meta notation can be used in a sequence file. The group.name can be specified using any of
the forms described above:
! groups
Completely ignore the group or groups specified unless they are already in the presentation
sequence (i.e. has been explicitly mentioned earlier in the sequence).
!:code groups
Ignore a selection of groups based on the given code letter (see below), unless they are already
included in the sequence. Notice that these forms only excludes groups from the presentation
sequence, i.e. they do not include the remaining groups at this point; that must be done
explicitly elsewhere.
!:U groups
Ignore unsubscribed groups, i.e. if they are neither new, nor present and subscribed in .newsrc.
This is useful to ignore a whole hierarchy except for a few groups which are explicitly mentioned
in .newsrc and still see new groups as they are created.
!:X groups
Ignore unsubscribed and new groups, i.e. if they are not currently present and subscribed in
.newsrc. This is useful to ignore a whole hierarchy except for a few groups which are explicitly
mentioned in .newsrc. New groups in the hierarchy are ignored unless `NEW' occurs earlier in the
sequence.
!:O groups
Ignore old groups, i.e. unless they are new. This is useful to ignore a whole hierarchy but still
see new groups which are created in the hierarchy (it might become interesting some day).
Individual groups can still be included in the sequence if they are specified before the `!:O'
entry.
!:N groups
Ignore new groups in the hierarchy.
!! Stop building the presentation sequence. This eliminates all groups that are not already in the
presentation sequence.
NEW This is a pseudo group name which matches all new groups; you could place this symbol early in
your presentation sequence to see new groups `out of sequence' (to attract your attention to
them).
RC This is a pseudo group name which matches all groups occurring in the .newsrc file. It will cause
the groups in .newsrc to be appended to the presentation sequence in the sequence in which they
are listed in .newsrc.
RC:number
Similar to the RC entry, but limited to the first number lines of the .newsrc file. Example:
RC:10 (use 10 lines of .newsrc).
RC:string
Similar to the RC entry, but limited to the lines up to (and including) the first line (i.e.
group) starting with the given string. For example: RC:alt.sources
< group.name
Place the group (and its subgroups) at the beginning of the presentation sequence. Notice that
each `<' entry will place the group(s) at the beginning of the current sequence, i.e. < A < B < C
will generate the sequence C B A.
> group.name
Place the group (and its subgroups) after all other groups that are and will be entered into the
presentation sequence.
@ Disable the `!!' command. This can be included in the personal presentation sequence if the
global sequence file contains a !! entry (see example 1 below).
% .... %
Starts and ends a region of the sequence where it is possible to include groups which has been
eliminated earlier. This may be useful to alter the sequence of some groups, e.g. to place
comp.sources.bugs after all other source groups, the following sequence can be used:
! comp.sources.bugs comp.sources* % comp.sources.bugs %
Example 1: In a company where ordinary users only should read the local news groups, and ignore the rest
(including new news groups which are otherwise always subscribed to initially), can use the following
global presentation sequence:
general
follow
! local.test
local
!!
The "expert" users in the company must put the @ command somewhere in their private sequence to avoid
losing news groups which they have not explicitly mentioned in their init file.
Example 2: This is the global sequence for systems with heavy news addicts who setup their own sequences
anyway.
# all must read the general news first
< general
# test is test, and junk is junk,
# so it is placed at the very end
> test
> .test
> junk
# this is the standard sequence which everybody may
# change to their own liking
local # our local groups
dk # the Danish groups
eunet.general # to present it before eunet.followup
eunet # the other European groups
comp # the serious groups
news # news on news
sci # other serious groups
rec # not really that important (don't quote me)
misc # well, it must be somewhere
# the groups that are not listed above goes here
Notice the use of comments in the sequence where they are allowed at the end of non-empty lines as well.
Example 3: My own presentation sequence (in the init file) simply lists my favourite groups and the
corresponding default save files:
sequence
!:U alt* # ignore unsubscribed alt groups
news.software.nn +nn
comp.sys.ti* +ti/$L
NEW # show new groups here
news*
rec.music.synth +synth/
comp.emacs*,gnu.emacs +emacs/misc
comp.risks +risks
eunet.sources +src/unix/
comp.sources* +src/$L/
The presentation sequence is not used when nn is called with one or more news group names on the command
line; it is thus possible to read ignored groups (on explicit request) without changing the init file.
(Of course, you can also use the G command to read ignored groups).
MERGING NEWS GROUPS
The third example above contains the following line:
comp.emacs*,gnu.emacs +emacs/misc
This is the syntax used to merge groups. When two or more groups are merged, all new articles in these
groups are presented together as if they were one group. To merge groups, their names must be listed
together in the sequence, and only separated by a single comma. To merge the groups resulting from a
single group pattern (e.g. comp.emacs*), the group pattern must be followed by a comma and a blank (e.g.
comp.emacs*, ...).
Merged groups are presented as the first group in the "list", and the word "MERGED" will be shown after
the group name. The Y {overview} command will still show merged groups as individual groups, but they
will be annotated with the symbol `&' on the first of the groups, and a `+' on the rest of the groups.
In the current version, the concept of the current group in connection with merged groups is a bit fuzzy.
This should only be noticeable with the G command, which will take the most recently used group among the
merged groups as the current group. So things like G = ... may not always work as expected.
ENVIRONMENT
The following environment variables are used by nn:
EDITOR. The editor invoked when editing replies, follow-ups, and composing mail. nn knows about the
following editors: vi, ded, GNU emacs, and micro-emacs, and will try to position the cursor on the first
line following the header, i.e. after the blank line which must not be deleted! If an article has been
included, the cursor is placed on the first line of the included text (to allow you to delete sections
easily).
LOGNAME. This is taken as the login name of the current user. It is used by nn to return failed mail.
If it is not defined, nn will use the value of USER, or if that is not defined either, nn will use the
call `who am i' to get this information. If all attempts fail, the failed mail is dropped in the bit
bucket.
PAGER. This is used as the initial value of the pager variable.
SHELL. This is the shell which is spawned if the system cannot suspend nn, and it will be used to
execute the shell escapes.
TERM. The terminal type.
NOTES
When NNTP is being used over a slow link (as with the ppp protocol and a modem), it may be desirable to
suppress the retrieval of the information about new newsgroups, and their purpose, since they can be
hundreds of KBytes in size. To do this, the new-group-action and show-purpose-mode variables should be
set to 0 in your init file. See the descriptions of those variables for more info.
Unfortunately, the list of active newsgroups is still fetched, since nn uses it to determine which groups
to check for new articles. Even this could be avoided, but the cost would be checking for new articles
in every group, which might well be slower overall, although startup would be faster.
FILES
~/.newsrc The record of read articles.
~/.nn/select The record of selected and seen articles.
~/.nn/init Personal configuration and presentation sequence.
~/.nn/kill The automatic kills and selections.
~/.nn/KILL.COMP The compiled kill file.
~/.nn/LAST The time stamp of the last new news group we have seen.
~/.nn/NEXTG Active group last time nn was quit.
~/.nn/.param Parameter file for the aux script
$lib/setup System-wide setup - always read first.
$lib/init System-wide setup and presentation sequence.
$lib/aux The response edit and send script.
$lib/routes Mapping rules for mail addresses (on non-domain systems).
$db/* The news data base.
/etc/termcap Terminal data base [BSD].
/usr/lib/terminfo/*Terminal data base [SysV].
/usr/local/lib/nntp_serverName of remote nntp server, if not changed by setting the environment variable
NNTPSERVER or the nntp-server variable on the command line.
The name $lib and $db are the directories used for the auxiliary files and the news data base
respectively. Their name and location is defined at compile time. Common choices are /usr/local/lib/nn
or /usr/lib/news/nn for $lib and /usr/spool/nn or /usr/spool/news/.nn for $db.
SEE ALSO
Other netnews documentation.
RFC 1341, MIME (Multipurpose Internet Mail Extensions)
nncheck(1), nngoback(1), nngrab(1), nngrep(1), nnpost(1), nntidy(1)
nnusage(1M), nnspew(8)
ORIGINAL AUTHOR
Kim F. Storm, Texas Instruments A/S, Denmark
CURRENT MAINTAINER
Michael T Pins mtpins@nndev.org
Binary file (standard input) matches